blob: 6affbfdd1dec1aeedb82dc53adbef3d182e33d02 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* System Control and Management Interface (SCMI) Message Protocol
* driver common header file containing some definitions, structures
* and function prototypes used in all the different SCMI protocols.
*
* Copyright (C) 2018-2022 ARM Ltd.
*/
#ifndef _SCMI_COMMON_H
#define _SCMI_COMMON_H
#include <linux/bitfield.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/hashtable.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/refcount.h>
#include <linux/scmi_protocol.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <asm/unaligned.h>
#include "protocols.h"
#include "notify.h"
#define SCMI_MAX_CHANNELS 256
#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
enum scmi_error_codes {
SCMI_SUCCESS = 0, /* Success */
SCMI_ERR_SUPPORT = -1, /* Not supported */
SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
SCMI_ERR_ENTRY = -4, /* Not found */
SCMI_ERR_RANGE = -5, /* Value out of range */
SCMI_ERR_BUSY = -6, /* Device busy */
SCMI_ERR_COMMS = -7, /* Communication Error */
SCMI_ERR_GENERIC = -8, /* Generic Error */
SCMI_ERR_HARDWARE = -9, /* Hardware Error */
SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
};
static const int scmi_linux_errmap[] = {
/* better than switch case as long as return value is continuous */
0, /* SCMI_SUCCESS */
-EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
-EINVAL, /* SCMI_ERR_PARAM */
-EACCES, /* SCMI_ERR_ACCESS */
-ENOENT, /* SCMI_ERR_ENTRY */
-ERANGE, /* SCMI_ERR_RANGE */
-EBUSY, /* SCMI_ERR_BUSY */
-ECOMM, /* SCMI_ERR_COMMS */
-EIO, /* SCMI_ERR_GENERIC */
-EREMOTEIO, /* SCMI_ERR_HARDWARE */
-EPROTO, /* SCMI_ERR_PROTOCOL */
};
static inline int scmi_to_linux_errno(int errno)
{
int err_idx = -errno;
if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
return scmi_linux_errmap[err_idx];
return -EIO;
}
#define MSG_ID_MASK GENMASK(7, 0)
#define MSG_XTRACT_ID(hdr) FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK GENMASK(9, 8)
#define MSG_XTRACT_TYPE(hdr) FIELD_GET(MSG_TYPE_MASK, (hdr))
#define MSG_TYPE_COMMAND 0
#define MSG_TYPE_DELAYED_RESP 2
#define MSG_TYPE_NOTIFICATION 3
#define MSG_PROTOCOL_ID_MASK GENMASK(17, 10)
#define MSG_XTRACT_PROT_ID(hdr) FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
#define MSG_TOKEN_ID_MASK GENMASK(27, 18)
#define MSG_XTRACT_TOKEN(hdr) FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
#define MSG_TOKEN_MAX (MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
/*
* Size of @pending_xfers hashtable included in @scmi_xfers_info; ideally, in
* order to minimize space and collisions, this should equal max_msg, i.e. the
* maximum number of in-flight messages on a specific platform, but such value
* is only available at runtime while kernel hashtables are statically sized:
* pick instead as a fixed static size the maximum number of entries that can
* fit the whole table into one 4k page.
*/
#define SCMI_PENDING_XFERS_HT_ORDER_SZ 9
/**
* pack_scmi_header() - packs and returns 32-bit header
*
* @hdr: pointer to header containing all the information on message id,
* protocol id, sequence id and type.
*
* Return: 32-bit packed message header to be sent to the platform.
*/
static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
{
return FIELD_PREP(MSG_ID_MASK, hdr->id) |
FIELD_PREP(MSG_TYPE_MASK, hdr->type) |
FIELD_PREP(MSG_TOKEN_ID_MASK, hdr->seq) |
FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
}
/**
* unpack_scmi_header() - unpacks and records message and protocol id
*
* @msg_hdr: 32-bit packed message header sent from the platform
* @hdr: pointer to header to fetch message and protocol id.
*/
static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
{
hdr->id = MSG_XTRACT_ID(msg_hdr);
hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
hdr->type = MSG_XTRACT_TYPE(msg_hdr);
}
/*
* An helper macro to lookup an xfer from the @pending_xfers hashtable
* using the message sequence number token as a key.
*/
#define XFER_FIND(__ht, __k) \
({ \
typeof(__k) k_ = __k; \
struct scmi_xfer *xfer_ = NULL; \
\
hash_for_each_possible((__ht), xfer_, node, k_) \
if (xfer_->hdr.seq == k_) \
break; \
xfer_; \
})
struct scmi_revision_info *
scmi_revision_area_get(const struct scmi_protocol_handle *ph);
void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph,
u8 *prot_imp);
extern const struct bus_type scmi_bus_type;
#define SCMI_BUS_NOTIFY_DEVICE_REQUEST 0
#define SCMI_BUS_NOTIFY_DEVICE_UNREQUEST 1
extern struct blocking_notifier_head scmi_requested_devices_nh;
struct scmi_device *scmi_device_create(struct device_node *np,
struct device *parent, int protocol,
const char *name);
void scmi_device_destroy(struct device *parent, int protocol, const char *name);
int scmi_protocol_acquire(const struct scmi_handle *handle, u8 protocol_id);
void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
/* SCMI Transport */
/**
* struct scmi_chan_info - Structure representing a SCMI channel information
*
* @id: An identifier for this channel: this matches the protocol number
* used to initialize this channel
* @dev: Reference to device in the SCMI hierarchy corresponding to this
* channel
* @rx_timeout_ms: The configured RX timeout in milliseconds.
* @handle: Pointer to SCMI entity handle
* @no_completion_irq: Flag to indicate that this channel has no completion
* interrupt mechanism for synchronous commands.
* This can be dynamically set by transports at run-time
* inside their provided .chan_setup().
* @transport_info: Transport layer related information
*/
struct scmi_chan_info {
int id;
struct device *dev;
unsigned int rx_timeout_ms;
struct scmi_handle *handle;
bool no_completion_irq;
void *transport_info;
};
/**
* struct scmi_transport_ops - Structure representing a SCMI transport ops
*
* @link_supplier: Optional callback to add link to a supplier device
* @chan_available: Callback to check if channel is available or not
* @chan_setup: Callback to allocate and setup a channel
* @chan_free: Callback to free a channel
* @get_max_msg: Optional callback to provide max_msg dynamically
* Returns the maximum number of messages for the channel type
* (tx or rx) that can be pending simultaneously in the system
* @send_message: Callback to send a message
* @mark_txdone: Callback to mark tx as done
* @fetch_response: Callback to fetch response
* @fetch_notification: Callback to fetch notification
* @clear_channel: Callback to clear a channel
* @poll_done: Callback to poll transfer status
*/
struct scmi_transport_ops {
int (*link_supplier)(struct device *dev);
bool (*chan_available)(struct device_node *of_node, int idx);
int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
bool tx);
int (*chan_free)(int id, void *p, void *data);
unsigned int (*get_max_msg)(struct scmi_chan_info *base_cinfo);
int (*send_message)(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer);
void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret,
struct scmi_xfer *xfer);
void (*fetch_response)(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer);
void (*fetch_notification)(struct scmi_chan_info *cinfo,
size_t max_len, struct scmi_xfer *xfer);
void (*clear_channel)(struct scmi_chan_info *cinfo);
bool (*poll_done)(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer);
};
/**
* struct scmi_desc - Description of SoC integration
*
* @transport_init: An optional function that a transport can provide to
* initialize some transport-specific setup during SCMI core
* initialization, so ahead of SCMI core probing.
* @transport_exit: An optional function that a transport can provide to
* de-initialize some transport-specific setup during SCMI core
* de-initialization, so after SCMI core removal.
* @ops: Pointer to the transport specific ops structure
* @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
* @max_msg: Maximum number of messages for a channel type (tx or rx) that can
* be pending simultaneously in the system. May be overridden by the
* get_max_msg op.
* @max_msg_size: Maximum size of data per message that can be handled.
* @force_polling: Flag to force this whole transport to use SCMI core polling
* mechanism instead of completion interrupts even if available.
* @sync_cmds_completed_on_ret: Flag to indicate that the transport assures
* synchronous-command messages are atomically
* completed on .send_message: no need to poll
* actively waiting for a response.
* Used by core internally only when polling is
* selected as a waiting for reply method: i.e.
* if a completion irq was found use that anyway.
* @atomic_enabled: Flag to indicate that this transport, which is assured not
* to sleep anywhere on the TX path, can be used in atomic mode
* when requested.
*/
struct scmi_desc {
int (*transport_init)(void);
void (*transport_exit)(void);
const struct scmi_transport_ops *ops;
int max_rx_timeout_ms;
int max_msg;
int max_msg_size;
const bool force_polling;
const bool sync_cmds_completed_on_ret;
const bool atomic_enabled;
};
static inline bool is_polling_required(struct scmi_chan_info *cinfo,
const struct scmi_desc *desc)
{
return cinfo->no_completion_irq || desc->force_polling;
}
static inline bool is_transport_polling_capable(const struct scmi_desc *desc)
{
return desc->ops->poll_done || desc->sync_cmds_completed_on_ret;
}
static inline bool is_polling_enabled(struct scmi_chan_info *cinfo,
const struct scmi_desc *desc)
{
return is_polling_required(cinfo, desc) &&
is_transport_polling_capable(desc);
}
void scmi_xfer_raw_put(const struct scmi_handle *handle,
struct scmi_xfer *xfer);
struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle);
struct scmi_chan_info *
scmi_xfer_raw_channel_get(const struct scmi_handle *handle, u8 protocol_id);
int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
struct scmi_xfer *xfer);
int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer,
unsigned int timeout_ms);
#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
extern const struct scmi_desc scmi_mailbox_desc;
#endif
#ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
extern const struct scmi_desc scmi_smc_desc;
#endif
#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
extern const struct scmi_desc scmi_virtio_desc;
#endif
#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE
extern const struct scmi_desc scmi_optee_desc;
#endif
void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
/* shmem related declarations */
struct scmi_shared_mem;
void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
struct scmi_xfer *xfer, struct scmi_chan_info *cinfo);
u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem);
void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
struct scmi_xfer *xfer);
void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
size_t max_len, struct scmi_xfer *xfer);
void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem);
bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
struct scmi_xfer *xfer);
bool shmem_channel_free(struct scmi_shared_mem __iomem *shmem);
/* declarations for message passing transports */
struct scmi_msg_payld;
/* Maximum overhead of message w.r.t. struct scmi_desc.max_msg_size */
#define SCMI_MSG_MAX_PROT_OVERHEAD (2 * sizeof(__le32))
size_t msg_response_size(struct scmi_xfer *xfer);
size_t msg_command_size(struct scmi_xfer *xfer);
void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer);
u32 msg_read_header(struct scmi_msg_payld *msg);
void msg_fetch_response(struct scmi_msg_payld *msg, size_t len,
struct scmi_xfer *xfer);
void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len,
size_t max_len, struct scmi_xfer *xfer);
void scmi_notification_instance_data_set(const struct scmi_handle *handle,
void *priv);
void *scmi_notification_instance_data_get(const struct scmi_handle *handle);
#endif /* _SCMI_COMMON_H */