blob: daabbece8c7e903fc93b6bd2eb7ff46b229d3bf8 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2020 MediaTek Inc.
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
#define DW9768_NAME "dw9768"
#define DW9768_MAX_FOCUS_POS (1024 - 1)
/*
* This sets the minimum granularity for the focus positions.
* A value of 1 gives maximum accuracy for a desired focus position
*/
#define DW9768_FOCUS_STEPS 1
/*
* Ring control and Power control register
* Bit[1] RING_EN
* 0: Direct mode
* 1: AAC mode (ringing control mode)
* Bit[0] PD
* 0: Normal operation mode
* 1: Power down mode
* DW9768 requires waiting time of Topr after PD reset takes place.
*/
#define DW9768_RING_PD_CONTROL_REG 0x02
#define DW9768_PD_MODE_OFF 0x00
#define DW9768_PD_MODE_EN BIT(0)
#define DW9768_AAC_MODE_EN BIT(1)
/*
* DW9768 separates two registers to control the VCM position.
* One for MSB value, another is LSB value.
* DAC_MSB: D[9:8] (ADD: 0x03)
* DAC_LSB: D[7:0] (ADD: 0x04)
* D[9:0] DAC data input: positive output current = D[9:0] / 1023 * 100[mA]
*/
#define DW9768_MSB_ADDR 0x03
#define DW9768_LSB_ADDR 0x04
#define DW9768_STATUS_ADDR 0x05
/*
* AAC mode control & prescale register
* Bit[7:5] Namely AC[2:0], decide the VCM mode and operation time.
* 001 AAC2 0.48 x Tvib
* 010 AAC3 0.70 x Tvib
* 011 AAC4 0.75 x Tvib
* 101 AAC8 1.13 x Tvib
* Bit[2:0] Namely PRESC[2:0], set the internal clock dividing rate as follow.
* 000 2
* 001 1
* 010 1/2
* 011 1/4
* 100 8
* 101 4
*/
#define DW9768_AAC_PRESC_REG 0x06
#define DW9768_AAC_MODE_SEL_MASK GENMASK(7, 5)
#define DW9768_CLOCK_PRE_SCALE_SEL_MASK GENMASK(2, 0)
/*
* VCM period of vibration register
* Bit[5:0] Defined as VCM rising periodic time (Tvib) together with PRESC[2:0]
* Tvib = (6.3ms + AACT[5:0] * 0.1ms) * Dividing Rate
* Dividing Rate is the internal clock dividing rate that is defined at
* PRESCALE register (ADD: 0x06)
*/
#define DW9768_AAC_TIME_REG 0x07
/*
* DW9768 requires waiting time (delay time) of t_OPR after power-up,
* or in the case of PD reset taking place.
*/
#define DW9768_T_OPR_US 1000
#define DW9768_TVIB_MS_BASE10 (64 - 1)
#define DW9768_AAC_MODE_DEFAULT 2
#define DW9768_AAC_TIME_DEFAULT 0x20
#define DW9768_CLOCK_PRE_SCALE_DEFAULT 1
/*
* This acts as the minimum granularity of lens movement.
* Keep this value power of 2, so the control steps can be
* uniformly adjusted for gradual lens movement, with desired
* number of control steps.
*/
#define DW9768_MOVE_STEPS 16
static const char * const dw9768_supply_names[] = {
"vin", /* Digital I/O power */
"vdd", /* Digital core power */
};
/* dw9768 device structure */
struct dw9768 {
struct regulator_bulk_data supplies[ARRAY_SIZE(dw9768_supply_names)];
struct v4l2_ctrl_handler ctrls;
struct v4l2_ctrl *focus;
struct v4l2_subdev sd;
u32 aac_mode;
u32 aac_timing;
u32 clock_presc;
u32 move_delay_us;
};
static inline struct dw9768 *sd_to_dw9768(struct v4l2_subdev *subdev)
{
return container_of(subdev, struct dw9768, sd);
}
struct regval_list {
u8 reg_num;
u8 value;
};
struct dw9768_aac_mode_ot_multi {
u32 aac_mode_enum;
u32 ot_multi_base100;
};
struct dw9768_clk_presc_dividing_rate {
u32 clk_presc_enum;
u32 dividing_rate_base100;
};
static const struct dw9768_aac_mode_ot_multi aac_mode_ot_multi[] = {
{1, 48},
{2, 70},
{3, 75},
{5, 113},
};
static const struct dw9768_clk_presc_dividing_rate presc_dividing_rate[] = {
{0, 200},
{1, 100},
{2, 50},
{3, 25},
{4, 800},
{5, 400},
};
static u32 dw9768_find_ot_multi(u32 aac_mode_param)
{
u32 cur_ot_multi_base100 = 70;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(aac_mode_ot_multi); i++) {
if (aac_mode_ot_multi[i].aac_mode_enum == aac_mode_param) {
cur_ot_multi_base100 =
aac_mode_ot_multi[i].ot_multi_base100;
}
}
return cur_ot_multi_base100;
}
static u32 dw9768_find_dividing_rate(u32 presc_param)
{
u32 cur_clk_dividing_rate_base100 = 100;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(presc_dividing_rate); i++) {
if (presc_dividing_rate[i].clk_presc_enum == presc_param) {
cur_clk_dividing_rate_base100 =
presc_dividing_rate[i].dividing_rate_base100;
}
}
return cur_clk_dividing_rate_base100;
}
/*
* DW9768_AAC_PRESC_REG & DW9768_AAC_TIME_REG determine VCM operation time.
* For current VCM mode: AAC3, Operation Time would be 0.70 x Tvib.
* Tvib = (6.3ms + AACT[5:0] * 0.1MS) * Dividing Rate.
* Below is calculation of the operation delay for each step.
*/
static inline u32 dw9768_cal_move_delay(u32 aac_mode_param, u32 presc_param,
u32 aac_timing_param)
{
u32 Tvib_us;
u32 ot_multi_base100;
u32 clk_dividing_rate_base100;
ot_multi_base100 = dw9768_find_ot_multi(aac_mode_param);
clk_dividing_rate_base100 = dw9768_find_dividing_rate(presc_param);
Tvib_us = (DW9768_TVIB_MS_BASE10 + aac_timing_param) *
clk_dividing_rate_base100;
return Tvib_us * ot_multi_base100 / 100;
}
static int dw9768_mod_reg(struct dw9768 *dw9768, u8 reg, u8 mask, u8 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd);
int ret;
ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0)
return ret;
val = ((unsigned char)ret & ~mask) | (val & mask);
return i2c_smbus_write_byte_data(client, reg, val);
}
static int dw9768_set_dac(struct dw9768 *dw9768, u16 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd);
/* Write VCM position to registers */
return i2c_smbus_write_word_swapped(client, DW9768_MSB_ADDR, val);
}
static int dw9768_init(struct dw9768 *dw9768)
{
struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd);
int ret, val;
/* Reset DW9768_RING_PD_CONTROL_REG to default status 0x00 */
ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG,
DW9768_PD_MODE_OFF);
if (ret < 0)
return ret;
/*
* DW9769 requires waiting delay time of t_OPR
* after PD reset takes place.
*/
usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100);
/* Set DW9768_RING_PD_CONTROL_REG to DW9768_AAC_MODE_EN(0x01) */
ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG,
DW9768_AAC_MODE_EN);
if (ret < 0)
return ret;
/* Set AAC mode */
ret = dw9768_mod_reg(dw9768, DW9768_AAC_PRESC_REG,
DW9768_AAC_MODE_SEL_MASK,
dw9768->aac_mode << 5);
if (ret < 0)
return ret;
/* Set clock presc */
if (dw9768->clock_presc != DW9768_CLOCK_PRE_SCALE_DEFAULT) {
ret = dw9768_mod_reg(dw9768, DW9768_AAC_PRESC_REG,
DW9768_CLOCK_PRE_SCALE_SEL_MASK,
dw9768->clock_presc);
if (ret < 0)
return ret;
}
/* Set AAC Timing */
if (dw9768->aac_timing != DW9768_AAC_TIME_DEFAULT) {
ret = i2c_smbus_write_byte_data(client, DW9768_AAC_TIME_REG,
dw9768->aac_timing);
if (ret < 0)
return ret;
}
for (val = dw9768->focus->val % DW9768_MOVE_STEPS;
val <= dw9768->focus->val;
val += DW9768_MOVE_STEPS) {
ret = dw9768_set_dac(dw9768, val);
if (ret) {
dev_err(&client->dev, "I2C failure: %d", ret);
return ret;
}
usleep_range(dw9768->move_delay_us,
dw9768->move_delay_us + 1000);
}
return 0;
}
static int dw9768_release(struct dw9768 *dw9768)
{
struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd);
int ret, val;
val = round_down(dw9768->focus->val, DW9768_MOVE_STEPS);
for ( ; val >= 0; val -= DW9768_MOVE_STEPS) {
ret = dw9768_set_dac(dw9768, val);
if (ret) {
dev_err(&client->dev, "I2C write fail: %d", ret);
return ret;
}
usleep_range(dw9768->move_delay_us,
dw9768->move_delay_us + 1000);
}
ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG,
DW9768_PD_MODE_EN);
if (ret < 0)
return ret;
/*
* DW9769 requires waiting delay time of t_OPR
* after PD reset takes place.
*/
usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100);
return 0;
}
static int dw9768_runtime_suspend(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct dw9768 *dw9768 = sd_to_dw9768(sd);
dw9768_release(dw9768);
regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names),
dw9768->supplies);
return 0;
}
static int dw9768_runtime_resume(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct dw9768 *dw9768 = sd_to_dw9768(sd);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(dw9768_supply_names),
dw9768->supplies);
if (ret < 0) {
dev_err(dev, "failed to enable regulators\n");
return ret;
}
/*
* The datasheet refers to t_OPR that needs to be waited before sending
* I2C commands after power-up.
*/
usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100);
ret = dw9768_init(dw9768);
if (ret < 0)
goto disable_regulator;
return 0;
disable_regulator:
regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names),
dw9768->supplies);
return ret;
}
static int dw9768_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct dw9768 *dw9768 = container_of(ctrl->handler,
struct dw9768, ctrls);
if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE)
return dw9768_set_dac(dw9768, ctrl->val);
return 0;
}
static const struct v4l2_ctrl_ops dw9768_ctrl_ops = {
.s_ctrl = dw9768_set_ctrl,
};
static int dw9768_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
return pm_runtime_resume_and_get(sd->dev);
}
static int dw9768_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
pm_runtime_put(sd->dev);
return 0;
}
static const struct v4l2_subdev_internal_ops dw9768_int_ops = {
.open = dw9768_open,
.close = dw9768_close,
};
static const struct v4l2_subdev_ops dw9768_ops = { };
static int dw9768_init_controls(struct dw9768 *dw9768)
{
struct v4l2_ctrl_handler *hdl = &dw9768->ctrls;
const struct v4l2_ctrl_ops *ops = &dw9768_ctrl_ops;
v4l2_ctrl_handler_init(hdl, 1);
dw9768->focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE, 0,
DW9768_MAX_FOCUS_POS,
DW9768_FOCUS_STEPS, 0);
if (hdl->error)
return hdl->error;
dw9768->sd.ctrl_handler = hdl;
return 0;
}
static int dw9768_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct dw9768 *dw9768;
bool full_power;
unsigned int i;
int ret;
dw9768 = devm_kzalloc(dev, sizeof(*dw9768), GFP_KERNEL);
if (!dw9768)
return -ENOMEM;
/* Initialize subdev */
v4l2_i2c_subdev_init(&dw9768->sd, client, &dw9768_ops);
dw9768->aac_mode = DW9768_AAC_MODE_DEFAULT;
dw9768->aac_timing = DW9768_AAC_TIME_DEFAULT;
dw9768->clock_presc = DW9768_CLOCK_PRE_SCALE_DEFAULT;
/* Optional indication of AAC mode select */
fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,aac-mode",
&dw9768->aac_mode);
/* Optional indication of clock pre-scale select */
fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,clock-presc",
&dw9768->clock_presc);
/* Optional indication of AAC Timing */
fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,aac-timing",
&dw9768->aac_timing);
dw9768->move_delay_us = dw9768_cal_move_delay(dw9768->aac_mode,
dw9768->clock_presc,
dw9768->aac_timing);
for (i = 0; i < ARRAY_SIZE(dw9768_supply_names); i++)
dw9768->supplies[i].supply = dw9768_supply_names[i];
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dw9768_supply_names),
dw9768->supplies);
if (ret) {
dev_err(dev, "failed to get regulators\n");
return ret;
}
/* Initialize controls */
ret = dw9768_init_controls(dw9768);
if (ret)
goto err_free_handler;
/* Initialize subdev */
dw9768->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
dw9768->sd.internal_ops = &dw9768_int_ops;
ret = media_entity_pads_init(&dw9768->sd.entity, 0, NULL);
if (ret < 0)
goto err_free_handler;
dw9768->sd.entity.function = MEDIA_ENT_F_LENS;
/*
* Figure out whether we're going to power up the device here. Generally
* this is done if CONFIG_PM is disabled in a DT system or the device is
* to be powered on in an ACPI system. Similarly for power off in
* remove.
*/
pm_runtime_enable(dev);
full_power = (is_acpi_node(dev_fwnode(dev)) &&
acpi_dev_state_d0(dev)) ||
(is_of_node(dev_fwnode(dev)) && !pm_runtime_enabled(dev));
if (full_power) {
ret = dw9768_runtime_resume(dev);
if (ret < 0) {
dev_err(dev, "failed to power on: %d\n", ret);
goto err_clean_entity;
}
pm_runtime_set_active(dev);
}
ret = v4l2_async_register_subdev(&dw9768->sd);
if (ret < 0) {
dev_err(dev, "failed to register V4L2 subdev: %d", ret);
goto err_power_off;
}
pm_runtime_idle(dev);
return 0;
err_power_off:
if (full_power) {
dw9768_runtime_suspend(dev);
pm_runtime_set_suspended(dev);
}
err_clean_entity:
pm_runtime_disable(dev);
media_entity_cleanup(&dw9768->sd.entity);
err_free_handler:
v4l2_ctrl_handler_free(&dw9768->ctrls);
return ret;
}
static void dw9768_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct dw9768 *dw9768 = sd_to_dw9768(sd);
struct device *dev = &client->dev;
v4l2_async_unregister_subdev(&dw9768->sd);
v4l2_ctrl_handler_free(&dw9768->ctrls);
media_entity_cleanup(&dw9768->sd.entity);
if ((is_acpi_node(dev_fwnode(dev)) && acpi_dev_state_d0(dev)) ||
(is_of_node(dev_fwnode(dev)) && !pm_runtime_enabled(dev))) {
dw9768_runtime_suspend(dev);
pm_runtime_set_suspended(dev);
}
pm_runtime_disable(dev);
}
static const struct of_device_id dw9768_of_table[] = {
{ .compatible = "dongwoon,dw9768" },
{ .compatible = "giantec,gt9769" },
{}
};
MODULE_DEVICE_TABLE(of, dw9768_of_table);
static const struct dev_pm_ops dw9768_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(dw9768_runtime_suspend, dw9768_runtime_resume, NULL)
};
static struct i2c_driver dw9768_i2c_driver = {
.driver = {
.name = DW9768_NAME,
.pm = &dw9768_pm_ops,
.of_match_table = dw9768_of_table,
},
.probe = dw9768_probe,
.remove = dw9768_remove,
};
module_i2c_driver(dw9768_i2c_driver);
MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>");
MODULE_DESCRIPTION("DW9768 VCM driver");
MODULE_LICENSE("GPL v2");