| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Support for a cx23417 mpeg encoder via cx231xx host port. |
| * |
| * (c) 2004 Jelle Foks <jelle@foks.us> |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> |
| * (c) 2008 Steven Toth <stoth@linuxtv.org> |
| * - CX23885/7/8 support |
| * |
| * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), |
| */ |
| |
| #include "cx231xx.h" |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-event.h> |
| #include <media/drv-intf/cx2341x.h> |
| #include <media/tuner.h> |
| |
| #define CX231xx_FIRM_IMAGE_SIZE 376836 |
| #define CX231xx_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" |
| |
| /* for polaris ITVC */ |
| #define ITVC_WRITE_DIR 0x03FDFC00 |
| #define ITVC_READ_DIR 0x0001FC00 |
| |
| #define MCI_MEMORY_DATA_BYTE0 0x00 |
| #define MCI_MEMORY_DATA_BYTE1 0x08 |
| #define MCI_MEMORY_DATA_BYTE2 0x10 |
| #define MCI_MEMORY_DATA_BYTE3 0x18 |
| |
| #define MCI_MEMORY_ADDRESS_BYTE2 0x20 |
| #define MCI_MEMORY_ADDRESS_BYTE1 0x28 |
| #define MCI_MEMORY_ADDRESS_BYTE0 0x30 |
| |
| #define MCI_REGISTER_DATA_BYTE0 0x40 |
| #define MCI_REGISTER_DATA_BYTE1 0x48 |
| #define MCI_REGISTER_DATA_BYTE2 0x50 |
| #define MCI_REGISTER_DATA_BYTE3 0x58 |
| |
| #define MCI_REGISTER_ADDRESS_BYTE0 0x60 |
| #define MCI_REGISTER_ADDRESS_BYTE1 0x68 |
| |
| #define MCI_REGISTER_MODE 0x70 |
| |
| /* Read and write modes for polaris ITVC */ |
| #define MCI_MODE_REGISTER_READ 0x000 |
| #define MCI_MODE_REGISTER_WRITE 0x100 |
| #define MCI_MODE_MEMORY_READ 0x000 |
| #define MCI_MODE_MEMORY_WRITE 0x4000 |
| |
| static unsigned int mpeglines = 128; |
| module_param(mpeglines, int, 0644); |
| MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32"); |
| |
| static unsigned int mpeglinesize = 512; |
| module_param(mpeglinesize, int, 0644); |
| MODULE_PARM_DESC(mpeglinesize, |
| "number of bytes in each line of an MPEG buffer, range 512-1024"); |
| |
| static unsigned int v4l_debug = 1; |
| module_param(v4l_debug, int, 0644); |
| MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); |
| |
| #define dprintk(level, fmt, arg...) \ |
| do { \ |
| if (v4l_debug >= level) \ |
| printk(KERN_DEBUG pr_fmt(fmt), ## arg); \ |
| } while (0) |
| |
| static struct cx231xx_tvnorm cx231xx_tvnorms[] = { |
| { |
| .name = "NTSC-M", |
| .id = V4L2_STD_NTSC_M, |
| }, { |
| .name = "NTSC-JP", |
| .id = V4L2_STD_NTSC_M_JP, |
| }, { |
| .name = "PAL-BG", |
| .id = V4L2_STD_PAL_BG, |
| }, { |
| .name = "PAL-DK", |
| .id = V4L2_STD_PAL_DK, |
| }, { |
| .name = "PAL-I", |
| .id = V4L2_STD_PAL_I, |
| }, { |
| .name = "PAL-M", |
| .id = V4L2_STD_PAL_M, |
| }, { |
| .name = "PAL-N", |
| .id = V4L2_STD_PAL_N, |
| }, { |
| .name = "PAL-Nc", |
| .id = V4L2_STD_PAL_Nc, |
| }, { |
| .name = "PAL-60", |
| .id = V4L2_STD_PAL_60, |
| }, { |
| .name = "SECAM-L", |
| .id = V4L2_STD_SECAM_L, |
| }, { |
| .name = "SECAM-DK", |
| .id = V4L2_STD_SECAM_DK, |
| } |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| enum cx231xx_capture_type { |
| CX231xx_MPEG_CAPTURE, |
| CX231xx_RAW_CAPTURE, |
| CX231xx_RAW_PASSTHRU_CAPTURE |
| }; |
| |
| enum cx231xx_capture_bits { |
| CX231xx_RAW_BITS_NONE = 0x00, |
| CX231xx_RAW_BITS_YUV_CAPTURE = 0x01, |
| CX231xx_RAW_BITS_PCM_CAPTURE = 0x02, |
| CX231xx_RAW_BITS_VBI_CAPTURE = 0x04, |
| CX231xx_RAW_BITS_PASSTHRU_CAPTURE = 0x08, |
| CX231xx_RAW_BITS_TO_HOST_CAPTURE = 0x10 |
| }; |
| |
| enum cx231xx_capture_end { |
| CX231xx_END_AT_GOP, /* stop at the end of gop, generate irq */ |
| CX231xx_END_NOW, /* stop immediately, no irq */ |
| }; |
| |
| enum cx231xx_framerate { |
| CX231xx_FRAMERATE_NTSC_30, /* NTSC: 30fps */ |
| CX231xx_FRAMERATE_PAL_25 /* PAL: 25fps */ |
| }; |
| |
| enum cx231xx_stream_port { |
| CX231xx_OUTPUT_PORT_MEMORY, |
| CX231xx_OUTPUT_PORT_STREAMING, |
| CX231xx_OUTPUT_PORT_SERIAL |
| }; |
| |
| enum cx231xx_data_xfer_status { |
| CX231xx_MORE_BUFFERS_FOLLOW, |
| CX231xx_LAST_BUFFER, |
| }; |
| |
| enum cx231xx_picture_mask { |
| CX231xx_PICTURE_MASK_NONE, |
| CX231xx_PICTURE_MASK_I_FRAMES, |
| CX231xx_PICTURE_MASK_I_P_FRAMES = 0x3, |
| CX231xx_PICTURE_MASK_ALL_FRAMES = 0x7, |
| }; |
| |
| enum cx231xx_vbi_mode_bits { |
| CX231xx_VBI_BITS_SLICED, |
| CX231xx_VBI_BITS_RAW, |
| }; |
| |
| enum cx231xx_vbi_insertion_bits { |
| CX231xx_VBI_BITS_INSERT_IN_XTENSION_USR_DATA, |
| CX231xx_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1, |
| CX231xx_VBI_BITS_SEPARATE_STREAM = 0x2 << 1, |
| CX231xx_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1, |
| CX231xx_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1, |
| }; |
| |
| enum cx231xx_dma_unit { |
| CX231xx_DMA_BYTES, |
| CX231xx_DMA_FRAMES, |
| }; |
| |
| enum cx231xx_dma_transfer_status_bits { |
| CX231xx_DMA_TRANSFER_BITS_DONE = 0x01, |
| CX231xx_DMA_TRANSFER_BITS_ERROR = 0x04, |
| CX231xx_DMA_TRANSFER_BITS_LL_ERROR = 0x10, |
| }; |
| |
| enum cx231xx_pause { |
| CX231xx_PAUSE_ENCODING, |
| CX231xx_RESUME_ENCODING, |
| }; |
| |
| enum cx231xx_copyright { |
| CX231xx_COPYRIGHT_OFF, |
| CX231xx_COPYRIGHT_ON, |
| }; |
| |
| enum cx231xx_notification_type { |
| CX231xx_NOTIFICATION_REFRESH, |
| }; |
| |
| enum cx231xx_notification_status { |
| CX231xx_NOTIFICATION_OFF, |
| CX231xx_NOTIFICATION_ON, |
| }; |
| |
| enum cx231xx_notification_mailbox { |
| CX231xx_NOTIFICATION_NO_MAILBOX = -1, |
| }; |
| |
| enum cx231xx_field1_lines { |
| CX231xx_FIELD1_SAA7114 = 0x00EF, /* 239 */ |
| CX231xx_FIELD1_SAA7115 = 0x00F0, /* 240 */ |
| CX231xx_FIELD1_MICRONAS = 0x0105, /* 261 */ |
| }; |
| |
| enum cx231xx_field2_lines { |
| CX231xx_FIELD2_SAA7114 = 0x00EF, /* 239 */ |
| CX231xx_FIELD2_SAA7115 = 0x00F0, /* 240 */ |
| CX231xx_FIELD2_MICRONAS = 0x0106, /* 262 */ |
| }; |
| |
| enum cx231xx_custom_data_type { |
| CX231xx_CUSTOM_EXTENSION_USR_DATA, |
| CX231xx_CUSTOM_PRIVATE_PACKET, |
| }; |
| |
| enum cx231xx_mute { |
| CX231xx_UNMUTE, |
| CX231xx_MUTE, |
| }; |
| |
| enum cx231xx_mute_video_mask { |
| CX231xx_MUTE_VIDEO_V_MASK = 0x0000FF00, |
| CX231xx_MUTE_VIDEO_U_MASK = 0x00FF0000, |
| CX231xx_MUTE_VIDEO_Y_MASK = 0xFF000000, |
| }; |
| |
| enum cx231xx_mute_video_shift { |
| CX231xx_MUTE_VIDEO_V_SHIFT = 8, |
| CX231xx_MUTE_VIDEO_U_SHIFT = 16, |
| CX231xx_MUTE_VIDEO_Y_SHIFT = 24, |
| }; |
| |
| /* defines below are from ivtv-driver.h */ |
| #define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF |
| |
| /* Firmware API commands */ |
| #define IVTV_API_STD_TIMEOUT 500 |
| |
| /* Registers */ |
| /* IVTV_REG_OFFSET */ |
| #define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8) |
| #define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC) |
| #define IVTV_REG_SPU (0x9050) |
| #define IVTV_REG_HW_BLOCKS (0x9054) |
| #define IVTV_REG_VPU (0x9058) |
| #define IVTV_REG_APU (0xA064) |
| |
| /* |
| * Bit definitions for MC417_RWD and MC417_OEN registers |
| * |
| * bits 31-16 |
| *+-----------+ |
| *| Reserved | |
| *|+-----------+ |
| *| bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 |
| *|+-------+-------+-------+-------+-------+-------+-------+-------+ |
| *|| MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0| |
| *|+-------+-------+-------+-------+-------+-------+-------+-------+ |
| *| bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 |
| *|+-------+-------+-------+-------+-------+-------+-------+-------+ |
| *||MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0| |
| *|+-------+-------+-------+-------+-------+-------+-------+-------+ |
| */ |
| #define MC417_MIWR 0x8000 |
| #define MC417_MIRD 0x4000 |
| #define MC417_MICS 0x2000 |
| #define MC417_MIRDY 0x1000 |
| #define MC417_MIADDR 0x0F00 |
| #define MC417_MIDATA 0x00FF |
| |
| |
| /* Bit definitions for MC417_CTL register **** |
| *bits 31-6 bits 5-4 bit 3 bits 2-1 Bit 0 |
| *+--------+-------------+--------+--------------+------------+ |
| *|Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN| |
| *+--------+-------------+--------+--------------+------------+ |
| */ |
| #define MC417_SPD_CTL(x) (((x) << 4) & 0x00000030) |
| #define MC417_GPIO_SEL(x) (((x) << 1) & 0x00000006) |
| #define MC417_UART_GPIO_EN 0x00000001 |
| |
| /* Values for speed control */ |
| #define MC417_SPD_CTL_SLOW 0x1 |
| #define MC417_SPD_CTL_MEDIUM 0x0 |
| #define MC417_SPD_CTL_FAST 0x3 /* b'1x, but we use b'11 */ |
| |
| /* Values for GPIO select */ |
| #define MC417_GPIO_SEL_GPIO3 0x3 |
| #define MC417_GPIO_SEL_GPIO2 0x2 |
| #define MC417_GPIO_SEL_GPIO1 0x1 |
| #define MC417_GPIO_SEL_GPIO0 0x0 |
| |
| |
| #define CX23417_GPIO_MASK 0xFC0003FF |
| |
| static int set_itvc_reg(struct cx231xx *dev, u32 gpio_direction, u32 value) |
| { |
| int status = 0; |
| u32 _gpio_direction = 0; |
| |
| _gpio_direction = _gpio_direction & CX23417_GPIO_MASK; |
| _gpio_direction = _gpio_direction | gpio_direction; |
| status = cx231xx_send_gpio_cmd(dev, _gpio_direction, |
| (u8 *)&value, 4, 0, 0); |
| return status; |
| } |
| |
| static int get_itvc_reg(struct cx231xx *dev, u32 gpio_direction, u32 *val_ptr) |
| { |
| int status = 0; |
| u32 _gpio_direction = 0; |
| |
| _gpio_direction = _gpio_direction & CX23417_GPIO_MASK; |
| _gpio_direction = _gpio_direction | gpio_direction; |
| |
| status = cx231xx_send_gpio_cmd(dev, _gpio_direction, |
| (u8 *)val_ptr, 4, 0, 1); |
| return status; |
| } |
| |
| static int wait_for_mci_complete(struct cx231xx *dev) |
| { |
| u32 gpio; |
| u32 gpio_direction = 0; |
| u8 count = 0; |
| get_itvc_reg(dev, gpio_direction, &gpio); |
| |
| while (!(gpio&0x020000)) { |
| msleep(10); |
| |
| get_itvc_reg(dev, gpio_direction, &gpio); |
| |
| if (count++ > 100) { |
| dprintk(3, "ERROR: Timeout - gpio=%x\n", gpio); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| static int mc417_register_write(struct cx231xx *dev, u16 address, u32 value) |
| { |
| u32 temp; |
| int status = 0; |
| |
| temp = 0x82 | MCI_REGISTER_DATA_BYTE0 | ((value & 0x000000FF) << 8); |
| temp = temp << 10; |
| status = set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| if (status < 0) |
| return status; |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write data byte 1;*/ |
| temp = 0x82 | MCI_REGISTER_DATA_BYTE1 | (value & 0x0000FF00); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write data byte 2;*/ |
| temp = 0x82 | MCI_REGISTER_DATA_BYTE2 | ((value & 0x00FF0000) >> 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write data byte 3;*/ |
| temp = 0x82 | MCI_REGISTER_DATA_BYTE3 | ((value & 0xFF000000) >> 16); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write address byte 0;*/ |
| temp = 0x82 | MCI_REGISTER_ADDRESS_BYTE0 | ((address & 0x000000FF) << 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write address byte 1;*/ |
| temp = 0x82 | MCI_REGISTER_ADDRESS_BYTE1 | (address & 0x0000FF00); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*Write that the mode is write.*/ |
| temp = 0x82 | MCI_REGISTER_MODE | MCI_MODE_REGISTER_WRITE; |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| return wait_for_mci_complete(dev); |
| } |
| |
| static int mc417_register_read(struct cx231xx *dev, u16 address, u32 *value) |
| { |
| /*write address byte 0;*/ |
| u32 temp; |
| u32 return_value = 0; |
| int ret = 0; |
| |
| temp = 0x82 | MCI_REGISTER_ADDRESS_BYTE0 | ((address & 0x00FF) << 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | ((0x05) << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write address byte 1;*/ |
| temp = 0x82 | MCI_REGISTER_ADDRESS_BYTE1 | (address & 0xFF00); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | ((0x05) << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write that the mode is read;*/ |
| temp = 0x82 | MCI_REGISTER_MODE | MCI_MODE_REGISTER_READ; |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | ((0x05) << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*wait for the MIRDY line to be asserted , |
| signalling that the read is done;*/ |
| ret = wait_for_mci_complete(dev); |
| |
| /*switch the DATA- GPIO to input mode;*/ |
| |
| /*Read data byte 0;*/ |
| temp = (0x82 | MCI_REGISTER_DATA_BYTE0) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_REGISTER_DATA_BYTE0) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) >> 18); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| /* Read data byte 1;*/ |
| temp = (0x82 | MCI_REGISTER_DATA_BYTE1) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_REGISTER_DATA_BYTE1) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| |
| return_value |= ((temp & 0x03FC0000) >> 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| /*Read data byte 2;*/ |
| temp = (0x82 | MCI_REGISTER_DATA_BYTE2) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_REGISTER_DATA_BYTE2) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) >> 2); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| /*Read data byte 3;*/ |
| temp = (0x82 | MCI_REGISTER_DATA_BYTE3) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_REGISTER_DATA_BYTE3) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) << 6); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| *value = return_value; |
| return ret; |
| } |
| |
| static int mc417_memory_write(struct cx231xx *dev, u32 address, u32 value) |
| { |
| /*write data byte 0;*/ |
| |
| u32 temp; |
| int ret = 0; |
| |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE0 | ((value & 0x000000FF) << 8); |
| temp = temp << 10; |
| ret = set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| if (ret < 0) |
| return ret; |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write data byte 1;*/ |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE1 | (value & 0x0000FF00); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write data byte 2;*/ |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE2 | ((value & 0x00FF0000) >> 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write data byte 3;*/ |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE3 | ((value & 0xFF000000) >> 16); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /* write address byte 2;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE2 | MCI_MODE_MEMORY_WRITE | |
| ((address & 0x003F0000) >> 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /* write address byte 1;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE1 | (address & 0xFF00); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /* write address byte 0;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE0 | ((address & 0x00FF) << 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*wait for MIRDY line;*/ |
| wait_for_mci_complete(dev); |
| |
| return 0; |
| } |
| |
| static int mc417_memory_read(struct cx231xx *dev, u32 address, u32 *value) |
| { |
| u32 temp = 0; |
| u32 return_value = 0; |
| int ret = 0; |
| |
| /*write address byte 2;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE2 | MCI_MODE_MEMORY_READ | |
| ((address & 0x003F0000) >> 8); |
| temp = temp << 10; |
| ret = set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| if (ret < 0) |
| return ret; |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write address byte 1*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE1 | (address & 0xFF00); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*write address byte 0*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE0 | ((address & 0x00FF) << 8); |
| temp = temp << 10; |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| temp = temp | (0x05 << 10); |
| set_itvc_reg(dev, ITVC_WRITE_DIR, temp); |
| |
| /*Wait for MIRDY line*/ |
| ret = wait_for_mci_complete(dev); |
| |
| |
| /*Read data byte 3;*/ |
| temp = (0x82 | MCI_MEMORY_DATA_BYTE3) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_MEMORY_DATA_BYTE3) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) << 6); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| /*Read data byte 2;*/ |
| temp = (0x82 | MCI_MEMORY_DATA_BYTE2) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_MEMORY_DATA_BYTE2) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) >> 2); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| /* Read data byte 1;*/ |
| temp = (0x82 | MCI_MEMORY_DATA_BYTE1) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_MEMORY_DATA_BYTE1) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) >> 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| /*Read data byte 0;*/ |
| temp = (0x82 | MCI_MEMORY_DATA_BYTE0) << 10; |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| temp = ((0x81 | MCI_MEMORY_DATA_BYTE0) << 10); |
| set_itvc_reg(dev, ITVC_READ_DIR, temp); |
| get_itvc_reg(dev, ITVC_READ_DIR, &temp); |
| return_value |= ((temp & 0x03FC0000) >> 18); |
| set_itvc_reg(dev, ITVC_READ_DIR, (0x87 << 10)); |
| |
| *value = return_value; |
| return ret; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| /* MPEG encoder API */ |
| static char *cmd_to_str(int cmd) |
| { |
| switch (cmd) { |
| case CX2341X_ENC_PING_FW: |
| return "PING_FW"; |
| case CX2341X_ENC_START_CAPTURE: |
| return "START_CAPTURE"; |
| case CX2341X_ENC_STOP_CAPTURE: |
| return "STOP_CAPTURE"; |
| case CX2341X_ENC_SET_AUDIO_ID: |
| return "SET_AUDIO_ID"; |
| case CX2341X_ENC_SET_VIDEO_ID: |
| return "SET_VIDEO_ID"; |
| case CX2341X_ENC_SET_PCR_ID: |
| return "SET_PCR_PID"; |
| case CX2341X_ENC_SET_FRAME_RATE: |
| return "SET_FRAME_RATE"; |
| case CX2341X_ENC_SET_FRAME_SIZE: |
| return "SET_FRAME_SIZE"; |
| case CX2341X_ENC_SET_BIT_RATE: |
| return "SET_BIT_RATE"; |
| case CX2341X_ENC_SET_GOP_PROPERTIES: |
| return "SET_GOP_PROPERTIES"; |
| case CX2341X_ENC_SET_ASPECT_RATIO: |
| return "SET_ASPECT_RATIO"; |
| case CX2341X_ENC_SET_DNR_FILTER_MODE: |
| return "SET_DNR_FILTER_PROPS"; |
| case CX2341X_ENC_SET_DNR_FILTER_PROPS: |
| return "SET_DNR_FILTER_PROPS"; |
| case CX2341X_ENC_SET_CORING_LEVELS: |
| return "SET_CORING_LEVELS"; |
| case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: |
| return "SET_SPATIAL_FILTER_TYPE"; |
| case CX2341X_ENC_SET_VBI_LINE: |
| return "SET_VBI_LINE"; |
| case CX2341X_ENC_SET_STREAM_TYPE: |
| return "SET_STREAM_TYPE"; |
| case CX2341X_ENC_SET_OUTPUT_PORT: |
| return "SET_OUTPUT_PORT"; |
| case CX2341X_ENC_SET_AUDIO_PROPERTIES: |
| return "SET_AUDIO_PROPERTIES"; |
| case CX2341X_ENC_HALT_FW: |
| return "HALT_FW"; |
| case CX2341X_ENC_GET_VERSION: |
| return "GET_VERSION"; |
| case CX2341X_ENC_SET_GOP_CLOSURE: |
| return "SET_GOP_CLOSURE"; |
| case CX2341X_ENC_GET_SEQ_END: |
| return "GET_SEQ_END"; |
| case CX2341X_ENC_SET_PGM_INDEX_INFO: |
| return "SET_PGM_INDEX_INFO"; |
| case CX2341X_ENC_SET_VBI_CONFIG: |
| return "SET_VBI_CONFIG"; |
| case CX2341X_ENC_SET_DMA_BLOCK_SIZE: |
| return "SET_DMA_BLOCK_SIZE"; |
| case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10: |
| return "GET_PREV_DMA_INFO_MB_10"; |
| case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9: |
| return "GET_PREV_DMA_INFO_MB_9"; |
| case CX2341X_ENC_SCHED_DMA_TO_HOST: |
| return "SCHED_DMA_TO_HOST"; |
| case CX2341X_ENC_INITIALIZE_INPUT: |
| return "INITIALIZE_INPUT"; |
| case CX2341X_ENC_SET_FRAME_DROP_RATE: |
| return "SET_FRAME_DROP_RATE"; |
| case CX2341X_ENC_PAUSE_ENCODER: |
| return "PAUSE_ENCODER"; |
| case CX2341X_ENC_REFRESH_INPUT: |
| return "REFRESH_INPUT"; |
| case CX2341X_ENC_SET_COPYRIGHT: |
| return "SET_COPYRIGHT"; |
| case CX2341X_ENC_SET_EVENT_NOTIFICATION: |
| return "SET_EVENT_NOTIFICATION"; |
| case CX2341X_ENC_SET_NUM_VSYNC_LINES: |
| return "SET_NUM_VSYNC_LINES"; |
| case CX2341X_ENC_SET_PLACEHOLDER: |
| return "SET_PLACEHOLDER"; |
| case CX2341X_ENC_MUTE_VIDEO: |
| return "MUTE_VIDEO"; |
| case CX2341X_ENC_MUTE_AUDIO: |
| return "MUTE_AUDIO"; |
| case CX2341X_ENC_MISC: |
| return "MISC"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static int cx231xx_mbox_func(void *priv, u32 command, int in, int out, |
| u32 data[CX2341X_MBOX_MAX_DATA]) |
| { |
| struct cx231xx *dev = priv; |
| unsigned long timeout; |
| u32 value, flag, retval = 0; |
| int i; |
| |
| dprintk(3, "%s: command(0x%X) = %s\n", __func__, command, |
| cmd_to_str(command)); |
| |
| /* this may not be 100% safe if we can't read any memory location |
| without side effects */ |
| mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value); |
| if (value != 0x12345678) { |
| dprintk(3, "Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n", |
| value, cmd_to_str(command)); |
| return -EIO; |
| } |
| |
| /* This read looks at 32 bits, but flag is only 8 bits. |
| * Seems we also bail if CMD or TIMEOUT bytes are set??? |
| */ |
| mc417_memory_read(dev, dev->cx23417_mailbox, &flag); |
| if (flag) { |
| dprintk(3, "ERROR: Mailbox appears to be in use (%x), cmd = %s\n", |
| flag, cmd_to_str(command)); |
| return -EBUSY; |
| } |
| |
| flag |= 1; /* tell 'em we're working on it */ |
| mc417_memory_write(dev, dev->cx23417_mailbox, flag); |
| |
| /* write command + args + fill remaining with zeros */ |
| /* command code */ |
| mc417_memory_write(dev, dev->cx23417_mailbox + 1, command); |
| mc417_memory_write(dev, dev->cx23417_mailbox + 3, |
| IVTV_API_STD_TIMEOUT); /* timeout */ |
| for (i = 0; i < in; i++) { |
| mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]); |
| dprintk(3, "API Input %d = %d\n", i, data[i]); |
| } |
| for (; i < CX2341X_MBOX_MAX_DATA; i++) |
| mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0); |
| |
| flag |= 3; /* tell 'em we're done writing */ |
| mc417_memory_write(dev, dev->cx23417_mailbox, flag); |
| |
| /* wait for firmware to handle the API command */ |
| timeout = jiffies + msecs_to_jiffies(10); |
| for (;;) { |
| mc417_memory_read(dev, dev->cx23417_mailbox, &flag); |
| if (0 != (flag & 4)) |
| break; |
| if (time_after(jiffies, timeout)) { |
| dprintk(3, "ERROR: API Mailbox timeout\n"); |
| return -EIO; |
| } |
| udelay(10); |
| } |
| |
| /* read output values */ |
| for (i = 0; i < out; i++) { |
| mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i); |
| dprintk(3, "API Output %d = %d\n", i, data[i]); |
| } |
| |
| mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval); |
| dprintk(3, "API result = %d\n", retval); |
| |
| flag = 0; |
| mc417_memory_write(dev, dev->cx23417_mailbox, flag); |
| |
| return 0; |
| } |
| |
| /* We don't need to call the API often, so using just one |
| * mailbox will probably suffice |
| */ |
| static int cx231xx_api_cmd(struct cx231xx *dev, u32 command, |
| u32 inputcnt, u32 outputcnt, ...) |
| { |
| u32 data[CX2341X_MBOX_MAX_DATA]; |
| va_list vargs; |
| int i, err; |
| |
| dprintk(3, "%s() cmds = 0x%08x\n", __func__, command); |
| |
| va_start(vargs, outputcnt); |
| for (i = 0; i < inputcnt; i++) |
| data[i] = va_arg(vargs, int); |
| |
| err = cx231xx_mbox_func(dev, command, inputcnt, outputcnt, data); |
| for (i = 0; i < outputcnt; i++) { |
| int *vptr = va_arg(vargs, int *); |
| *vptr = data[i]; |
| } |
| va_end(vargs); |
| |
| return err; |
| } |
| |
| |
| static int cx231xx_find_mailbox(struct cx231xx *dev) |
| { |
| u32 signature[4] = { |
| 0x12345678, 0x34567812, 0x56781234, 0x78123456 |
| }; |
| int signaturecnt = 0; |
| u32 value; |
| int i; |
| int ret = 0; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| for (i = 0; i < 0x100; i++) {/*CX231xx_FIRM_IMAGE_SIZE*/ |
| ret = mc417_memory_read(dev, i, &value); |
| if (ret < 0) |
| return ret; |
| if (value == signature[signaturecnt]) |
| signaturecnt++; |
| else |
| signaturecnt = 0; |
| if (4 == signaturecnt) { |
| dprintk(1, "Mailbox signature found at 0x%x\n", i + 1); |
| return i + 1; |
| } |
| } |
| dprintk(3, "Mailbox signature values not found!\n"); |
| return -EIO; |
| } |
| |
| static void mci_write_memory_to_gpio(struct cx231xx *dev, u32 address, u32 value, |
| u32 *p_fw_image) |
| { |
| u32 temp = 0; |
| int i = 0; |
| |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE0 | ((value & 0x000000FF) << 8); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| /*write data byte 1;*/ |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE1 | (value & 0x0000FF00); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| /*write data byte 2;*/ |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE2 | ((value & 0x00FF0000) >> 8); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| /*write data byte 3;*/ |
| temp = 0x82 | MCI_MEMORY_DATA_BYTE3 | ((value & 0xFF000000) >> 16); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| /* write address byte 2;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE2 | MCI_MODE_MEMORY_WRITE | |
| ((address & 0x003F0000) >> 8); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| /* write address byte 1;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE1 | (address & 0xFF00); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| /* write address byte 0;*/ |
| temp = 0x82 | MCI_MEMORY_ADDRESS_BYTE0 | ((address & 0x00FF) << 8); |
| temp = temp << 10; |
| *p_fw_image = temp; |
| p_fw_image++; |
| temp = temp | (0x05 << 10); |
| *p_fw_image = temp; |
| p_fw_image++; |
| |
| for (i = 0; i < 6; i++) { |
| *p_fw_image = 0xFFFFFFFF; |
| p_fw_image++; |
| } |
| } |
| |
| |
| static int cx231xx_load_firmware(struct cx231xx *dev) |
| { |
| static const unsigned char magic[8] = { |
| 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa |
| }; |
| const struct firmware *firmware; |
| int i, retval = 0; |
| u32 value = 0; |
| u32 gpio_output = 0; |
| /*u32 checksum = 0;*/ |
| /*u32 *dataptr;*/ |
| u32 transfer_size = 0; |
| u32 fw_data = 0; |
| u32 address = 0; |
| /*u32 current_fw[800];*/ |
| u32 *p_current_fw, *p_fw; |
| u32 *p_fw_data; |
| int frame = 0; |
| u8 *p_buffer; |
| |
| p_current_fw = vmalloc(1884180 * 4); |
| p_fw = p_current_fw; |
| if (p_current_fw == NULL) { |
| dprintk(2, "FAIL!!!\n"); |
| return -ENOMEM; |
| } |
| |
| p_buffer = vmalloc(EP5_BUF_SIZE); |
| if (p_buffer == NULL) { |
| dprintk(2, "FAIL!!!\n"); |
| vfree(p_current_fw); |
| return -ENOMEM; |
| } |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| /* Save GPIO settings before reset of APU */ |
| retval |= mc417_memory_read(dev, 0x9020, &gpio_output); |
| retval |= mc417_memory_read(dev, 0x900C, &value); |
| |
| retval = mc417_register_write(dev, |
| IVTV_REG_VPU, 0xFFFFFFED); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_APU, 0); |
| |
| if (retval != 0) { |
| dev_err(dev->dev, |
| "%s: Error with mc417_register_write\n", __func__); |
| vfree(p_current_fw); |
| vfree(p_buffer); |
| return retval; |
| } |
| |
| retval = request_firmware(&firmware, CX231xx_FIRM_IMAGE_NAME, |
| dev->dev); |
| |
| if (retval != 0) { |
| dev_err(dev->dev, |
| "ERROR: Hotplug firmware request failed (%s).\n", |
| CX231xx_FIRM_IMAGE_NAME); |
| dev_err(dev->dev, |
| "Please fix your hotplug setup, the board will not work without firmware loaded!\n"); |
| vfree(p_current_fw); |
| vfree(p_buffer); |
| return retval; |
| } |
| |
| if (firmware->size != CX231xx_FIRM_IMAGE_SIZE) { |
| dev_err(dev->dev, |
| "ERROR: Firmware size mismatch (have %zd, expected %d)\n", |
| firmware->size, CX231xx_FIRM_IMAGE_SIZE); |
| release_firmware(firmware); |
| vfree(p_current_fw); |
| vfree(p_buffer); |
| return -EINVAL; |
| } |
| |
| if (0 != memcmp(firmware->data, magic, 8)) { |
| dev_err(dev->dev, |
| "ERROR: Firmware magic mismatch, wrong file?\n"); |
| release_firmware(firmware); |
| vfree(p_current_fw); |
| vfree(p_buffer); |
| return -EINVAL; |
| } |
| |
| initGPIO(dev); |
| |
| /* transfer to the chip */ |
| dprintk(2, "Loading firmware to GPIO...\n"); |
| p_fw_data = (u32 *)firmware->data; |
| dprintk(2, "firmware->size=%zd\n", firmware->size); |
| for (transfer_size = 0; transfer_size < firmware->size; |
| transfer_size += 4) { |
| fw_data = *p_fw_data; |
| |
| mci_write_memory_to_gpio(dev, address, fw_data, p_current_fw); |
| address = address + 1; |
| p_current_fw += 20; |
| p_fw_data += 1; |
| } |
| |
| /*download the firmware by ep5-out*/ |
| |
| for (frame = 0; frame < (int)(CX231xx_FIRM_IMAGE_SIZE*20/EP5_BUF_SIZE); |
| frame++) { |
| for (i = 0; i < EP5_BUF_SIZE; i++) { |
| *(p_buffer + i) = (u8)(*(p_fw + (frame * 128 * 8 + (i / 4))) & 0x000000FF); |
| i++; |
| *(p_buffer + i) = (u8)((*(p_fw + (frame * 128 * 8 + (i / 4))) & 0x0000FF00) >> 8); |
| i++; |
| *(p_buffer + i) = (u8)((*(p_fw + (frame * 128 * 8 + (i / 4))) & 0x00FF0000) >> 16); |
| i++; |
| *(p_buffer + i) = (u8)((*(p_fw + (frame * 128 * 8 + (i / 4))) & 0xFF000000) >> 24); |
| } |
| cx231xx_ep5_bulkout(dev, p_buffer, EP5_BUF_SIZE); |
| } |
| |
| p_current_fw = p_fw; |
| vfree(p_current_fw); |
| p_current_fw = NULL; |
| vfree(p_buffer); |
| uninitGPIO(dev); |
| release_firmware(firmware); |
| dprintk(1, "Firmware upload successful.\n"); |
| |
| retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS, |
| IVTV_CMD_HW_BLOCKS_RST); |
| if (retval < 0) { |
| dev_err(dev->dev, |
| "%s: Error with mc417_register_write\n", |
| __func__); |
| return retval; |
| } |
| /* F/W power up disturbs the GPIOs, restore state */ |
| retval |= mc417_register_write(dev, 0x9020, gpio_output); |
| retval |= mc417_register_write(dev, 0x900C, value); |
| |
| retval |= mc417_register_read(dev, IVTV_REG_VPU, &value); |
| retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8); |
| |
| if (retval < 0) { |
| dev_err(dev->dev, |
| "%s: Error with mc417_register_write\n", |
| __func__); |
| return retval; |
| } |
| return 0; |
| } |
| |
| static void cx231xx_codec_settings(struct cx231xx *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| |
| /* assign frame size */ |
| cx231xx_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, |
| dev->ts1.height, dev->ts1.width); |
| |
| dev->mpeg_ctrl_handler.width = dev->ts1.width; |
| dev->mpeg_ctrl_handler.height = dev->ts1.height; |
| |
| cx2341x_handler_setup(&dev->mpeg_ctrl_handler); |
| |
| cx231xx_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1); |
| cx231xx_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1); |
| } |
| |
| static int cx231xx_initialize_codec(struct cx231xx *dev) |
| { |
| int version; |
| int retval; |
| u32 i; |
| u32 val = 0; |
| |
| dprintk(1, "%s()\n", __func__); |
| cx231xx_disable656(dev); |
| retval = cx231xx_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ |
| if (retval < 0) { |
| dprintk(2, "%s: PING OK\n", __func__); |
| retval = cx231xx_load_firmware(dev); |
| if (retval < 0) { |
| dev_err(dev->dev, |
| "%s: f/w load failed\n", __func__); |
| return retval; |
| } |
| retval = cx231xx_find_mailbox(dev); |
| if (retval < 0) { |
| dev_err(dev->dev, "%s: mailbox < 0, error\n", |
| __func__); |
| return retval; |
| } |
| dev->cx23417_mailbox = retval; |
| retval = cx231xx_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); |
| if (retval < 0) { |
| dev_err(dev->dev, |
| "ERROR: cx23417 firmware ping failed!\n"); |
| return retval; |
| } |
| retval = cx231xx_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, |
| &version); |
| if (retval < 0) { |
| dev_err(dev->dev, |
| "ERROR: cx23417 firmware get encoder: version failed!\n"); |
| return retval; |
| } |
| dprintk(1, "cx23417 firmware version is 0x%08x\n", version); |
| msleep(200); |
| } |
| |
| for (i = 0; i < 1; i++) { |
| retval = mc417_register_read(dev, 0x20f8, &val); |
| dprintk(3, "***before enable656() VIM Capture Lines = %d ***\n", |
| val); |
| if (retval < 0) |
| return retval; |
| } |
| |
| cx231xx_enable656(dev); |
| |
| /* stop mpeg capture */ |
| cx231xx_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, 1, 3, 4); |
| |
| cx231xx_codec_settings(dev); |
| msleep(60); |
| |
| /* cx231xx_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, |
| CX231xx_FIELD1_SAA7115, CX231xx_FIELD2_SAA7115); |
| cx231xx_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, |
| CX231xx_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0); |
| */ |
| |
| #if 0 |
| /* TODO */ |
| u32 data[7]; |
| |
| /* Setup to capture VBI */ |
| data[0] = 0x0001BD00; |
| data[1] = 1; /* frames per interrupt */ |
| data[2] = 4; /* total bufs */ |
| data[3] = 0x91559155; /* start codes */ |
| data[4] = 0x206080C0; /* stop codes */ |
| data[5] = 6; /* lines */ |
| data[6] = 64; /* BPL */ |
| |
| cx231xx_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1], |
| data[2], data[3], data[4], data[5], data[6]); |
| |
| for (i = 2; i <= 24; i++) { |
| int valid; |
| |
| valid = ((i >= 19) && (i <= 21)); |
| cx231xx_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i, |
| valid, 0 , 0, 0); |
| cx231xx_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, |
| i | 0x80000000, valid, 0, 0, 0); |
| } |
| #endif |
| /* cx231xx_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX231xx_UNMUTE); |
| msleep(60); |
| */ |
| /* initialize the video input */ |
| retval = cx231xx_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); |
| if (retval < 0) |
| return retval; |
| msleep(60); |
| |
| /* Enable VIP style pixel invalidation so we work with scaled mode */ |
| mc417_memory_write(dev, 2120, 0x00000080); |
| |
| /* start capturing to the host interface */ |
| retval = cx231xx_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, |
| CX231xx_MPEG_CAPTURE, CX231xx_RAW_BITS_NONE); |
| if (retval < 0) |
| return retval; |
| msleep(10); |
| |
| for (i = 0; i < 1; i++) { |
| mc417_register_read(dev, 0x20f8, &val); |
| dprintk(3, "***VIM Capture Lines =%d ***\n", val); |
| } |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int queue_setup(struct vb2_queue *vq, |
| unsigned int *nbuffers, unsigned int *nplanes, |
| unsigned int sizes[], struct device *alloc_devs[]) |
| { |
| struct cx231xx *dev = vb2_get_drv_priv(vq); |
| unsigned int size = mpeglinesize * mpeglines; |
| unsigned int q_num_bufs = vb2_get_num_buffers(vq); |
| |
| dev->ts1.ts_packet_size = mpeglinesize; |
| dev->ts1.ts_packet_count = mpeglines; |
| |
| if (q_num_bufs + *nbuffers < CX231XX_MIN_BUF) |
| *nbuffers = CX231XX_MIN_BUF - q_num_bufs; |
| |
| if (*nplanes) |
| return sizes[0] < size ? -EINVAL : 0; |
| *nplanes = 1; |
| sizes[0] = mpeglinesize * mpeglines; |
| |
| return 0; |
| } |
| |
| static void buffer_copy(struct cx231xx *dev, char *data, int len, struct urb *urb, |
| struct cx231xx_dmaqueue *dma_q) |
| { |
| void *vbuf; |
| struct cx231xx_buffer *buf; |
| u32 tail_data = 0; |
| char *p_data; |
| |
| if (dma_q->mpeg_buffer_done == 0) { |
| if (list_empty(&dma_q->active)) |
| return; |
| |
| buf = list_entry(dma_q->active.next, |
| struct cx231xx_buffer, list); |
| dev->video_mode.isoc_ctl.buf = buf; |
| dma_q->mpeg_buffer_done = 1; |
| } |
| /* Fill buffer */ |
| buf = dev->video_mode.isoc_ctl.buf; |
| vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); |
| |
| if ((dma_q->mpeg_buffer_completed+len) < |
| mpeglines*mpeglinesize) { |
| if (dma_q->add_ps_package_head == |
| CX231XX_NEED_ADD_PS_PACKAGE_HEAD) { |
| memcpy(vbuf+dma_q->mpeg_buffer_completed, |
| dma_q->ps_head, 3); |
| dma_q->mpeg_buffer_completed = |
| dma_q->mpeg_buffer_completed + 3; |
| dma_q->add_ps_package_head = |
| CX231XX_NONEED_PS_PACKAGE_HEAD; |
| } |
| memcpy(vbuf+dma_q->mpeg_buffer_completed, data, len); |
| dma_q->mpeg_buffer_completed = |
| dma_q->mpeg_buffer_completed + len; |
| } else { |
| dma_q->mpeg_buffer_done = 0; |
| |
| tail_data = |
| mpeglines*mpeglinesize - dma_q->mpeg_buffer_completed; |
| memcpy(vbuf+dma_q->mpeg_buffer_completed, |
| data, tail_data); |
| |
| buf->vb.vb2_buf.timestamp = ktime_get_ns(); |
| buf->vb.sequence = dma_q->sequence++; |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| dma_q->mpeg_buffer_completed = 0; |
| |
| if (len - tail_data > 0) { |
| p_data = data + tail_data; |
| dma_q->left_data_count = len - tail_data; |
| memcpy(dma_q->p_left_data, |
| p_data, len - tail_data); |
| } |
| } |
| } |
| |
| static void buffer_filled(char *data, int len, struct urb *urb, |
| struct cx231xx_dmaqueue *dma_q) |
| { |
| void *vbuf; |
| struct cx231xx_buffer *buf; |
| |
| if (list_empty(&dma_q->active)) |
| return; |
| |
| buf = list_entry(dma_q->active.next, struct cx231xx_buffer, list); |
| |
| /* Fill buffer */ |
| vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); |
| memcpy(vbuf, data, len); |
| buf->vb.sequence = dma_q->sequence++; |
| buf->vb.vb2_buf.timestamp = ktime_get_ns(); |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| } |
| |
| static int cx231xx_isoc_copy(struct cx231xx *dev, struct urb *urb) |
| { |
| struct cx231xx_dmaqueue *dma_q = urb->context; |
| unsigned char *p_buffer; |
| u32 buffer_size = 0; |
| u32 i = 0; |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| if (dma_q->left_data_count > 0) { |
| buffer_copy(dev, dma_q->p_left_data, |
| dma_q->left_data_count, urb, dma_q); |
| dma_q->mpeg_buffer_completed = dma_q->left_data_count; |
| dma_q->left_data_count = 0; |
| } |
| |
| p_buffer = urb->transfer_buffer + |
| urb->iso_frame_desc[i].offset; |
| buffer_size = urb->iso_frame_desc[i].actual_length; |
| |
| if (buffer_size > 0) |
| buffer_copy(dev, p_buffer, buffer_size, urb, dma_q); |
| } |
| |
| return 0; |
| } |
| |
| static int cx231xx_bulk_copy(struct cx231xx *dev, struct urb *urb) |
| { |
| struct cx231xx_dmaqueue *dma_q = urb->context; |
| unsigned char *p_buffer, *buffer; |
| u32 buffer_size = 0; |
| |
| p_buffer = urb->transfer_buffer; |
| buffer_size = urb->actual_length; |
| |
| buffer = kmalloc(buffer_size, GFP_ATOMIC); |
| if (!buffer) |
| return -ENOMEM; |
| |
| memcpy(buffer, dma_q->ps_head, 3); |
| memcpy(buffer+3, p_buffer, buffer_size-3); |
| memcpy(dma_q->ps_head, p_buffer+buffer_size-3, 3); |
| |
| p_buffer = buffer; |
| buffer_filled(p_buffer, buffer_size, urb, dma_q); |
| |
| kfree(buffer); |
| return 0; |
| } |
| |
| static void buffer_queue(struct vb2_buffer *vb) |
| { |
| struct cx231xx_buffer *buf = |
| container_of(vb, struct cx231xx_buffer, vb.vb2_buf); |
| struct cx231xx *dev = vb2_get_drv_priv(vb->vb2_queue); |
| struct cx231xx_dmaqueue *vidq = &dev->video_mode.vidq; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->video_mode.slock, flags); |
| list_add_tail(&buf->list, &vidq->active); |
| spin_unlock_irqrestore(&dev->video_mode.slock, flags); |
| } |
| |
| static void return_all_buffers(struct cx231xx *dev, |
| enum vb2_buffer_state state) |
| { |
| struct cx231xx_dmaqueue *vidq = &dev->video_mode.vidq; |
| struct cx231xx_buffer *buf, *node; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->video_mode.slock, flags); |
| list_for_each_entry_safe(buf, node, &vidq->active, list) { |
| vb2_buffer_done(&buf->vb.vb2_buf, state); |
| list_del(&buf->list); |
| } |
| spin_unlock_irqrestore(&dev->video_mode.slock, flags); |
| } |
| |
| static int start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct cx231xx *dev = vb2_get_drv_priv(vq); |
| struct cx231xx_dmaqueue *vidq = &dev->video_mode.vidq; |
| int ret = 0; |
| |
| vidq->sequence = 0; |
| dev->mode_tv = 1; |
| |
| cx231xx_set_alt_setting(dev, INDEX_VANC, 1); |
| cx231xx_set_gpio_value(dev, 2, 0); |
| |
| cx231xx_initialize_codec(dev); |
| |
| cx231xx_start_TS1(dev); |
| |
| cx231xx_set_alt_setting(dev, INDEX_TS1, 0); |
| cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE); |
| if (dev->USE_ISO) |
| ret = cx231xx_init_isoc(dev, CX231XX_NUM_PACKETS, |
| CX231XX_NUM_BUFS, |
| dev->ts1_mode.max_pkt_size, |
| cx231xx_isoc_copy); |
| else |
| ret = cx231xx_init_bulk(dev, 320, 5, |
| dev->ts1_mode.max_pkt_size, |
| cx231xx_bulk_copy); |
| if (ret) |
| return_all_buffers(dev, VB2_BUF_STATE_QUEUED); |
| |
| call_all(dev, video, s_stream, 1); |
| return ret; |
| } |
| |
| static void stop_streaming(struct vb2_queue *vq) |
| { |
| struct cx231xx *dev = vb2_get_drv_priv(vq); |
| unsigned long flags; |
| |
| call_all(dev, video, s_stream, 0); |
| |
| cx231xx_stop_TS1(dev); |
| |
| /* do this before setting alternate! */ |
| if (dev->USE_ISO) |
| cx231xx_uninit_isoc(dev); |
| else |
| cx231xx_uninit_bulk(dev); |
| cx231xx_set_mode(dev, CX231XX_SUSPEND); |
| |
| cx231xx_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, |
| CX231xx_END_NOW, CX231xx_MPEG_CAPTURE, |
| CX231xx_RAW_BITS_NONE); |
| |
| spin_lock_irqsave(&dev->video_mode.slock, flags); |
| if (dev->USE_ISO) |
| dev->video_mode.isoc_ctl.buf = NULL; |
| else |
| dev->video_mode.bulk_ctl.buf = NULL; |
| spin_unlock_irqrestore(&dev->video_mode.slock, flags); |
| return_all_buffers(dev, VB2_BUF_STATE_ERROR); |
| } |
| |
| static struct vb2_ops cx231xx_video_qops = { |
| .queue_setup = queue_setup, |
| .buf_queue = buffer_queue, |
| .start_streaming = start_streaming, |
| .stop_streaming = stop_streaming, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int vidioc_g_pixelaspect(struct file *file, void *priv, |
| int type, struct v4l2_fract *f) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| bool is_50hz = dev->encodernorm.id & V4L2_STD_625_50; |
| |
| if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| f->numerator = is_50hz ? 54 : 11; |
| f->denominator = is_50hz ? 59 : 10; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_selection(struct file *file, void *priv, |
| struct v4l2_selection *s) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| |
| if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| switch (s->target) { |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| case V4L2_SEL_TGT_CROP_DEFAULT: |
| s->r.left = 0; |
| s->r.top = 0; |
| s->r.width = dev->ts1.width; |
| s->r.height = dev->ts1.height; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vidioc_g_std(struct file *file, void *fh0, v4l2_std_id *norm) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| |
| *norm = dev->encodernorm.id; |
| return 0; |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cx231xx_tvnorms); i++) |
| if (id & cx231xx_tvnorms[i].id) |
| break; |
| if (i == ARRAY_SIZE(cx231xx_tvnorms)) |
| return -EINVAL; |
| dev->encodernorm = cx231xx_tvnorms[i]; |
| |
| if (dev->encodernorm.id & 0xb000) { |
| dprintk(3, "encodernorm set to NTSC\n"); |
| dev->norm = V4L2_STD_NTSC; |
| dev->ts1.height = 480; |
| cx2341x_handler_set_50hz(&dev->mpeg_ctrl_handler, false); |
| } else { |
| dprintk(3, "encodernorm set to PAL\n"); |
| dev->norm = V4L2_STD_PAL_B; |
| dev->ts1.height = 576; |
| cx2341x_handler_set_50hz(&dev->mpeg_ctrl_handler, true); |
| } |
| call_all(dev, video, s_std, dev->norm); |
| /* do mode control overrides */ |
| cx231xx_do_mode_ctrl_overrides(dev); |
| |
| dprintk(3, "exit vidioc_s_std() i=0x%x\n", i); |
| return 0; |
| } |
| |
| static int vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctl) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| struct v4l2_subdev *sd; |
| |
| dprintk(3, "enter vidioc_s_ctrl()\n"); |
| /* Update the A/V core */ |
| v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) |
| v4l2_s_ctrl(NULL, sd->ctrl_handler, ctl); |
| dprintk(3, "exit vidioc_s_ctrl()\n"); |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (f->index != 0) |
| return -EINVAL; |
| |
| f->pixelformat = V4L2_PIX_FMT_MPEG; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| |
| dprintk(3, "enter vidioc_g_fmt_vid_cap()\n"); |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.bytesperline = 0; |
| f->fmt.pix.sizeimage = mpeglines * mpeglinesize; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| f->fmt.pix.width = dev->ts1.width; |
| f->fmt.pix.height = dev->ts1.height; |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d\n", |
| dev->ts1.width, dev->ts1.height); |
| dprintk(3, "exit vidioc_g_fmt_vid_cap()\n"); |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| |
| dprintk(3, "enter vidioc_try_fmt_vid_cap()\n"); |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.bytesperline = 0; |
| f->fmt.pix.sizeimage = mpeglines * mpeglinesize; |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d\n", |
| dev->ts1.width, dev->ts1.height); |
| dprintk(3, "exit vidioc_try_fmt_vid_cap()\n"); |
| return 0; |
| } |
| |
| static int vidioc_log_status(struct file *file, void *priv) |
| { |
| struct cx231xx *dev = video_drvdata(file); |
| |
| call_all(dev, core, log_status); |
| return v4l2_ctrl_log_status(file, priv); |
| } |
| |
| static const struct v4l2_file_operations mpeg_fops = { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .read = vb2_fop_read, |
| .poll = vb2_fop_poll, |
| .mmap = vb2_fop_mmap, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_g_std = vidioc_g_std, |
| .vidioc_g_tuner = cx231xx_g_tuner, |
| .vidioc_s_tuner = cx231xx_s_tuner, |
| .vidioc_g_frequency = cx231xx_g_frequency, |
| .vidioc_s_frequency = cx231xx_s_frequency, |
| .vidioc_enum_input = cx231xx_enum_input, |
| .vidioc_g_input = cx231xx_g_input, |
| .vidioc_s_input = cx231xx_s_input, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| .vidioc_g_pixelaspect = vidioc_g_pixelaspect, |
| .vidioc_g_selection = vidioc_g_selection, |
| .vidioc_querycap = cx231xx_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| .vidioc_log_status = vidioc_log_status, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .vidioc_g_register = cx231xx_g_register, |
| .vidioc_s_register = cx231xx_s_register, |
| #endif |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static struct video_device cx231xx_mpeg_template = { |
| .name = "cx231xx", |
| .fops = &mpeg_fops, |
| .ioctl_ops = &mpeg_ioctl_ops, |
| .minor = -1, |
| .tvnorms = V4L2_STD_ALL, |
| }; |
| |
| void cx231xx_417_unregister(struct cx231xx *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| dprintk(3, "%s()\n", __func__); |
| |
| if (video_is_registered(&dev->v4l_device)) { |
| video_unregister_device(&dev->v4l_device); |
| v4l2_ctrl_handler_free(&dev->mpeg_ctrl_handler.hdl); |
| } |
| } |
| |
| static int cx231xx_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) |
| { |
| struct cx231xx *dev = container_of(cxhdl, struct cx231xx, mpeg_ctrl_handler); |
| int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; |
| struct v4l2_subdev_format format = { |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| }; |
| |
| /* fix videodecoder resolution */ |
| format.format.width = cxhdl->width / (is_mpeg1 ? 2 : 1); |
| format.format.height = cxhdl->height; |
| format.format.code = MEDIA_BUS_FMT_FIXED; |
| v4l2_subdev_call(dev->sd_cx25840, pad, set_fmt, NULL, &format); |
| return 0; |
| } |
| |
| static int cx231xx_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx) |
| { |
| static const u32 freqs[3] = { 44100, 48000, 32000 }; |
| struct cx231xx *dev = container_of(cxhdl, struct cx231xx, mpeg_ctrl_handler); |
| |
| /* The audio clock of the digitizer must match the codec sample |
| rate otherwise you get some very strange effects. */ |
| if (idx < ARRAY_SIZE(freqs)) |
| call_all(dev, audio, s_clock_freq, freqs[idx]); |
| return 0; |
| } |
| |
| static const struct cx2341x_handler_ops cx231xx_ops = { |
| /* needed for the video clock freq */ |
| .s_audio_sampling_freq = cx231xx_s_audio_sampling_freq, |
| /* needed for setting up the video resolution */ |
| .s_video_encoding = cx231xx_s_video_encoding, |
| }; |
| |
| static void cx231xx_video_dev_init( |
| struct cx231xx *dev, |
| struct usb_device *usbdev, |
| struct video_device *vfd, |
| const struct video_device *template, |
| const char *type) |
| { |
| dprintk(1, "%s()\n", __func__); |
| *vfd = *template; |
| snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, |
| type, cx231xx_boards[dev->model].name); |
| |
| vfd->v4l2_dev = &dev->v4l2_dev; |
| vfd->lock = &dev->lock; |
| vfd->release = video_device_release_empty; |
| vfd->ctrl_handler = &dev->mpeg_ctrl_handler.hdl; |
| video_set_drvdata(vfd, dev); |
| if (dev->tuner_type == TUNER_ABSENT) { |
| v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY); |
| v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY); |
| v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER); |
| v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER); |
| } |
| } |
| |
| int cx231xx_417_register(struct cx231xx *dev) |
| { |
| /* FIXME: Port1 hardcoded here */ |
| int err; |
| struct cx231xx_tsport *tsport = &dev->ts1; |
| struct vb2_queue *q; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| /* Set default TV standard */ |
| dev->encodernorm = cx231xx_tvnorms[0]; |
| |
| if (dev->encodernorm.id & V4L2_STD_525_60) |
| tsport->height = 480; |
| else |
| tsport->height = 576; |
| |
| tsport->width = 720; |
| err = cx2341x_handler_init(&dev->mpeg_ctrl_handler, 50); |
| if (err) { |
| dprintk(3, "%s: can't init cx2341x controls\n", dev->name); |
| return err; |
| } |
| dev->mpeg_ctrl_handler.func = cx231xx_mbox_func; |
| dev->mpeg_ctrl_handler.priv = dev; |
| dev->mpeg_ctrl_handler.ops = &cx231xx_ops; |
| if (dev->sd_cx25840) |
| v4l2_ctrl_add_handler(&dev->mpeg_ctrl_handler.hdl, |
| dev->sd_cx25840->ctrl_handler, NULL, false); |
| if (dev->mpeg_ctrl_handler.hdl.error) { |
| err = dev->mpeg_ctrl_handler.hdl.error; |
| dprintk(3, "%s: can't add cx25840 controls\n", dev->name); |
| v4l2_ctrl_handler_free(&dev->mpeg_ctrl_handler.hdl); |
| return err; |
| } |
| dev->norm = V4L2_STD_NTSC; |
| |
| dev->mpeg_ctrl_handler.port = CX2341X_PORT_SERIAL; |
| cx2341x_handler_set_50hz(&dev->mpeg_ctrl_handler, false); |
| |
| /* Allocate and initialize V4L video device */ |
| cx231xx_video_dev_init(dev, dev->udev, |
| &dev->v4l_device, &cx231xx_mpeg_template, "mpeg"); |
| q = &dev->mpegq; |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_USERPTR | VB2_MMAP | VB2_DMABUF | VB2_READ; |
| q->drv_priv = dev; |
| q->buf_struct_size = sizeof(struct cx231xx_buffer); |
| q->ops = &cx231xx_video_qops; |
| q->mem_ops = &vb2_vmalloc_memops; |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->min_queued_buffers = 1; |
| q->lock = &dev->lock; |
| err = vb2_queue_init(q); |
| if (err) |
| return err; |
| dev->v4l_device.queue = q; |
| |
| err = video_register_device(&dev->v4l_device, |
| VFL_TYPE_VIDEO, -1); |
| if (err < 0) { |
| dprintk(3, "%s: can't register mpeg device\n", dev->name); |
| v4l2_ctrl_handler_free(&dev->mpeg_ctrl_handler.hdl); |
| return err; |
| } |
| |
| dprintk(3, "%s: registered device video%d [mpeg]\n", |
| dev->name, dev->v4l_device.num); |
| |
| return 0; |
| } |
| |
| MODULE_FIRMWARE(CX231xx_FIRM_IMAGE_NAME); |