| /* |
| * BSD LICENSE |
| * |
| * Copyright(c) 2015-2017 Broadcom. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Broadcom nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "brcm,stingray"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| }; |
| |
| cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER1_L2>; |
| }; |
| |
| cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER1_L2>; |
| }; |
| |
| cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x200>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER2_L2>; |
| }; |
| |
| cpu@201 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x201>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER2_L2>; |
| }; |
| |
| cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x300>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER3_L2>; |
| }; |
| |
| cpu@301 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| reg = <0x0 0x301>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER3_L2>; |
| }; |
| |
| CLUSTER0_L2: l2-cache@0 { |
| compatible = "cache"; |
| }; |
| |
| CLUSTER1_L2: l2-cache@100 { |
| compatible = "cache"; |
| }; |
| |
| CLUSTER2_L2: l2-cache@200 { |
| compatible = "cache"; |
| }; |
| |
| CLUSTER3_L2: l2-cache@300 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| memory: memory@80000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x80000000 0 0x40000000>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| mhb: syscon@60401000 { |
| compatible = "brcm,sr-mhb", "syscon"; |
| reg = <0 0x60401000 0 0x38c>; |
| }; |
| |
| scr { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x61000000 0x05000000>; |
| |
| ccn: ccn@0 { |
| compatible = "arm,ccn-502"; |
| reg = <0x00000000 0x900000>; |
| interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gic: interrupt-controller@2c00000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| reg = <0x02c00000 0x010000>, /* GICD */ |
| <0x02e00000 0x600000>; /* GICR */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gic_its: gic-its@63c20000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| #msi-cells = <1>; |
| reg = <0x02c20000 0x10000>; |
| }; |
| }; |
| |
| smmu: mmu@3000000 { |
| compatible = "arm,mmu-500"; |
| reg = <0x03000000 0x80000>; |
| #global-interrupts = <1>; |
| interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <2>; |
| }; |
| }; |
| |
| crmu: crmu { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x66400000 0x100000>; |
| |
| #include "stingray-clock.dtsi" |
| |
| otp: otp@1c400 { |
| compatible = "brcm,ocotp-v2"; |
| reg = <0x0001c400 0x68>; |
| brcm,ocotp-size = <2048>; |
| status = "okay"; |
| }; |
| |
| cdru: syscon@1d000 { |
| compatible = "brcm,sr-cdru", "syscon"; |
| reg = <0x0001d000 0x400>; |
| }; |
| |
| gpio_crmu: gpio@24800 { |
| compatible = "brcm,iproc-gpio"; |
| reg = <0x00024800 0x4c>; |
| ngpios = <6>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| }; |
| |
| #include "stingray-fs4.dtsi" |
| #include "stingray-sata.dtsi" |
| #include "stingray-pcie.dtsi" |
| #include "stingray-usb.dtsi" |
| |
| hsls { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x68900000 0x17700000>; |
| |
| #include "stingray-pinctrl.dtsi" |
| |
| mdio_mux_iproc: mdio-mux@20000 { |
| compatible = "brcm,mdio-mux-iproc"; |
| reg = <0x00020000 0x250>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { /* PCIe serdes */ |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mdio@2 { /* SATA */ |
| reg = <0x2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mdio@3 { /* USB */ |
| reg = <0x3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mdio@10 { /* RGMII */ |
| reg = <0x10>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| pwm: pwm@10000 { |
| compatible = "brcm,iproc-pwm"; |
| reg = <0x00010000 0x1000>; |
| clocks = <&crmu_ref25m>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer0: timer@30000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00030000 0x1000>; |
| interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer1: timer@40000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00040000 0x1000>; |
| interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| timer2: timer@50000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00050000 0x1000>; |
| interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer3: timer@60000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00060000 0x1000>; |
| interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer4: timer@70000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00070000 0x1000>; |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer5: timer@80000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00080000 0x1000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer6: timer@90000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x00090000 0x1000>; |
| interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer7: timer@a0000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x000a0000 0x1000>; |
| interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, |
| <&hsls_25m_div2_clk>, |
| <&hsls_div4_clk>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@b0000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x000b0000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| wdt0: watchdog@c0000 { |
| compatible = "arm,sp805", "arm,primecell"; |
| reg = <0x000c0000 0x1000>; |
| interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; |
| clock-names = "wdog_clk", "apb_pclk"; |
| timeout-sec = <60>; |
| }; |
| |
| gpio_hsls: gpio@d0000 { |
| compatible = "brcm,iproc-gpio"; |
| reg = <0x000d0000 0x864>; |
| ngpios = <151>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-ranges = <&pinmux 0 0 16>, |
| <&pinmux 16 71 2>, |
| <&pinmux 18 131 8>, |
| <&pinmux 26 83 6>, |
| <&pinmux 32 123 4>, |
| <&pinmux 36 43 24>, |
| <&pinmux 60 89 2>, |
| <&pinmux 62 73 4>, |
| <&pinmux 66 95 28>, |
| <&pinmux 94 127 4>, |
| <&pinmux 98 139 10>, |
| <&pinmux 108 16 27>, |
| <&pinmux 135 77 6>, |
| <&pinmux 141 67 4>, |
| <&pinmux 145 149 6>; |
| }; |
| |
| i2c1: i2c@e0000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x000e0000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| uart0: uart@100000 { |
| device_type = "serial"; |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x00100000 0x1000>; |
| reg-shift = <2>; |
| clock-frequency = <25000000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart1: uart@110000 { |
| device_type = "serial"; |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x00110000 0x1000>; |
| reg-shift = <2>; |
| clock-frequency = <25000000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart2: uart@120000 { |
| device_type = "serial"; |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x00120000 0x1000>; |
| reg-shift = <2>; |
| clock-frequency = <25000000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart3: uart@130000 { |
| device_type = "serial"; |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x00130000 0x1000>; |
| reg-shift = <2>; |
| clock-frequency = <25000000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| ssp0: spi@180000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x00180000 0x1000>; |
| interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; |
| clock-names = "spiclk", "apb_pclk"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp1: spi@190000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x00190000 0x1000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; |
| clock-names = "spiclk", "apb_pclk"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hwrng: hwrng@220000 { |
| compatible = "brcm,iproc-rng200"; |
| reg = <0x00220000 0x28>; |
| }; |
| |
| dma0: dma@310000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x00310000 0x1000>; |
| interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| clocks = <&hsls_div2_clk>; |
| clock-names = "apb_pclk"; |
| iommus = <&smmu 0x6000 0x0000>; |
| }; |
| |
| enet: ethernet@340000{ |
| compatible = "brcm,amac"; |
| reg = <0x00340000 0x1000>; |
| reg-names = "amac_base"; |
| dma-coherent; |
| interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; |
| status= "disabled"; |
| }; |
| |
| nand: nand@360000 { |
| compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| reg = <0x00360000 0x600>, |
| <0x0050a408 0x600>, |
| <0x00360f00 0x20>; |
| reg-names = "nand", "iproc-idm", "iproc-ext"; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| brcm,nand-has-wp; |
| status = "disabled"; |
| }; |
| |
| sdio0: sdhci@3f1000 { |
| compatible = "brcm,sdhci-iproc"; |
| reg = <0x003f1000 0x100>; |
| interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; |
| bus-width = <8>; |
| clocks = <&sdio0_clk>; |
| iommus = <&smmu 0x6002 0x0000>; |
| status = "disabled"; |
| }; |
| |
| sdio1: sdhci@3f2000 { |
| compatible = "brcm,sdhci-iproc"; |
| reg = <0x003f2000 0x100>; |
| interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; |
| bus-width = <8>; |
| clocks = <&sdio1_clk>; |
| iommus = <&smmu 0x6003 0x0000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| tmons { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x8f100000 0x100>; |
| |
| tmon: tmon@0 { |
| compatible = "brcm,sr-thermal"; |
| reg = <0x0 0x40>; |
| brcm,tmon-mask = <0x3f>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| thermal-zones { |
| ihost0_thermal: ihost0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tmon 0>; |
| trips { |
| cpu-crit { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| ihost1_thermal: ihost1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tmon 1>; |
| trips { |
| cpu-crit { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| ihost2_thermal: ihost2-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tmon 2>; |
| trips { |
| cpu-crit { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| ihost3_thermal: ihost3-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tmon 3>; |
| trips { |
| cpu-crit { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| crmu_thermal: crmu-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tmon 4>; |
| trips { |
| cpu-crit { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| nitro_thermal: nitro-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tmon 5>; |
| trips { |
| cpu-crit { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| nic-hsls { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x0 0x7fffffff>; |
| |
| nic_i2c0: i2c@60826100 { |
| compatible = "brcm,iproc-nic-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x60826100 0x100>, |
| <0x60e00408 0x1000>; |
| brcm,ape-hsls-addr-mask = <0x03400000>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
