| /* |
| * arch/s390/kernel/signal.c |
| * |
| * S390 version |
| * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) |
| * |
| * Based on Intel version |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/ptrace.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/tty.h> |
| #include <linux/personality.h> |
| #include <linux/binfmts.h> |
| #include <asm/ucontext.h> |
| #include <asm/uaccess.h> |
| #include <asm/lowcore.h> |
| |
| #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) |
| |
| |
| typedef struct |
| { |
| __u8 callee_used_stack[__SIGNAL_FRAMESIZE]; |
| struct sigcontext sc; |
| _sigregs sregs; |
| int signo; |
| __u8 retcode[S390_SYSCALL_SIZE]; |
| } sigframe; |
| |
| typedef struct |
| { |
| __u8 callee_used_stack[__SIGNAL_FRAMESIZE]; |
| __u8 retcode[S390_SYSCALL_SIZE]; |
| struct siginfo info; |
| struct ucontext uc; |
| } rt_sigframe; |
| |
| int do_signal(struct pt_regs *regs, sigset_t *oldset); |
| |
| /* |
| * Atomically swap in the new signal mask, and wait for a signal. |
| */ |
| asmlinkage int |
| sys_sigsuspend(struct pt_regs * regs, int history0, int history1, |
| old_sigset_t mask) |
| { |
| sigset_t saveset; |
| |
| mask &= _BLOCKABLE; |
| spin_lock_irq(¤t->sighand->siglock); |
| saveset = current->blocked; |
| siginitset(¤t->blocked, mask); |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| regs->gprs[2] = -EINTR; |
| |
| while (1) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule(); |
| if (do_signal(regs, &saveset)) |
| return -EINTR; |
| } |
| } |
| |
| asmlinkage long |
| sys_rt_sigsuspend(struct pt_regs *regs, sigset_t __user *unewset, |
| size_t sigsetsize) |
| { |
| sigset_t saveset, newset; |
| |
| /* XXX: Don't preclude handling different sized sigset_t's. */ |
| if (sigsetsize != sizeof(sigset_t)) |
| return -EINVAL; |
| |
| if (copy_from_user(&newset, unewset, sizeof(newset))) |
| return -EFAULT; |
| sigdelsetmask(&newset, ~_BLOCKABLE); |
| |
| spin_lock_irq(¤t->sighand->siglock); |
| saveset = current->blocked; |
| current->blocked = newset; |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| regs->gprs[2] = -EINTR; |
| |
| while (1) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule(); |
| if (do_signal(regs, &saveset)) |
| return -EINTR; |
| } |
| } |
| |
| asmlinkage long |
| sys_sigaction(int sig, const struct old_sigaction __user *act, |
| struct old_sigaction __user *oact) |
| { |
| struct k_sigaction new_ka, old_ka; |
| int ret; |
| |
| if (act) { |
| old_sigset_t mask; |
| if (!access_ok(VERIFY_READ, act, sizeof(*act)) || |
| __get_user(new_ka.sa.sa_handler, &act->sa_handler) || |
| __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) |
| return -EFAULT; |
| __get_user(new_ka.sa.sa_flags, &act->sa_flags); |
| __get_user(mask, &act->sa_mask); |
| siginitset(&new_ka.sa.sa_mask, mask); |
| } |
| |
| ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); |
| |
| if (!ret && oact) { |
| if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || |
| __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || |
| __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) |
| return -EFAULT; |
| __put_user(old_ka.sa.sa_flags, &oact->sa_flags); |
| __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); |
| } |
| |
| return ret; |
| } |
| |
| asmlinkage long |
| sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, |
| struct pt_regs *regs) |
| { |
| return do_sigaltstack(uss, uoss, regs->gprs[15]); |
| } |
| |
| |
| |
| /* Returns non-zero on fault. */ |
| static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs) |
| { |
| unsigned long old_mask = regs->psw.mask; |
| int err; |
| |
| save_access_regs(current->thread.acrs); |
| |
| /* Copy a 'clean' PSW mask to the user to avoid leaking |
| information about whether PER is currently on. */ |
| regs->psw.mask = PSW_MASK_MERGE(PSW_USER_BITS, regs->psw.mask); |
| err = __copy_to_user(&sregs->regs.psw, ®s->psw, |
| sizeof(sregs->regs.psw)+sizeof(sregs->regs.gprs)); |
| regs->psw.mask = old_mask; |
| if (err != 0) |
| return err; |
| err = __copy_to_user(&sregs->regs.acrs, current->thread.acrs, |
| sizeof(sregs->regs.acrs)); |
| if (err != 0) |
| return err; |
| /* |
| * We have to store the fp registers to current->thread.fp_regs |
| * to merge them with the emulated registers. |
| */ |
| save_fp_regs(¤t->thread.fp_regs); |
| return __copy_to_user(&sregs->fpregs, ¤t->thread.fp_regs, |
| sizeof(s390_fp_regs)); |
| } |
| |
| /* Returns positive number on error */ |
| static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) |
| { |
| unsigned long old_mask = regs->psw.mask; |
| int err; |
| |
| /* Alwys make any pending restarted system call return -EINTR */ |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; |
| |
| err = __copy_from_user(®s->psw, &sregs->regs.psw, |
| sizeof(sregs->regs.psw)+sizeof(sregs->regs.gprs)); |
| regs->psw.mask = PSW_MASK_MERGE(old_mask, regs->psw.mask); |
| regs->psw.addr |= PSW_ADDR_AMODE; |
| if (err) |
| return err; |
| err = __copy_from_user(¤t->thread.acrs, &sregs->regs.acrs, |
| sizeof(sregs->regs.acrs)); |
| if (err) |
| return err; |
| restore_access_regs(current->thread.acrs); |
| |
| err = __copy_from_user(¤t->thread.fp_regs, &sregs->fpregs, |
| sizeof(s390_fp_regs)); |
| current->thread.fp_regs.fpc &= FPC_VALID_MASK; |
| if (err) |
| return err; |
| |
| restore_fp_regs(¤t->thread.fp_regs); |
| regs->trap = -1; /* disable syscall checks */ |
| return 0; |
| } |
| |
| asmlinkage long sys_sigreturn(struct pt_regs *regs) |
| { |
| sigframe __user *frame = (sigframe __user *)regs->gprs[15]; |
| sigset_t set; |
| |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) |
| goto badframe; |
| if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE)) |
| goto badframe; |
| |
| sigdelsetmask(&set, ~_BLOCKABLE); |
| spin_lock_irq(¤t->sighand->siglock); |
| current->blocked = set; |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| if (restore_sigregs(regs, &frame->sregs)) |
| goto badframe; |
| |
| return regs->gprs[2]; |
| |
| badframe: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) |
| { |
| rt_sigframe __user *frame = (rt_sigframe __user *)regs->gprs[15]; |
| sigset_t set; |
| |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) |
| goto badframe; |
| if (__copy_from_user(&set.sig, &frame->uc.uc_sigmask, sizeof(set))) |
| goto badframe; |
| |
| sigdelsetmask(&set, ~_BLOCKABLE); |
| spin_lock_irq(¤t->sighand->siglock); |
| current->blocked = set; |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| if (restore_sigregs(regs, &frame->uc.uc_mcontext)) |
| goto badframe; |
| |
| /* It is more difficult to avoid calling this function than to |
| call it and ignore errors. */ |
| do_sigaltstack(&frame->uc.uc_stack, NULL, regs->gprs[15]); |
| return regs->gprs[2]; |
| |
| badframe: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| |
| /* |
| * Determine which stack to use.. |
| */ |
| static inline void __user * |
| get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) |
| { |
| unsigned long sp; |
| |
| /* Default to using normal stack */ |
| sp = regs->gprs[15]; |
| |
| /* This is the X/Open sanctioned signal stack switching. */ |
| if (ka->sa.sa_flags & SA_ONSTACK) { |
| if (! sas_ss_flags(sp)) |
| sp = current->sas_ss_sp + current->sas_ss_size; |
| } |
| |
| /* This is the legacy signal stack switching. */ |
| else if (!user_mode(regs) && |
| !(ka->sa.sa_flags & SA_RESTORER) && |
| ka->sa.sa_restorer) { |
| sp = (unsigned long) ka->sa.sa_restorer; |
| } |
| |
| return (void __user *)((sp - frame_size) & -8ul); |
| } |
| |
| static inline int map_signal(int sig) |
| { |
| if (current_thread_info()->exec_domain |
| && current_thread_info()->exec_domain->signal_invmap |
| && sig < 32) |
| return current_thread_info()->exec_domain->signal_invmap[sig]; |
| else |
| return sig; |
| } |
| |
| static void setup_frame(int sig, struct k_sigaction *ka, |
| sigset_t *set, struct pt_regs * regs) |
| { |
| sigframe __user *frame; |
| |
| frame = get_sigframe(ka, regs, sizeof(sigframe)); |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(sigframe))) |
| goto give_sigsegv; |
| |
| if (__copy_to_user(&frame->sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE)) |
| goto give_sigsegv; |
| |
| if (save_sigregs(regs, &frame->sregs)) |
| goto give_sigsegv; |
| if (__put_user(&frame->sregs, &frame->sc.sregs)) |
| goto give_sigsegv; |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. */ |
| if (ka->sa.sa_flags & SA_RESTORER) { |
| regs->gprs[14] = (unsigned long) |
| ka->sa.sa_restorer | PSW_ADDR_AMODE; |
| } else { |
| regs->gprs[14] = (unsigned long) |
| frame->retcode | PSW_ADDR_AMODE; |
| if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, |
| (u16 __user *)(frame->retcode))) |
| goto give_sigsegv; |
| } |
| |
| /* Set up backchain. */ |
| if (__put_user(regs->gprs[15], (addr_t __user *) frame)) |
| goto give_sigsegv; |
| |
| /* Set up registers for signal handler */ |
| regs->gprs[15] = (unsigned long) frame; |
| regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE; |
| |
| regs->gprs[2] = map_signal(sig); |
| regs->gprs[3] = (unsigned long) &frame->sc; |
| |
| /* We forgot to include these in the sigcontext. |
| To avoid breaking binary compatibility, they are passed as args. */ |
| regs->gprs[4] = current->thread.trap_no; |
| regs->gprs[5] = current->thread.prot_addr; |
| |
| /* Place signal number on stack to allow backtrace from handler. */ |
| if (__put_user(regs->gprs[2], (int __user *) &frame->signo)) |
| goto give_sigsegv; |
| return; |
| |
| give_sigsegv: |
| force_sigsegv(sig, current); |
| } |
| |
| static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, |
| sigset_t *set, struct pt_regs * regs) |
| { |
| int err = 0; |
| rt_sigframe __user *frame; |
| |
| frame = get_sigframe(ka, regs, sizeof(rt_sigframe)); |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(rt_sigframe))) |
| goto give_sigsegv; |
| |
| if (copy_siginfo_to_user(&frame->info, info)) |
| goto give_sigsegv; |
| |
| /* Create the ucontext. */ |
| err |= __put_user(0, &frame->uc.uc_flags); |
| err |= __put_user(NULL, &frame->uc.uc_link); |
| err |= __put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); |
| err |= __put_user(sas_ss_flags(regs->gprs[15]), |
| &frame->uc.uc_stack.ss_flags); |
| err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); |
| err |= save_sigregs(regs, &frame->uc.uc_mcontext); |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); |
| if (err) |
| goto give_sigsegv; |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. */ |
| if (ka->sa.sa_flags & SA_RESTORER) { |
| regs->gprs[14] = (unsigned long) |
| ka->sa.sa_restorer | PSW_ADDR_AMODE; |
| } else { |
| regs->gprs[14] = (unsigned long) |
| frame->retcode | PSW_ADDR_AMODE; |
| err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, |
| (u16 __user *)(frame->retcode)); |
| } |
| |
| /* Set up backchain. */ |
| if (__put_user(regs->gprs[15], (addr_t __user *) frame)) |
| goto give_sigsegv; |
| |
| /* Set up registers for signal handler */ |
| regs->gprs[15] = (unsigned long) frame; |
| regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE; |
| |
| regs->gprs[2] = map_signal(sig); |
| regs->gprs[3] = (unsigned long) &frame->info; |
| regs->gprs[4] = (unsigned long) &frame->uc; |
| return; |
| |
| give_sigsegv: |
| force_sigsegv(sig, current); |
| } |
| |
| /* |
| * OK, we're invoking a handler |
| */ |
| |
| static void |
| handle_signal(unsigned long sig, struct k_sigaction *ka, |
| siginfo_t *info, sigset_t *oldset, struct pt_regs * regs) |
| { |
| /* Set up the stack frame */ |
| if (ka->sa.sa_flags & SA_SIGINFO) |
| setup_rt_frame(sig, ka, info, oldset, regs); |
| else |
| setup_frame(sig, ka, oldset, regs); |
| |
| spin_lock_irq(¤t->sighand->siglock); |
| sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); |
| if (!(ka->sa.sa_flags & SA_NODEFER)) |
| sigaddset(¤t->blocked,sig); |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| } |
| |
| /* |
| * Note that 'init' is a special process: it doesn't get signals it doesn't |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by |
| * mistake. |
| * |
| * Note that we go through the signals twice: once to check the signals that |
| * the kernel can handle, and then we build all the user-level signal handling |
| * stack-frames in one go after that. |
| */ |
| int do_signal(struct pt_regs *regs, sigset_t *oldset) |
| { |
| unsigned long retval = 0, continue_addr = 0, restart_addr = 0; |
| siginfo_t info; |
| int signr; |
| struct k_sigaction ka; |
| |
| /* |
| * We want the common case to go fast, which |
| * is why we may in certain cases get here from |
| * kernel mode. Just return without doing anything |
| * if so. |
| */ |
| if (!user_mode(regs)) |
| return 1; |
| |
| if (!oldset) |
| oldset = ¤t->blocked; |
| |
| /* Are we from a system call? */ |
| if (regs->trap == __LC_SVC_OLD_PSW) { |
| continue_addr = regs->psw.addr; |
| restart_addr = continue_addr - regs->ilc; |
| retval = regs->gprs[2]; |
| |
| /* Prepare for system call restart. We do this here so that a |
| debugger will see the already changed PSW. */ |
| if (retval == -ERESTARTNOHAND || |
| retval == -ERESTARTSYS || |
| retval == -ERESTARTNOINTR) { |
| regs->gprs[2] = regs->orig_gpr2; |
| regs->psw.addr = restart_addr; |
| } else if (retval == -ERESTART_RESTARTBLOCK) { |
| regs->gprs[2] = -EINTR; |
| } |
| } |
| |
| /* Get signal to deliver. When running under ptrace, at this point |
| the debugger may change all our registers ... */ |
| signr = get_signal_to_deliver(&info, &ka, regs, NULL); |
| |
| /* Depending on the signal settings we may need to revert the |
| decision to restart the system call. */ |
| if (signr > 0 && regs->psw.addr == restart_addr) { |
| if (retval == -ERESTARTNOHAND |
| || (retval == -ERESTARTSYS |
| && !(current->sighand->action[signr-1].sa.sa_flags |
| & SA_RESTART))) { |
| regs->gprs[2] = -EINTR; |
| regs->psw.addr = continue_addr; |
| } |
| } |
| |
| if (signr > 0) { |
| /* Whee! Actually deliver the signal. */ |
| #ifdef CONFIG_S390_SUPPORT |
| if (test_thread_flag(TIF_31BIT)) { |
| extern void handle_signal32(unsigned long sig, |
| struct k_sigaction *ka, |
| siginfo_t *info, |
| sigset_t *oldset, |
| struct pt_regs *regs); |
| handle_signal32(signr, &ka, &info, oldset, regs); |
| return 1; |
| } |
| #endif |
| handle_signal(signr, &ka, &info, oldset, regs); |
| return 1; |
| } |
| |
| /* Restart a different system call. */ |
| if (retval == -ERESTART_RESTARTBLOCK |
| && regs->psw.addr == continue_addr) { |
| regs->gprs[2] = __NR_restart_syscall; |
| set_thread_flag(TIF_RESTART_SVC); |
| } |
| return 0; |
| } |