| #include "headers.h" |
| |
| |
| |
| #define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00 |
| #define MIPS_CLOCK_REG 0x0f000820 |
| |
| //DDR INIT-133Mhz |
| #define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting |
| {0x0F000800,0x00007212}, |
| {0x0f000820,0x07F13FFF}, |
| {0x0f000810,0x00000F95}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000840,0x0FFF1B00}, |
| {0x0f000870,0x00000002}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| {0x0F00a04C,0x0000000C}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 |
| {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x02000007}, |
| {0x0F007028,0x02020202}, |
| {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a |
| {0x0F007030,0x05000000}, |
| {0x0F007034,0x00000003}, |
| {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 |
| {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018}, |
| {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200}, |
| {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00 |
| {0x0F007048,0x081b0306}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0000001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x0010246c}, |
| {0x0F007064,0x00000010}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00007000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| //# Enable BW improvement within memory controller |
| {0x0F007094,0x00000104}, |
| //# Enable 2 ports within X-bar |
| {0x0F00A000,0x00000016}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| //80Mhz |
| #define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting |
| {0x0f000810,0x00000F95}, |
| {0x0f000820,0x07f1ffff}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| {0x0F00a000,0x00000016}, |
| {0x0F00a04C,0x0000000C}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01000000}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020000}, |
| {0x0F007020,0x04020107}, |
| {0x0F007024,0x00000007}, |
| {0x0F007028,0x02020201}, |
| {0x0F00702c,0x0204040a}, |
| {0x0F007030,0x04000000}, |
| {0x0F007034,0x00000002}, |
| {0x0F007038,0x1F060200}, |
| {0x0F00703C,0x1C22221F}, |
| {0x0F007040,0x8A006600}, |
| {0x0F007044,0x221a0800}, |
| {0x0F007048,0x02690204}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0000001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x000A15D6}, |
| {0x0F007064,0x0000000A}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00004000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| {0x0F007094,0x00000104}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| //100Mhz |
| #define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting |
| {0x0F000800,0x00007008}, |
| {0x0f000810,0x00000F95}, |
| {0x0f000820,0x07F13E3F}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| //0x0f000840,0x0FFF1800, |
| {0x0f000840,0x0FFF1B00}, |
| {0x0f000870,0x00000002}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| {0x0F00a04C,0x0000000C}, |
| //# Enable 2 ports within X-bar |
| {0x0F00A000,0x00000016}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000 |
| {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x00000007}, |
| {0x0F007028,0x01020201}, |
| {0x0F00702c,0x0204040A}, |
| {0x0F007030,0x06000000}, |
| {0x0F007034,0x00000004}, |
| {0x0F007038,0x20080200}, |
| {0x0F00703C,0x02030320}, |
| {0x0F007040,0x6E7F1200}, |
| {0x0F007044,0x01190A00}, |
| {0x0F007048,0x06120305},//0x02690204 // 0x06120305 |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0000001C}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x00082ED6}, |
| {0x0F007064,0x0000000A}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00005000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| //# Enable BW improvement within memory controller |
| {0x0F007094,0x00000104}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| //Net T3B DDR Settings |
| //DDR INIT-133Mhz |
| static struct bcm_ddr_setting asDPLL_266MHZ[] = { |
| {0x0F000800,0x00007212}, |
| {0x0f000820,0x07F13FFF}, |
| {0x0f000810,0x00000F95}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000840,0x0FFF1B00}, |
| {0x0f000870,0x00000002} |
| }; |
| |
| #define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting |
| {0x0f000810,0x00000F95}, |
| {0x0f000810,0x00000F95}, |
| {0x0f000810,0x00000F95}, |
| {0x0f000820,0x07F13652}, |
| {0x0f000840,0x0FFF0800}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000880,0x000003DD}, |
| {0x0f000860,0x00000000}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| //# Enable 2 ports within X-bar |
| {0x0F00A000,0x00000016}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 |
| {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x02000007}, |
| {0x0F007028,0x02020202}, |
| {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a |
| {0x0F007030,0x05000000}, |
| {0x0F007034,0x00000003}, |
| {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 |
| {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018}, |
| {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200}, |
| {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00 |
| {0x0F007048,0x040D0306}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0000001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x0010246c}, |
| {0x0F007064,0x00000012}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00007000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| //# Enable BW improvement within memory controller |
| {0x0F007094,0x00000104}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000}, |
| }; |
| |
| #define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting |
| {0x0f000810,0x00000F95}, |
| {0x0f000820,0x07F13FFF}, |
| {0x0f000840,0x0FFF1F00}, |
| {0x0f000880,0x000003DD}, |
| {0x0f000860,0x00000000}, |
| |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| {0x0F00a000,0x00000016}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01000000}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020000}, |
| {0x0F007020,0x04020107}, |
| {0x0F007024,0x00000007}, |
| {0x0F007028,0x02020201}, |
| {0x0F00702c,0x0204040a}, |
| {0x0F007030,0x04000000}, |
| {0x0F007034,0x02000002}, |
| {0x0F007038,0x1F060202}, |
| {0x0F00703C,0x1C22221F}, |
| {0x0F007040,0x8A006600}, |
| {0x0F007044,0x221a0800}, |
| {0x0F007048,0x02690204}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0100001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x000A15D6}, |
| {0x0F007064,0x0000000A}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00004000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| {0x0F007094,0x00000104}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| //100Mhz |
| #define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting |
| {0x0f000810,0x00000F95}, |
| {0x0f000820,0x07F1369B}, |
| {0x0f000840,0x0FFF0800}, |
| {0x0f000880,0x000003DD}, |
| {0x0f000860,0x00000000}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| //# Enable 2 ports within X-bar |
| {0x0F00A000,0x00000016}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020000}, // POP - 0x00020000 Normal 0x01020000 |
| {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x00000007}, |
| {0x0F007028,0x01020201}, |
| {0x0F00702c,0x0204040A}, |
| {0x0F007030,0x06000000}, |
| {0x0F007034,0x02000004}, |
| {0x0F007038,0x20080200}, |
| {0x0F00703C,0x02030320}, |
| {0x0F007040,0x6E7F1200}, |
| {0x0F007044,0x01190A00}, |
| {0x0F007048,0x06120305},//0x02690204 // 0x06120305 |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0100001C}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x00082ED6}, |
| {0x0F007064,0x0000000A}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00005000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| //# Enable BW improvement within memory controller |
| {0x0F007094,0x00000104}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| |
| #define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Setting |
| {0x0f000820,0x03F1365B}, |
| {0x0f000810,0x00002F95}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000840,0x0FFF0000}, |
| {0x0f000860,0x00000000}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| {0x0F00A000,0x00000016}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 |
| {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x02000007}, |
| {0x0F007028,0x02020200}, |
| {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a |
| {0x0F007030,0x05000000}, |
| {0x0F007034,0x00000003}, |
| {0x0F007038,0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 |
| {0x0F00703C,0x02101020},//ROB - 0x02101010,//0x02101018, |
| {0x0F007040,0x45711200},//ROB - 0x45751200,//0x450f1200, |
| {0x0F007044,0x110D0D00},//ROB - 0x110a0d00//0x111f0d00 |
| {0x0F007048,0x04080306}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0100001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x0010245F}, |
| {0x0F007064,0x00000010}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00007000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| {0x0F007088,0x01000001}, |
| {0x0F00708c,0x00000101}, |
| {0x0F007090,0x00000000}, |
| //# Enable BW improvement within memory controller |
| {0x0F007094,0x00040000}, |
| {0x0F007098,0x00000000}, |
| {0x0F0070c8,0x00000104}, |
| //# Enable 2 ports within X-bar |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| #define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Setting |
| {0x0f000810,0x00002F95}, |
| {0x0f000820,0x03F1369B}, |
| {0x0f000840,0x0fff0000}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000840,0x0FFF0000}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001 |
| {0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x00000007}, |
| {0x0F007028,0x01020200}, |
| {0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a |
| {0x0F007030,0x06000000}, |
| {0x0F007034,0x00000004}, |
| {0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 |
| {0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018, |
| {0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200, |
| {0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00 |
| {0x0F007048,0x03000305}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0100001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x00082ED6}, |
| {0x0F007064,0x0000000A}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00005000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| {0x0F007088,0x01000001}, |
| {0x0F00708c,0x00000101}, |
| {0x0F007090,0x00000000}, |
| {0x0F007094,0x00010000}, |
| {0x0F007098,0x00000000}, |
| {0x0F0070C8,0x00000104}, |
| //# Enable 2 ports within X-bar |
| {0x0F00A000,0x00000016}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| #define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting |
| {0x0f000820,0x07F13FFF}, |
| {0x0f000810,0x00002F95}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| {0x0f000840,0x0FFF1F00}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0F00a084,0x1Cffffff}, |
| {0x0F00a080,0x1C000000}, |
| {0x0F00A000,0x00000016}, |
| {0x0f007000,0x00010001}, |
| {0x0f007004,0x01000000}, |
| {0x0f007008,0x01000001}, |
| {0x0f00700c,0x00000000}, |
| {0x0f007010,0x01000000}, |
| {0x0f007014,0x01000100}, |
| {0x0f007018,0x01000000}, |
| {0x0f00701c,0x01020000}, |
| {0x0f007020,0x04020107}, |
| {0x0f007024,0x00000007}, |
| {0x0f007028,0x02020200}, |
| {0x0f00702c,0x0204040a}, |
| {0x0f007030,0x04000000}, |
| {0x0f007034,0x00000002}, |
| {0x0f007038,0x1d060200}, |
| {0x0f00703c,0x1c22221d}, |
| {0x0f007040,0x8A116600}, |
| {0x0f007044,0x222d0800}, |
| {0x0f007048,0x02690204}, |
| {0x0f00704c,0x00000000}, |
| {0x0f007050,0x0100001c}, |
| {0x0f007054,0x00000000}, |
| {0x0f007058,0x00000000}, |
| {0x0f00705c,0x00000000}, |
| {0x0f007060,0x000A15D6}, |
| {0x0f007064,0x0000000A}, |
| {0x0f007068,0x00000000}, |
| {0x0f00706c,0x00000001}, |
| {0x0f007070,0x00004000}, |
| {0x0f007074,0x00000000}, |
| {0x0f007078,0x00000000}, |
| {0x0f00707c,0x00000000}, |
| {0x0f007080,0x00000000}, |
| {0x0f007084,0x00000000}, |
| {0x0f007088,0x01000001}, |
| {0x0f00708c,0x00000101}, |
| {0x0f007090,0x00000000}, |
| {0x0f007094,0x00010000}, |
| {0x0f007098,0x00000000}, |
| {0x0F0070C8,0x00000104}, |
| {0x0F007018,0x01010000} |
| }; |
| |
| |
| |
| |
| ///T3 LP-B (UMA-B) |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setting |
| |
| {0x0f000820,0x03F137DB}, |
| {0x0f000810,0x01842795}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| {0x0f000840,0x0FFF0400}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0f003050,0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz |
| {0x0F00a084,0x1Cffffff},//Now dump from her in internal memory |
| {0x0F00a080,0x1C000000}, |
| {0x0F00A000,0x00000016}, |
| {0x0f007000,0x00010001}, |
| {0x0f007004,0x01000001}, |
| {0x0f007008,0x01000101}, |
| {0x0f00700c,0x00000000}, |
| {0x0f007010,0x01000100}, |
| {0x0f007014,0x01000100}, |
| {0x0f007018,0x01000000}, |
| {0x0f00701c,0x01020000}, |
| {0x0f007020,0x04030107}, |
| {0x0f007024,0x02000007}, |
| {0x0f007028,0x02020200}, |
| {0x0f00702c,0x0206060a}, |
| {0x0f007030,0x050d0d00}, |
| {0x0f007034,0x00000003}, |
| {0x0f007038,0x170a0200}, |
| {0x0f00703c,0x02101012}, |
| {0x0f007040,0x45161200}, |
| {0x0f007044,0x11250c00}, |
| {0x0f007048,0x04da0307}, |
| {0x0f00704c,0x00000000}, |
| {0x0f007050,0x0000001c}, |
| {0x0f007054,0x00000000}, |
| {0x0f007058,0x00000000}, |
| {0x0f00705c,0x00000000}, |
| {0x0f007060,0x00142bb6}, |
| {0x0f007064,0x20430014}, |
| {0x0f007068,0x00000000}, |
| {0x0f00706c,0x00000001}, |
| {0x0f007070,0x00009000}, |
| {0x0f007074,0x00000000}, |
| {0x0f007078,0x00000000}, |
| {0x0f00707c,0x00000000}, |
| {0x0f007080,0x00000000}, |
| {0x0f007084,0x00000000}, |
| {0x0f007088,0x01000001}, |
| {0x0f00708c,0x00000101}, |
| {0x0f007090,0x00000000}, |
| {0x0f007094,0x00040000}, |
| {0x0f007098,0x00000000}, |
| {0x0F0070C8,0x00000104}, |
| {0x0F007018,0x01010000} |
| }; |
| |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setting |
| {0x0f000820,0x03F1365B}, |
| {0x0f000810,0x00002F95}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000840,0x0FFF0000}, |
| {0x0f000860,0x00000000}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz |
| {0x0F00a084,0x1Cffffff},//dump from here in internal memory |
| {0x0F00a080,0x1C000000}, |
| {0x0F00A000,0x00000016}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001 |
| {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x02000007}, |
| {0x0F007028,0x02020200}, |
| {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a |
| {0x0F007030,0x05000000}, |
| {0x0F007034,0x00000003}, |
| {0x0F007038,0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 |
| {0x0F00703C,0x02101017},//ROB - 0x02101010,//0x02101018, |
| {0x0F007040,0x45171200},//ROB - 0x45751200,//0x450f1200, |
| {0x0F007044,0x11290D00},//ROB - 0x110a0d00//0x111f0d00 |
| {0x0F007048,0x04080306}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0100001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x0010245F}, |
| {0x0F007064,0x00000010}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00007000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| {0x0F007088,0x01000001}, |
| {0x0F00708c,0x00000101}, |
| {0x0F007090,0x00000000}, |
| //# Enable BW improvement within memory controller |
| {0x0F007094,0x00040000}, |
| {0x0F007098,0x00000000}, |
| {0x0F0070c8,0x00000104}, |
| //# Enable 2 ports within X-bar |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setting |
| {0x0f000810,0x00002F95}, |
| {0x0f000820,0x03F1369B}, |
| {0x0f000840,0x0fff0000}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| // Changed source for X-bar and MIPS clock to APLL |
| {0x0f000840,0x0FFF0000}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz |
| {0x0F00a084,0x1Cffffff}, //dump from here in internal memory |
| {0x0F00a080,0x1C000000}, |
| //Memcontroller Default values |
| {0x0F007000,0x00010001}, |
| {0x0F007004,0x01010100}, |
| {0x0F007008,0x01000001}, |
| {0x0F00700c,0x00000000}, |
| {0x0F007010,0x01000000}, |
| {0x0F007014,0x01000100}, |
| {0x0F007018,0x01000000}, |
| {0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001 |
| {0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107 |
| {0x0F007024,0x00000007}, |
| {0x0F007028,0x01020200}, |
| {0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a |
| {0x0F007030,0x06000000}, |
| {0x0F007034,0x00000004}, |
| {0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 |
| {0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018, |
| {0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200, |
| {0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00 |
| {0x0F007048,0x03000305}, |
| {0x0F00704c,0x00000000}, |
| {0x0F007050,0x0100001c}, |
| {0x0F007054,0x00000000}, |
| {0x0F007058,0x00000000}, |
| {0x0F00705c,0x00000000}, |
| {0x0F007060,0x00082ED6}, |
| {0x0F007064,0x0000000A}, |
| {0x0F007068,0x00000000}, |
| {0x0F00706c,0x00000001}, |
| {0x0F007070,0x00005000}, |
| {0x0F007074,0x00000000}, |
| {0x0F007078,0x00000000}, |
| {0x0F00707C,0x00000000}, |
| {0x0F007080,0x00000000}, |
| {0x0F007084,0x00000000}, |
| {0x0F007088,0x01000001}, |
| {0x0F00708c,0x00000101}, |
| {0x0F007090,0x00000000}, |
| {0x0F007094,0x00010000}, |
| {0x0F007098,0x00000000}, |
| {0x0F0070C8,0x00000104}, |
| //# Enable 2 ports within X-bar |
| {0x0F00A000,0x00000016}, |
| //# Enable start bit within memory controller |
| {0x0F007018,0x01010000} |
| }; |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000 |
| static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Setting |
| {0x0f000820,0x07F13FFF}, |
| {0x0f000810,0x00002F95}, |
| {0x0f000860,0x00000000}, |
| {0x0f000880,0x000003DD}, |
| {0x0f000840,0x0FFF1F00}, |
| {0x0F00a044,0x1fffffff}, |
| {0x0F00a040,0x1f000000}, |
| {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz |
| {0x0F00a084,0x1Cffffff},// dump from here in internal memory |
| {0x0F00a080,0x1C000000}, |
| {0x0F00A000,0x00000016}, |
| {0x0f007000,0x00010001}, |
| {0x0f007004,0x01000000}, |
| {0x0f007008,0x01000001}, |
| {0x0f00700c,0x00000000}, |
| {0x0f007010,0x01000000}, |
| {0x0f007014,0x01000100}, |
| {0x0f007018,0x01000000}, |
| {0x0f00701c,0x01020000}, |
| {0x0f007020,0x04020107}, |
| {0x0f007024,0x00000007}, |
| {0x0f007028,0x02020200}, |
| {0x0f00702c,0x0204040a}, |
| {0x0f007030,0x04000000}, |
| {0x0f007034,0x00000002}, |
| {0x0f007038,0x1d060200}, |
| {0x0f00703c,0x1c22221d}, |
| {0x0f007040,0x8A116600}, |
| {0x0f007044,0x222d0800}, |
| {0x0f007048,0x02690204}, |
| {0x0f00704c,0x00000000}, |
| {0x0f007050,0x0100001c}, |
| {0x0f007054,0x00000000}, |
| {0x0f007058,0x00000000}, |
| {0x0f00705c,0x00000000}, |
| {0x0f007060,0x000A15D6}, |
| {0x0f007064,0x0000000A}, |
| {0x0f007068,0x00000000}, |
| {0x0f00706c,0x00000001}, |
| {0x0f007070,0x00004000}, |
| {0x0f007074,0x00000000}, |
| {0x0f007078,0x00000000}, |
| {0x0f00707c,0x00000000}, |
| {0x0f007080,0x00000000}, |
| {0x0f007084,0x00000000}, |
| {0x0f007088,0x01000001}, |
| {0x0f00708c,0x00000101}, |
| {0x0f007090,0x00000000}, |
| {0x0f007094,0x00010000}, |
| {0x0f007098,0x00000000}, |
| {0x0F0070C8,0x00000104}, |
| {0x0F007018,0x01010000} |
| }; |
| |
| |
| int ddr_init(struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ddr_setting *psDDRSetting=NULL; |
| ULONG RegCount=0; |
| UINT value = 0; |
| UINT uiResetValue = 0; |
| UINT uiClockSetting = 0; |
| int retval = STATUS_SUCCESS; |
| |
| switch (Adapter->chip_id) |
| { |
| case 0xbece3200: |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting=asT3LP_DDRSetting80MHz; |
| RegCount=(sizeof(asT3LP_DDRSetting80MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting=asT3LP_DDRSetting100MHz; |
| RegCount=(sizeof(asT3LP_DDRSetting100MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting=asT3LP_DDRSetting133MHz; |
| RegCount=(sizeof(asT3LP_DDRSetting133MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| if(Adapter->bMipsConfig == MIPS_200_MHZ) |
| { |
| uiClockSetting = 0x03F13652; |
| } |
| else |
| { |
| uiClockSetting = 0x03F1365B; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| break; |
| case T3LPB: |
| case BCS220_2: |
| case BCS220_2BC: |
| case BCS250_BC: |
| case BCS220_3 : |
| /* Set bit 2 and bit 6 to 1 for BBIC 2mA drive |
| * (please check current value and additionally set these bits) |
| */ |
| if( (Adapter->chip_id != BCS220_2) && |
| (Adapter->chip_id != BCS220_2BC) && |
| (Adapter->chip_id != BCS220_3) ) |
| { |
| retval= rdmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue |= 0x44; |
| retval = wrmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| } |
| switch(Adapter->DDRSetting) |
| { |
| |
| |
| |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting80MHz; |
| RegCount=(sizeof(asT3B_DDRSetting80MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting=asT3LPB_DDRSetting100MHz; |
| RegCount=(sizeof(asT3B_DDRSetting100MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting133MHz; |
| RegCount=(sizeof(asT3B_DDRSetting133MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| |
| if(Adapter->bMipsConfig == MIPS_200_MHZ) |
| { |
| uiClockSetting = 0x03F13652; |
| } |
| else |
| { |
| uiClockSetting = 0x03F1365B; |
| } |
| break; |
| |
| case DDR_160_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting160MHz; |
| RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(struct bcm_ddr_setting); |
| |
| if(Adapter->bMipsConfig == MIPS_200_MHZ) |
| { |
| uiClockSetting = 0x03F137D2; |
| } |
| else |
| { |
| uiClockSetting = 0x03F137DB; |
| } |
| } |
| break; |
| |
| case 0xbece0110: |
| case 0xbece0120: |
| case 0xbece0121: |
| case 0xbece0130: |
| case 0xbece0300: |
| BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting); |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3_DDRSetting80MHz; |
| RegCount = (sizeof(asT3_DDRSetting80MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3_DDRSetting100MHz; |
| RegCount = (sizeof(asT3_DDRSetting100MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3_DDRSetting133MHz; |
| RegCount = (sizeof(asT3_DDRSetting133MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| case 0xbece0310: |
| { |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3B_DDRSetting80MHz; |
| RegCount=(sizeof(asT3B_DDRSetting80MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting=asT3B_DDRSetting100MHz; |
| RegCount=(sizeof(asT3B_DDRSetting100MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| |
| if(Adapter->bDPLLConfig == PLL_266_MHZ)//266Mhz PLL selected. |
| { |
| memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ, |
| sizeof(asDPLL_266MHZ)); |
| psDDRSetting = asT3B_DDRSetting133MHz; |
| RegCount=(sizeof(asT3B_DDRSetting133MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| } |
| else |
| { |
| psDDRSetting = asT3B_DDRSetting133MHz; |
| RegCount=(sizeof(asT3B_DDRSetting133MHz)/ |
| sizeof(struct bcm_ddr_setting)); |
| if(Adapter->bMipsConfig == MIPS_200_MHZ) |
| { |
| uiClockSetting = 0x07F13652; |
| } |
| else |
| { |
| uiClockSetting = 0x07F1365B; |
| } |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| value=0; |
| BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Register Count is =%lu\n", RegCount); |
| while(RegCount && !retval) |
| { |
| if(uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG) |
| { |
| value = uiClockSetting; |
| } |
| else |
| { |
| value = psDDRSetting->ulRegValue; |
| } |
| retval = wrmalt(Adapter, psDDRSetting->ulRegAddress, &value, sizeof(value)); |
| if(STATUS_SUCCESS != retval) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); |
| break; |
| } |
| |
| RegCount--; |
| psDDRSetting++; |
| } |
| |
| if(Adapter->chip_id >= 0xbece3300 ) |
| { |
| |
| mdelay(3); |
| if( (Adapter->chip_id != BCS220_2)&& |
| (Adapter->chip_id != BCS220_2BC)&& |
| (Adapter->chip_id != BCS220_3)) |
| { |
| /* drive MDDR to half in case of UMA-B: */ |
| uiResetValue = 0x01010001; |
| retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x00040020; |
| retval = wrmalt(Adapter, (UINT)0x0F007094, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x01020101; |
| retval = wrmalt(Adapter, (UINT)0x0F00701c, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x01010000; |
| retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| } |
| mdelay(3); |
| |
| /* DC/DC standby change... |
| * This is to be done only for Hybrid PMU mode. |
| * with the current h/w there is no way to detect this. |
| * and since we dont have internal PMU lets do it under UMA-B chip id. |
| * we will change this when we will have internal PMU. |
| */ |
| if(Adapter->PmuMode == HYBRID_MODE_7C) |
| { |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x1322a8; |
| retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x132296; |
| retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| } |
| else if(Adapter->PmuMode == HYBRID_MODE_6 ) |
| { |
| |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x6003229a; |
| retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x1322a8; |
| retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue)); |
| if(retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__); |
| return retval; |
| } |
| } |
| |
| } |
| Adapter->bDDRInitDone = TRUE; |
| return retval; |
| } |
| |
| int download_ddr_settings(struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ddr_setting *psDDRSetting=NULL; |
| ULONG RegCount=0; |
| unsigned long ul_ddr_setting_load_addr = DDR_DUMP_INTERNAL_DEVICE_MEMORY; |
| UINT value = 0; |
| int retval = STATUS_SUCCESS; |
| bool bOverrideSelfRefresh = false; |
| |
| switch (Adapter->chip_id) |
| { |
| case 0xbece3200: |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LP_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz); |
| RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; |
| psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3LP_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz); |
| RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; |
| psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3LP_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz); |
| RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; |
| psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| case T3LPB: |
| case BCS220_2: |
| case BCS220_2BC: |
| case BCS250_BC: |
| case BCS220_3 : |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting80MHz; |
| RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3LPB_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| |
| case DDR_160_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3LPB_DDRSetting160MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case 0xbece0300: |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz); |
| RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; |
| psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz); |
| RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; |
| psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz); |
| RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; |
| psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case 0xbece0310: |
| { |
| switch (Adapter->DDRSetting) |
| { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3B_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz); |
| RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; |
| psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3B_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz); |
| RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; |
| psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3B_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz); |
| RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; |
| psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| } |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| //total number of Register that has to be dumped |
| value =RegCount ; |
| retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); |
| if(retval) |
| { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); |
| |
| return retval; |
| } |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| /*signature */ |
| value =(0x1d1e0dd0); |
| retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); |
| if(retval) |
| { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); |
| return retval; |
| } |
| |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| RegCount*=(sizeof(struct bcm_ddr_setting)/sizeof(ULONG)); |
| |
| while(RegCount && !retval) |
| { |
| value = psDDRSetting->ulRegAddress ; |
| retval = wrmalt( Adapter, ul_ddr_setting_load_addr, &value, sizeof(value)); |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| if(!retval) |
| { |
| if(bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018)) |
| { |
| value = (psDDRSetting->ulRegValue |(1<<8)); |
| if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr, |
| &value, sizeof(value))){ |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); |
| break; |
| } |
| } |
| else |
| { |
| value = psDDRSetting->ulRegValue; |
| |
| if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr , |
| &value, sizeof(value))){ |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__); |
| break; |
| } |
| } |
| } |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| RegCount--; |
| psDDRSetting++; |
| } |
| return retval; |
| } |
| |
| |
