| /* |
| * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III |
| * |
| * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de> |
| * |
| * based on the skystar2-driver |
| * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc |
| * |
| * Acknowledgements: |
| * John Jurrius from BBTI, Inc. for extensive support with |
| * code examples and data books |
| * |
| * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) |
| * |
| * Contributions to the skystar2-driver have been done by |
| * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) |
| * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) |
| * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering) |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public License |
| * as published by the Free Software Foundation; either version 2.1 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include "flexcop.h" |
| |
| #define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" |
| #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de" |
| |
| #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG |
| #define DEBSTATUS "" |
| #else |
| #define DEBSTATUS " (debugging is not enabled)" |
| #endif |
| |
| int b2c2_flexcop_debug; |
| module_param_named(debug, b2c2_flexcop_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); |
| #undef DEBSTATUS |
| |
| /* global zero for ibi values */ |
| flexcop_ibi_value ibi_zero; |
| |
| static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct flexcop_device *fc = dvbdmxfeed->demux->priv; |
| return flexcop_pid_feed_control(fc,dvbdmxfeed,1); |
| } |
| |
| static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct flexcop_device *fc = dvbdmxfeed->demux->priv; |
| return flexcop_pid_feed_control(fc,dvbdmxfeed,0); |
| } |
| |
| static int flexcop_dvb_init(struct flexcop_device *fc) |
| { |
| int ret; |
| if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner,fc->dev)) < 0) { |
| err("error registering DVB adapter"); |
| return ret; |
| } |
| fc->dvb_adapter.priv = fc; |
| |
| fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); |
| fc->demux.priv = fc; |
| |
| fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; |
| |
| fc->demux.start_feed = flexcop_dvb_start_feed; |
| fc->demux.stop_feed = flexcop_dvb_stop_feed; |
| fc->demux.write_to_decoder = NULL; |
| |
| if ((ret = dvb_dmx_init(&fc->demux)) < 0) { |
| err("dvb_dmx failed: error %d",ret); |
| goto err_dmx; |
| } |
| |
| fc->hw_frontend.source = DMX_FRONTEND_0; |
| |
| fc->dmxdev.filternum = fc->demux.feednum; |
| fc->dmxdev.demux = &fc->demux.dmx; |
| fc->dmxdev.capabilities = 0; |
| if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) { |
| err("dvb_dmxdev_init failed: error %d",ret); |
| goto err_dmx_dev; |
| } |
| |
| if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { |
| err("adding hw_frontend to dmx failed: error %d",ret); |
| goto err_dmx_add_hw_frontend; |
| } |
| |
| fc->mem_frontend.source = DMX_MEMORY_FE; |
| if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) { |
| err("adding mem_frontend to dmx failed: error %d",ret); |
| goto err_dmx_add_mem_frontend; |
| } |
| |
| if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { |
| err("connect frontend failed: error %d",ret); |
| goto err_connect_frontend; |
| } |
| |
| dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); |
| |
| fc->init_state |= FC_STATE_DVB_INIT; |
| return 0; |
| |
| err_connect_frontend: |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); |
| err_dmx_add_mem_frontend: |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); |
| err_dmx_add_hw_frontend: |
| dvb_dmxdev_release(&fc->dmxdev); |
| err_dmx_dev: |
| dvb_dmx_release(&fc->demux); |
| err_dmx: |
| dvb_unregister_adapter(&fc->dvb_adapter); |
| return ret; |
| } |
| |
| static void flexcop_dvb_exit(struct flexcop_device *fc) |
| { |
| if (fc->init_state & FC_STATE_DVB_INIT) { |
| dvb_net_release(&fc->dvbnet); |
| |
| fc->demux.dmx.close(&fc->demux.dmx); |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); |
| dvb_dmxdev_release(&fc->dmxdev); |
| dvb_dmx_release(&fc->demux); |
| dvb_unregister_adapter(&fc->dvb_adapter); |
| |
| deb_info("deinitialized dvb stuff\n"); |
| } |
| fc->init_state &= ~FC_STATE_DVB_INIT; |
| } |
| |
| /* these methods are necessary to achieve the long-term-goal of hiding the |
| * struct flexcop_device from the bus-parts */ |
| void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) |
| { |
| dvb_dmx_swfilter(&fc->demux, buf, len); |
| } |
| EXPORT_SYMBOL(flexcop_pass_dmx_data); |
| |
| void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) |
| { |
| dvb_dmx_swfilter_packets(&fc->demux, buf, no); |
| } |
| EXPORT_SYMBOL(flexcop_pass_dmx_packets); |
| |
| static void flexcop_reset(struct flexcop_device *fc) |
| { |
| flexcop_ibi_value v210,v204; |
| |
| /* reset the flexcop itself */ |
| fc->write_ibi_reg(fc,ctrl_208,ibi_zero); |
| |
| v210.raw = 0; |
| v210.sw_reset_210.reset_block_000 = 1; |
| v210.sw_reset_210.reset_block_100 = 1; |
| v210.sw_reset_210.reset_block_200 = 1; |
| v210.sw_reset_210.reset_block_300 = 1; |
| v210.sw_reset_210.reset_block_400 = 1; |
| v210.sw_reset_210.reset_block_500 = 1; |
| v210.sw_reset_210.reset_block_600 = 1; |
| v210.sw_reset_210.reset_block_700 = 1; |
| v210.sw_reset_210.Block_reset_enable = 0xb2; |
| |
| v210.sw_reset_210.Special_controls = 0xc259; |
| |
| fc->write_ibi_reg(fc,sw_reset_210,v210); |
| msleep(1); |
| |
| /* reset the periphical devices */ |
| |
| v204 = fc->read_ibi_reg(fc,misc_204); |
| v204.misc_204.Per_reset_sig = 0; |
| fc->write_ibi_reg(fc,misc_204,v204); |
| msleep(1); |
| v204.misc_204.Per_reset_sig = 1; |
| fc->write_ibi_reg(fc,misc_204,v204); |
| } |
| |
| void flexcop_reset_block_300(struct flexcop_device *fc) |
| { |
| flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208), |
| v210 = fc->read_ibi_reg(fc,sw_reset_210); |
| |
| deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw); |
| |
| fc->write_ibi_reg(fc,ctrl_208,ibi_zero); |
| |
| v210.sw_reset_210.reset_block_300 = 1; |
| v210.sw_reset_210.Block_reset_enable = 0xb2; |
| |
| fc->write_ibi_reg(fc,sw_reset_210,v210); |
| msleep(1); |
| |
| fc->write_ibi_reg(fc,ctrl_208,v208_save); |
| } |
| |
| struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) |
| { |
| void *bus; |
| struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), GFP_KERNEL); |
| if (!fc) { |
| err("no memory"); |
| return NULL; |
| } |
| |
| bus = kzalloc(bus_specific_len, GFP_KERNEL); |
| if (!bus) { |
| err("no memory"); |
| kfree(fc); |
| return NULL; |
| } |
| |
| fc->bus_specific = bus; |
| |
| return fc; |
| } |
| EXPORT_SYMBOL(flexcop_device_kmalloc); |
| |
| void flexcop_device_kfree(struct flexcop_device *fc) |
| { |
| kfree(fc->bus_specific); |
| kfree(fc); |
| } |
| EXPORT_SYMBOL(flexcop_device_kfree); |
| |
| int flexcop_device_initialize(struct flexcop_device *fc) |
| { |
| int ret; |
| ibi_zero.raw = 0; |
| |
| flexcop_reset(fc); |
| flexcop_determine_revision(fc); |
| flexcop_sram_init(fc); |
| flexcop_hw_filter_init(fc); |
| |
| flexcop_smc_ctrl(fc, 0); |
| |
| if ((ret = flexcop_dvb_init(fc))) |
| goto error; |
| |
| /* do the MAC address reading after initializing the dvb_adapter */ |
| if (fc->get_mac_addr(fc, 0) == 0) { |
| u8 *b = fc->dvb_adapter.proposed_mac; |
| info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]); |
| flexcop_set_mac_filter(fc,b); |
| flexcop_mac_filter_ctrl(fc,1); |
| } else |
| warn("reading of MAC address failed.\n"); |
| |
| |
| if ((ret = flexcop_i2c_init(fc))) |
| goto error; |
| |
| if ((ret = flexcop_frontend_init(fc))) |
| goto error; |
| |
| flexcop_device_name(fc,"initialization of","complete"); |
| |
| return 0; |
| |
| error: |
| flexcop_device_exit(fc); |
| return ret; |
| } |
| EXPORT_SYMBOL(flexcop_device_initialize); |
| |
| void flexcop_device_exit(struct flexcop_device *fc) |
| { |
| flexcop_frontend_exit(fc); |
| flexcop_i2c_exit(fc); |
| flexcop_dvb_exit(fc); |
| } |
| EXPORT_SYMBOL(flexcop_device_exit); |
| |
| static int flexcop_module_init(void) |
| { |
| info(DRIVER_NAME " loaded successfully"); |
| return 0; |
| } |
| |
| static void flexcop_module_cleanup(void) |
| { |
| info(DRIVER_NAME " unloaded successfully"); |
| } |
| |
| module_init(flexcop_module_init); |
| module_exit(flexcop_module_cleanup); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_NAME); |
| MODULE_LICENSE("GPL"); |