| /* |
| * Watchdog driver for IMX2 and later processors |
| * |
| * Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de> |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| * |
| * some parts adapted by similar drivers from Darius Augulis and Vladimir |
| * Zapolskiy, additional improvements by Wim Van Sebroeck. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * NOTE: MX1 has a slightly different Watchdog than MX2 and later: |
| * |
| * MX1: MX2+: |
| * ---- ----- |
| * Registers: 32-bit 16-bit |
| * Stopable timer: Yes No |
| * Need to enable clk: No Yes |
| * Halt on suspend: Manual Can be automatic |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/timer.h> |
| #include <linux/watchdog.h> |
| |
| #define DRIVER_NAME "imx2-wdt" |
| |
| #define IMX2_WDT_WCR 0x00 /* Control Register */ |
| #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ |
| #define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ |
| #define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ |
| #define IMX2_WDT_WCR_WDZST (1 << 0) /* -> Watchdog timer Suspend */ |
| |
| #define IMX2_WDT_WSR 0x02 /* Service Register */ |
| #define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */ |
| #define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */ |
| |
| #define IMX2_WDT_WRSR 0x04 /* Reset Status Register */ |
| #define IMX2_WDT_WRSR_TOUT (1 << 1) /* -> Reset due to Timeout */ |
| |
| #define IMX2_WDT_MAX_TIME 128 |
| #define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */ |
| |
| #define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8) |
| |
| struct imx2_wdt_device { |
| struct clk *clk; |
| struct regmap *regmap; |
| struct timer_list timer; /* Pings the watchdog when closed */ |
| struct watchdog_device wdog; |
| }; |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| |
| static unsigned timeout = IMX2_WDT_DEFAULT_TIME; |
| module_param(timeout, uint, 0); |
| MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" |
| __MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")"); |
| |
| static const struct watchdog_info imx2_wdt_info = { |
| .identity = "imx2+ watchdog", |
| .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, |
| }; |
| |
| static inline void imx2_wdt_setup(struct watchdog_device *wdog) |
| { |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| u32 val; |
| |
| regmap_read(wdev->regmap, IMX2_WDT_WCR, &val); |
| |
| /* Suspend timer in low power mode, write once-only */ |
| val |= IMX2_WDT_WCR_WDZST; |
| /* Strip the old watchdog Time-Out value */ |
| val &= ~IMX2_WDT_WCR_WT; |
| /* Generate reset if WDOG times out */ |
| val &= ~IMX2_WDT_WCR_WRE; |
| /* Keep Watchdog Disabled */ |
| val &= ~IMX2_WDT_WCR_WDE; |
| /* Set the watchdog's Time-Out value */ |
| val |= WDOG_SEC_TO_COUNT(wdog->timeout); |
| |
| regmap_write(wdev->regmap, IMX2_WDT_WCR, val); |
| |
| /* enable the watchdog */ |
| val |= IMX2_WDT_WCR_WDE; |
| regmap_write(wdev->regmap, IMX2_WDT_WCR, val); |
| } |
| |
| static inline bool imx2_wdt_is_running(struct imx2_wdt_device *wdev) |
| { |
| u32 val; |
| |
| regmap_read(wdev->regmap, IMX2_WDT_WCR, &val); |
| |
| return val & IMX2_WDT_WCR_WDE; |
| } |
| |
| static int imx2_wdt_ping(struct watchdog_device *wdog) |
| { |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ1); |
| regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ2); |
| return 0; |
| } |
| |
| static void imx2_wdt_timer_ping(unsigned long arg) |
| { |
| struct watchdog_device *wdog = (struct watchdog_device *)arg; |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| /* ping it every wdog->timeout / 2 seconds to prevent reboot */ |
| imx2_wdt_ping(wdog); |
| mod_timer(&wdev->timer, jiffies + wdog->timeout * HZ / 2); |
| } |
| |
| static int imx2_wdt_set_timeout(struct watchdog_device *wdog, |
| unsigned int new_timeout) |
| { |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT, |
| WDOG_SEC_TO_COUNT(new_timeout)); |
| return 0; |
| } |
| |
| static int imx2_wdt_start(struct watchdog_device *wdog) |
| { |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| if (imx2_wdt_is_running(wdev)) { |
| /* delete the timer that pings the watchdog after close */ |
| del_timer_sync(&wdev->timer); |
| imx2_wdt_set_timeout(wdog, wdog->timeout); |
| } else |
| imx2_wdt_setup(wdog); |
| |
| return imx2_wdt_ping(wdog); |
| } |
| |
| static int imx2_wdt_stop(struct watchdog_device *wdog) |
| { |
| /* |
| * We don't need a clk_disable, it cannot be disabled once started. |
| * We use a timer to ping the watchdog while /dev/watchdog is closed |
| */ |
| imx2_wdt_timer_ping((unsigned long)wdog); |
| return 0; |
| } |
| |
| static inline void imx2_wdt_ping_if_active(struct watchdog_device *wdog) |
| { |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| if (imx2_wdt_is_running(wdev)) { |
| imx2_wdt_set_timeout(wdog, wdog->timeout); |
| imx2_wdt_timer_ping((unsigned long)wdog); |
| } |
| } |
| |
| static struct watchdog_ops imx2_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = imx2_wdt_start, |
| .stop = imx2_wdt_stop, |
| .ping = imx2_wdt_ping, |
| .set_timeout = imx2_wdt_set_timeout, |
| }; |
| |
| static struct regmap_config imx2_wdt_regmap_config = { |
| .reg_bits = 16, |
| .reg_stride = 2, |
| .val_bits = 16, |
| .max_register = 0x8, |
| }; |
| |
| static int __init imx2_wdt_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct imx2_wdt_device *wdev; |
| struct watchdog_device *wdog; |
| struct resource *res; |
| void __iomem *base; |
| bool big_endian; |
| int ret; |
| u32 val; |
| |
| wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL); |
| if (!wdev) |
| return -ENOMEM; |
| |
| big_endian = of_property_read_bool(np, "big-endian"); |
| if (big_endian) |
| imx2_wdt_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| wdev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base, |
| &imx2_wdt_regmap_config); |
| if (IS_ERR(wdev->regmap)) { |
| dev_err(&pdev->dev, "regmap init failed\n"); |
| return PTR_ERR(wdev->regmap); |
| } |
| |
| wdev->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(wdev->clk)) { |
| dev_err(&pdev->dev, "can't get Watchdog clock\n"); |
| return PTR_ERR(wdev->clk); |
| } |
| |
| wdog = &wdev->wdog; |
| wdog->info = &imx2_wdt_info; |
| wdog->ops = &imx2_wdt_ops; |
| wdog->min_timeout = 1; |
| wdog->max_timeout = IMX2_WDT_MAX_TIME; |
| |
| clk_prepare_enable(wdev->clk); |
| |
| regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val); |
| wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0; |
| |
| wdog->timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); |
| if (wdog->timeout != timeout) |
| dev_warn(&pdev->dev, "Initial timeout out of range! Clamped from %u to %u\n", |
| timeout, wdog->timeout); |
| |
| platform_set_drvdata(pdev, wdog); |
| watchdog_set_drvdata(wdog, wdev); |
| watchdog_set_nowayout(wdog, nowayout); |
| watchdog_init_timeout(wdog, timeout, &pdev->dev); |
| |
| setup_timer(&wdev->timer, imx2_wdt_timer_ping, (unsigned long)wdog); |
| |
| imx2_wdt_ping_if_active(wdog); |
| |
| ret = watchdog_register_device(wdog); |
| if (ret) { |
| dev_err(&pdev->dev, "cannot register watchdog device\n"); |
| return ret; |
| } |
| |
| dev_info(&pdev->dev, "timeout %d sec (nowayout=%d)\n", |
| wdog->timeout, nowayout); |
| |
| return 0; |
| } |
| |
| static int __exit imx2_wdt_remove(struct platform_device *pdev) |
| { |
| struct watchdog_device *wdog = platform_get_drvdata(pdev); |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| watchdog_unregister_device(wdog); |
| |
| if (imx2_wdt_is_running(wdev)) { |
| del_timer_sync(&wdev->timer); |
| imx2_wdt_ping(wdog); |
| dev_crit(&pdev->dev, "Device removed: Expect reboot!\n"); |
| } |
| return 0; |
| } |
| |
| static void imx2_wdt_shutdown(struct platform_device *pdev) |
| { |
| struct watchdog_device *wdog = platform_get_drvdata(pdev); |
| struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); |
| |
| if (imx2_wdt_is_running(wdev)) { |
| /* |
| * We are running, we need to delete the timer but will |
| * give max timeout before reboot will take place |
| */ |
| del_timer_sync(&wdev->timer); |
| imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); |
| imx2_wdt_ping(wdog); |
| dev_crit(&pdev->dev, "Device shutdown: Expect reboot!\n"); |
| } |
| } |
| |
| static const struct of_device_id imx2_wdt_dt_ids[] = { |
| { .compatible = "fsl,imx21-wdt", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids); |
| |
| static struct platform_driver imx2_wdt_driver = { |
| .remove = __exit_p(imx2_wdt_remove), |
| .shutdown = imx2_wdt_shutdown, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = imx2_wdt_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver_probe(imx2_wdt_driver, imx2_wdt_probe); |
| |
| MODULE_AUTHOR("Wolfram Sang"); |
| MODULE_DESCRIPTION("Watchdog driver for IMX2 and later"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |