| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Driver for USB Mass Storage compliant devices |
| * SCSI layer glue code |
| * |
| * Current development and maintenance by: |
| * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) |
| * |
| * Developed with the assistance of: |
| * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) |
| * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) |
| * |
| * Initial work by: |
| * (c) 1999 Michael Gee (michael@linuxspecific.com) |
| * |
| * This driver is based on the 'USB Mass Storage Class' document. This |
| * describes in detail the protocol used to communicate with such |
| * devices. Clearly, the designers had SCSI and ATAPI commands in |
| * mind when they created this document. The commands are all very |
| * similar to commands in the SCSI-II and ATAPI specifications. |
| * |
| * It is important to note that in a number of cases this class |
| * exhibits class-specific exemptions from the USB specification. |
| * Notably the usage of NAK, STALL and ACK differs from the norm, in |
| * that they are used to communicate wait, failed and OK on commands. |
| * |
| * Also, for certain devices, the interrupt endpoint is used to convey |
| * status of a command. |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_devinfo.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_eh.h> |
| |
| #include "usb.h" |
| #include <linux/usb/hcd.h> |
| #include "scsiglue.h" |
| #include "debug.h" |
| #include "transport.h" |
| #include "protocol.h" |
| |
| /* |
| * Vendor IDs for companies that seem to include the READ CAPACITY bug |
| * in all their devices |
| */ |
| #define VENDOR_ID_NOKIA 0x0421 |
| #define VENDOR_ID_NIKON 0x04b0 |
| #define VENDOR_ID_PENTAX 0x0a17 |
| #define VENDOR_ID_MOTOROLA 0x22b8 |
| |
| /*********************************************************************** |
| * Host functions |
| ***********************************************************************/ |
| |
| static const char* host_info(struct Scsi_Host *host) |
| { |
| struct us_data *us = host_to_us(host); |
| return us->scsi_name; |
| } |
| |
| static int slave_alloc (struct scsi_device *sdev) |
| { |
| struct us_data *us = host_to_us(sdev->host); |
| |
| /* |
| * Set the INQUIRY transfer length to 36. We don't use any of |
| * the extra data and many devices choke if asked for more or |
| * less than 36 bytes. |
| */ |
| sdev->inquiry_len = 36; |
| |
| /* |
| * Some host controllers may have alignment requirements. |
| * We'll play it safe by requiring 512-byte alignment always. |
| */ |
| blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); |
| |
| /* Tell the SCSI layer if we know there is more than one LUN */ |
| if (us->protocol == USB_PR_BULK && us->max_lun > 0) |
| sdev->sdev_bflags |= BLIST_FORCELUN; |
| |
| return 0; |
| } |
| |
| static int slave_configure(struct scsi_device *sdev) |
| { |
| struct us_data *us = host_to_us(sdev->host); |
| struct device *dev = sdev->host->dma_dev; |
| |
| /* |
| * Many devices have trouble transferring more than 32KB at a time, |
| * while others have trouble with more than 64K. At this time we |
| * are limiting both to 32K (64 sectores). |
| */ |
| if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) { |
| unsigned int max_sectors = 64; |
| |
| if (us->fflags & US_FL_MAX_SECTORS_MIN) |
| max_sectors = PAGE_SIZE >> 9; |
| if (queue_max_hw_sectors(sdev->request_queue) > max_sectors) |
| blk_queue_max_hw_sectors(sdev->request_queue, |
| max_sectors); |
| } else if (sdev->type == TYPE_TAPE) { |
| /* |
| * Tapes need much higher max_sector limits, so just |
| * raise it to the maximum possible (4 GB / 512) and |
| * let the queue segment size sort out the real limit. |
| */ |
| blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); |
| } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) { |
| /* |
| * USB3 devices will be limited to 2048 sectors. This gives us |
| * better throughput on most devices. |
| */ |
| blk_queue_max_hw_sectors(sdev->request_queue, 2048); |
| } |
| |
| /* |
| * The max_hw_sectors should be up to maximum size of a mapping for |
| * the device. Otherwise, a DMA API might fail on swiotlb environment. |
| */ |
| blk_queue_max_hw_sectors(sdev->request_queue, |
| min_t(size_t, queue_max_hw_sectors(sdev->request_queue), |
| dma_max_mapping_size(dev) >> SECTOR_SHIFT)); |
| |
| /* |
| * Some USB host controllers can't do DMA; they have to use PIO. |
| * For such controllers we need to make sure the block layer sets |
| * up bounce buffers in addressable memory. |
| */ |
| if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) || |
| (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL)) |
| blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); |
| |
| /* |
| * We can't put these settings in slave_alloc() because that gets |
| * called before the device type is known. Consequently these |
| * settings can't be overridden via the scsi devinfo mechanism. |
| */ |
| if (sdev->type == TYPE_DISK) { |
| |
| /* |
| * Some vendors seem to put the READ CAPACITY bug into |
| * all their devices -- primarily makers of cell phones |
| * and digital cameras. Since these devices always use |
| * flash media and can be expected to have an even number |
| * of sectors, we will always enable the CAPACITY_HEURISTICS |
| * flag unless told otherwise. |
| */ |
| switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { |
| case VENDOR_ID_NOKIA: |
| case VENDOR_ID_NIKON: |
| case VENDOR_ID_PENTAX: |
| case VENDOR_ID_MOTOROLA: |
| if (!(us->fflags & (US_FL_FIX_CAPACITY | |
| US_FL_CAPACITY_OK))) |
| us->fflags |= US_FL_CAPACITY_HEURISTICS; |
| break; |
| } |
| |
| /* |
| * Disk-type devices use MODE SENSE(6) if the protocol |
| * (SubClass) is Transparent SCSI, otherwise they use |
| * MODE SENSE(10). |
| */ |
| if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB) |
| sdev->use_10_for_ms = 1; |
| |
| /* |
| *Many disks only accept MODE SENSE transfer lengths of |
| * 192 bytes (that's what Windows uses). |
| */ |
| sdev->use_192_bytes_for_3f = 1; |
| |
| /* |
| * Some devices don't like MODE SENSE with page=0x3f, |
| * which is the command used for checking if a device |
| * is write-protected. Now that we tell the sd driver |
| * to do a 192-byte transfer with this command the |
| * majority of devices work fine, but a few still can't |
| * handle it. The sd driver will simply assume those |
| * devices are write-enabled. |
| */ |
| if (us->fflags & US_FL_NO_WP_DETECT) |
| sdev->skip_ms_page_3f = 1; |
| |
| /* |
| * A number of devices have problems with MODE SENSE for |
| * page x08, so we will skip it. |
| */ |
| sdev->skip_ms_page_8 = 1; |
| |
| /* |
| * Some devices don't handle VPD pages correctly, so skip vpd |
| * pages if not forced by SCSI layer. |
| */ |
| sdev->skip_vpd_pages = !sdev->try_vpd_pages; |
| |
| /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ |
| sdev->no_report_opcodes = 1; |
| |
| /* Do not attempt to use WRITE SAME */ |
| sdev->no_write_same = 1; |
| |
| /* |
| * Some disks return the total number of blocks in response |
| * to READ CAPACITY rather than the highest block number. |
| * If this device makes that mistake, tell the sd driver. |
| */ |
| if (us->fflags & US_FL_FIX_CAPACITY) |
| sdev->fix_capacity = 1; |
| |
| /* |
| * A few disks have two indistinguishable version, one of |
| * which reports the correct capacity and the other does not. |
| * The sd driver has to guess which is the case. |
| */ |
| if (us->fflags & US_FL_CAPACITY_HEURISTICS) |
| sdev->guess_capacity = 1; |
| |
| /* Some devices cannot handle READ_CAPACITY_16 */ |
| if (us->fflags & US_FL_NO_READ_CAPACITY_16) |
| sdev->no_read_capacity_16 = 1; |
| |
| /* |
| * Many devices do not respond properly to READ_CAPACITY_16. |
| * Tell the SCSI layer to try READ_CAPACITY_10 first. |
| * However some USB 3.0 drive enclosures return capacity |
| * modulo 2TB. Those must use READ_CAPACITY_16 |
| */ |
| if (!(us->fflags & US_FL_NEEDS_CAP16)) |
| sdev->try_rc_10_first = 1; |
| |
| /* |
| * assume SPC3 or latter devices support sense size > 18 |
| * unless US_FL_BAD_SENSE quirk is specified. |
| */ |
| if (sdev->scsi_level > SCSI_SPC_2 && |
| !(us->fflags & US_FL_BAD_SENSE)) |
| us->fflags |= US_FL_SANE_SENSE; |
| |
| /* |
| * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable |
| * Hardware Error) when any low-level error occurs, |
| * recoverable or not. Setting this flag tells the SCSI |
| * midlayer to retry such commands, which frequently will |
| * succeed and fix the error. The worst this can lead to |
| * is an occasional series of retries that will all fail. |
| */ |
| sdev->retry_hwerror = 1; |
| |
| /* |
| * USB disks should allow restart. Some drives spin down |
| * automatically, requiring a START-STOP UNIT command. |
| */ |
| sdev->allow_restart = 1; |
| |
| /* |
| * Some USB cardreaders have trouble reading an sdcard's last |
| * sector in a larger then 1 sector read, since the performance |
| * impact is negligible we set this flag for all USB disks |
| */ |
| sdev->last_sector_bug = 1; |
| |
| /* |
| * Enable last-sector hacks for single-target devices using |
| * the Bulk-only transport, unless we already know the |
| * capacity will be decremented or is correct. |
| */ |
| if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK | |
| US_FL_SCM_MULT_TARG)) && |
| us->protocol == USB_PR_BULK) |
| us->use_last_sector_hacks = 1; |
| |
| /* Check if write cache default on flag is set or not */ |
| if (us->fflags & US_FL_WRITE_CACHE) |
| sdev->wce_default_on = 1; |
| |
| /* A few buggy USB-ATA bridges don't understand FUA */ |
| if (us->fflags & US_FL_BROKEN_FUA) |
| sdev->broken_fua = 1; |
| |
| /* Some even totally fail to indicate a cache */ |
| if (us->fflags & US_FL_ALWAYS_SYNC) { |
| /* don't read caching information */ |
| sdev->skip_ms_page_8 = 1; |
| sdev->skip_ms_page_3f = 1; |
| /* assume sync is needed */ |
| sdev->wce_default_on = 1; |
| } |
| } else { |
| |
| /* |
| * Non-disk-type devices don't need to ignore any pages |
| * or to force 192-byte transfer lengths for MODE SENSE. |
| * But they do need to use MODE SENSE(10). |
| */ |
| sdev->use_10_for_ms = 1; |
| |
| /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */ |
| if (us->fflags & US_FL_NO_READ_DISC_INFO) |
| sdev->no_read_disc_info = 1; |
| } |
| |
| /* |
| * The CB and CBI transports have no way to pass LUN values |
| * other than the bits in the second byte of a CDB. But those |
| * bits don't get set to the LUN value if the device reports |
| * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily |
| * be single-LUN. |
| */ |
| if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) && |
| sdev->scsi_level == SCSI_UNKNOWN) |
| us->max_lun = 0; |
| |
| /* |
| * Some devices choke when they receive a PREVENT-ALLOW MEDIUM |
| * REMOVAL command, so suppress those commands. |
| */ |
| if (us->fflags & US_FL_NOT_LOCKABLE) |
| sdev->lockable = 0; |
| |
| /* |
| * this is to satisfy the compiler, tho I don't think the |
| * return code is ever checked anywhere. |
| */ |
| return 0; |
| } |
| |
| static int target_alloc(struct scsi_target *starget) |
| { |
| struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent)); |
| |
| /* |
| * Some USB drives don't support REPORT LUNS, even though they |
| * report a SCSI revision level above 2. Tell the SCSI layer |
| * not to issue that command; it will perform a normal sequential |
| * scan instead. |
| */ |
| starget->no_report_luns = 1; |
| |
| /* |
| * The UFI spec treats the Peripheral Qualifier bits in an |
| * INQUIRY result as reserved and requires devices to set them |
| * to 0. However the SCSI spec requires these bits to be set |
| * to 3 to indicate when a LUN is not present. |
| * |
| * Let the scanning code know if this target merely sets |
| * Peripheral Device Type to 0x1f to indicate no LUN. |
| */ |
| if (us->subclass == USB_SC_UFI) |
| starget->pdt_1f_for_no_lun = 1; |
| |
| return 0; |
| } |
| |
| /* queue a command */ |
| /* This is always called with scsi_lock(host) held */ |
| static int queuecommand_lck(struct scsi_cmnd *srb, |
| void (*done)(struct scsi_cmnd *)) |
| { |
| struct us_data *us = host_to_us(srb->device->host); |
| |
| /* check for state-transition errors */ |
| if (us->srb != NULL) { |
| dev_err(&us->pusb_intf->dev, |
| "Error in %s: us->srb = %p\n", __func__, us->srb); |
| return SCSI_MLQUEUE_HOST_BUSY; |
| } |
| |
| /* fail the command if we are disconnecting */ |
| if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
| usb_stor_dbg(us, "Fail command during disconnect\n"); |
| srb->result = DID_NO_CONNECT << 16; |
| done(srb); |
| return 0; |
| } |
| |
| if ((us->fflags & US_FL_NO_ATA_1X) && |
| (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) { |
| memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB, |
| sizeof(usb_stor_sense_invalidCDB)); |
| srb->result = SAM_STAT_CHECK_CONDITION; |
| done(srb); |
| return 0; |
| } |
| |
| /* enqueue the command and wake up the control thread */ |
| srb->scsi_done = done; |
| us->srb = srb; |
| complete(&us->cmnd_ready); |
| |
| return 0; |
| } |
| |
| static DEF_SCSI_QCMD(queuecommand) |
| |
| /*********************************************************************** |
| * Error handling functions |
| ***********************************************************************/ |
| |
| /* Command timeout and abort */ |
| static int command_abort(struct scsi_cmnd *srb) |
| { |
| struct us_data *us = host_to_us(srb->device->host); |
| |
| usb_stor_dbg(us, "%s called\n", __func__); |
| |
| /* |
| * us->srb together with the TIMED_OUT, RESETTING, and ABORTING |
| * bits are protected by the host lock. |
| */ |
| scsi_lock(us_to_host(us)); |
| |
| /* Is this command still active? */ |
| if (us->srb != srb) { |
| scsi_unlock(us_to_host(us)); |
| usb_stor_dbg(us, "-- nothing to abort\n"); |
| return FAILED; |
| } |
| |
| /* |
| * Set the TIMED_OUT bit. Also set the ABORTING bit, but only if |
| * a device reset isn't already in progress (to avoid interfering |
| * with the reset). Note that we must retain the host lock while |
| * calling usb_stor_stop_transport(); otherwise it might interfere |
| * with an auto-reset that begins as soon as we release the lock. |
| */ |
| set_bit(US_FLIDX_TIMED_OUT, &us->dflags); |
| if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) { |
| set_bit(US_FLIDX_ABORTING, &us->dflags); |
| usb_stor_stop_transport(us); |
| } |
| scsi_unlock(us_to_host(us)); |
| |
| /* Wait for the aborted command to finish */ |
| wait_for_completion(&us->notify); |
| return SUCCESS; |
| } |
| |
| /* |
| * This invokes the transport reset mechanism to reset the state of the |
| * device |
| */ |
| static int device_reset(struct scsi_cmnd *srb) |
| { |
| struct us_data *us = host_to_us(srb->device->host); |
| int result; |
| |
| usb_stor_dbg(us, "%s called\n", __func__); |
| |
| /* lock the device pointers and do the reset */ |
| mutex_lock(&(us->dev_mutex)); |
| result = us->transport_reset(us); |
| mutex_unlock(&us->dev_mutex); |
| |
| return result < 0 ? FAILED : SUCCESS; |
| } |
| |
| /* Simulate a SCSI bus reset by resetting the device's USB port. */ |
| static int bus_reset(struct scsi_cmnd *srb) |
| { |
| struct us_data *us = host_to_us(srb->device->host); |
| int result; |
| |
| usb_stor_dbg(us, "%s called\n", __func__); |
| |
| result = usb_stor_port_reset(us); |
| return result < 0 ? FAILED : SUCCESS; |
| } |
| |
| /* |
| * Report a driver-initiated device reset to the SCSI layer. |
| * Calling this for a SCSI-initiated reset is unnecessary but harmless. |
| * The caller must own the SCSI host lock. |
| */ |
| void usb_stor_report_device_reset(struct us_data *us) |
| { |
| int i; |
| struct Scsi_Host *host = us_to_host(us); |
| |
| scsi_report_device_reset(host, 0, 0); |
| if (us->fflags & US_FL_SCM_MULT_TARG) { |
| for (i = 1; i < host->max_id; ++i) |
| scsi_report_device_reset(host, 0, i); |
| } |
| } |
| |
| /* |
| * Report a driver-initiated bus reset to the SCSI layer. |
| * Calling this for a SCSI-initiated reset is unnecessary but harmless. |
| * The caller must not own the SCSI host lock. |
| */ |
| void usb_stor_report_bus_reset(struct us_data *us) |
| { |
| struct Scsi_Host *host = us_to_host(us); |
| |
| scsi_lock(host); |
| scsi_report_bus_reset(host, 0); |
| scsi_unlock(host); |
| } |
| |
| /*********************************************************************** |
| * /proc/scsi/ functions |
| ***********************************************************************/ |
| |
| static int write_info(struct Scsi_Host *host, char *buffer, int length) |
| { |
| /* if someone is sending us data, just throw it away */ |
| return length; |
| } |
| |
| static int show_info (struct seq_file *m, struct Scsi_Host *host) |
| { |
| struct us_data *us = host_to_us(host); |
| const char *string; |
| |
| /* print the controller name */ |
| seq_printf(m, " Host scsi%d: usb-storage\n", host->host_no); |
| |
| /* print product, vendor, and serial number strings */ |
| if (us->pusb_dev->manufacturer) |
| string = us->pusb_dev->manufacturer; |
| else if (us->unusual_dev->vendorName) |
| string = us->unusual_dev->vendorName; |
| else |
| string = "Unknown"; |
| seq_printf(m, " Vendor: %s\n", string); |
| if (us->pusb_dev->product) |
| string = us->pusb_dev->product; |
| else if (us->unusual_dev->productName) |
| string = us->unusual_dev->productName; |
| else |
| string = "Unknown"; |
| seq_printf(m, " Product: %s\n", string); |
| if (us->pusb_dev->serial) |
| string = us->pusb_dev->serial; |
| else |
| string = "None"; |
| seq_printf(m, "Serial Number: %s\n", string); |
| |
| /* show the protocol and transport */ |
| seq_printf(m, " Protocol: %s\n", us->protocol_name); |
| seq_printf(m, " Transport: %s\n", us->transport_name); |
| |
| /* show the device flags */ |
| seq_printf(m, " Quirks:"); |
| |
| #define US_FLAG(name, value) \ |
| if (us->fflags & value) seq_printf(m, " " #name); |
| US_DO_ALL_FLAGS |
| #undef US_FLAG |
| seq_putc(m, '\n'); |
| return 0; |
| } |
| |
| /*********************************************************************** |
| * Sysfs interface |
| ***********************************************************************/ |
| |
| /* Output routine for the sysfs max_sectors file */ |
| static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct scsi_device *sdev = to_scsi_device(dev); |
| |
| return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue)); |
| } |
| |
| /* Input routine for the sysfs max_sectors file */ |
| static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct scsi_device *sdev = to_scsi_device(dev); |
| unsigned short ms; |
| |
| if (sscanf(buf, "%hu", &ms) > 0) { |
| blk_queue_max_hw_sectors(sdev->request_queue, ms); |
| return count; |
| } |
| return -EINVAL; |
| } |
| static DEVICE_ATTR_RW(max_sectors); |
| |
| static struct device_attribute *sysfs_device_attr_list[] = { |
| &dev_attr_max_sectors, |
| NULL, |
| }; |
| |
| /* |
| * this defines our host template, with which we'll allocate hosts |
| */ |
| |
| static const struct scsi_host_template usb_stor_host_template = { |
| /* basic userland interface stuff */ |
| .name = "usb-storage", |
| .proc_name = "usb-storage", |
| .show_info = show_info, |
| .write_info = write_info, |
| .info = host_info, |
| |
| /* command interface -- queued only */ |
| .queuecommand = queuecommand, |
| |
| /* error and abort handlers */ |
| .eh_abort_handler = command_abort, |
| .eh_device_reset_handler = device_reset, |
| .eh_bus_reset_handler = bus_reset, |
| |
| /* queue commands only, only one command per LUN */ |
| .can_queue = 1, |
| |
| /* unknown initiator id */ |
| .this_id = -1, |
| |
| .slave_alloc = slave_alloc, |
| .slave_configure = slave_configure, |
| .target_alloc = target_alloc, |
| |
| /* lots of sg segments can be handled */ |
| .sg_tablesize = SG_MAX_SEGMENTS, |
| |
| |
| /* |
| * Limit the total size of a transfer to 120 KB. |
| * |
| * Some devices are known to choke with anything larger. It seems like |
| * the problem stems from the fact that original IDE controllers had |
| * only an 8-bit register to hold the number of sectors in one transfer |
| * and even those couldn't handle a full 256 sectors. |
| * |
| * Because we want to make sure we interoperate with as many devices as |
| * possible, we will maintain a 240 sector transfer size limit for USB |
| * Mass Storage devices. |
| * |
| * Tests show that other operating have similar limits with Microsoft |
| * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3 |
| * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2 |
| * and 2048 for USB3 devices. |
| */ |
| .max_sectors = 240, |
| |
| /* emulated HBA */ |
| .emulated = 1, |
| |
| /* we do our own delay after a device or bus reset */ |
| .skip_settle_delay = 1, |
| |
| /* sysfs device attributes */ |
| .sdev_attrs = sysfs_device_attr_list, |
| |
| /* module management */ |
| .module = THIS_MODULE |
| }; |
| |
| void usb_stor_host_template_init(struct scsi_host_template *sht, |
| const char *name, struct module *owner) |
| { |
| *sht = usb_stor_host_template; |
| sht->name = name; |
| sht->proc_name = name; |
| sht->module = owner; |
| } |
| EXPORT_SYMBOL_GPL(usb_stor_host_template_init); |
| |
| /* To Report "Illegal Request: Invalid Field in CDB */ |
| unsigned char usb_stor_sense_invalidCDB[18] = { |
| [0] = 0x70, /* current error */ |
| [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */ |
| [7] = 0x0a, /* additional length */ |
| [12] = 0x24 /* Invalid Field in CDB */ |
| }; |
| EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB); |