| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * First generation of pinmux driver for Amlogic Meson SoCs |
| * |
| * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> |
| * Copyright (C) 2017 Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| /* For this first generation of pinctrl driver every pinmux group can be |
| * enabled by a specific bit in the first register range. When all groups for |
| * a given pin are disabled the pin acts as a GPIO. |
| */ |
| #include <linux/device.h> |
| #include <linux/regmap.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #include "pinctrl-meson.h" |
| #include "pinctrl-meson8-pmx.h" |
| |
| /** |
| * meson8_pmx_disable_other_groups() - disable other groups using a given pin |
| * |
| * @pc: meson pin controller device |
| * @pin: number of the pin |
| * @sel_group: index of the selected group, or -1 if none |
| * |
| * The function disables all pinmux groups using a pin except the |
| * selected one. If @sel_group is -1 all groups are disabled, leaving |
| * the pin in GPIO mode. |
| */ |
| static void meson8_pmx_disable_other_groups(struct meson_pinctrl *pc, |
| unsigned int pin, int sel_group) |
| { |
| struct meson_pmx_group *group; |
| struct meson8_pmx_data *pmx_data; |
| int i, j; |
| |
| for (i = 0; i < pc->data->num_groups; i++) { |
| group = &pc->data->groups[i]; |
| pmx_data = (struct meson8_pmx_data *)group->data; |
| if (pmx_data->is_gpio || i == sel_group) |
| continue; |
| |
| for (j = 0; j < group->num_pins; j++) { |
| if (group->pins[j] == pin) { |
| /* We have found a group using the pin */ |
| regmap_update_bits(pc->reg_mux, |
| pmx_data->reg * 4, |
| BIT(pmx_data->bit), 0); |
| } |
| } |
| } |
| } |
| |
| static int meson8_pmx_set_mux(struct pinctrl_dev *pcdev, unsigned func_num, |
| unsigned group_num) |
| { |
| struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev); |
| struct meson_pmx_func *func = &pc->data->funcs[func_num]; |
| struct meson_pmx_group *group = &pc->data->groups[group_num]; |
| struct meson8_pmx_data *pmx_data = |
| (struct meson8_pmx_data *)group->data; |
| int i, ret = 0; |
| |
| dev_dbg(pc->dev, "enable function %s, group %s\n", func->name, |
| group->name); |
| |
| /* |
| * Disable groups using the same pin. |
| * The selected group is not disabled to avoid glitches. |
| */ |
| for (i = 0; i < group->num_pins; i++) |
| meson8_pmx_disable_other_groups(pc, group->pins[i], group_num); |
| |
| /* Function 0 (GPIO) doesn't need any additional setting */ |
| if (func_num) |
| ret = regmap_update_bits(pc->reg_mux, pmx_data->reg * 4, |
| BIT(pmx_data->bit), |
| BIT(pmx_data->bit)); |
| |
| return ret; |
| } |
| |
| static int meson8_pmx_request_gpio(struct pinctrl_dev *pcdev, |
| struct pinctrl_gpio_range *range, |
| unsigned offset) |
| { |
| struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev); |
| |
| meson8_pmx_disable_other_groups(pc, offset, -1); |
| |
| return 0; |
| } |
| |
| const struct pinmux_ops meson8_pmx_ops = { |
| .set_mux = meson8_pmx_set_mux, |
| .get_functions_count = meson_pmx_get_funcs_count, |
| .get_function_name = meson_pmx_get_func_name, |
| .get_function_groups = meson_pmx_get_groups, |
| .gpio_request_enable = meson8_pmx_request_gpio, |
| }; |