| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _X86_IRQFLAGS_H_ |
| #define _X86_IRQFLAGS_H_ |
| |
| #include <asm/processor-flags.h> |
| |
| #ifndef __ASSEMBLY__ |
| |
| /* Provide __cpuidle; we can't safely include <linux/cpu.h> */ |
| #define __cpuidle __attribute__((__section__(".cpuidle.text"))) |
| |
| /* |
| * Interrupt control: |
| */ |
| |
| static inline unsigned long native_save_fl(void) |
| { |
| unsigned long flags; |
| |
| /* |
| * "=rm" is safe here, because "pop" adjusts the stack before |
| * it evaluates its effective address -- this is part of the |
| * documented behavior of the "pop" instruction. |
| */ |
| asm volatile("# __raw_save_flags\n\t" |
| "pushf ; pop %0" |
| : "=rm" (flags) |
| : /* no input */ |
| : "memory"); |
| |
| return flags; |
| } |
| |
| static inline void native_restore_fl(unsigned long flags) |
| { |
| asm volatile("push %0 ; popf" |
| : /* no output */ |
| :"g" (flags) |
| :"memory", "cc"); |
| } |
| |
| static inline void native_irq_disable(void) |
| { |
| asm volatile("cli": : :"memory"); |
| } |
| |
| static inline void native_irq_enable(void) |
| { |
| asm volatile("sti": : :"memory"); |
| } |
| |
| static inline __cpuidle void native_safe_halt(void) |
| { |
| asm volatile("sti; hlt": : :"memory"); |
| } |
| |
| static inline __cpuidle void native_halt(void) |
| { |
| asm volatile("hlt": : :"memory"); |
| } |
| |
| #endif |
| |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/paravirt.h> |
| #else |
| #ifndef __ASSEMBLY__ |
| #include <linux/types.h> |
| |
| static inline notrace unsigned long arch_local_save_flags(void) |
| { |
| return native_save_fl(); |
| } |
| |
| static inline notrace void arch_local_irq_restore(unsigned long flags) |
| { |
| native_restore_fl(flags); |
| } |
| |
| static inline notrace void arch_local_irq_disable(void) |
| { |
| native_irq_disable(); |
| } |
| |
| static inline notrace void arch_local_irq_enable(void) |
| { |
| native_irq_enable(); |
| } |
| |
| /* |
| * Used in the idle loop; sti takes one instruction cycle |
| * to complete: |
| */ |
| static inline __cpuidle void arch_safe_halt(void) |
| { |
| native_safe_halt(); |
| } |
| |
| /* |
| * Used when interrupts are already enabled or to |
| * shutdown the processor: |
| */ |
| static inline __cpuidle void halt(void) |
| { |
| native_halt(); |
| } |
| |
| /* |
| * For spinlocks, etc: |
| */ |
| static inline notrace unsigned long arch_local_irq_save(void) |
| { |
| unsigned long flags = arch_local_save_flags(); |
| arch_local_irq_disable(); |
| return flags; |
| } |
| #else |
| |
| #define ENABLE_INTERRUPTS(x) sti |
| #define DISABLE_INTERRUPTS(x) cli |
| |
| #ifdef CONFIG_X86_64 |
| #define SWAPGS swapgs |
| /* |
| * Currently paravirt can't handle swapgs nicely when we |
| * don't have a stack we can rely on (such as a user space |
| * stack). So we either find a way around these or just fault |
| * and emulate if a guest tries to call swapgs directly. |
| * |
| * Either way, this is a good way to document that we don't |
| * have a reliable stack. x86_64 only. |
| */ |
| #define SWAPGS_UNSAFE_STACK swapgs |
| |
| #define PARAVIRT_ADJUST_EXCEPTION_FRAME /* */ |
| |
| #define INTERRUPT_RETURN jmp native_iret |
| #define USERGS_SYSRET64 \ |
| swapgs; \ |
| sysretq; |
| #define USERGS_SYSRET32 \ |
| swapgs; \ |
| sysretl |
| |
| #ifdef CONFIG_DEBUG_ENTRY |
| #define SAVE_FLAGS(x) pushfq; popq %rax |
| #endif |
| #else |
| #define INTERRUPT_RETURN iret |
| #define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit |
| #define GET_CR0_INTO_EAX movl %cr0, %eax |
| #endif |
| |
| |
| #endif /* __ASSEMBLY__ */ |
| #endif /* CONFIG_PARAVIRT */ |
| |
| #ifndef __ASSEMBLY__ |
| static inline int arch_irqs_disabled_flags(unsigned long flags) |
| { |
| return !(flags & X86_EFLAGS_IF); |
| } |
| |
| static inline int arch_irqs_disabled(void) |
| { |
| unsigned long flags = arch_local_save_flags(); |
| |
| return arch_irqs_disabled_flags(flags); |
| } |
| #endif /* !__ASSEMBLY__ */ |
| |
| #ifdef __ASSEMBLY__ |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| # define TRACE_IRQS_ON call trace_hardirqs_on_thunk; |
| # define TRACE_IRQS_OFF call trace_hardirqs_off_thunk; |
| #else |
| # define TRACE_IRQS_ON |
| # define TRACE_IRQS_OFF |
| #endif |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC |
| # ifdef CONFIG_X86_64 |
| # define LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk |
| # define LOCKDEP_SYS_EXIT_IRQ \ |
| TRACE_IRQS_ON; \ |
| sti; \ |
| call lockdep_sys_exit_thunk; \ |
| cli; \ |
| TRACE_IRQS_OFF; |
| # else |
| # define LOCKDEP_SYS_EXIT \ |
| pushl %eax; \ |
| pushl %ecx; \ |
| pushl %edx; \ |
| call lockdep_sys_exit; \ |
| popl %edx; \ |
| popl %ecx; \ |
| popl %eax; |
| # define LOCKDEP_SYS_EXIT_IRQ |
| # endif |
| #else |
| # define LOCKDEP_SYS_EXIT |
| # define LOCKDEP_SYS_EXIT_IRQ |
| #endif |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif |