| /* |
| * Copyright (C) 2014 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* |
| * iProc SDHCI platform driver |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/mmc/host.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include "sdhci-pltfm.h" |
| |
| struct sdhci_iproc_data { |
| const struct sdhci_pltfm_data *pdata; |
| u32 caps; |
| u32 caps1; |
| u32 mmc_caps; |
| }; |
| |
| struct sdhci_iproc_host { |
| const struct sdhci_iproc_data *data; |
| u32 shadow_cmd; |
| u32 shadow_blk; |
| bool is_cmd_shadowed; |
| bool is_blk_shadowed; |
| }; |
| |
| #define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18) |
| |
| static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg) |
| { |
| u32 val = readl(host->ioaddr + reg); |
| |
| pr_debug("%s: readl [0x%02x] 0x%08x\n", |
| mmc_hostname(host->mmc), reg, val); |
| return val; |
| } |
| |
| static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host); |
| u32 val; |
| u16 word; |
| |
| if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) { |
| /* Get the saved transfer mode */ |
| val = iproc_host->shadow_cmd; |
| } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) && |
| iproc_host->is_blk_shadowed) { |
| /* Get the saved block info */ |
| val = iproc_host->shadow_blk; |
| } else { |
| val = sdhci_iproc_readl(host, (reg & ~3)); |
| } |
| word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff; |
| return word; |
| } |
| |
| static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg) |
| { |
| u32 val = sdhci_iproc_readl(host, (reg & ~3)); |
| u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff; |
| return byte; |
| } |
| |
| static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg) |
| { |
| pr_debug("%s: writel [0x%02x] 0x%08x\n", |
| mmc_hostname(host->mmc), reg, val); |
| |
| writel(val, host->ioaddr + reg); |
| |
| if (host->clock <= 400000) { |
| /* Round up to micro-second four SD clock delay */ |
| if (host->clock) |
| udelay((4 * 1000000 + host->clock - 1) / host->clock); |
| else |
| udelay(10); |
| } |
| } |
| |
| /* |
| * The Arasan has a bugette whereby it may lose the content of successive |
| * writes to the same register that are within two SD-card clock cycles of |
| * each other (a clock domain crossing problem). The data |
| * register does not have this problem, which is just as well - otherwise we'd |
| * have to nobble the DMA engine too. |
| * |
| * This wouldn't be a problem with the code except that we can only write the |
| * controller with 32-bit writes. So two different 16-bit registers are |
| * written back to back creates the problem. |
| * |
| * In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT |
| * are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND. |
| * The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so |
| * the work around can be further optimized. We can keep shadow values of |
| * BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued. |
| * Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed |
| * by the TRANSFER+COMMAND in another 32-bit write. |
| */ |
| static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host); |
| u32 word_shift = REG_OFFSET_IN_BITS(reg); |
| u32 mask = 0xffff << word_shift; |
| u32 oldval, newval; |
| |
| if (reg == SDHCI_COMMAND) { |
| /* Write the block now as we are issuing a command */ |
| if (iproc_host->is_blk_shadowed) { |
| sdhci_iproc_writel(host, iproc_host->shadow_blk, |
| SDHCI_BLOCK_SIZE); |
| iproc_host->is_blk_shadowed = false; |
| } |
| oldval = iproc_host->shadow_cmd; |
| iproc_host->is_cmd_shadowed = false; |
| } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) && |
| iproc_host->is_blk_shadowed) { |
| /* Block size and count are stored in shadow reg */ |
| oldval = iproc_host->shadow_blk; |
| } else { |
| /* Read reg, all other registers are not shadowed */ |
| oldval = sdhci_iproc_readl(host, (reg & ~3)); |
| } |
| newval = (oldval & ~mask) | (val << word_shift); |
| |
| if (reg == SDHCI_TRANSFER_MODE) { |
| /* Save the transfer mode until the command is issued */ |
| iproc_host->shadow_cmd = newval; |
| iproc_host->is_cmd_shadowed = true; |
| } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) { |
| /* Save the block info until the command is issued */ |
| iproc_host->shadow_blk = newval; |
| iproc_host->is_blk_shadowed = true; |
| } else { |
| /* Command or other regular 32-bit write */ |
| sdhci_iproc_writel(host, newval, reg & ~3); |
| } |
| } |
| |
| static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| u32 oldval = sdhci_iproc_readl(host, (reg & ~3)); |
| u32 byte_shift = REG_OFFSET_IN_BITS(reg); |
| u32 mask = 0xff << byte_shift; |
| u32 newval = (oldval & ~mask) | (val << byte_shift); |
| |
| sdhci_iproc_writel(host, newval, reg & ~3); |
| } |
| |
| static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| |
| if (pltfm_host->clk) |
| return sdhci_pltfm_clk_get_max_clock(host); |
| else |
| return pltfm_host->clock; |
| } |
| |
| static const struct sdhci_ops sdhci_iproc_ops = { |
| .set_clock = sdhci_set_clock, |
| .get_max_clock = sdhci_iproc_get_max_clock, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| static const struct sdhci_ops sdhci_iproc_32only_ops = { |
| .read_l = sdhci_iproc_readl, |
| .read_w = sdhci_iproc_readw, |
| .read_b = sdhci_iproc_readb, |
| .write_l = sdhci_iproc_writel, |
| .write_w = sdhci_iproc_writew, |
| .write_b = sdhci_iproc_writeb, |
| .set_clock = sdhci_set_clock, |
| .get_max_clock = sdhci_iproc_get_max_clock, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = { |
| .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | |
| SDHCI_QUIRK_NO_HISPD_BIT, |
| .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON, |
| .ops = &sdhci_iproc_32only_ops, |
| }; |
| |
| static const struct sdhci_iproc_data iproc_cygnus_data = { |
| .pdata = &sdhci_iproc_cygnus_pltfm_data, |
| .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT) |
| & SDHCI_MAX_BLOCK_MASK) | |
| SDHCI_CAN_VDD_330 | |
| SDHCI_CAN_VDD_180 | |
| SDHCI_CAN_DO_SUSPEND | |
| SDHCI_CAN_DO_HISPD | |
| SDHCI_CAN_DO_ADMA2 | |
| SDHCI_CAN_DO_SDMA, |
| .caps1 = SDHCI_DRIVER_TYPE_C | |
| SDHCI_DRIVER_TYPE_D | |
| SDHCI_SUPPORT_DDR50, |
| .mmc_caps = MMC_CAP_1_8V_DDR, |
| }; |
| |
| static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = { |
| .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | |
| SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 | |
| SDHCI_QUIRK_NO_HISPD_BIT, |
| .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN, |
| .ops = &sdhci_iproc_ops, |
| }; |
| |
| static const struct sdhci_iproc_data iproc_data = { |
| .pdata = &sdhci_iproc_pltfm_data, |
| .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT) |
| & SDHCI_MAX_BLOCK_MASK) | |
| SDHCI_CAN_VDD_330 | |
| SDHCI_CAN_VDD_180 | |
| SDHCI_CAN_DO_SUSPEND | |
| SDHCI_CAN_DO_HISPD | |
| SDHCI_CAN_DO_ADMA2 | |
| SDHCI_CAN_DO_SDMA, |
| .caps1 = SDHCI_DRIVER_TYPE_C | |
| SDHCI_DRIVER_TYPE_D | |
| SDHCI_SUPPORT_DDR50, |
| }; |
| |
| static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = { |
| .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | |
| SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | |
| SDHCI_QUIRK_MISSING_CAPS | |
| SDHCI_QUIRK_NO_HISPD_BIT, |
| .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, |
| .ops = &sdhci_iproc_32only_ops, |
| }; |
| |
| static const struct sdhci_iproc_data bcm2835_data = { |
| .pdata = &sdhci_bcm2835_pltfm_data, |
| .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT) |
| & SDHCI_MAX_BLOCK_MASK) | |
| SDHCI_CAN_VDD_330 | |
| SDHCI_CAN_DO_HISPD, |
| .caps1 = SDHCI_DRIVER_TYPE_A | |
| SDHCI_DRIVER_TYPE_C, |
| .mmc_caps = 0x00000000, |
| }; |
| |
| static const struct sdhci_ops sdhci_iproc_bcm2711_ops = { |
| .read_l = sdhci_iproc_readl, |
| .read_w = sdhci_iproc_readw, |
| .read_b = sdhci_iproc_readb, |
| .write_l = sdhci_iproc_writel, |
| .write_w = sdhci_iproc_writew, |
| .write_b = sdhci_iproc_writeb, |
| .set_clock = sdhci_set_clock, |
| .set_power = sdhci_set_power_and_bus_voltage, |
| .get_max_clock = sdhci_iproc_get_max_clock, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = { |
| .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12, |
| .ops = &sdhci_iproc_bcm2711_ops, |
| }; |
| |
| static const struct sdhci_iproc_data bcm2711_data = { |
| .pdata = &sdhci_bcm2711_pltfm_data, |
| .mmc_caps = MMC_CAP_3_3V_DDR, |
| }; |
| |
| static const struct of_device_id sdhci_iproc_of_match[] = { |
| { .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data }, |
| { .compatible = "brcm,bcm2711-emmc2", .data = &bcm2711_data }, |
| { .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data}, |
| { .compatible = "brcm,sdhci-iproc", .data = &iproc_data }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match); |
| |
| #ifdef CONFIG_ACPI |
| /* |
| * This is a duplicate of bcm2835_(pltfrm_)data without caps quirks |
| * which are provided by the ACPI table. |
| */ |
| static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = { |
| .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | |
| SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | |
| SDHCI_QUIRK_NO_HISPD_BIT, |
| .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, |
| .ops = &sdhci_iproc_32only_ops, |
| }; |
| |
| static const struct sdhci_iproc_data bcm_arasan_data = { |
| .pdata = &sdhci_bcm_arasan_data, |
| }; |
| |
| static const struct acpi_device_id sdhci_iproc_acpi_ids[] = { |
| { .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data }, |
| { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data }, |
| { .id = "BCM2847", .driver_data = (kernel_ulong_t)&bcm_arasan_data }, |
| { .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids); |
| #endif |
| |
| static int sdhci_iproc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct sdhci_iproc_data *iproc_data = NULL; |
| struct sdhci_host *host; |
| struct sdhci_iproc_host *iproc_host; |
| struct sdhci_pltfm_host *pltfm_host; |
| int ret; |
| |
| iproc_data = device_get_match_data(dev); |
| if (!iproc_data) |
| return -ENODEV; |
| |
| host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host)); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| pltfm_host = sdhci_priv(host); |
| iproc_host = sdhci_pltfm_priv(pltfm_host); |
| |
| iproc_host->data = iproc_data; |
| |
| ret = mmc_of_parse(host->mmc); |
| if (ret) |
| goto err; |
| |
| sdhci_get_property(pdev); |
| |
| host->mmc->caps |= iproc_host->data->mmc_caps; |
| |
| if (dev->of_node) { |
| pltfm_host->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(pltfm_host->clk)) { |
| ret = PTR_ERR(pltfm_host->clk); |
| goto err; |
| } |
| ret = clk_prepare_enable(pltfm_host->clk); |
| if (ret) { |
| dev_err(dev, "failed to enable host clk\n"); |
| goto err; |
| } |
| } |
| |
| if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) { |
| host->caps = iproc_host->data->caps; |
| host->caps1 = iproc_host->data->caps1; |
| } |
| |
| ret = sdhci_add_host(host); |
| if (ret) |
| goto err_clk; |
| |
| return 0; |
| |
| err_clk: |
| if (dev->of_node) |
| clk_disable_unprepare(pltfm_host->clk); |
| err: |
| sdhci_pltfm_free(pdev); |
| return ret; |
| } |
| |
| static struct platform_driver sdhci_iproc_driver = { |
| .driver = { |
| .name = "sdhci-iproc", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = sdhci_iproc_of_match, |
| .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids), |
| .pm = &sdhci_pltfm_pmops, |
| }, |
| .probe = sdhci_iproc_probe, |
| .remove = sdhci_pltfm_unregister, |
| }; |
| module_platform_driver(sdhci_iproc_driver); |
| |
| MODULE_AUTHOR("Broadcom"); |
| MODULE_DESCRIPTION("IPROC SDHCI driver"); |
| MODULE_LICENSE("GPL v2"); |