| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2019 Genesys Logic, Inc. |
| * |
| * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw> |
| * |
| * Version: v0.9.0 (2019-08-08) |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bits.h> |
| #include <linux/pci.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/delay.h> |
| #include "sdhci.h" |
| #include "sdhci-pci.h" |
| #include "cqhci.h" |
| |
| /* Genesys Logic extra registers */ |
| #define SDHCI_GLI_9750_WT 0x800 |
| #define SDHCI_GLI_9750_WT_EN BIT(0) |
| #define GLI_9750_WT_EN_ON 0x1 |
| #define GLI_9750_WT_EN_OFF 0x0 |
| |
| #define SDHCI_GLI_9750_DRIVING 0x860 |
| #define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0) |
| #define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26) |
| #define GLI_9750_DRIVING_1_VALUE 0xFFF |
| #define GLI_9750_DRIVING_2_VALUE 0x3 |
| #define SDHCI_GLI_9750_SEL_1 BIT(29) |
| #define SDHCI_GLI_9750_SEL_2 BIT(31) |
| #define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30)) |
| |
| #define SDHCI_GLI_9750_PLL 0x864 |
| #define SDHCI_GLI_9750_PLL_LDIV GENMASK(9, 0) |
| #define SDHCI_GLI_9750_PLL_PDIV GENMASK(14, 12) |
| #define SDHCI_GLI_9750_PLL_DIR BIT(15) |
| #define SDHCI_GLI_9750_PLL_TX2_INV BIT(23) |
| #define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20) |
| #define GLI_9750_PLL_TX2_INV_VALUE 0x1 |
| #define GLI_9750_PLL_TX2_DLY_VALUE 0x0 |
| #define SDHCI_GLI_9750_PLLSSC_STEP GENMASK(28, 24) |
| #define SDHCI_GLI_9750_PLLSSC_EN BIT(31) |
| |
| #define SDHCI_GLI_9750_PLLSSC 0x86C |
| #define SDHCI_GLI_9750_PLLSSC_PPM GENMASK(31, 16) |
| |
| #define SDHCI_GLI_9750_SW_CTRL 0x874 |
| #define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6) |
| #define GLI_9750_SW_CTRL_4_VALUE 0x3 |
| |
| #define SDHCI_GLI_9750_MISC 0x878 |
| #define SDHCI_GLI_9750_MISC_TX1_INV BIT(2) |
| #define SDHCI_GLI_9750_MISC_RX_INV BIT(3) |
| #define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4) |
| #define GLI_9750_MISC_TX1_INV_VALUE 0x0 |
| #define GLI_9750_MISC_RX_INV_ON 0x1 |
| #define GLI_9750_MISC_RX_INV_OFF 0x0 |
| #define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF |
| #define GLI_9750_MISC_TX1_DLY_VALUE 0x5 |
| |
| #define SDHCI_GLI_9750_TUNING_CONTROL 0x540 |
| #define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4) |
| #define GLI_9750_TUNING_CONTROL_EN_ON 0x1 |
| #define GLI_9750_TUNING_CONTROL_EN_OFF 0x0 |
| #define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16) |
| #define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19) |
| #define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1 |
| #define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2 |
| |
| #define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544 |
| #define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0) |
| #define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1 |
| |
| #define SDHCI_GLI_9763E_CTRL_HS400 0x7 |
| |
| #define SDHCI_GLI_9763E_HS400_ES_REG 0x52C |
| #define SDHCI_GLI_9763E_HS400_ES_BIT BIT(8) |
| |
| #define PCIE_GLI_9763E_VHS 0x884 |
| #define GLI_9763E_VHS_REV GENMASK(19, 16) |
| #define GLI_9763E_VHS_REV_R 0x0 |
| #define GLI_9763E_VHS_REV_M 0x1 |
| #define GLI_9763E_VHS_REV_W 0x2 |
| #define PCIE_GLI_9763E_MB 0x888 |
| #define GLI_9763E_MB_CMDQ_OFF BIT(19) |
| #define GLI_9763E_MB_ERP_ON BIT(7) |
| #define PCIE_GLI_9763E_SCR 0x8E0 |
| #define GLI_9763E_SCR_AXI_REQ BIT(9) |
| |
| #define PCIE_GLI_9763E_CFG2 0x8A4 |
| #define GLI_9763E_CFG2_L1DLY GENMASK(28, 19) |
| #define GLI_9763E_CFG2_L1DLY_MAX 0x3FF |
| |
| #define PCIE_GLI_9763E_MMC_CTRL 0x960 |
| #define GLI_9763E_HS400_SLOW BIT(3) |
| |
| #define PCIE_GLI_9763E_CLKRXDLY 0x934 |
| #define GLI_9763E_HS400_RXDLY GENMASK(31, 28) |
| #define GLI_9763E_HS400_RXDLY_5 0x5 |
| |
| #define SDHCI_GLI_9763E_CQE_BASE_ADDR 0x200 |
| #define GLI_9763E_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \ |
| SDHCI_TRNS_BLK_CNT_EN | \ |
| SDHCI_TRNS_DMA) |
| |
| #define PCI_GLI_9755_WT 0x800 |
| #define PCI_GLI_9755_WT_EN BIT(0) |
| #define GLI_9755_WT_EN_ON 0x1 |
| #define GLI_9755_WT_EN_OFF 0x0 |
| |
| #define PCI_GLI_9755_PECONF 0x44 |
| #define PCI_GLI_9755_LFCLK GENMASK(14, 12) |
| #define PCI_GLI_9755_DMACLK BIT(29) |
| |
| #define PCI_GLI_9755_PLL 0x64 |
| #define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0) |
| #define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12) |
| #define PCI_GLI_9755_PLL_DIR BIT(15) |
| #define PCI_GLI_9755_PLLSSC_STEP GENMASK(28, 24) |
| #define PCI_GLI_9755_PLLSSC_EN BIT(31) |
| |
| #define PCI_GLI_9755_PLLSSC 0x68 |
| #define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0) |
| |
| #define GLI_MAX_TUNING_LOOP 40 |
| |
| /* Genesys Logic chipset */ |
| static inline void gl9750_wt_on(struct sdhci_host *host) |
| { |
| u32 wt_value; |
| u32 wt_enable; |
| |
| wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); |
| wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); |
| |
| if (wt_enable == GLI_9750_WT_EN_ON) |
| return; |
| |
| wt_value &= ~SDHCI_GLI_9750_WT_EN; |
| wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON); |
| |
| sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); |
| } |
| |
| static inline void gl9750_wt_off(struct sdhci_host *host) |
| { |
| u32 wt_value; |
| u32 wt_enable; |
| |
| wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); |
| wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); |
| |
| if (wt_enable == GLI_9750_WT_EN_OFF) |
| return; |
| |
| wt_value &= ~SDHCI_GLI_9750_WT_EN; |
| wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF); |
| |
| sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); |
| } |
| |
| static void gli_set_9750(struct sdhci_host *host) |
| { |
| u32 driving_value; |
| u32 pll_value; |
| u32 sw_ctrl_value; |
| u32 misc_value; |
| u32 parameter_value; |
| u32 control_value; |
| u16 ctrl2; |
| |
| gl9750_wt_on(host); |
| |
| driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING); |
| pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL); |
| sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL); |
| misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); |
| parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS); |
| control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL); |
| |
| driving_value &= ~(SDHCI_GLI_9750_DRIVING_1); |
| driving_value &= ~(SDHCI_GLI_9750_DRIVING_2); |
| driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1, |
| GLI_9750_DRIVING_1_VALUE); |
| driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2, |
| GLI_9750_DRIVING_2_VALUE); |
| driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST); |
| driving_value |= SDHCI_GLI_9750_SEL_2; |
| sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING); |
| |
| sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4; |
| sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4, |
| GLI_9750_SW_CTRL_4_VALUE); |
| sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL); |
| |
| /* reset the tuning flow after reinit and before starting tuning */ |
| pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV; |
| pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY; |
| pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV, |
| GLI_9750_PLL_TX2_INV_VALUE); |
| pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY, |
| GLI_9750_PLL_TX2_DLY_VALUE); |
| |
| misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV; |
| misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; |
| misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY; |
| misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV, |
| GLI_9750_MISC_TX1_INV_VALUE); |
| misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, |
| GLI_9750_MISC_RX_INV_VALUE); |
| misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY, |
| GLI_9750_MISC_TX1_DLY_VALUE); |
| |
| parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY; |
| parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY, |
| GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE); |
| |
| control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1; |
| control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2; |
| control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1, |
| GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE); |
| control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2, |
| GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE); |
| |
| sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL); |
| sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); |
| |
| /* disable tuned clk */ |
| ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; |
| sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); |
| |
| /* enable tuning parameters control */ |
| control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; |
| control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, |
| GLI_9750_TUNING_CONTROL_EN_ON); |
| sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); |
| |
| /* write tuning parameters */ |
| sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS); |
| |
| /* disable tuning parameters control */ |
| control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; |
| control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, |
| GLI_9750_TUNING_CONTROL_EN_OFF); |
| sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); |
| |
| /* clear tuned clk */ |
| ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; |
| sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); |
| |
| gl9750_wt_off(host); |
| } |
| |
| static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b) |
| { |
| u32 misc_value; |
| |
| gl9750_wt_on(host); |
| |
| misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); |
| misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; |
| if (b) { |
| misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, |
| GLI_9750_MISC_RX_INV_ON); |
| } else { |
| misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, |
| GLI_9750_MISC_RX_INV_OFF); |
| } |
| sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); |
| |
| gl9750_wt_off(host); |
| } |
| |
| static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode) |
| { |
| int i; |
| int rx_inv; |
| |
| for (rx_inv = 0; rx_inv < 2; rx_inv++) { |
| gli_set_9750_rx_inv(host, !!rx_inv); |
| sdhci_start_tuning(host); |
| |
| for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) { |
| u16 ctrl; |
| |
| sdhci_send_tuning(host, opcode); |
| |
| if (!host->tuning_done) { |
| sdhci_abort_tuning(host, opcode); |
| break; |
| } |
| |
| ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { |
| if (ctrl & SDHCI_CTRL_TUNED_CLK) |
| return 0; /* Success! */ |
| break; |
| } |
| } |
| } |
| if (!host->tuning_done) { |
| pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", |
| mmc_hostname(host->mmc)); |
| return -ETIMEDOUT; |
| } |
| |
| pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", |
| mmc_hostname(host->mmc)); |
| sdhci_reset_tuning(host); |
| |
| return -EAGAIN; |
| } |
| |
| static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) |
| { |
| host->mmc->retune_period = 0; |
| if (host->tuning_mode == SDHCI_TUNING_MODE_1) |
| host->mmc->retune_period = host->tuning_count; |
| |
| gli_set_9750(host); |
| host->tuning_err = __sdhci_execute_tuning_9750(host, opcode); |
| sdhci_end_tuning(host); |
| |
| return 0; |
| } |
| |
| static void gl9750_disable_ssc_pll(struct sdhci_host *host) |
| { |
| u32 pll; |
| |
| gl9750_wt_on(host); |
| pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); |
| pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN); |
| sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); |
| gl9750_wt_off(host); |
| } |
| |
| static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv) |
| { |
| u32 pll; |
| |
| gl9750_wt_on(host); |
| pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); |
| pll &= ~(SDHCI_GLI_9750_PLL_LDIV | |
| SDHCI_GLI_9750_PLL_PDIV | |
| SDHCI_GLI_9750_PLL_DIR); |
| pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) | |
| FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) | |
| FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir); |
| sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); |
| gl9750_wt_off(host); |
| |
| /* wait for pll stable */ |
| mdelay(1); |
| } |
| |
| static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm) |
| { |
| u32 pll; |
| u32 ssc; |
| |
| gl9750_wt_on(host); |
| pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); |
| ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC); |
| pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP | |
| SDHCI_GLI_9750_PLLSSC_EN); |
| ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM; |
| pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) | |
| FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable); |
| ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm); |
| sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC); |
| sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); |
| gl9750_wt_off(host); |
| } |
| |
| static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host) |
| { |
| /* set pll to 205MHz and enable ssc */ |
| gl9750_set_ssc(host, 0x1, 0x1F, 0xFFE7); |
| gl9750_set_pll(host, 0x1, 0x246, 0x0); |
| } |
| |
| static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock) |
| { |
| struct mmc_ios *ios = &host->mmc->ios; |
| u16 clk; |
| |
| host->mmc->actual_clock = 0; |
| |
| gl9750_disable_ssc_pll(host); |
| sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); |
| |
| if (clock == 0) |
| return; |
| |
| clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); |
| if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { |
| host->mmc->actual_clock = 205000000; |
| gl9750_set_ssc_pll_205mhz(host); |
| } |
| |
| sdhci_enable_clk(host, clk); |
| } |
| |
| static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot) |
| { |
| int ret; |
| |
| ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1, |
| PCI_IRQ_MSI | PCI_IRQ_MSIX); |
| if (ret < 0) { |
| pr_warn("%s: enable PCI MSI failed, error=%d\n", |
| mmc_hostname(slot->host->mmc), ret); |
| return; |
| } |
| |
| slot->host->irq = pci_irq_vector(slot->chip->pdev, 0); |
| } |
| |
| static inline void gl9755_wt_on(struct pci_dev *pdev) |
| { |
| u32 wt_value; |
| u32 wt_enable; |
| |
| pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); |
| wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); |
| |
| if (wt_enable == GLI_9755_WT_EN_ON) |
| return; |
| |
| wt_value &= ~PCI_GLI_9755_WT_EN; |
| wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON); |
| |
| pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); |
| } |
| |
| static inline void gl9755_wt_off(struct pci_dev *pdev) |
| { |
| u32 wt_value; |
| u32 wt_enable; |
| |
| pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); |
| wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); |
| |
| if (wt_enable == GLI_9755_WT_EN_OFF) |
| return; |
| |
| wt_value &= ~PCI_GLI_9755_WT_EN; |
| wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF); |
| |
| pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); |
| } |
| |
| static void gl9755_disable_ssc_pll(struct pci_dev *pdev) |
| { |
| u32 pll; |
| |
| gl9755_wt_on(pdev); |
| pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); |
| pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN); |
| pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); |
| gl9755_wt_off(pdev); |
| } |
| |
| static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv) |
| { |
| u32 pll; |
| |
| gl9755_wt_on(pdev); |
| pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); |
| pll &= ~(PCI_GLI_9755_PLL_LDIV | |
| PCI_GLI_9755_PLL_PDIV | |
| PCI_GLI_9755_PLL_DIR); |
| pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) | |
| FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) | |
| FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir); |
| pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); |
| gl9755_wt_off(pdev); |
| |
| /* wait for pll stable */ |
| mdelay(1); |
| } |
| |
| static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm) |
| { |
| u32 pll; |
| u32 ssc; |
| |
| gl9755_wt_on(pdev); |
| pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); |
| pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc); |
| pll &= ~(PCI_GLI_9755_PLLSSC_STEP | |
| PCI_GLI_9755_PLLSSC_EN); |
| ssc &= ~PCI_GLI_9755_PLLSSC_PPM; |
| pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) | |
| FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable); |
| ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm); |
| pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc); |
| pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); |
| gl9755_wt_off(pdev); |
| } |
| |
| static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev) |
| { |
| /* set pll to 205MHz and enable ssc */ |
| gl9755_set_ssc(pdev, 0x1, 0x1F, 0xFFE7); |
| gl9755_set_pll(pdev, 0x1, 0x246, 0x0); |
| } |
| |
| static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock) |
| { |
| struct sdhci_pci_slot *slot = sdhci_priv(host); |
| struct mmc_ios *ios = &host->mmc->ios; |
| struct pci_dev *pdev; |
| u16 clk; |
| |
| pdev = slot->chip->pdev; |
| host->mmc->actual_clock = 0; |
| |
| gl9755_disable_ssc_pll(pdev); |
| sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); |
| |
| if (clock == 0) |
| return; |
| |
| clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); |
| if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { |
| host->mmc->actual_clock = 205000000; |
| gl9755_set_ssc_pll_205mhz(pdev); |
| } |
| |
| sdhci_enable_clk(host, clk); |
| } |
| |
| static void gl9755_hw_setting(struct sdhci_pci_slot *slot) |
| { |
| struct pci_dev *pdev = slot->chip->pdev; |
| u32 value; |
| |
| gl9755_wt_on(pdev); |
| |
| pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value); |
| value &= ~PCI_GLI_9755_LFCLK; |
| value &= ~PCI_GLI_9755_DMACLK; |
| pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value); |
| |
| gl9755_wt_off(pdev); |
| } |
| |
| static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) |
| { |
| struct sdhci_host *host = slot->host; |
| |
| gli_pcie_enable_msi(slot); |
| slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; |
| sdhci_enable_v4_mode(host); |
| |
| return 0; |
| } |
| |
| static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) |
| { |
| struct sdhci_host *host = slot->host; |
| |
| gl9755_hw_setting(slot); |
| gli_pcie_enable_msi(slot); |
| slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; |
| sdhci_enable_v4_mode(host); |
| |
| return 0; |
| } |
| |
| static void sdhci_gli_voltage_switch(struct sdhci_host *host) |
| { |
| /* |
| * According to Section 3.6.1 signal voltage switch procedure in |
| * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as |
| * follows: |
| * (6) Set 1.8V Signal Enable in the Host Control 2 register. |
| * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this |
| * period. |
| * (8) If 1.8V Signal Enable is cleared by Host Controller, go to |
| * step (12). |
| * |
| * Wait 5ms after set 1.8V signal enable in Host Control 2 register |
| * to ensure 1.8V signal enable bit is set by GL9750/GL9755. |
| */ |
| usleep_range(5000, 5500); |
| } |
| |
| static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) |
| { |
| sdhci_reset(host, mask); |
| gli_set_9750(host); |
| } |
| |
| static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg) |
| { |
| u32 value; |
| |
| value = readl(host->ioaddr + reg); |
| if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff))) |
| value |= 0xc8; |
| |
| return value; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip) |
| { |
| struct sdhci_pci_slot *slot = chip->slots[0]; |
| |
| pci_free_irq_vectors(slot->chip->pdev); |
| gli_pcie_enable_msi(slot); |
| |
| return sdhci_pci_resume_host(chip); |
| } |
| |
| static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip) |
| { |
| struct sdhci_pci_slot *slot = chip->slots[0]; |
| int ret; |
| |
| ret = sdhci_pci_gli_resume(chip); |
| if (ret) |
| return ret; |
| |
| return cqhci_resume(slot->host->mmc); |
| } |
| |
| static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip) |
| { |
| struct sdhci_pci_slot *slot = chip->slots[0]; |
| int ret; |
| |
| ret = cqhci_suspend(slot->host->mmc); |
| if (ret) |
| return ret; |
| |
| return sdhci_suspend_host(slot->host); |
| } |
| #endif |
| |
| static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc, |
| struct mmc_ios *ios) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| u32 val; |
| |
| val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG); |
| if (ios->enhanced_strobe) |
| val |= SDHCI_GLI_9763E_HS400_ES_BIT; |
| else |
| val &= ~SDHCI_GLI_9763E_HS400_ES_BIT; |
| |
| sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG); |
| } |
| |
| static void sdhci_set_gl9763e_signaling(struct sdhci_host *host, |
| unsigned int timing) |
| { |
| u16 ctrl_2; |
| |
| ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; |
| if (timing == MMC_TIMING_MMC_HS200) |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR104; |
| else if (timing == MMC_TIMING_MMC_HS) |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR25; |
| else if (timing == MMC_TIMING_MMC_DDR52) |
| ctrl_2 |= SDHCI_CTRL_UHS_DDR50; |
| else if (timing == MMC_TIMING_MMC_HS400) |
| ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400; |
| |
| sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); |
| } |
| |
| static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc) |
| { |
| sdhci_dumpregs(mmc_priv(mmc)); |
| } |
| |
| static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc) |
| { |
| struct cqhci_host *cq_host = mmc->cqe_private; |
| u32 value; |
| |
| value = cqhci_readl(cq_host, CQHCI_CFG); |
| value |= CQHCI_ENABLE; |
| cqhci_writel(cq_host, value, CQHCI_CFG); |
| } |
| |
| static void sdhci_gl9763e_cqe_enable(struct mmc_host *mmc) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| |
| sdhci_writew(host, GLI_9763E_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE); |
| sdhci_cqe_enable(mmc); |
| } |
| |
| static u32 sdhci_gl9763e_cqhci_irq(struct sdhci_host *host, u32 intmask) |
| { |
| int cmd_error = 0; |
| int data_error = 0; |
| |
| if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) |
| return intmask; |
| |
| cqhci_irq(host->mmc, intmask, cmd_error, data_error); |
| |
| return 0; |
| } |
| |
| static void sdhci_gl9763e_cqe_post_disable(struct mmc_host *mmc) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| struct cqhci_host *cq_host = mmc->cqe_private; |
| u32 value; |
| |
| value = cqhci_readl(cq_host, CQHCI_CFG); |
| value &= ~CQHCI_ENABLE; |
| cqhci_writel(cq_host, value, CQHCI_CFG); |
| sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE); |
| } |
| |
| static const struct cqhci_host_ops sdhci_gl9763e_cqhci_ops = { |
| .enable = sdhci_gl9763e_cqe_enable, |
| .disable = sdhci_cqe_disable, |
| .dumpregs = sdhci_gl9763e_dumpregs, |
| .pre_enable = sdhci_gl9763e_cqe_pre_enable, |
| .post_disable = sdhci_gl9763e_cqe_post_disable, |
| }; |
| |
| static int gl9763e_add_host(struct sdhci_pci_slot *slot) |
| { |
| struct device *dev = &slot->chip->pdev->dev; |
| struct sdhci_host *host = slot->host; |
| struct cqhci_host *cq_host; |
| bool dma64; |
| int ret; |
| |
| ret = sdhci_setup_host(host); |
| if (ret) |
| return ret; |
| |
| cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL); |
| if (!cq_host) { |
| ret = -ENOMEM; |
| goto cleanup; |
| } |
| |
| cq_host->mmio = host->ioaddr + SDHCI_GLI_9763E_CQE_BASE_ADDR; |
| cq_host->ops = &sdhci_gl9763e_cqhci_ops; |
| |
| dma64 = host->flags & SDHCI_USE_64_BIT_DMA; |
| if (dma64) |
| cq_host->caps |= CQHCI_TASK_DESC_SZ_128; |
| |
| ret = cqhci_init(cq_host, host->mmc, dma64); |
| if (ret) |
| goto cleanup; |
| |
| ret = __sdhci_add_host(host); |
| if (ret) |
| goto cleanup; |
| |
| return 0; |
| |
| cleanup: |
| sdhci_cleanup_host(host); |
| return ret; |
| } |
| |
| static void sdhci_gl9763e_reset(struct sdhci_host *host, u8 mask) |
| { |
| if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) && |
| host->mmc->cqe_private) |
| cqhci_deactivate(host->mmc); |
| sdhci_reset(host, mask); |
| } |
| |
| static void gli_set_gl9763e(struct sdhci_pci_slot *slot) |
| { |
| struct pci_dev *pdev = slot->chip->pdev; |
| u32 value; |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); |
| value &= ~GLI_9763E_VHS_REV; |
| value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W); |
| pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value); |
| value |= GLI_9763E_SCR_AXI_REQ; |
| pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value); |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, &value); |
| value &= ~GLI_9763E_HS400_SLOW; |
| pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value); |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value); |
| value &= ~GLI_9763E_CFG2_L1DLY; |
| /* set ASPM L1 entry delay to 260us */ |
| value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MAX); |
| pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value); |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, &value); |
| value &= ~GLI_9763E_HS400_RXDLY; |
| value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5); |
| pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value); |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); |
| value &= ~GLI_9763E_VHS_REV; |
| value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R); |
| pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); |
| } |
| |
| static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot) |
| { |
| struct pci_dev *pdev = slot->chip->pdev; |
| struct sdhci_host *host = slot->host; |
| u32 value; |
| |
| host->mmc->caps |= MMC_CAP_8_BIT_DATA | |
| MMC_CAP_1_8V_DDR | |
| MMC_CAP_NONREMOVABLE; |
| host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR | |
| MMC_CAP2_HS400_1_8V | |
| MMC_CAP2_HS400_ES | |
| MMC_CAP2_NO_SDIO | |
| MMC_CAP2_NO_SD; |
| |
| pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value); |
| if (!(value & GLI_9763E_MB_CMDQ_OFF)) |
| if (value & GLI_9763E_MB_ERP_ON) |
| host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; |
| |
| gli_pcie_enable_msi(slot); |
| host->mmc_host_ops.hs400_enhanced_strobe = |
| gl9763e_hs400_enhanced_strobe; |
| gli_set_gl9763e(slot); |
| sdhci_enable_v4_mode(host); |
| |
| return 0; |
| } |
| |
| static const struct sdhci_ops sdhci_gl9755_ops = { |
| .set_clock = sdhci_gl9755_set_clock, |
| .enable_dma = sdhci_pci_enable_dma, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| .voltage_switch = sdhci_gli_voltage_switch, |
| }; |
| |
| const struct sdhci_pci_fixes sdhci_gl9755 = { |
| .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, |
| .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, |
| .probe_slot = gli_probe_slot_gl9755, |
| .ops = &sdhci_gl9755_ops, |
| #ifdef CONFIG_PM_SLEEP |
| .resume = sdhci_pci_gli_resume, |
| #endif |
| }; |
| |
| static const struct sdhci_ops sdhci_gl9750_ops = { |
| .read_l = sdhci_gl9750_readl, |
| .set_clock = sdhci_gl9750_set_clock, |
| .enable_dma = sdhci_pci_enable_dma, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_gl9750_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| .voltage_switch = sdhci_gli_voltage_switch, |
| .platform_execute_tuning = gl9750_execute_tuning, |
| }; |
| |
| const struct sdhci_pci_fixes sdhci_gl9750 = { |
| .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, |
| .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, |
| .probe_slot = gli_probe_slot_gl9750, |
| .ops = &sdhci_gl9750_ops, |
| #ifdef CONFIG_PM_SLEEP |
| .resume = sdhci_pci_gli_resume, |
| #endif |
| }; |
| |
| static const struct sdhci_ops sdhci_gl9763e_ops = { |
| .set_clock = sdhci_set_clock, |
| .enable_dma = sdhci_pci_enable_dma, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_gl9763e_reset, |
| .set_uhs_signaling = sdhci_set_gl9763e_signaling, |
| .voltage_switch = sdhci_gli_voltage_switch, |
| .irq = sdhci_gl9763e_cqhci_irq, |
| }; |
| |
| const struct sdhci_pci_fixes sdhci_gl9763e = { |
| .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, |
| .probe_slot = gli_probe_slot_gl9763e, |
| .ops = &sdhci_gl9763e_ops, |
| #ifdef CONFIG_PM_SLEEP |
| .resume = sdhci_cqhci_gli_resume, |
| .suspend = sdhci_cqhci_gli_suspend, |
| #endif |
| .add_host = gl9763e_add_host, |
| }; |