| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Phy drivers for Marvell platforms |
| # |
| config ARMADA375_USBCLUSTER_PHY |
| def_bool y |
| depends on MACH_ARMADA_375 || COMPILE_TEST |
| depends on OF && HAS_IOMEM |
| select GENERIC_PHY |
| |
| config PHY_BERLIN_SATA |
| tristate "Marvell Berlin SATA PHY driver" |
| depends on ARCH_BERLIN || COMPILE_TEST |
| depends on OF && HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support the SATA PHY on Marvell Berlin SoCs. |
| |
| config PHY_BERLIN_USB |
| tristate "Marvell Berlin USB PHY Driver" |
| depends on ARCH_BERLIN || COMPILE_TEST |
| depends on OF && HAS_IOMEM && RESET_CONTROLLER |
| select GENERIC_PHY |
| help |
| Enable this to support the USB PHY on Marvell Berlin SoCs. |
| |
| config PHY_MVEBU_A3700_COMPHY |
| tristate "Marvell A3700 comphy driver" |
| depends on ARCH_MVEBU || COMPILE_TEST |
| depends on OF |
| depends on HAVE_ARM_SMCCC |
| default y |
| select GENERIC_PHY |
| help |
| This driver allows to control the comphy, a hardware block providing |
| shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be |
| used by various controllers: Ethernet, SATA, USB3, PCIe. |
| |
| config PHY_MVEBU_A3700_UTMI |
| tristate "Marvell A3700 UTMI driver" |
| depends on ARCH_MVEBU || COMPILE_TEST |
| depends on OF |
| default y |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell A3700 UTMI PHY driver. |
| |
| config PHY_MVEBU_A38X_COMPHY |
| tristate "Marvell Armada 38x comphy driver" |
| depends on ARCH_MVEBU || COMPILE_TEST |
| depends on OF |
| select GENERIC_PHY |
| help |
| This driver allows to control the comphy, an hardware block providing |
| shared serdes PHYs on Marvell Armada 38x. Its serdes lanes can be |
| used by various controllers (Ethernet, sata, usb, PCIe...). |
| |
| config PHY_MVEBU_CP110_COMPHY |
| tristate "Marvell CP110 comphy driver" |
| depends on ARCH_MVEBU || COMPILE_TEST |
| depends on OF |
| depends on HAVE_ARM_SMCCC |
| select GENERIC_PHY |
| help |
| This driver allows to control the comphy, an hardware block providing |
| shared serdes PHYs on Marvell Armada 7k/8k (in the CP110). Its serdes |
| lanes can be used by various controllers (Ethernet, sata, usb, |
| PCIe...). |
| |
| config PHY_MVEBU_SATA |
| def_bool y |
| depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_PXA_28NM_HSIC |
| tristate "Marvell USB HSIC 28nm PHY Driver" |
| depends on HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell USB HSIC PHY driver for Marvell |
| SoC. This driver will do the PHY initialization and shutdown. |
| The PHY driver will be used by Marvell ehci driver. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_PXA_28NM_USB2 |
| tristate "Marvell USB 2.0 28nm PHY Driver" |
| depends on HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell USB 2.0 PHY driver for Marvell |
| SoC. This driver will do the PHY initialization and shutdown. |
| The PHY driver will be used by Marvell udc/ehci/otg driver. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_PXA_USB |
| tristate "Marvell PXA USB PHY Driver" |
| depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell PXA USB PHY driver for Marvell |
| SoC. This driver will do the PHY initialization and shutdown. |
| The PHY driver will be used by Marvell udc/ehci/otg driver. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_MMP3_USB |
| tristate "Marvell MMP3 USB PHY Driver" |
| depends on MACH_MMP3_DT || COMPILE_TEST |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell MMP3 USB PHY driver for Marvell |
| SoC. This driver will do the PHY initialization and shutdown. |
| The PHY driver will be used by Marvell udc/ehci/otg driver. |
| |
| To compile this driver as a module, choose M here. |
| |
| config PHY_MMP3_HSIC |
| tristate "Marvell MMP3 USB HSIC PHY Driver" |
| depends on MACH_MMP3_DT || COMPILE_TEST |
| select GENERIC_PHY |
| help |
| Enable this to support Marvell MMP3 USB HSIC PHY driver for |
| Marvell MMP3 SoC. This driver will be used my the Marvell EHCI |
| driver to initialize the interface to internal USB HSIC |
| components on MMP3-based boards. |
| |
| To compile this driver as a module, choose M here. |