| /* | 
 |  *  Maple (970 eval board) setup code | 
 |  * | 
 |  *  (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), | 
 |  *                     IBM Corp.  | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or | 
 |  *  modify it under the terms of the GNU General Public License | 
 |  *  as published by the Free Software Foundation; either version | 
 |  *  2 of the License, or (at your option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #undef DEBUG | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/export.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/unistd.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/user.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/string.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/major.h> | 
 | #include <linux/initrd.h> | 
 | #include <linux/vt_kern.h> | 
 | #include <linux/console.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/adb.h> | 
 | #include <linux/cuda.h> | 
 | #include <linux/pmu.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/root_dev.h> | 
 | #include <linux/serial.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/memblock.h> | 
 |  | 
 | #include <asm/processor.h> | 
 | #include <asm/sections.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/io.h> | 
 | #include <asm/pci-bridge.h> | 
 | #include <asm/iommu.h> | 
 | #include <asm/machdep.h> | 
 | #include <asm/dma.h> | 
 | #include <asm/cputable.h> | 
 | #include <asm/time.h> | 
 | #include <asm/mpic.h> | 
 | #include <asm/rtas.h> | 
 | #include <asm/udbg.h> | 
 | #include <asm/nvram.h> | 
 |  | 
 | #include "maple.h" | 
 |  | 
 | #ifdef DEBUG | 
 | #define DBG(fmt...) udbg_printf(fmt) | 
 | #else | 
 | #define DBG(fmt...) | 
 | #endif | 
 |  | 
 | static unsigned long maple_find_nvram_base(void) | 
 | { | 
 | 	struct device_node *rtcs; | 
 | 	unsigned long result = 0; | 
 |  | 
 | 	/* find NVRAM device */ | 
 | 	rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111"); | 
 | 	if (rtcs) { | 
 | 		struct resource r; | 
 | 		if (of_address_to_resource(rtcs, 0, &r)) { | 
 | 			printk(KERN_EMERG "Maple: Unable to translate NVRAM" | 
 | 			       " address\n"); | 
 | 			goto bail; | 
 | 		} | 
 | 		if (!(r.flags & IORESOURCE_IO)) { | 
 | 			printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n"); | 
 | 			goto bail; | 
 | 		} | 
 | 		result = r.start; | 
 | 	} else | 
 | 		printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); | 
 |  bail: | 
 | 	of_node_put(rtcs); | 
 | 	return result; | 
 | } | 
 |  | 
 | static void maple_restart(char *cmd) | 
 | { | 
 | 	unsigned int maple_nvram_base; | 
 | 	const unsigned int *maple_nvram_offset, *maple_nvram_command; | 
 | 	struct device_node *sp; | 
 |  | 
 | 	maple_nvram_base = maple_find_nvram_base(); | 
 | 	if (maple_nvram_base == 0) | 
 | 		goto fail; | 
 |  | 
 | 	/* find service processor device */ | 
 | 	sp = of_find_node_by_name(NULL, "service-processor"); | 
 | 	if (!sp) { | 
 | 		printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); | 
 | 		goto fail; | 
 | 	} | 
 | 	maple_nvram_offset = of_get_property(sp, "restart-addr", NULL); | 
 | 	maple_nvram_command = of_get_property(sp, "restart-value", NULL); | 
 | 	of_node_put(sp); | 
 |  | 
 | 	/* send command */ | 
 | 	outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset); | 
 | 	for (;;) ; | 
 |  fail: | 
 | 	printk(KERN_EMERG "Maple: Manual Restart Required\n"); | 
 | } | 
 |  | 
 | static void maple_power_off(void) | 
 | { | 
 | 	unsigned int maple_nvram_base; | 
 | 	const unsigned int *maple_nvram_offset, *maple_nvram_command; | 
 | 	struct device_node *sp; | 
 |  | 
 | 	maple_nvram_base = maple_find_nvram_base(); | 
 | 	if (maple_nvram_base == 0) | 
 | 		goto fail; | 
 |  | 
 | 	/* find service processor device */ | 
 | 	sp = of_find_node_by_name(NULL, "service-processor"); | 
 | 	if (!sp) { | 
 | 		printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); | 
 | 		goto fail; | 
 | 	} | 
 | 	maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL); | 
 | 	maple_nvram_command = of_get_property(sp, "power-off-value", NULL); | 
 | 	of_node_put(sp); | 
 |  | 
 | 	/* send command */ | 
 | 	outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset); | 
 | 	for (;;) ; | 
 |  fail: | 
 | 	printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); | 
 | } | 
 |  | 
 | static void maple_halt(void) | 
 | { | 
 | 	maple_power_off(); | 
 | } | 
 |  | 
 | #ifdef CONFIG_SMP | 
 | struct smp_ops_t maple_smp_ops = { | 
 | 	.probe		= smp_mpic_probe, | 
 | 	.message_pass	= smp_mpic_message_pass, | 
 | 	.kick_cpu	= smp_generic_kick_cpu, | 
 | 	.setup_cpu	= smp_mpic_setup_cpu, | 
 | 	.give_timebase	= smp_generic_give_timebase, | 
 | 	.take_timebase	= smp_generic_take_timebase, | 
 | }; | 
 | #endif /* CONFIG_SMP */ | 
 |  | 
 | static void __init maple_use_rtas_reboot_and_halt_if_present(void) | 
 | { | 
 | 	if (rtas_service_present("system-reboot") && | 
 | 	    rtas_service_present("power-off")) { | 
 | 		ppc_md.restart = rtas_restart; | 
 | 		ppc_md.power_off = rtas_power_off; | 
 | 		ppc_md.halt = rtas_halt; | 
 | 	} | 
 | } | 
 |  | 
 | void __init maple_setup_arch(void) | 
 | { | 
 | 	/* init to some ~sane value until calibrate_delay() runs */ | 
 | 	loops_per_jiffy = 50000000; | 
 |  | 
 | 	/* Setup SMP callback */ | 
 | #ifdef CONFIG_SMP | 
 | 	smp_ops = &maple_smp_ops; | 
 | #endif | 
 | 	/* Lookup PCI hosts */ | 
 |        	maple_pci_init(); | 
 |  | 
 | #ifdef CONFIG_DUMMY_CONSOLE | 
 | 	conswitchp = &dummy_con; | 
 | #endif | 
 | 	maple_use_rtas_reboot_and_halt_if_present(); | 
 |  | 
 | 	printk(KERN_DEBUG "Using native/NAP idle loop\n"); | 
 |  | 
 | 	mmio_nvram_init(); | 
 | } | 
 |  | 
 | /*  | 
 |  * Early initialization. | 
 |  */ | 
 | static void __init maple_init_early(void) | 
 | { | 
 | 	DBG(" -> maple_init_early\n"); | 
 |  | 
 | 	iommu_init_early_dart(); | 
 |  | 
 | 	DBG(" <- maple_init_early\n"); | 
 | } | 
 |  | 
 | /* | 
 |  * This is almost identical to pSeries and CHRP. We need to make that | 
 |  * code generic at one point, with appropriate bits in the device-tree to | 
 |  * identify the presence of an HT APIC | 
 |  */ | 
 | static void __init maple_init_IRQ(void) | 
 | { | 
 | 	struct device_node *root, *np, *mpic_node = NULL; | 
 | 	const unsigned int *opprop; | 
 | 	unsigned long openpic_addr = 0; | 
 | 	int naddr, n, i, opplen, has_isus = 0; | 
 | 	struct mpic *mpic; | 
 | 	unsigned int flags = 0; | 
 |  | 
 | 	/* Locate MPIC in the device-tree. Note that there is a bug | 
 | 	 * in Maple device-tree where the type of the controller is | 
 | 	 * open-pic and not interrupt-controller | 
 | 	 */ | 
 |  | 
 | 	for_each_node_by_type(np, "interrupt-controller") | 
 | 		if (of_device_is_compatible(np, "open-pic")) { | 
 | 			mpic_node = np; | 
 | 			break; | 
 | 		} | 
 | 	if (mpic_node == NULL) | 
 | 		for_each_node_by_type(np, "open-pic") { | 
 | 			mpic_node = np; | 
 | 			break; | 
 | 		} | 
 | 	if (mpic_node == NULL) { | 
 | 		printk(KERN_ERR | 
 | 		       "Failed to locate the MPIC interrupt controller\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Find address list in /platform-open-pic */ | 
 | 	root = of_find_node_by_path("/"); | 
 | 	naddr = of_n_addr_cells(root); | 
 | 	opprop = of_get_property(root, "platform-open-pic", &opplen); | 
 | 	if (opprop != 0) { | 
 | 		openpic_addr = of_read_number(opprop, naddr); | 
 | 		has_isus = (opplen > naddr); | 
 | 		printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n", | 
 | 		       openpic_addr, has_isus); | 
 | 	} | 
 |  | 
 | 	BUG_ON(openpic_addr == 0); | 
 |  | 
 | 	/* Check for a big endian MPIC */ | 
 | 	if (of_get_property(np, "big-endian", NULL) != NULL) | 
 | 		flags |= MPIC_BIG_ENDIAN; | 
 |  | 
 | 	/* XXX Maple specific bits */ | 
 | 	flags |= MPIC_U3_HT_IRQS; | 
 | 	/* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ | 
 | 	flags |= MPIC_BIG_ENDIAN; | 
 |  | 
 | 	/* Setup the openpic driver. More device-tree junks, we hard code no | 
 | 	 * ISUs for now. I'll have to revisit some stuffs with the folks doing | 
 | 	 * the firmware for those | 
 | 	 */ | 
 | 	mpic = mpic_alloc(mpic_node, openpic_addr, flags, | 
 | 			  /*has_isus ? 16 :*/ 0, 0, " MPIC     "); | 
 | 	BUG_ON(mpic == NULL); | 
 |  | 
 | 	/* Add ISUs */ | 
 | 	opplen /= sizeof(u32); | 
 | 	for (n = 0, i = naddr; i < opplen; i += naddr, n++) { | 
 | 		unsigned long isuaddr = of_read_number(opprop + i, naddr); | 
 | 		mpic_assign_isu(mpic, n, isuaddr); | 
 | 	} | 
 |  | 
 | 	/* All ISUs are setup, complete initialization */ | 
 | 	mpic_init(mpic); | 
 | 	ppc_md.get_irq = mpic_get_irq; | 
 | 	of_node_put(mpic_node); | 
 | 	of_node_put(root); | 
 | } | 
 |  | 
 | static void __init maple_progress(char *s, unsigned short hex) | 
 | { | 
 | 	printk("*** %04x : %s\n", hex, s ? s : ""); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Called very early, MMU is off, device-tree isn't unflattened | 
 |  */ | 
 | static int __init maple_probe(void) | 
 | { | 
 | 	unsigned long root = of_get_flat_dt_root(); | 
 |  | 
 | 	if (!of_flat_dt_is_compatible(root, "Momentum,Maple") && | 
 | 	    !of_flat_dt_is_compatible(root, "Momentum,Apache")) | 
 | 		return 0; | 
 | 	/* | 
 | 	 * On U3, the DART (iommu) must be allocated now since it | 
 | 	 * has an impact on htab_initialize (due to the large page it | 
 | 	 * occupies having to be broken up so the DART itself is not | 
 | 	 * part of the cacheable linar mapping | 
 | 	 */ | 
 | 	alloc_dart_table(); | 
 |  | 
 | 	hpte_init_native(); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | define_machine(maple) { | 
 | 	.name			= "Maple", | 
 | 	.probe			= maple_probe, | 
 | 	.setup_arch		= maple_setup_arch, | 
 | 	.init_early		= maple_init_early, | 
 | 	.init_IRQ		= maple_init_IRQ, | 
 | 	.pci_irq_fixup		= maple_pci_irq_fixup, | 
 | 	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq, | 
 | 	.restart		= maple_restart, | 
 | 	.power_off		= maple_power_off, | 
 | 	.halt			= maple_halt, | 
 |        	.get_boot_time		= maple_get_boot_time, | 
 |        	.set_rtc_time		= maple_set_rtc_time, | 
 |        	.get_rtc_time		= maple_get_rtc_time, | 
 |       	.calibrate_decr		= generic_calibrate_decr, | 
 | 	.progress		= maple_progress, | 
 | 	.power_save		= power4_idle, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_EDAC | 
 | /* | 
 |  * Register a platform device for CPC925 memory controller on | 
 |  * all boards with U3H (CPC925) bridge. | 
 |  */ | 
 | static int __init maple_cpc925_edac_setup(void) | 
 | { | 
 | 	struct platform_device *pdev; | 
 | 	struct device_node *np = NULL; | 
 | 	struct resource r; | 
 | 	int ret; | 
 | 	volatile void __iomem *mem; | 
 | 	u32 rev; | 
 |  | 
 | 	np = of_find_node_by_type(NULL, "memory-controller"); | 
 | 	if (!np) { | 
 | 		printk(KERN_ERR "%s: Unable to find memory-controller node\n", | 
 | 			__func__); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	ret = of_address_to_resource(np, 0, &r); | 
 | 	of_node_put(np); | 
 |  | 
 | 	if (ret < 0) { | 
 | 		printk(KERN_ERR "%s: Unable to get memory-controller reg\n", | 
 | 			__func__); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	mem = ioremap(r.start, resource_size(&r)); | 
 | 	if (!mem) { | 
 | 		printk(KERN_ERR "%s: Unable to map memory-controller memory\n", | 
 | 				__func__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	rev = __raw_readl(mem); | 
 | 	iounmap(mem); | 
 |  | 
 | 	if (rev < 0x34 || rev > 0x3f) { /* U3H */ | 
 | 		printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n", | 
 | 			__func__, rev); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1); | 
 | 	if (IS_ERR(pdev)) | 
 | 		return PTR_ERR(pdev); | 
 |  | 
 | 	printk(KERN_INFO "%s: CPC925 platform device created\n", __func__); | 
 |  | 
 | 	return 0; | 
 | } | 
 | machine_device_initcall(maple, maple_cpc925_edac_setup); | 
 | #endif |