|  | /* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $ | 
|  | * viking.h:  Defines specific to the GNU/Viking MBUS module. | 
|  | *            This is SRMMU stuff. | 
|  | * | 
|  | * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) | 
|  | */ | 
|  | #ifndef _SPARC_VIKING_H | 
|  | #define _SPARC_VIKING_H | 
|  |  | 
|  | #include <asm/asi.h> | 
|  | #include <asm/mxcc.h> | 
|  | #include <asm/pgtsrmmu.h> | 
|  |  | 
|  | /* Bits in the SRMMU control register for GNU/Viking modules. | 
|  | * | 
|  | * ----------------------------------------------------------- | 
|  | * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME| | 
|  | * ----------------------------------------------------------- | 
|  | *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0 | 
|  | * | 
|  | * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache | 
|  | *                            1 = Twalks are cacheable in E-cache | 
|  | * | 
|  | * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present | 
|  | * and never caches them internally (or so states the docs).  Therefore | 
|  | * for machines lacking an E-cache (ie. in MBUS mode) this bit must | 
|  | * remain cleared. | 
|  | * | 
|  | * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable | 
|  | *                            1 = Passthru physical accesses cacheable | 
|  | * | 
|  | * This indicates whether accesses are cacheable when no cachable bit | 
|  | * is present in the pte when the processor is in boot-mode or the | 
|  | * access does not need pte's for translation (ie. pass-thru ASI's). | 
|  | * "Cachable" is only referring to E-cache (if present) and not the | 
|  | * on chip split I/D caches of the GNU/Viking. | 
|  | * | 
|  | * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on | 
|  | * | 
|  | * This enables snooping on the GNU/Viking bus.  This must be on | 
|  | * for the hardware cache consistency mechanisms of the GNU/Viking | 
|  | * to work at all.  On non-mxcc GNU/Viking modules the split I/D | 
|  | * caches will snoop regardless of whether they are enabled, this | 
|  | * takes care of the case where the I or D or both caches are turned | 
|  | * off yet still contain valid data.  Note also that this bit does | 
|  | * not affect GNU/Viking store-buffer snoops, those happen if the | 
|  | * store-buffer is enabled no matter what. | 
|  | * | 
|  | * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode | 
|  | * | 
|  | * This indicates whether the GNU/Viking is in boot-mode or not, | 
|  | * if it is then all instruction fetch physical addresses are | 
|  | * computed as 0xff0000000 + low 28 bits of requested address. | 
|  | * GNU/Viking boot-mode does not affect data accesses.  Also, | 
|  | * in boot mode instruction accesses bypass the split on chip I/D | 
|  | * caches, they may be cached by the GNU/MXCC if present and enabled. | 
|  | * | 
|  | * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode | 
|  | * | 
|  | * This indicated the GNU/Viking configuration present.  If in | 
|  | * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is | 
|  | * not then the GNU/Viking is on a module VBUS connected directly | 
|  | * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected | 
|  | * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d). | 
|  | * | 
|  | * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on | 
|  | * | 
|  | * The GNU/Viking store buffer allows the chip to continue execution | 
|  | * after a store even if the data cannot be placed in one of the | 
|  | * caches during that cycle.  If disabled, all stores operations | 
|  | * occur synchronously. | 
|  | * | 
|  | * IC: Instruction Cache -- 0 = off, 1 = on | 
|  | * DC: Data Cache -- 0 = off, 1 = 0n | 
|  | * | 
|  | * These bits enable the on-cpu GNU/Viking split I/D caches.  Note, | 
|  | * as mentioned above, these caches will snoop the bus in GNU/MBUS | 
|  | * configurations even when disabled to avoid data corruption. | 
|  | * | 
|  | * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap | 
|  | * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define VIKING_MMUENABLE    0x00000001 | 
|  | #define VIKING_NOFAULT      0x00000002 | 
|  | #define VIKING_PSO          0x00000080 | 
|  | #define VIKING_DCENABLE     0x00000100   /* Enable data cache */ | 
|  | #define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */ | 
|  | #define VIKING_SBENABLE     0x00000400   /* Enable store buffer */ | 
|  | #define VIKING_MMODE        0x00000800   /* MBUS mode */ | 
|  | #define VIKING_PCENABLE     0x00001000   /* Enable parity checking */ | 
|  | #define VIKING_BMODE        0x00002000 | 
|  | #define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */ | 
|  | #define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */ | 
|  | #define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */ | 
|  | #define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */ | 
|  |  | 
|  | /* | 
|  | * GNU/Viking Breakpoint Action Register fields. | 
|  | */ | 
|  | #define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */ | 
|  |  | 
|  | /* | 
|  | * GNU/Viking Cache Tags. | 
|  | */ | 
|  | #define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */ | 
|  | #define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */ | 
|  | #define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */ | 
|  |  | 
|  | #ifndef __ASSEMBLY__ | 
|  |  | 
|  | static inline void viking_flush_icache(void) | 
|  | { | 
|  | __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" | 
|  | : /* no outputs */ | 
|  | : "i" (ASI_M_IC_FLCLEAR) | 
|  | : "memory"); | 
|  | } | 
|  |  | 
|  | static inline void viking_flush_dcache(void) | 
|  | { | 
|  | __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" | 
|  | : /* no outputs */ | 
|  | : "i" (ASI_M_DC_FLCLEAR) | 
|  | : "memory"); | 
|  | } | 
|  |  | 
|  | static inline void viking_unlock_icache(void) | 
|  | { | 
|  | __asm__ __volatile__("sta %%g0, [%0] %1\n\t" | 
|  | : /* no outputs */ | 
|  | : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR) | 
|  | : "memory"); | 
|  | } | 
|  |  | 
|  | static inline void viking_unlock_dcache(void) | 
|  | { | 
|  | __asm__ __volatile__("sta %%g0, [%0] %1\n\t" | 
|  | : /* no outputs */ | 
|  | : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR) | 
|  | : "memory"); | 
|  | } | 
|  |  | 
|  | static inline void viking_set_bpreg(unsigned long regval) | 
|  | { | 
|  | __asm__ __volatile__("sta %0, [%%g0] %1\n\t" | 
|  | : /* no outputs */ | 
|  | : "r" (regval), "i" (ASI_M_ACTION) | 
|  | : "memory"); | 
|  | } | 
|  |  | 
|  | static inline unsigned long viking_get_bpreg(void) | 
|  | { | 
|  | unsigned long regval; | 
|  |  | 
|  | __asm__ __volatile__("lda [%%g0] %1, %0\n\t" | 
|  | : "=r" (regval) | 
|  | : "i" (ASI_M_ACTION)); | 
|  | return regval; | 
|  | } | 
|  |  | 
|  | static inline void viking_get_dcache_ptag(int set, int block, | 
|  | unsigned long *data) | 
|  | { | 
|  | unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) | | 
|  | 0x80000000; | 
|  | unsigned long info, page; | 
|  |  | 
|  | __asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t" | 
|  | "or %%g0, %%g2, %0\n\t" | 
|  | "or %%g0, %%g3, %1\n\t" | 
|  | : "=r" (info), "=r" (page) | 
|  | : "r" (ptag), "i" (ASI_M_DATAC_TAG) | 
|  | : "g2", "g3"); | 
|  | data[0] = info; | 
|  | data[1] = page; | 
|  | } | 
|  |  | 
|  | static inline void viking_mxcc_turn_off_parity(unsigned long *mregp, | 
|  | unsigned long *mxcc_cregp) | 
|  | { | 
|  | unsigned long mreg = *mregp; | 
|  | unsigned long mxcc_creg = *mxcc_cregp; | 
|  |  | 
|  | mreg &= ~(VIKING_PCENABLE); | 
|  | mxcc_creg &= ~(MXCC_CTL_PARE); | 
|  |  | 
|  | __asm__ __volatile__ ("set 1f, %%g2\n\t" | 
|  | "andcc %%g2, 4, %%g0\n\t" | 
|  | "bne 2f\n\t" | 
|  | " nop\n" | 
|  | "1:\n\t" | 
|  | "sta %0, [%%g0] %3\n\t" | 
|  | "sta %1, [%2] %4\n\t" | 
|  | "b 1f\n\t" | 
|  | " nop\n\t" | 
|  | "nop\n" | 
|  | "2:\n\t" | 
|  | "sta %0, [%%g0] %3\n\t" | 
|  | "sta %1, [%2] %4\n" | 
|  | "1:\n\t" | 
|  | : /* no output */ | 
|  | : "r" (mreg), "r" (mxcc_creg), | 
|  | "r" (MXCC_CREG), "i" (ASI_M_MMUREGS), | 
|  | "i" (ASI_M_MXCC) | 
|  | : "g2", "memory", "cc"); | 
|  | *mregp = mreg; | 
|  | *mxcc_cregp = mxcc_creg; | 
|  | } | 
|  |  | 
|  | static inline unsigned long viking_hwprobe(unsigned long vaddr) | 
|  | { | 
|  | unsigned long val; | 
|  |  | 
|  | vaddr &= PAGE_MASK; | 
|  | /* Probe all MMU entries. */ | 
|  | __asm__ __volatile__("lda [%1] %2, %0\n\t" | 
|  | : "=r" (val) | 
|  | : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); | 
|  | if (!val) | 
|  | return 0; | 
|  |  | 
|  | /* Probe region. */ | 
|  | __asm__ __volatile__("lda [%1] %2, %0\n\t" | 
|  | : "=r" (val) | 
|  | : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE)); | 
|  | if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { | 
|  | vaddr &= ~SRMMU_PGDIR_MASK; | 
|  | vaddr >>= PAGE_SHIFT; | 
|  | return val | (vaddr << 8); | 
|  | } | 
|  |  | 
|  | /* Probe segment. */ | 
|  | __asm__ __volatile__("lda [%1] %2, %0\n\t" | 
|  | : "=r" (val) | 
|  | : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE)); | 
|  | if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { | 
|  | vaddr &= ~SRMMU_REAL_PMD_MASK; | 
|  | vaddr >>= PAGE_SHIFT; | 
|  | return val | (vaddr << 8); | 
|  | } | 
|  |  | 
|  | /* Probe page. */ | 
|  | __asm__ __volatile__("lda [%1] %2, %0\n\t" | 
|  | : "=r" (val) | 
|  | : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE)); | 
|  | return val; | 
|  | } | 
|  |  | 
|  | #endif /* !__ASSEMBLY__ */ | 
|  |  | 
|  | #endif /* !(_SPARC_VIKING_H) */ |