| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor |
| |
| maintainers: |
| - Michael Hennerich <michael.hennerich@analog.com> |
| - Beniamin Bia <beniamin.bia@analog.com> |
| |
| description: | |
| Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor |
| https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf |
| |
| properties: |
| compatible: |
| enum: |
| - adi,adm1177 |
| |
| reg: |
| maxItems: 1 |
| |
| avcc-supply: |
| description: |
| Phandle to the Avcc power supply |
| |
| shunt-resistor-micro-ohms: |
| description: |
| The value of curent sense resistor in microohms. If not provided, |
| the current reading and overcurrent alert is disabled. |
| |
| adi,shutdown-threshold-microamp: |
| description: |
| Specifies the current level at which an over current alert occurs. |
| If not provided, the overcurrent alert is configured to max ADC range |
| based on shunt-resistor-micro-ohms. |
| |
| adi,vrange-high-enable: |
| description: |
| Specifies which internal voltage divider to be used. A 1 selects |
| a 7:2 voltage divider while a 0 selects a 14:1 voltage divider. |
| type: boolean |
| |
| required: |
| - compatible |
| - reg |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pwmon@5a { |
| compatible = "adi,adm1177"; |
| reg = <0x5a>; |
| shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ |
| adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ |
| adi,vrange-high-enable; |
| }; |
| }; |
| ... |
