| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * sleep.c - x86-specific ACPI sleep support. |
| * |
| * Copyright (C) 2001-2003 Patrick Mochel |
| * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/memblock.h> |
| #include <linux/dmi.h> |
| #include <linux/cpumask.h> |
| #include <asm/segment.h> |
| #include <asm/desc.h> |
| #include <asm/pgtable.h> |
| #include <asm/cacheflush.h> |
| #include <asm/realmode.h> |
| |
| #include <linux/ftrace.h> |
| #include "../../realmode/rm/wakeup.h" |
| #include "sleep.h" |
| |
| unsigned long acpi_realmode_flags; |
| |
| #if defined(CONFIG_SMP) && defined(CONFIG_64BIT) |
| static char temp_stack[4096]; |
| #endif |
| |
| /** |
| * acpi_get_wakeup_address - provide physical address for S3 wakeup |
| * |
| * Returns the physical address where the kernel should be resumed after the |
| * system awakes from S3, e.g. for programming into the firmware waking vector. |
| */ |
| unsigned long acpi_get_wakeup_address(void) |
| { |
| return ((unsigned long)(real_mode_header->wakeup_start)); |
| } |
| |
| /** |
| * x86_acpi_enter_sleep_state - enter sleep state |
| * @state: Sleep state to enter. |
| * |
| * Wrapper around acpi_enter_sleep_state() to be called by assmebly. |
| */ |
| acpi_status asmlinkage __visible x86_acpi_enter_sleep_state(u8 state) |
| { |
| return acpi_enter_sleep_state(state); |
| } |
| |
| /** |
| * x86_acpi_suspend_lowlevel - save kernel state |
| * |
| * Create an identity mapped page table and copy the wakeup routine to |
| * low memory. |
| */ |
| int x86_acpi_suspend_lowlevel(void) |
| { |
| struct wakeup_header *header = |
| (struct wakeup_header *) __va(real_mode_header->wakeup_header); |
| |
| if (header->signature != WAKEUP_HEADER_SIGNATURE) { |
| printk(KERN_ERR "wakeup header does not match\n"); |
| return -EINVAL; |
| } |
| |
| header->video_mode = saved_video_mode; |
| |
| header->pmode_behavior = 0; |
| |
| #ifndef CONFIG_64BIT |
| native_store_gdt((struct desc_ptr *)&header->pmode_gdt); |
| |
| /* |
| * We have to check that we can write back the value, and not |
| * just read it. At least on 90 nm Pentium M (Family 6, Model |
| * 13), reading an invalid MSR is not guaranteed to trap, see |
| * Erratum X4 in "Intel Pentium M Processor on 90 nm Process |
| * with 2-MB L2 Cache and IntelĀ® Processor A100 and A110 on 90 |
| * nm process with 512-KB L2 Cache Specification Update". |
| */ |
| if (!rdmsr_safe(MSR_EFER, |
| &header->pmode_efer_low, |
| &header->pmode_efer_high) && |
| !wrmsr_safe(MSR_EFER, |
| header->pmode_efer_low, |
| header->pmode_efer_high)) |
| header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER); |
| #endif /* !CONFIG_64BIT */ |
| |
| header->pmode_cr0 = read_cr0(); |
| if (__this_cpu_read(cpu_info.cpuid_level) >= 0) { |
| header->pmode_cr4 = __read_cr4(); |
| header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_CR4); |
| } |
| if (!rdmsr_safe(MSR_IA32_MISC_ENABLE, |
| &header->pmode_misc_en_low, |
| &header->pmode_misc_en_high) && |
| !wrmsr_safe(MSR_IA32_MISC_ENABLE, |
| header->pmode_misc_en_low, |
| header->pmode_misc_en_high)) |
| header->pmode_behavior |= |
| (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE); |
| header->realmode_flags = acpi_realmode_flags; |
| header->real_magic = 0x12345678; |
| |
| #ifndef CONFIG_64BIT |
| header->pmode_entry = (u32)&wakeup_pmode_return; |
| header->pmode_cr3 = (u32)__pa_symbol(initial_page_table); |
| saved_magic = 0x12345678; |
| #else /* CONFIG_64BIT */ |
| #ifdef CONFIG_SMP |
| initial_stack = (unsigned long)temp_stack + sizeof(temp_stack); |
| early_gdt_descr.address = |
| (unsigned long)get_cpu_gdt_rw(smp_processor_id()); |
| initial_gs = per_cpu_offset(smp_processor_id()); |
| #endif |
| initial_code = (unsigned long)wakeup_long64; |
| saved_magic = 0x123456789abcdef0L; |
| #endif /* CONFIG_64BIT */ |
| |
| /* |
| * Pause/unpause graph tracing around do_suspend_lowlevel as it has |
| * inconsistent call/return info after it jumps to the wakeup vector. |
| */ |
| pause_graph_tracing(); |
| do_suspend_lowlevel(); |
| unpause_graph_tracing(); |
| return 0; |
| } |
| |
| static int __init acpi_sleep_setup(char *str) |
| { |
| while ((str != NULL) && (*str != '\0')) { |
| if (strncmp(str, "s3_bios", 7) == 0) |
| acpi_realmode_flags |= 1; |
| if (strncmp(str, "s3_mode", 7) == 0) |
| acpi_realmode_flags |= 2; |
| if (strncmp(str, "s3_beep", 7) == 0) |
| acpi_realmode_flags |= 4; |
| #ifdef CONFIG_HIBERNATION |
| if (strncmp(str, "s4_nohwsig", 10) == 0) |
| acpi_no_s4_hw_signature(); |
| #endif |
| if (strncmp(str, "nonvs", 5) == 0) |
| acpi_nvs_nosave(); |
| if (strncmp(str, "nonvs_s3", 8) == 0) |
| acpi_nvs_nosave_s3(); |
| if (strncmp(str, "old_ordering", 12) == 0) |
| acpi_old_suspend_ordering(); |
| if (strncmp(str, "nobl", 4) == 0) |
| acpi_sleep_no_blacklist(); |
| str = strchr(str, ','); |
| if (str != NULL) |
| str += strspn(str, ", \t"); |
| } |
| return 1; |
| } |
| |
| __setup("acpi_sleep=", acpi_sleep_setup); |