| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * HD-audio stream operations |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/export.h> |
| #include <linux/clocksource.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/hdaudio.h> |
| #include <sound/hda_register.h> |
| #include "trace.h" |
| |
| /** |
| * snd_hdac_get_stream_stripe_ctl - get stripe control value |
| * @bus: HD-audio core bus |
| * @substream: PCM substream |
| */ |
| int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| unsigned int channels = runtime->channels, |
| rate = runtime->rate, |
| bits_per_sample = runtime->sample_bits, |
| max_sdo_lines, value, sdo_line; |
| |
| /* T_AZA_GCAP_NSDO is 1:2 bitfields in GCAP */ |
| max_sdo_lines = snd_hdac_chip_readl(bus, GCAP) & AZX_GCAP_NSDO; |
| |
| /* following is from HD audio spec */ |
| for (sdo_line = max_sdo_lines; sdo_line > 0; sdo_line >>= 1) { |
| if (rate > 48000) |
| value = (channels * bits_per_sample * |
| (rate / 48000)) / sdo_line; |
| else |
| value = (channels * bits_per_sample) / sdo_line; |
| |
| if (value >= 8) |
| break; |
| } |
| |
| /* stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines */ |
| return sdo_line >> 1; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_get_stream_stripe_ctl); |
| |
| /** |
| * snd_hdac_stream_init - initialize each stream (aka device) |
| * @bus: HD-audio core bus |
| * @azx_dev: HD-audio core stream object to initialize |
| * @idx: stream index number |
| * @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE) |
| * @tag: the tag id to assign |
| * |
| * Assign the starting bdl address to each stream (device) and initialize. |
| */ |
| void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, |
| int idx, int direction, int tag) |
| { |
| azx_dev->bus = bus; |
| /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ |
| azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); |
| /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ |
| azx_dev->sd_int_sta_mask = 1 << idx; |
| azx_dev->index = idx; |
| azx_dev->direction = direction; |
| azx_dev->stream_tag = tag; |
| snd_hdac_dsp_lock_init(azx_dev); |
| list_add_tail(&azx_dev->list, &bus->stream_list); |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_init); |
| |
| /** |
| * snd_hdac_stream_start - start a stream |
| * @azx_dev: HD-audio core stream to start |
| * @fresh_start: false = wallclock timestamp relative to period wallclock |
| * |
| * Start a stream, set start_wallclk and set the running flag. |
| */ |
| void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| int stripe_ctl; |
| |
| trace_snd_hdac_stream_start(bus, azx_dev); |
| |
| azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK); |
| if (!fresh_start) |
| azx_dev->start_wallclk -= azx_dev->period_wallclk; |
| |
| /* enable SIE */ |
| snd_hdac_chip_updatel(bus, INTCTL, |
| 1 << azx_dev->index, |
| 1 << azx_dev->index); |
| /* set stripe control */ |
| if (azx_dev->stripe) { |
| if (azx_dev->substream) |
| stripe_ctl = snd_hdac_get_stream_stripe_ctl(bus, azx_dev->substream); |
| else |
| stripe_ctl = 0; |
| snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, |
| stripe_ctl); |
| } |
| /* set DMA start and interrupt mask */ |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, |
| 0, SD_CTL_DMA_START | SD_INT_MASK); |
| azx_dev->running = true; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_start); |
| |
| /** |
| * snd_hdac_stream_clear - stop a stream DMA |
| * @azx_dev: HD-audio core stream to stop |
| */ |
| void snd_hdac_stream_clear(struct hdac_stream *azx_dev) |
| { |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, |
| SD_CTL_DMA_START | SD_INT_MASK, 0); |
| snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ |
| if (azx_dev->stripe) |
| snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0); |
| azx_dev->running = false; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_clear); |
| |
| /** |
| * snd_hdac_stream_stop - stop a stream |
| * @azx_dev: HD-audio core stream to stop |
| * |
| * Stop a stream DMA and disable stream interrupt |
| */ |
| void snd_hdac_stream_stop(struct hdac_stream *azx_dev) |
| { |
| trace_snd_hdac_stream_stop(azx_dev->bus, azx_dev); |
| |
| snd_hdac_stream_clear(azx_dev); |
| /* disable SIE */ |
| snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0); |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_stop); |
| |
| /** |
| * snd_hdac_stream_reset - reset a stream |
| * @azx_dev: HD-audio core stream to reset |
| */ |
| void snd_hdac_stream_reset(struct hdac_stream *azx_dev) |
| { |
| unsigned char val; |
| int timeout; |
| |
| snd_hdac_stream_clear(azx_dev); |
| |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); |
| udelay(3); |
| timeout = 300; |
| do { |
| val = snd_hdac_stream_readb(azx_dev, SD_CTL) & |
| SD_CTL_STREAM_RESET; |
| if (val) |
| break; |
| } while (--timeout); |
| val &= ~SD_CTL_STREAM_RESET; |
| snd_hdac_stream_writeb(azx_dev, SD_CTL, val); |
| udelay(3); |
| |
| timeout = 300; |
| /* waiting for hardware to report that the stream is out of reset */ |
| do { |
| val = snd_hdac_stream_readb(azx_dev, SD_CTL) & |
| SD_CTL_STREAM_RESET; |
| if (!val) |
| break; |
| } while (--timeout); |
| |
| /* reset first position - may not be synced with hw at this time */ |
| if (azx_dev->posbuf) |
| *azx_dev->posbuf = 0; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_reset); |
| |
| /** |
| * snd_hdac_stream_setup - set up the SD for streaming |
| * @azx_dev: HD-audio core stream to set up |
| */ |
| int snd_hdac_stream_setup(struct hdac_stream *azx_dev) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| struct snd_pcm_runtime *runtime; |
| unsigned int val; |
| |
| if (azx_dev->substream) |
| runtime = azx_dev->substream->runtime; |
| else |
| runtime = NULL; |
| /* make sure the run bit is zero for SD */ |
| snd_hdac_stream_clear(azx_dev); |
| /* program the stream_tag */ |
| val = snd_hdac_stream_readl(azx_dev, SD_CTL); |
| val = (val & ~SD_CTL_STREAM_TAG_MASK) | |
| (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT); |
| if (!bus->snoop) |
| val |= SD_CTL_TRAFFIC_PRIO; |
| snd_hdac_stream_writel(azx_dev, SD_CTL, val); |
| |
| /* program the length of samples in cyclic buffer */ |
| snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize); |
| |
| /* program the stream format */ |
| /* this value needs to be the same as the one programmed */ |
| snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val); |
| |
| /* program the stream LVI (last valid index) of the BDL */ |
| snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1); |
| |
| /* program the BDL address */ |
| /* lower BDL address */ |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr); |
| /* upper BDL address */ |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, |
| upper_32_bits(azx_dev->bdl.addr)); |
| |
| /* enable the position buffer */ |
| if (bus->use_posbuf && bus->posbuf.addr) { |
| if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE)) |
| snd_hdac_chip_writel(bus, DPLBASE, |
| (u32)bus->posbuf.addr | AZX_DPLBASE_ENABLE); |
| } |
| |
| /* set the interrupt enable bits in the descriptor control register */ |
| snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK); |
| |
| azx_dev->fifo_size = snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1; |
| |
| /* when LPIB delay correction gives a small negative value, |
| * we ignore it; currently set the threshold statically to |
| * 64 frames |
| */ |
| if (runtime && runtime->period_size > 64) |
| azx_dev->delay_negative_threshold = |
| -frames_to_bytes(runtime, 64); |
| else |
| azx_dev->delay_negative_threshold = 0; |
| |
| /* wallclk has 24Mhz clock source */ |
| if (runtime) |
| azx_dev->period_wallclk = (((runtime->period_size * 24000) / |
| runtime->rate) * 1000); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_setup); |
| |
| /** |
| * snd_hdac_stream_cleanup - cleanup a stream |
| * @azx_dev: HD-audio core stream to clean up |
| */ |
| void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev) |
| { |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| snd_hdac_stream_writel(azx_dev, SD_CTL, 0); |
| azx_dev->bufsize = 0; |
| azx_dev->period_bytes = 0; |
| azx_dev->format_val = 0; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup); |
| |
| /** |
| * snd_hdac_stream_assign - assign a stream for the PCM |
| * @bus: HD-audio core bus |
| * @substream: PCM substream to assign |
| * |
| * Look for an unused stream for the given PCM substream, assign it |
| * and return the stream object. If no stream is free, returns NULL. |
| * The function tries to keep using the same stream object when it's used |
| * beforehand. Also, when bus->reverse_assign flag is set, the last free |
| * or matching entry is returned. This is needed for some strange codecs. |
| */ |
| struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, |
| struct snd_pcm_substream *substream) |
| { |
| struct hdac_stream *azx_dev; |
| struct hdac_stream *res = NULL; |
| |
| /* make a non-zero unique key for the substream */ |
| int key = (substream->pcm->device << 16) | (substream->number << 2) | |
| (substream->stream + 1); |
| |
| list_for_each_entry(azx_dev, &bus->stream_list, list) { |
| if (azx_dev->direction != substream->stream) |
| continue; |
| if (azx_dev->opened) |
| continue; |
| if (azx_dev->assigned_key == key) { |
| res = azx_dev; |
| break; |
| } |
| if (!res || bus->reverse_assign) |
| res = azx_dev; |
| } |
| if (res) { |
| spin_lock_irq(&bus->reg_lock); |
| res->opened = 1; |
| res->running = 0; |
| res->assigned_key = key; |
| res->substream = substream; |
| spin_unlock_irq(&bus->reg_lock); |
| } |
| return res; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_assign); |
| |
| /** |
| * snd_hdac_stream_release - release the assigned stream |
| * @azx_dev: HD-audio core stream to release |
| * |
| * Release the stream that has been assigned by snd_hdac_stream_assign(). |
| */ |
| void snd_hdac_stream_release(struct hdac_stream *azx_dev) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| |
| spin_lock_irq(&bus->reg_lock); |
| azx_dev->opened = 0; |
| azx_dev->running = 0; |
| azx_dev->substream = NULL; |
| spin_unlock_irq(&bus->reg_lock); |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_release); |
| |
| /** |
| * snd_hdac_get_stream - return hdac_stream based on stream_tag and |
| * direction |
| * |
| * @bus: HD-audio core bus |
| * @dir: direction for the stream to be found |
| * @stream_tag: stream tag for stream to be found |
| */ |
| struct hdac_stream *snd_hdac_get_stream(struct hdac_bus *bus, |
| int dir, int stream_tag) |
| { |
| struct hdac_stream *s; |
| |
| list_for_each_entry(s, &bus->stream_list, list) { |
| if (s->direction == dir && s->stream_tag == stream_tag) |
| return s; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_get_stream); |
| |
| /* |
| * set up a BDL entry |
| */ |
| static int setup_bdle(struct hdac_bus *bus, |
| struct snd_dma_buffer *dmab, |
| struct hdac_stream *azx_dev, __le32 **bdlp, |
| int ofs, int size, int with_ioc) |
| { |
| __le32 *bdl = *bdlp; |
| |
| while (size > 0) { |
| dma_addr_t addr; |
| int chunk; |
| |
| if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) |
| return -EINVAL; |
| |
| addr = snd_sgbuf_get_addr(dmab, ofs); |
| /* program the address field of the BDL entry */ |
| bdl[0] = cpu_to_le32((u32)addr); |
| bdl[1] = cpu_to_le32(upper_32_bits(addr)); |
| /* program the size field of the BDL entry */ |
| chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size); |
| /* one BDLE cannot cross 4K boundary on CTHDA chips */ |
| if (bus->align_bdle_4k) { |
| u32 remain = 0x1000 - (ofs & 0xfff); |
| |
| if (chunk > remain) |
| chunk = remain; |
| } |
| bdl[2] = cpu_to_le32(chunk); |
| /* program the IOC to enable interrupt |
| * only when the whole fragment is processed |
| */ |
| size -= chunk; |
| bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); |
| bdl += 4; |
| azx_dev->frags++; |
| ofs += chunk; |
| } |
| *bdlp = bdl; |
| return ofs; |
| } |
| |
| /** |
| * snd_hdac_stream_setup_periods - set up BDL entries |
| * @azx_dev: HD-audio core stream to set up |
| * |
| * Set up the buffer descriptor table of the given stream based on the |
| * period and buffer sizes of the assigned PCM substream. |
| */ |
| int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| struct snd_pcm_substream *substream = azx_dev->substream; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| __le32 *bdl; |
| int i, ofs, periods, period_bytes; |
| int pos_adj, pos_align; |
| |
| /* reset BDL address */ |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| |
| period_bytes = azx_dev->period_bytes; |
| periods = azx_dev->bufsize / period_bytes; |
| |
| /* program the initial BDL entries */ |
| bdl = (__le32 *)azx_dev->bdl.area; |
| ofs = 0; |
| azx_dev->frags = 0; |
| |
| pos_adj = bus->bdl_pos_adj; |
| if (!azx_dev->no_period_wakeup && pos_adj > 0) { |
| pos_align = pos_adj; |
| pos_adj = (pos_adj * runtime->rate + 47999) / 48000; |
| if (!pos_adj) |
| pos_adj = pos_align; |
| else |
| pos_adj = ((pos_adj + pos_align - 1) / pos_align) * |
| pos_align; |
| pos_adj = frames_to_bytes(runtime, pos_adj); |
| if (pos_adj >= period_bytes) { |
| dev_warn(bus->dev, "Too big adjustment %d\n", |
| pos_adj); |
| pos_adj = 0; |
| } else { |
| ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), |
| azx_dev, |
| &bdl, ofs, pos_adj, true); |
| if (ofs < 0) |
| goto error; |
| } |
| } else |
| pos_adj = 0; |
| |
| for (i = 0; i < periods; i++) { |
| if (i == periods - 1 && pos_adj) |
| ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), |
| azx_dev, &bdl, ofs, |
| period_bytes - pos_adj, 0); |
| else |
| ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), |
| azx_dev, &bdl, ofs, |
| period_bytes, |
| !azx_dev->no_period_wakeup); |
| if (ofs < 0) |
| goto error; |
| } |
| return 0; |
| |
| error: |
| dev_err(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n", |
| azx_dev->bufsize, period_bytes); |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); |
| |
| /** |
| * snd_hdac_stream_set_params - set stream parameters |
| * @azx_dev: HD-audio core stream for which parameters are to be set |
| * @format_val: format value parameter |
| * |
| * Setup the HD-audio core stream parameters from substream of the stream |
| * and passed format value |
| */ |
| int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, |
| unsigned int format_val) |
| { |
| |
| unsigned int bufsize, period_bytes; |
| struct snd_pcm_substream *substream = azx_dev->substream; |
| struct snd_pcm_runtime *runtime; |
| int err; |
| |
| if (!substream) |
| return -EINVAL; |
| runtime = substream->runtime; |
| bufsize = snd_pcm_lib_buffer_bytes(substream); |
| period_bytes = snd_pcm_lib_period_bytes(substream); |
| |
| if (bufsize != azx_dev->bufsize || |
| period_bytes != azx_dev->period_bytes || |
| format_val != azx_dev->format_val || |
| runtime->no_period_wakeup != azx_dev->no_period_wakeup) { |
| azx_dev->bufsize = bufsize; |
| azx_dev->period_bytes = period_bytes; |
| azx_dev->format_val = format_val; |
| azx_dev->no_period_wakeup = runtime->no_period_wakeup; |
| err = snd_hdac_stream_setup_periods(azx_dev); |
| if (err < 0) |
| return err; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_set_params); |
| |
| static u64 azx_cc_read(const struct cyclecounter *cc) |
| { |
| struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); |
| |
| return snd_hdac_chip_readl(azx_dev->bus, WALLCLK); |
| } |
| |
| static void azx_timecounter_init(struct hdac_stream *azx_dev, |
| bool force, u64 last) |
| { |
| struct timecounter *tc = &azx_dev->tc; |
| struct cyclecounter *cc = &azx_dev->cc; |
| u64 nsec; |
| |
| cc->read = azx_cc_read; |
| cc->mask = CLOCKSOURCE_MASK(32); |
| |
| /* |
| * Converting from 24 MHz to ns means applying a 125/3 factor. |
| * To avoid any saturation issues in intermediate operations, |
| * the 125 factor is applied first. The division is applied |
| * last after reading the timecounter value. |
| * Applying the 1/3 factor as part of the multiplication |
| * requires at least 20 bits for a decent precision, however |
| * overflows occur after about 4 hours or less, not a option. |
| */ |
| |
| cc->mult = 125; /* saturation after 195 years */ |
| cc->shift = 0; |
| |
| nsec = 0; /* audio time is elapsed time since trigger */ |
| timecounter_init(tc, cc, nsec); |
| if (force) { |
| /* |
| * force timecounter to use predefined value, |
| * used for synchronized starts |
| */ |
| tc->cycle_last = last; |
| } |
| } |
| |
| /** |
| * snd_hdac_stream_timecounter_init - initialize time counter |
| * @azx_dev: HD-audio core stream (master stream) |
| * @streams: bit flags of streams to set up |
| * |
| * Initializes the time counter of streams marked by the bit flags (each |
| * bit corresponds to the stream index). |
| * The trigger timestamp of PCM substream assigned to the given stream is |
| * updated accordingly, too. |
| */ |
| void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, |
| unsigned int streams) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; |
| struct hdac_stream *s; |
| bool inited = false; |
| u64 cycle_last = 0; |
| int i = 0; |
| |
| list_for_each_entry(s, &bus->stream_list, list) { |
| if (streams & (1 << i)) { |
| azx_timecounter_init(s, inited, cycle_last); |
| if (!inited) { |
| inited = true; |
| cycle_last = s->tc.cycle_last; |
| } |
| } |
| i++; |
| } |
| |
| snd_pcm_gettime(runtime, &runtime->trigger_tstamp); |
| runtime->trigger_tstamp_latched = true; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init); |
| |
| /** |
| * snd_hdac_stream_sync_trigger - turn on/off stream sync register |
| * @azx_dev: HD-audio core stream (master stream) |
| * @set: true = set, false = clear |
| * @streams: bit flags of streams to sync |
| * @reg: the stream sync register address |
| */ |
| void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, |
| unsigned int streams, unsigned int reg) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| unsigned int val; |
| |
| if (!reg) |
| reg = AZX_REG_SSYNC; |
| val = _snd_hdac_chip_readl(bus, reg); |
| if (set) |
| val |= streams; |
| else |
| val &= ~streams; |
| _snd_hdac_chip_writel(bus, reg, val); |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger); |
| |
| /** |
| * snd_hdac_stream_sync - sync with start/strop trigger operation |
| * @azx_dev: HD-audio core stream (master stream) |
| * @start: true = start, false = stop |
| * @streams: bit flags of streams to sync |
| * |
| * For @start = true, wait until all FIFOs get ready. |
| * For @start = false, wait until all RUN bits are cleared. |
| */ |
| void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, |
| unsigned int streams) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| int i, nwait, timeout; |
| struct hdac_stream *s; |
| |
| for (timeout = 5000; timeout; timeout--) { |
| nwait = 0; |
| i = 0; |
| list_for_each_entry(s, &bus->stream_list, list) { |
| if (streams & (1 << i)) { |
| if (start) { |
| /* check FIFO gets ready */ |
| if (!(snd_hdac_stream_readb(s, SD_STS) & |
| SD_STS_FIFO_READY)) |
| nwait++; |
| } else { |
| /* check RUN bit is cleared */ |
| if (snd_hdac_stream_readb(s, SD_CTL) & |
| SD_CTL_DMA_START) |
| nwait++; |
| } |
| } |
| i++; |
| } |
| if (!nwait) |
| break; |
| cpu_relax(); |
| } |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); |
| |
| #ifdef CONFIG_SND_HDA_DSP_LOADER |
| /** |
| * snd_hdac_dsp_prepare - prepare for DSP loading |
| * @azx_dev: HD-audio core stream used for DSP loading |
| * @format: HD-audio stream format |
| * @byte_size: data chunk byte size |
| * @bufp: allocated buffer |
| * |
| * Allocate the buffer for the given size and set up the given stream for |
| * DSP loading. Returns the stream tag (>= 0), or a negative error code. |
| */ |
| int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, |
| unsigned int byte_size, struct snd_dma_buffer *bufp) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| __le32 *bdl; |
| int err; |
| |
| snd_hdac_dsp_lock(azx_dev); |
| spin_lock_irq(&bus->reg_lock); |
| if (azx_dev->running || azx_dev->locked) { |
| spin_unlock_irq(&bus->reg_lock); |
| err = -EBUSY; |
| goto unlock; |
| } |
| azx_dev->locked = true; |
| spin_unlock_irq(&bus->reg_lock); |
| |
| err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, bus->dev, |
| byte_size, bufp); |
| if (err < 0) |
| goto err_alloc; |
| |
| azx_dev->substream = NULL; |
| azx_dev->bufsize = byte_size; |
| azx_dev->period_bytes = byte_size; |
| azx_dev->format_val = format; |
| |
| snd_hdac_stream_reset(azx_dev); |
| |
| /* reset BDL address */ |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| |
| azx_dev->frags = 0; |
| bdl = (__le32 *)azx_dev->bdl.area; |
| err = setup_bdle(bus, bufp, azx_dev, &bdl, 0, byte_size, 0); |
| if (err < 0) |
| goto error; |
| |
| snd_hdac_stream_setup(azx_dev); |
| snd_hdac_dsp_unlock(azx_dev); |
| return azx_dev->stream_tag; |
| |
| error: |
| snd_dma_free_pages(bufp); |
| err_alloc: |
| spin_lock_irq(&bus->reg_lock); |
| azx_dev->locked = false; |
| spin_unlock_irq(&bus->reg_lock); |
| unlock: |
| snd_hdac_dsp_unlock(azx_dev); |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_dsp_prepare); |
| |
| /** |
| * snd_hdac_dsp_trigger - start / stop DSP loading |
| * @azx_dev: HD-audio core stream used for DSP loading |
| * @start: trigger start or stop |
| */ |
| void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) |
| { |
| if (start) |
| snd_hdac_stream_start(azx_dev, true); |
| else |
| snd_hdac_stream_stop(azx_dev); |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_dsp_trigger); |
| |
| /** |
| * snd_hdac_dsp_cleanup - clean up the stream from DSP loading to normal |
| * @azx_dev: HD-audio core stream used for DSP loading |
| * @dmab: buffer used by DSP loading |
| */ |
| void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, |
| struct snd_dma_buffer *dmab) |
| { |
| struct hdac_bus *bus = azx_dev->bus; |
| |
| if (!dmab->area || !azx_dev->locked) |
| return; |
| |
| snd_hdac_dsp_lock(azx_dev); |
| /* reset BDL address */ |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| snd_hdac_stream_writel(azx_dev, SD_CTL, 0); |
| azx_dev->bufsize = 0; |
| azx_dev->period_bytes = 0; |
| azx_dev->format_val = 0; |
| |
| snd_dma_free_pages(dmab); |
| dmab->area = NULL; |
| |
| spin_lock_irq(&bus->reg_lock); |
| azx_dev->locked = false; |
| spin_unlock_irq(&bus->reg_lock); |
| snd_hdac_dsp_unlock(azx_dev); |
| } |
| EXPORT_SYMBOL_GPL(snd_hdac_dsp_cleanup); |
| #endif /* CONFIG_SND_HDA_DSP_LOADER */ |