| /* |
| * FireWire Serial driver |
| * |
| * Copyright (C) 2012 Peter Hurley <peter@hurleysoftware.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/rculist.h> |
| #include <linux/workqueue.h> |
| #include <linux/ratelimit.h> |
| #include <linux/bug.h> |
| #include <linux/uaccess.h> |
| |
| #include "fwserial.h" |
| |
| #define be32_to_u64(hi, lo) ((u64)be32_to_cpu(hi) << 32 | be32_to_cpu(lo)) |
| |
| #define LINUX_VENDOR_ID 0xd00d1eU /* same id used in card root directory */ |
| #define FWSERIAL_VERSION 0x00e81cU /* must be unique within LINUX_VENDOR_ID */ |
| |
| /* configurable options */ |
| static int num_ttys = 4; /* # of std ttys to create per fw_card */ |
| /* - doubles as loopback port index */ |
| static bool auto_connect = true; /* try to VIRT_CABLE to every peer */ |
| static bool create_loop_dev = true; /* create a loopback device for each card */ |
| |
| module_param_named(ttys, num_ttys, int, S_IRUGO | S_IWUSR); |
| module_param_named(auto, auto_connect, bool, S_IRUGO | S_IWUSR); |
| module_param_named(loop, create_loop_dev, bool, S_IRUGO | S_IWUSR); |
| |
| /* |
| * Threshold below which the tty is woken for writing |
| * - should be equal to WAKEUP_CHARS in drivers/tty/n_tty.c because |
| * even if the writer is woken, n_tty_poll() won't set POLLOUT until |
| * our fifo is below this level |
| */ |
| #define WAKEUP_CHARS 256 |
| |
| /** |
| * fwserial_list: list of every fw_serial created for each fw_card |
| * See discussion in fwserial_probe. |
| */ |
| static LIST_HEAD(fwserial_list); |
| static DEFINE_MUTEX(fwserial_list_mutex); |
| |
| /** |
| * port_table: array of tty ports allocated to each fw_card |
| * |
| * tty ports are allocated during probe when an fw_serial is first |
| * created for a given fw_card. Ports are allocated in a contiguous block, |
| * each block consisting of 'num_ports' ports. |
| */ |
| static struct fwtty_port *port_table[MAX_TOTAL_PORTS]; |
| static DEFINE_MUTEX(port_table_lock); |
| static bool port_table_corrupt; |
| #define FWTTY_INVALID_INDEX MAX_TOTAL_PORTS |
| |
| #define loop_idx(port) (((port)->index) / num_ports) |
| #define table_idx(loop) ((loop) * num_ports + num_ttys) |
| |
| /* total # of tty ports created per fw_card */ |
| static int num_ports; |
| |
| /* slab used as pool for struct fwtty_transactions */ |
| static struct kmem_cache *fwtty_txn_cache; |
| |
| struct tty_driver *fwtty_driver; |
| static struct tty_driver *fwloop_driver; |
| |
| static struct dentry *fwserial_debugfs; |
| |
| struct fwtty_transaction; |
| typedef void (*fwtty_transaction_cb)(struct fw_card *card, int rcode, |
| void *data, size_t length, |
| struct fwtty_transaction *txn); |
| |
| struct fwtty_transaction { |
| struct fw_transaction fw_txn; |
| fwtty_transaction_cb callback; |
| struct fwtty_port *port; |
| union { |
| struct dma_pending dma_pended; |
| }; |
| }; |
| |
| #define to_device(a, b) (a->b) |
| #define fwtty_err(p, fmt, ...) \ |
| dev_err(to_device(p, device), fmt, ##__VA_ARGS__) |
| #define fwtty_info(p, fmt, ...) \ |
| dev_info(to_device(p, device), fmt, ##__VA_ARGS__) |
| #define fwtty_notice(p, fmt, ...) \ |
| dev_notice(to_device(p, device), fmt, ##__VA_ARGS__) |
| #define fwtty_dbg(p, fmt, ...) \ |
| dev_dbg(to_device(p, device), "%s: " fmt, __func__, ##__VA_ARGS__) |
| #define fwtty_err_ratelimited(p, fmt, ...) \ |
| dev_err_ratelimited(to_device(p, device), fmt, ##__VA_ARGS__) |
| |
| #ifdef DEBUG |
| static inline void debug_short_write(struct fwtty_port *port, int c, int n) |
| { |
| int avail; |
| |
| if (n < c) { |
| spin_lock_bh(&port->lock); |
| avail = dma_fifo_avail(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| fwtty_dbg(port, "short write: avail:%d req:%d wrote:%d\n", |
| avail, c, n); |
| } |
| } |
| #else |
| #define debug_short_write(port, c, n) |
| #endif |
| |
| static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card, |
| int generation, int id); |
| |
| #ifdef FWTTY_PROFILING |
| |
| static void fwtty_profile_fifo(struct fwtty_port *port, unsigned *stat) |
| { |
| spin_lock_bh(&port->lock); |
| fwtty_profile_data(stat, dma_fifo_avail(&port->tx_fifo)); |
| spin_unlock_bh(&port->lock); |
| } |
| |
| static void fwtty_dump_profile(struct seq_file *m, struct stats *stats) |
| { |
| /* for each stat, print sum of 0 to 2^k, then individually */ |
| int k = 4; |
| unsigned sum; |
| int j; |
| char t[10]; |
| |
| snprintf(t, 10, "< %d", 1 << k); |
| seq_printf(m, "\n%14s %6s", " ", t); |
| for (j = k + 1; j < DISTRIBUTION_MAX_INDEX; ++j) |
| seq_printf(m, "%6d", 1 << j); |
| |
| ++k; |
| for (j = 0, sum = 0; j <= k; ++j) |
| sum += stats->reads[j]; |
| seq_printf(m, "\n%14s: %6d", "reads", sum); |
| for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) |
| seq_printf(m, "%6d", stats->reads[j]); |
| |
| for (j = 0, sum = 0; j <= k; ++j) |
| sum += stats->writes[j]; |
| seq_printf(m, "\n%14s: %6d", "writes", sum); |
| for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) |
| seq_printf(m, "%6d", stats->writes[j]); |
| |
| for (j = 0, sum = 0; j <= k; ++j) |
| sum += stats->txns[j]; |
| seq_printf(m, "\n%14s: %6d", "txns", sum); |
| for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) |
| seq_printf(m, "%6d", stats->txns[j]); |
| |
| for (j = 0, sum = 0; j <= k; ++j) |
| sum += stats->unthrottle[j]; |
| seq_printf(m, "\n%14s: %6d", "avail @ unthr", sum); |
| for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) |
| seq_printf(m, "%6d", stats->unthrottle[j]); |
| } |
| |
| #else |
| #define fwtty_profile_fifo(port, stat) |
| #define fwtty_dump_profile(m, stats) |
| #endif |
| |
| /* |
| * Returns the max receive packet size for the given node |
| * Devices which are OHCI v1.0/ v1.1/ v1.2-draft or RFC 2734 compliant |
| * are required by specification to support max_rec of 8 (512 bytes) or more. |
| */ |
| static inline int device_max_receive(struct fw_device *fw_device) |
| { |
| /* see IEEE 1394-2008 table 8-8 */ |
| return min(2 << fw_device->max_rec, 4096); |
| } |
| |
| static void fwtty_log_tx_error(struct fwtty_port *port, int rcode) |
| { |
| switch (rcode) { |
| case RCODE_SEND_ERROR: |
| fwtty_err_ratelimited(port, "card busy\n"); |
| break; |
| case RCODE_ADDRESS_ERROR: |
| fwtty_err_ratelimited(port, "bad unit addr or write length\n"); |
| break; |
| case RCODE_DATA_ERROR: |
| fwtty_err_ratelimited(port, "failed rx\n"); |
| break; |
| case RCODE_NO_ACK: |
| fwtty_err_ratelimited(port, "missing ack\n"); |
| break; |
| case RCODE_BUSY: |
| fwtty_err_ratelimited(port, "remote busy\n"); |
| break; |
| default: |
| fwtty_err_ratelimited(port, "failed tx: %d\n", rcode); |
| } |
| } |
| |
| static void fwtty_txn_constructor(void *this) |
| { |
| struct fwtty_transaction *txn = this; |
| |
| init_timer(&txn->fw_txn.split_timeout_timer); |
| } |
| |
| static void fwtty_common_callback(struct fw_card *card, int rcode, |
| void *payload, size_t len, void *cb_data) |
| { |
| struct fwtty_transaction *txn = cb_data; |
| struct fwtty_port *port = txn->port; |
| |
| if (port && rcode != RCODE_COMPLETE) |
| fwtty_log_tx_error(port, rcode); |
| if (txn->callback) |
| txn->callback(card, rcode, payload, len, txn); |
| kmem_cache_free(fwtty_txn_cache, txn); |
| } |
| |
| static int fwtty_send_data_async(struct fwtty_peer *peer, int tcode, |
| unsigned long long addr, void *payload, |
| size_t len, fwtty_transaction_cb callback, |
| struct fwtty_port *port) |
| { |
| struct fwtty_transaction *txn; |
| int generation; |
| |
| txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC); |
| if (!txn) |
| return -ENOMEM; |
| |
| txn->callback = callback; |
| txn->port = port; |
| |
| generation = peer->generation; |
| smp_rmb(); |
| fw_send_request(peer->serial->card, &txn->fw_txn, tcode, |
| peer->node_id, generation, peer->speed, addr, payload, |
| len, fwtty_common_callback, txn); |
| return 0; |
| } |
| |
| static void fwtty_send_txn_async(struct fwtty_peer *peer, |
| struct fwtty_transaction *txn, int tcode, |
| unsigned long long addr, void *payload, |
| size_t len, fwtty_transaction_cb callback, |
| struct fwtty_port *port) |
| { |
| int generation; |
| |
| txn->callback = callback; |
| txn->port = port; |
| |
| generation = peer->generation; |
| smp_rmb(); |
| fw_send_request(peer->serial->card, &txn->fw_txn, tcode, |
| peer->node_id, generation, peer->speed, addr, payload, |
| len, fwtty_common_callback, txn); |
| } |
| |
| static void __fwtty_restart_tx(struct fwtty_port *port) |
| { |
| int len, avail; |
| |
| len = dma_fifo_out_level(&port->tx_fifo); |
| if (len) |
| schedule_delayed_work(&port->drain, 0); |
| avail = dma_fifo_avail(&port->tx_fifo); |
| |
| fwtty_dbg(port, "fifo len: %d avail: %d\n", len, avail); |
| } |
| |
| static void fwtty_restart_tx(struct fwtty_port *port) |
| { |
| spin_lock_bh(&port->lock); |
| __fwtty_restart_tx(port); |
| spin_unlock_bh(&port->lock); |
| } |
| |
| /** |
| * fwtty_update_port_status - decodes & dispatches line status changes |
| * |
| * Note: in loopback, the port->lock is being held. Only use functions that |
| * don't attempt to reclaim the port->lock. |
| */ |
| static void fwtty_update_port_status(struct fwtty_port *port, unsigned status) |
| { |
| unsigned delta; |
| struct tty_struct *tty; |
| |
| /* simulated LSR/MSR status from remote */ |
| status &= ~MCTRL_MASK; |
| delta = (port->mstatus ^ status) & ~MCTRL_MASK; |
| delta &= ~(status & TIOCM_RNG); |
| port->mstatus = status; |
| |
| if (delta & TIOCM_RNG) |
| ++port->icount.rng; |
| if (delta & TIOCM_DSR) |
| ++port->icount.dsr; |
| if (delta & TIOCM_CAR) |
| ++port->icount.dcd; |
| if (delta & TIOCM_CTS) |
| ++port->icount.cts; |
| |
| fwtty_dbg(port, "status: %x delta: %x\n", status, delta); |
| |
| if (delta & TIOCM_CAR) { |
| tty = tty_port_tty_get(&port->port); |
| if (tty && !C_CLOCAL(tty)) { |
| if (status & TIOCM_CAR) |
| wake_up_interruptible(&port->port.open_wait); |
| else |
| schedule_work(&port->hangup); |
| } |
| tty_kref_put(tty); |
| } |
| |
| if (delta & TIOCM_CTS) { |
| tty = tty_port_tty_get(&port->port); |
| if (tty && C_CRTSCTS(tty)) { |
| if (tty->hw_stopped) { |
| if (status & TIOCM_CTS) { |
| tty->hw_stopped = 0; |
| if (port->loopback) |
| __fwtty_restart_tx(port); |
| else |
| fwtty_restart_tx(port); |
| } |
| } else { |
| if (~status & TIOCM_CTS) |
| tty->hw_stopped = 1; |
| } |
| } |
| tty_kref_put(tty); |
| |
| } else if (delta & OOB_TX_THROTTLE) { |
| tty = tty_port_tty_get(&port->port); |
| if (tty) { |
| if (tty->hw_stopped) { |
| if (~status & OOB_TX_THROTTLE) { |
| tty->hw_stopped = 0; |
| if (port->loopback) |
| __fwtty_restart_tx(port); |
| else |
| fwtty_restart_tx(port); |
| } |
| } else { |
| if (status & OOB_TX_THROTTLE) |
| tty->hw_stopped = 1; |
| } |
| } |
| tty_kref_put(tty); |
| } |
| |
| if (delta & (UART_LSR_BI << 24)) { |
| if (status & (UART_LSR_BI << 24)) { |
| port->break_last = jiffies; |
| schedule_delayed_work(&port->emit_breaks, 0); |
| } else { |
| /* run emit_breaks one last time (if pending) */ |
| mod_delayed_work(system_wq, &port->emit_breaks, 0); |
| } |
| } |
| |
| if (delta & (TIOCM_DSR | TIOCM_CAR | TIOCM_CTS | TIOCM_RNG)) |
| wake_up_interruptible(&port->port.delta_msr_wait); |
| } |
| |
| /** |
| * __fwtty_port_line_status - generate 'line status' for indicated port |
| * |
| * This function returns a remote 'MSR' state based on the local 'MCR' state, |
| * as if a null modem cable was attached. The actual status is a mangling |
| * of TIOCM_* bits suitable for sending to a peer's status_addr. |
| * |
| * Note: caller must be holding port lock |
| */ |
| static unsigned __fwtty_port_line_status(struct fwtty_port *port) |
| { |
| unsigned status = 0; |
| |
| /* TODO: add module param to tie RNG to DTR as well */ |
| |
| if (port->mctrl & TIOCM_DTR) |
| status |= TIOCM_DSR | TIOCM_CAR; |
| if (port->mctrl & TIOCM_RTS) |
| status |= TIOCM_CTS; |
| if (port->mctrl & OOB_RX_THROTTLE) |
| status |= OOB_TX_THROTTLE; |
| /* emulate BRK as add'l line status */ |
| if (port->break_ctl) |
| status |= UART_LSR_BI << 24; |
| |
| return status; |
| } |
| |
| /** |
| * __fwtty_write_port_status - send the port line status to peer |
| * |
| * Note: caller must be holding the port lock. |
| */ |
| static int __fwtty_write_port_status(struct fwtty_port *port) |
| { |
| struct fwtty_peer *peer; |
| int err = -ENOENT; |
| unsigned status = __fwtty_port_line_status(port); |
| |
| rcu_read_lock(); |
| peer = rcu_dereference(port->peer); |
| if (peer) { |
| err = fwtty_send_data_async(peer, TCODE_WRITE_QUADLET_REQUEST, |
| peer->status_addr, &status, |
| sizeof(status), NULL, port); |
| } |
| rcu_read_unlock(); |
| |
| return err; |
| } |
| |
| /** |
| * fwtty_write_port_status - same as above but locked by port lock |
| */ |
| static int fwtty_write_port_status(struct fwtty_port *port) |
| { |
| int err; |
| |
| spin_lock_bh(&port->lock); |
| err = __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| return err; |
| } |
| |
| static void fwtty_throttle_port(struct fwtty_port *port) |
| { |
| struct tty_struct *tty; |
| unsigned old; |
| |
| tty = tty_port_tty_get(&port->port); |
| if (!tty) |
| return; |
| |
| spin_lock_bh(&port->lock); |
| |
| old = port->mctrl; |
| port->mctrl |= OOB_RX_THROTTLE; |
| if (C_CRTSCTS(tty)) |
| port->mctrl &= ~TIOCM_RTS; |
| if (~old & OOB_RX_THROTTLE) |
| __fwtty_write_port_status(port); |
| |
| spin_unlock_bh(&port->lock); |
| |
| tty_kref_put(tty); |
| } |
| |
| /** |
| * fwtty_do_hangup - wait for ldisc to deliver all pending rx; only then hangup |
| * |
| * When the remote has finished tx, and all in-flight rx has been received and |
| * and pushed to the flip buffer, the remote may close its device. This will |
| * drop DTR on the remote which will drop carrier here. Typically, the tty is |
| * hung up when carrier is dropped or lost. |
| * |
| * However, there is a race between the hang up and the line discipline |
| * delivering its data to the reader. A hangup will cause the ldisc to flush |
| * (ie., clear) the read buffer and flip buffer. Because of firewire's |
| * relatively high throughput, the ldisc frequently lags well behind the driver, |
| * resulting in lost data (which has already been received and written to |
| * the flip buffer) when the remote closes its end. |
| * |
| * Unfortunately, since the flip buffer offers no direct method for determining |
| * if it holds data, ensuring the ldisc has delivered all data is problematic. |
| */ |
| |
| /* FIXME: drop this workaround when __tty_hangup waits for ldisc completion */ |
| static void fwtty_do_hangup(struct work_struct *work) |
| { |
| struct fwtty_port *port = to_port(work, hangup); |
| struct tty_struct *tty; |
| |
| schedule_timeout_uninterruptible(msecs_to_jiffies(50)); |
| |
| tty = tty_port_tty_get(&port->port); |
| if (tty) |
| tty_vhangup(tty); |
| tty_kref_put(tty); |
| } |
| |
| static void fwtty_emit_breaks(struct work_struct *work) |
| { |
| struct fwtty_port *port = to_port(to_delayed_work(work), emit_breaks); |
| static const char buf[16]; |
| unsigned long now = jiffies; |
| unsigned long elapsed = now - port->break_last; |
| int n, t, c, brk = 0; |
| |
| /* generate breaks at the line rate (but at least 1) */ |
| n = (elapsed * port->cps) / HZ + 1; |
| port->break_last = now; |
| |
| fwtty_dbg(port, "sending %d brks\n", n); |
| |
| while (n) { |
| t = min(n, 16); |
| c = tty_insert_flip_string_fixed_flag(&port->port, buf, |
| TTY_BREAK, t); |
| n -= c; |
| brk += c; |
| if (c < t) |
| break; |
| } |
| tty_flip_buffer_push(&port->port); |
| |
| if (port->mstatus & (UART_LSR_BI << 24)) |
| schedule_delayed_work(&port->emit_breaks, FREQ_BREAKS); |
| port->icount.brk += brk; |
| } |
| |
| static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len) |
| { |
| int c, n = len; |
| unsigned lsr; |
| int err = 0; |
| |
| fwtty_dbg(port, "%d\n", n); |
| fwtty_profile_data(port->stats.reads, n); |
| |
| if (port->write_only) { |
| n = 0; |
| goto out; |
| } |
| |
| /* disregard break status; breaks are generated by emit_breaks work */ |
| lsr = (port->mstatus >> 24) & ~UART_LSR_BI; |
| |
| if (port->overrun) |
| lsr |= UART_LSR_OE; |
| |
| if (lsr & UART_LSR_OE) |
| ++port->icount.overrun; |
| |
| lsr &= port->status_mask; |
| if (lsr & ~port->ignore_mask & UART_LSR_OE) { |
| if (!tty_insert_flip_char(&port->port, 0, TTY_OVERRUN)) { |
| err = -EIO; |
| goto out; |
| } |
| } |
| port->overrun = false; |
| |
| if (lsr & port->ignore_mask & ~UART_LSR_OE) { |
| /* TODO: don't drop SAK and Magic SysRq here */ |
| n = 0; |
| goto out; |
| } |
| |
| c = tty_insert_flip_string_fixed_flag(&port->port, data, TTY_NORMAL, n); |
| if (c > 0) |
| tty_flip_buffer_push(&port->port); |
| n -= c; |
| |
| if (n) { |
| port->overrun = true; |
| err = -EIO; |
| fwtty_err_ratelimited(port, "flip buffer overrun\n"); |
| |
| } else { |
| /* throttle the sender if remaining flip buffer space has |
| * reached high watermark to avoid losing data which may be |
| * in-flight. Since the AR request context is 32k, that much |
| * data may have _already_ been acked. |
| */ |
| if (tty_buffer_space_avail(&port->port) < HIGH_WATERMARK) |
| fwtty_throttle_port(port); |
| } |
| |
| out: |
| port->icount.rx += len; |
| port->stats.lost += n; |
| return err; |
| } |
| |
| /** |
| * fwtty_port_handler - bus address handler for port reads/writes |
| * @parameters: fw_address_callback_t as specified by firewire core interface |
| * |
| * This handler is responsible for handling inbound read/write dma from remotes. |
| */ |
| static void fwtty_port_handler(struct fw_card *card, |
| struct fw_request *request, |
| int tcode, int destination, int source, |
| int generation, |
| unsigned long long addr, |
| void *data, size_t len, |
| void *callback_data) |
| { |
| struct fwtty_port *port = callback_data; |
| struct fwtty_peer *peer; |
| int err; |
| int rcode; |
| |
| /* Only accept rx from the peer virtual-cabled to this port */ |
| rcu_read_lock(); |
| peer = __fwserial_peer_by_node_id(card, generation, source); |
| rcu_read_unlock(); |
| if (!peer || peer != rcu_access_pointer(port->peer)) { |
| rcode = RCODE_ADDRESS_ERROR; |
| fwtty_err_ratelimited(port, "ignoring unauthenticated data\n"); |
| goto respond; |
| } |
| |
| switch (tcode) { |
| case TCODE_WRITE_QUADLET_REQUEST: |
| if (addr != port->rx_handler.offset || len != 4) { |
| rcode = RCODE_ADDRESS_ERROR; |
| } else { |
| fwtty_update_port_status(port, *(unsigned *)data); |
| rcode = RCODE_COMPLETE; |
| } |
| break; |
| |
| case TCODE_WRITE_BLOCK_REQUEST: |
| if (addr != port->rx_handler.offset + 4 || |
| len > port->rx_handler.length - 4) { |
| rcode = RCODE_ADDRESS_ERROR; |
| } else { |
| err = fwtty_rx(port, data, len); |
| switch (err) { |
| case 0: |
| rcode = RCODE_COMPLETE; |
| break; |
| case -EIO: |
| rcode = RCODE_DATA_ERROR; |
| break; |
| default: |
| rcode = RCODE_CONFLICT_ERROR; |
| break; |
| } |
| } |
| break; |
| |
| default: |
| rcode = RCODE_TYPE_ERROR; |
| } |
| |
| respond: |
| fw_send_response(card, request, rcode); |
| } |
| |
| /** |
| * fwtty_tx_complete - callback for tx dma |
| * @data: ignored, has no meaning for write txns |
| * @length: ignored, has no meaning for write txns |
| * |
| * The writer must be woken here if the fifo has been emptied because it |
| * may have slept if chars_in_buffer was != 0 |
| */ |
| static void fwtty_tx_complete(struct fw_card *card, int rcode, |
| void *data, size_t length, |
| struct fwtty_transaction *txn) |
| { |
| struct fwtty_port *port = txn->port; |
| int len; |
| |
| fwtty_dbg(port, "rcode: %d\n", rcode); |
| |
| switch (rcode) { |
| case RCODE_COMPLETE: |
| spin_lock_bh(&port->lock); |
| dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended); |
| len = dma_fifo_level(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| |
| port->icount.tx += txn->dma_pended.len; |
| break; |
| |
| default: |
| /* TODO: implement retries */ |
| spin_lock_bh(&port->lock); |
| dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended); |
| len = dma_fifo_level(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| |
| port->stats.dropped += txn->dma_pended.len; |
| } |
| |
| if (len < WAKEUP_CHARS) |
| tty_port_tty_wakeup(&port->port); |
| } |
| |
| static int fwtty_tx(struct fwtty_port *port, bool drain) |
| { |
| struct fwtty_peer *peer; |
| struct fwtty_transaction *txn; |
| struct tty_struct *tty; |
| int n, len; |
| |
| tty = tty_port_tty_get(&port->port); |
| if (!tty) |
| return -ENOENT; |
| |
| rcu_read_lock(); |
| peer = rcu_dereference(port->peer); |
| if (!peer) { |
| n = -EIO; |
| goto out; |
| } |
| |
| if (test_and_set_bit(IN_TX, &port->flags)) { |
| n = -EALREADY; |
| goto out; |
| } |
| |
| /* try to write as many dma transactions out as possible */ |
| n = -EAGAIN; |
| while (!tty->stopped && !tty->hw_stopped && |
| !test_bit(STOP_TX, &port->flags)) { |
| txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC); |
| if (!txn) { |
| n = -ENOMEM; |
| break; |
| } |
| |
| spin_lock_bh(&port->lock); |
| n = dma_fifo_out_pend(&port->tx_fifo, &txn->dma_pended); |
| spin_unlock_bh(&port->lock); |
| |
| fwtty_dbg(port, "out: %u rem: %d\n", txn->dma_pended.len, n); |
| |
| if (n < 0) { |
| kmem_cache_free(fwtty_txn_cache, txn); |
| if (n == -EAGAIN) { |
| ++port->stats.tx_stall; |
| } else if (n == -ENODATA) { |
| fwtty_profile_data(port->stats.txns, 0); |
| } else { |
| ++port->stats.fifo_errs; |
| fwtty_err_ratelimited(port, "fifo err: %d\n", |
| n); |
| } |
| break; |
| } |
| |
| fwtty_profile_data(port->stats.txns, txn->dma_pended.len); |
| |
| fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST, |
| peer->fifo_addr, txn->dma_pended.data, |
| txn->dma_pended.len, fwtty_tx_complete, |
| port); |
| ++port->stats.sent; |
| |
| /* |
| * Stop tx if the 'last view' of the fifo is empty or if |
| * this is the writer and there's not enough data to bother |
| */ |
| if (n == 0 || (!drain && n < WRITER_MINIMUM)) |
| break; |
| } |
| |
| if (n >= 0 || n == -EAGAIN || n == -ENOMEM || n == -ENODATA) { |
| spin_lock_bh(&port->lock); |
| len = dma_fifo_out_level(&port->tx_fifo); |
| if (len) { |
| unsigned long delay = (n == -ENOMEM) ? HZ : 1; |
| |
| schedule_delayed_work(&port->drain, delay); |
| } |
| len = dma_fifo_level(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| |
| /* wakeup the writer */ |
| if (drain && len < WAKEUP_CHARS) |
| tty_wakeup(tty); |
| } |
| |
| clear_bit(IN_TX, &port->flags); |
| wake_up_interruptible(&port->wait_tx); |
| |
| out: |
| rcu_read_unlock(); |
| tty_kref_put(tty); |
| return n; |
| } |
| |
| static void fwtty_drain_tx(struct work_struct *work) |
| { |
| struct fwtty_port *port = to_port(to_delayed_work(work), drain); |
| |
| fwtty_tx(port, true); |
| } |
| |
| static void fwtty_write_xchar(struct fwtty_port *port, char ch) |
| { |
| struct fwtty_peer *peer; |
| |
| ++port->stats.xchars; |
| |
| fwtty_dbg(port, "%02x\n", ch); |
| |
| rcu_read_lock(); |
| peer = rcu_dereference(port->peer); |
| if (peer) { |
| fwtty_send_data_async(peer, TCODE_WRITE_BLOCK_REQUEST, |
| peer->fifo_addr, &ch, sizeof(ch), |
| NULL, port); |
| } |
| rcu_read_unlock(); |
| } |
| |
| struct fwtty_port *fwtty_port_get(unsigned index) |
| { |
| struct fwtty_port *port; |
| |
| if (index >= MAX_TOTAL_PORTS) |
| return NULL; |
| |
| mutex_lock(&port_table_lock); |
| port = port_table[index]; |
| if (port) |
| kref_get(&port->serial->kref); |
| mutex_unlock(&port_table_lock); |
| return port; |
| } |
| EXPORT_SYMBOL(fwtty_port_get); |
| |
| static int fwtty_ports_add(struct fw_serial *serial) |
| { |
| int err = -EBUSY; |
| int i, j; |
| |
| if (port_table_corrupt) |
| return err; |
| |
| mutex_lock(&port_table_lock); |
| for (i = 0; i + num_ports <= MAX_TOTAL_PORTS; i += num_ports) { |
| if (!port_table[i]) { |
| for (j = 0; j < num_ports; ++i, ++j) { |
| serial->ports[j]->index = i; |
| port_table[i] = serial->ports[j]; |
| } |
| err = 0; |
| break; |
| } |
| } |
| mutex_unlock(&port_table_lock); |
| return err; |
| } |
| |
| static void fwserial_destroy(struct kref *kref) |
| { |
| struct fw_serial *serial = to_serial(kref, kref); |
| struct fwtty_port **ports = serial->ports; |
| int j, i = ports[0]->index; |
| |
| synchronize_rcu(); |
| |
| mutex_lock(&port_table_lock); |
| for (j = 0; j < num_ports; ++i, ++j) { |
| port_table_corrupt |= port_table[i] != ports[j]; |
| WARN_ONCE(port_table_corrupt, "port_table[%d]: %p != ports[%d]: %p", |
| i, port_table[i], j, ports[j]); |
| |
| port_table[i] = NULL; |
| } |
| mutex_unlock(&port_table_lock); |
| |
| for (j = 0; j < num_ports; ++j) { |
| fw_core_remove_address_handler(&ports[j]->rx_handler); |
| tty_port_destroy(&ports[j]->port); |
| kfree(ports[j]); |
| } |
| kfree(serial); |
| } |
| |
| void fwtty_port_put(struct fwtty_port *port) |
| { |
| kref_put(&port->serial->kref, fwserial_destroy); |
| } |
| EXPORT_SYMBOL(fwtty_port_put); |
| |
| static void fwtty_port_dtr_rts(struct tty_port *tty_port, int on) |
| { |
| struct fwtty_port *port = to_port(tty_port, port); |
| |
| fwtty_dbg(port, "on/off: %d\n", on); |
| |
| spin_lock_bh(&port->lock); |
| /* Don't change carrier state if this is a console */ |
| if (!port->port.console) { |
| if (on) |
| port->mctrl |= TIOCM_DTR | TIOCM_RTS; |
| else |
| port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS); |
| } |
| |
| __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| } |
| |
| /** |
| * fwtty_port_carrier_raised: required tty_port operation |
| * |
| * This port operation is polled after a tty has been opened and is waiting for |
| * carrier detect -- see drivers/tty/tty_port:tty_port_block_til_ready(). |
| */ |
| static int fwtty_port_carrier_raised(struct tty_port *tty_port) |
| { |
| struct fwtty_port *port = to_port(tty_port, port); |
| int rc; |
| |
| rc = (port->mstatus & TIOCM_CAR); |
| |
| fwtty_dbg(port, "%d\n", rc); |
| |
| return rc; |
| } |
| |
| static unsigned set_termios(struct fwtty_port *port, struct tty_struct *tty) |
| { |
| unsigned baud, frame; |
| |
| baud = tty_termios_baud_rate(&tty->termios); |
| tty_termios_encode_baud_rate(&tty->termios, baud, baud); |
| |
| /* compute bit count of 2 frames */ |
| frame = 12 + ((C_CSTOPB(tty)) ? 4 : 2) + ((C_PARENB(tty)) ? 2 : 0); |
| |
| switch (C_CSIZE(tty)) { |
| case CS5: |
| frame -= (C_CSTOPB(tty)) ? 1 : 0; |
| break; |
| case CS6: |
| frame += 2; |
| break; |
| case CS7: |
| frame += 4; |
| break; |
| case CS8: |
| frame += 6; |
| break; |
| } |
| |
| port->cps = (baud << 1) / frame; |
| |
| port->status_mask = UART_LSR_OE; |
| if (_I_FLAG(tty, BRKINT | PARMRK)) |
| port->status_mask |= UART_LSR_BI; |
| |
| port->ignore_mask = 0; |
| if (I_IGNBRK(tty)) { |
| port->ignore_mask |= UART_LSR_BI; |
| if (I_IGNPAR(tty)) |
| port->ignore_mask |= UART_LSR_OE; |
| } |
| |
| port->write_only = !C_CREAD(tty); |
| |
| /* turn off echo and newline xlat if loopback */ |
| if (port->loopback) { |
| tty->termios.c_lflag &= ~(ECHO | ECHOE | ECHOK | ECHOKE | |
| ECHONL | ECHOPRT | ECHOCTL); |
| tty->termios.c_oflag &= ~ONLCR; |
| } |
| |
| return baud; |
| } |
| |
| static int fwtty_port_activate(struct tty_port *tty_port, |
| struct tty_struct *tty) |
| { |
| struct fwtty_port *port = to_port(tty_port, port); |
| unsigned baud; |
| int err; |
| |
| set_bit(TTY_IO_ERROR, &tty->flags); |
| |
| err = dma_fifo_alloc(&port->tx_fifo, FWTTY_PORT_TXFIFO_LEN, |
| cache_line_size(), |
| port->max_payload, |
| FWTTY_PORT_MAX_PEND_DMA, |
| GFP_KERNEL); |
| if (err) |
| return err; |
| |
| spin_lock_bh(&port->lock); |
| |
| baud = set_termios(port, tty); |
| |
| /* if console, don't change carrier state */ |
| if (!port->port.console) { |
| port->mctrl = 0; |
| if (baud != 0) |
| port->mctrl = TIOCM_DTR | TIOCM_RTS; |
| } |
| |
| if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) |
| tty->hw_stopped = 1; |
| |
| __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| |
| clear_bit(TTY_IO_ERROR, &tty->flags); |
| |
| return 0; |
| } |
| |
| /** |
| * fwtty_port_shutdown |
| * |
| * Note: the tty port core ensures this is not the console and |
| * manages TTY_IO_ERROR properly |
| */ |
| static void fwtty_port_shutdown(struct tty_port *tty_port) |
| { |
| struct fwtty_port *port = to_port(tty_port, port); |
| |
| /* TODO: cancel outstanding transactions */ |
| |
| cancel_delayed_work_sync(&port->emit_breaks); |
| cancel_delayed_work_sync(&port->drain); |
| |
| spin_lock_bh(&port->lock); |
| port->flags = 0; |
| port->break_ctl = 0; |
| port->overrun = 0; |
| __fwtty_write_port_status(port); |
| dma_fifo_free(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| } |
| |
| static int fwtty_open(struct tty_struct *tty, struct file *fp) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| return tty_port_open(&port->port, tty, fp); |
| } |
| |
| static void fwtty_close(struct tty_struct *tty, struct file *fp) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| tty_port_close(&port->port, tty, fp); |
| } |
| |
| static void fwtty_hangup(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| tty_port_hangup(&port->port); |
| } |
| |
| static void fwtty_cleanup(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| tty->driver_data = NULL; |
| fwtty_port_put(port); |
| } |
| |
| static int fwtty_install(struct tty_driver *driver, struct tty_struct *tty) |
| { |
| struct fwtty_port *port = fwtty_port_get(tty->index); |
| int err; |
| |
| err = tty_standard_install(driver, tty); |
| if (!err) |
| tty->driver_data = port; |
| else |
| fwtty_port_put(port); |
| return err; |
| } |
| |
| static int fwloop_install(struct tty_driver *driver, struct tty_struct *tty) |
| { |
| struct fwtty_port *port = fwtty_port_get(table_idx(tty->index)); |
| int err; |
| |
| err = tty_standard_install(driver, tty); |
| if (!err) |
| tty->driver_data = port; |
| else |
| fwtty_port_put(port); |
| return err; |
| } |
| |
| static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| int n, len; |
| |
| fwtty_dbg(port, "%d\n", c); |
| fwtty_profile_data(port->stats.writes, c); |
| |
| spin_lock_bh(&port->lock); |
| n = dma_fifo_in(&port->tx_fifo, buf, c); |
| len = dma_fifo_out_level(&port->tx_fifo); |
| if (len < DRAIN_THRESHOLD) |
| schedule_delayed_work(&port->drain, 1); |
| spin_unlock_bh(&port->lock); |
| |
| if (len >= DRAIN_THRESHOLD) |
| fwtty_tx(port, false); |
| |
| debug_short_write(port, c, n); |
| |
| return (n < 0) ? 0 : n; |
| } |
| |
| static int fwtty_write_room(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| int n; |
| |
| spin_lock_bh(&port->lock); |
| n = dma_fifo_avail(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| |
| fwtty_dbg(port, "%d\n", n); |
| |
| return n; |
| } |
| |
| static int fwtty_chars_in_buffer(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| int n; |
| |
| spin_lock_bh(&port->lock); |
| n = dma_fifo_level(&port->tx_fifo); |
| spin_unlock_bh(&port->lock); |
| |
| fwtty_dbg(port, "%d\n", n); |
| |
| return n; |
| } |
| |
| static void fwtty_send_xchar(struct tty_struct *tty, char ch) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| fwtty_dbg(port, "%02x\n", ch); |
| |
| fwtty_write_xchar(port, ch); |
| } |
| |
| static void fwtty_throttle(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| /* |
| * Ignore throttling (but not unthrottling). |
| * It only makes sense to throttle when data will no longer be |
| * accepted by the tty flip buffer. For example, it is |
| * possible for received data to overflow the tty buffer long |
| * before the line discipline ever has a chance to throttle the driver. |
| * Additionally, the driver may have already completed the I/O |
| * but the tty buffer is still emptying, so the line discipline is |
| * throttling and unthrottling nothing. |
| */ |
| |
| ++port->stats.throttled; |
| } |
| |
| static void fwtty_unthrottle(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| fwtty_dbg(port, "CRTSCTS: %d\n", C_CRTSCTS(tty) != 0); |
| |
| fwtty_profile_fifo(port, port->stats.unthrottle); |
| |
| spin_lock_bh(&port->lock); |
| port->mctrl &= ~OOB_RX_THROTTLE; |
| if (C_CRTSCTS(tty)) |
| port->mctrl |= TIOCM_RTS; |
| __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| } |
| |
| static int check_msr_delta(struct fwtty_port *port, unsigned long mask, |
| struct async_icount *prev) |
| { |
| struct async_icount now; |
| int delta; |
| |
| now = port->icount; |
| |
| delta = ((mask & TIOCM_RNG && prev->rng != now.rng) || |
| (mask & TIOCM_DSR && prev->dsr != now.dsr) || |
| (mask & TIOCM_CAR && prev->dcd != now.dcd) || |
| (mask & TIOCM_CTS && prev->cts != now.cts)); |
| |
| *prev = now; |
| |
| return delta; |
| } |
| |
| static int wait_msr_change(struct fwtty_port *port, unsigned long mask) |
| { |
| struct async_icount prev; |
| |
| prev = port->icount; |
| |
| return wait_event_interruptible(port->port.delta_msr_wait, |
| check_msr_delta(port, mask, &prev)); |
| } |
| |
| static int get_serial_info(struct fwtty_port *port, |
| struct serial_struct __user *info) |
| { |
| struct serial_struct tmp; |
| |
| memset(&tmp, 0, sizeof(tmp)); |
| |
| tmp.type = PORT_UNKNOWN; |
| tmp.line = port->port.tty->index; |
| tmp.flags = port->port.flags; |
| tmp.xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN; |
| tmp.baud_base = 400000000; |
| tmp.close_delay = port->port.close_delay; |
| |
| return (copy_to_user(info, &tmp, sizeof(*info))) ? -EFAULT : 0; |
| } |
| |
| static int set_serial_info(struct fwtty_port *port, |
| struct serial_struct __user *info) |
| { |
| struct serial_struct tmp; |
| |
| if (copy_from_user(&tmp, info, sizeof(tmp))) |
| return -EFAULT; |
| |
| if (tmp.irq != 0 || tmp.port != 0 || tmp.custom_divisor != 0 || |
| tmp.baud_base != 400000000) |
| return -EPERM; |
| |
| if (!capable(CAP_SYS_ADMIN)) { |
| if (((tmp.flags & ~ASYNC_USR_MASK) != |
| (port->port.flags & ~ASYNC_USR_MASK))) |
| return -EPERM; |
| } else { |
| port->port.close_delay = tmp.close_delay * HZ / 100; |
| } |
| |
| return 0; |
| } |
| |
| static int fwtty_ioctl(struct tty_struct *tty, unsigned cmd, |
| unsigned long arg) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| int err; |
| |
| switch (cmd) { |
| case TIOCGSERIAL: |
| mutex_lock(&port->port.mutex); |
| err = get_serial_info(port, (void __user *)arg); |
| mutex_unlock(&port->port.mutex); |
| break; |
| |
| case TIOCSSERIAL: |
| mutex_lock(&port->port.mutex); |
| err = set_serial_info(port, (void __user *)arg); |
| mutex_unlock(&port->port.mutex); |
| break; |
| |
| case TIOCMIWAIT: |
| err = wait_msr_change(port, arg); |
| break; |
| |
| default: |
| err = -ENOIOCTLCMD; |
| } |
| |
| return err; |
| } |
| |
| static void fwtty_set_termios(struct tty_struct *tty, struct ktermios *old) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| unsigned baud; |
| |
| spin_lock_bh(&port->lock); |
| baud = set_termios(port, tty); |
| |
| if ((baud == 0) && (old->c_cflag & CBAUD)) { |
| port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS); |
| } else if ((baud != 0) && !(old->c_cflag & CBAUD)) { |
| if (C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags)) |
| port->mctrl |= TIOCM_DTR | TIOCM_RTS; |
| else |
| port->mctrl |= TIOCM_DTR; |
| } |
| __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| |
| if (old->c_cflag & CRTSCTS) { |
| if (!C_CRTSCTS(tty)) { |
| tty->hw_stopped = 0; |
| fwtty_restart_tx(port); |
| } |
| } else if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) { |
| tty->hw_stopped = 1; |
| } |
| } |
| |
| /** |
| * fwtty_break_ctl - start/stop sending breaks |
| * |
| * Signals the remote to start or stop generating simulated breaks. |
| * First, stop dequeueing from the fifo and wait for writer/drain to leave tx |
| * before signalling the break line status. This guarantees any pending rx will |
| * be queued to the line discipline before break is simulated on the remote. |
| * Conversely, turning off break_ctl requires signalling the line status change, |
| * then enabling tx. |
| */ |
| static int fwtty_break_ctl(struct tty_struct *tty, int state) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| long ret; |
| |
| fwtty_dbg(port, "%d\n", state); |
| |
| if (state == -1) { |
| set_bit(STOP_TX, &port->flags); |
| ret = wait_event_interruptible_timeout(port->wait_tx, |
| !test_bit(IN_TX, &port->flags), |
| 10); |
| if (ret == 0 || ret == -ERESTARTSYS) { |
| clear_bit(STOP_TX, &port->flags); |
| fwtty_restart_tx(port); |
| return -EINTR; |
| } |
| } |
| |
| spin_lock_bh(&port->lock); |
| port->break_ctl = (state == -1); |
| __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| |
| if (state == 0) { |
| spin_lock_bh(&port->lock); |
| dma_fifo_reset(&port->tx_fifo); |
| clear_bit(STOP_TX, &port->flags); |
| spin_unlock_bh(&port->lock); |
| } |
| return 0; |
| } |
| |
| static int fwtty_tiocmget(struct tty_struct *tty) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| unsigned tiocm; |
| |
| spin_lock_bh(&port->lock); |
| tiocm = (port->mctrl & MCTRL_MASK) | (port->mstatus & ~MCTRL_MASK); |
| spin_unlock_bh(&port->lock); |
| |
| fwtty_dbg(port, "%x\n", tiocm); |
| |
| return tiocm; |
| } |
| |
| static int fwtty_tiocmset(struct tty_struct *tty, unsigned set, unsigned clear) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| |
| fwtty_dbg(port, "set: %x clear: %x\n", set, clear); |
| |
| /* TODO: simulate loopback if TIOCM_LOOP set */ |
| |
| spin_lock_bh(&port->lock); |
| port->mctrl &= ~(clear & MCTRL_MASK & 0xffff); |
| port->mctrl |= set & MCTRL_MASK & 0xffff; |
| __fwtty_write_port_status(port); |
| spin_unlock_bh(&port->lock); |
| return 0; |
| } |
| |
| static int fwtty_get_icount(struct tty_struct *tty, |
| struct serial_icounter_struct *icount) |
| { |
| struct fwtty_port *port = tty->driver_data; |
| struct stats stats; |
| |
| memcpy(&stats, &port->stats, sizeof(stats)); |
| if (port->port.console) |
| (*port->fwcon_ops->stats)(&stats, port->con_data); |
| |
| icount->cts = port->icount.cts; |
| icount->dsr = port->icount.dsr; |
| icount->rng = port->icount.rng; |
| icount->dcd = port->icount.dcd; |
| icount->rx = port->icount.rx; |
| icount->tx = port->icount.tx + stats.xchars; |
| icount->frame = port->icount.frame; |
| icount->overrun = port->icount.overrun; |
| icount->parity = port->icount.parity; |
| icount->brk = port->icount.brk; |
| icount->buf_overrun = port->icount.overrun; |
| return 0; |
| } |
| |
| static void fwtty_proc_show_port(struct seq_file *m, struct fwtty_port *port) |
| { |
| struct stats stats; |
| |
| memcpy(&stats, &port->stats, sizeof(stats)); |
| if (port->port.console) |
| (*port->fwcon_ops->stats)(&stats, port->con_data); |
| |
| seq_printf(m, " addr:%012llx tx:%d rx:%d", port->rx_handler.offset, |
| port->icount.tx + stats.xchars, port->icount.rx); |
| seq_printf(m, " cts:%d dsr:%d rng:%d dcd:%d", port->icount.cts, |
| port->icount.dsr, port->icount.rng, port->icount.dcd); |
| seq_printf(m, " fe:%d oe:%d pe:%d brk:%d", port->icount.frame, |
| port->icount.overrun, port->icount.parity, port->icount.brk); |
| } |
| |
| static void fwtty_debugfs_show_port(struct seq_file *m, struct fwtty_port *port) |
| { |
| struct stats stats; |
| |
| memcpy(&stats, &port->stats, sizeof(stats)); |
| if (port->port.console) |
| (*port->fwcon_ops->stats)(&stats, port->con_data); |
| |
| seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped, |
| stats.tx_stall, stats.fifo_errs, stats.lost); |
| seq_printf(m, " pkts:%d thr:%d", stats.sent, stats.throttled); |
| |
| if (port->port.console) { |
| seq_puts(m, "\n "); |
| (*port->fwcon_ops->proc_show)(m, port->con_data); |
| } |
| |
| fwtty_dump_profile(m, &port->stats); |
| } |
| |
| static void fwtty_debugfs_show_peer(struct seq_file *m, struct fwtty_peer *peer) |
| { |
| int generation = peer->generation; |
| |
| smp_rmb(); |
| seq_printf(m, " %s:", dev_name(&peer->unit->device)); |
| seq_printf(m, " node:%04x gen:%d", peer->node_id, generation); |
| seq_printf(m, " sp:%d max:%d guid:%016llx", peer->speed, |
| peer->max_payload, (unsigned long long) peer->guid); |
| seq_printf(m, " mgmt:%012llx", (unsigned long long) peer->mgmt_addr); |
| seq_printf(m, " addr:%012llx", (unsigned long long) peer->status_addr); |
| seq_putc(m, '\n'); |
| } |
| |
| static int fwtty_proc_show(struct seq_file *m, void *v) |
| { |
| struct fwtty_port *port; |
| int i; |
| |
| seq_puts(m, "fwserinfo: 1.0 driver: 1.0\n"); |
| for (i = 0; i < MAX_TOTAL_PORTS && (port = fwtty_port_get(i)); ++i) { |
| seq_printf(m, "%2d:", i); |
| if (capable(CAP_SYS_ADMIN)) |
| fwtty_proc_show_port(m, port); |
| fwtty_port_put(port); |
| seq_puts(m, "\n"); |
| } |
| return 0; |
| } |
| |
| static int fwtty_debugfs_stats_show(struct seq_file *m, void *v) |
| { |
| struct fw_serial *serial = m->private; |
| struct fwtty_port *port; |
| int i; |
| |
| for (i = 0; i < num_ports; ++i) { |
| port = fwtty_port_get(serial->ports[i]->index); |
| if (port) { |
| seq_printf(m, "%2d:", port->index); |
| fwtty_proc_show_port(m, port); |
| fwtty_debugfs_show_port(m, port); |
| fwtty_port_put(port); |
| seq_puts(m, "\n"); |
| } |
| } |
| return 0; |
| } |
| |
| static int fwtty_debugfs_peers_show(struct seq_file *m, void *v) |
| { |
| struct fw_serial *serial = m->private; |
| struct fwtty_peer *peer; |
| |
| rcu_read_lock(); |
| seq_printf(m, "card: %s guid: %016llx\n", |
| dev_name(serial->card->device), |
| (unsigned long long) serial->card->guid); |
| list_for_each_entry_rcu(peer, &serial->peer_list, list) |
| fwtty_debugfs_show_peer(m, peer); |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| static int fwtty_proc_open(struct inode *inode, struct file *fp) |
| { |
| return single_open(fp, fwtty_proc_show, NULL); |
| } |
| |
| static int fwtty_stats_open(struct inode *inode, struct file *fp) |
| { |
| return single_open(fp, fwtty_debugfs_stats_show, inode->i_private); |
| } |
| |
| static int fwtty_peers_open(struct inode *inode, struct file *fp) |
| { |
| return single_open(fp, fwtty_debugfs_peers_show, inode->i_private); |
| } |
| |
| static const struct file_operations fwtty_stats_fops = { |
| .owner = THIS_MODULE, |
| .open = fwtty_stats_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static const struct file_operations fwtty_peers_fops = { |
| .owner = THIS_MODULE, |
| .open = fwtty_peers_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static const struct file_operations fwtty_proc_fops = { |
| .owner = THIS_MODULE, |
| .open = fwtty_proc_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static const struct tty_port_operations fwtty_port_ops = { |
| .dtr_rts = fwtty_port_dtr_rts, |
| .carrier_raised = fwtty_port_carrier_raised, |
| .shutdown = fwtty_port_shutdown, |
| .activate = fwtty_port_activate, |
| }; |
| |
| static const struct tty_operations fwtty_ops = { |
| .open = fwtty_open, |
| .close = fwtty_close, |
| .hangup = fwtty_hangup, |
| .cleanup = fwtty_cleanup, |
| .install = fwtty_install, |
| .write = fwtty_write, |
| .write_room = fwtty_write_room, |
| .chars_in_buffer = fwtty_chars_in_buffer, |
| .send_xchar = fwtty_send_xchar, |
| .throttle = fwtty_throttle, |
| .unthrottle = fwtty_unthrottle, |
| .ioctl = fwtty_ioctl, |
| .set_termios = fwtty_set_termios, |
| .break_ctl = fwtty_break_ctl, |
| .tiocmget = fwtty_tiocmget, |
| .tiocmset = fwtty_tiocmset, |
| .get_icount = fwtty_get_icount, |
| .proc_fops = &fwtty_proc_fops, |
| }; |
| |
| static const struct tty_operations fwloop_ops = { |
| .open = fwtty_open, |
| .close = fwtty_close, |
| .hangup = fwtty_hangup, |
| .cleanup = fwtty_cleanup, |
| .install = fwloop_install, |
| .write = fwtty_write, |
| .write_room = fwtty_write_room, |
| .chars_in_buffer = fwtty_chars_in_buffer, |
| .send_xchar = fwtty_send_xchar, |
| .throttle = fwtty_throttle, |
| .unthrottle = fwtty_unthrottle, |
| .ioctl = fwtty_ioctl, |
| .set_termios = fwtty_set_termios, |
| .break_ctl = fwtty_break_ctl, |
| .tiocmget = fwtty_tiocmget, |
| .tiocmset = fwtty_tiocmset, |
| .get_icount = fwtty_get_icount, |
| }; |
| |
| static inline int mgmt_pkt_expected_len(__be16 code) |
| { |
| static const struct fwserial_mgmt_pkt pkt; |
| |
| switch (be16_to_cpu(code)) { |
| case FWSC_VIRT_CABLE_PLUG: |
| return sizeof(pkt.hdr) + sizeof(pkt.plug_req); |
| |
| case FWSC_VIRT_CABLE_PLUG_RSP: /* | FWSC_RSP_OK */ |
| return sizeof(pkt.hdr) + sizeof(pkt.plug_rsp); |
| |
| case FWSC_VIRT_CABLE_UNPLUG: |
| case FWSC_VIRT_CABLE_UNPLUG_RSP: |
| case FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK: |
| case FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK: |
| return sizeof(pkt.hdr); |
| |
| default: |
| return -1; |
| } |
| } |
| |
| static inline void fill_plug_params(struct virt_plug_params *params, |
| struct fwtty_port *port) |
| { |
| u64 status_addr = port->rx_handler.offset; |
| u64 fifo_addr = port->rx_handler.offset + 4; |
| size_t fifo_len = port->rx_handler.length - 4; |
| |
| params->status_hi = cpu_to_be32(status_addr >> 32); |
| params->status_lo = cpu_to_be32(status_addr); |
| params->fifo_hi = cpu_to_be32(fifo_addr >> 32); |
| params->fifo_lo = cpu_to_be32(fifo_addr); |
| params->fifo_len = cpu_to_be32(fifo_len); |
| } |
| |
| static inline void fill_plug_req(struct fwserial_mgmt_pkt *pkt, |
| struct fwtty_port *port) |
| { |
| pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG); |
| pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); |
| fill_plug_params(&pkt->plug_req, port); |
| } |
| |
| static inline void fill_plug_rsp_ok(struct fwserial_mgmt_pkt *pkt, |
| struct fwtty_port *port) |
| { |
| pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP); |
| pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); |
| fill_plug_params(&pkt->plug_rsp, port); |
| } |
| |
| static inline void fill_plug_rsp_nack(struct fwserial_mgmt_pkt *pkt) |
| { |
| pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK); |
| pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); |
| } |
| |
| static inline void fill_unplug_req(struct fwserial_mgmt_pkt *pkt) |
| { |
| pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG); |
| pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); |
| } |
| |
| static inline void fill_unplug_rsp_nack(struct fwserial_mgmt_pkt *pkt) |
| { |
| pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK); |
| pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); |
| } |
| |
| static inline void fill_unplug_rsp_ok(struct fwserial_mgmt_pkt *pkt) |
| { |
| pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP); |
| pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); |
| } |
| |
| static void fwserial_virt_plug_complete(struct fwtty_peer *peer, |
| struct virt_plug_params *params) |
| { |
| struct fwtty_port *port = peer->port; |
| |
| peer->status_addr = be32_to_u64(params->status_hi, params->status_lo); |
| peer->fifo_addr = be32_to_u64(params->fifo_hi, params->fifo_lo); |
| peer->fifo_len = be32_to_cpu(params->fifo_len); |
| peer_set_state(peer, FWPS_ATTACHED); |
| |
| /* reconfigure tx_fifo optimally for this peer */ |
| spin_lock_bh(&port->lock); |
| port->max_payload = min(peer->max_payload, peer->fifo_len); |
| dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload); |
| spin_unlock_bh(&peer->port->lock); |
| |
| if (port->port.console && port->fwcon_ops->notify != NULL) |
| (*port->fwcon_ops->notify)(FWCON_NOTIFY_ATTACH, port->con_data); |
| |
| fwtty_info(&peer->unit, "peer (guid:%016llx) connected on %s\n", |
| (unsigned long long)peer->guid, dev_name(port->device)); |
| } |
| |
| static inline int fwserial_send_mgmt_sync(struct fwtty_peer *peer, |
| struct fwserial_mgmt_pkt *pkt) |
| { |
| int generation; |
| int rcode, tries = 5; |
| |
| do { |
| generation = peer->generation; |
| smp_rmb(); |
| |
| rcode = fw_run_transaction(peer->serial->card, |
| TCODE_WRITE_BLOCK_REQUEST, |
| peer->node_id, |
| generation, peer->speed, |
| peer->mgmt_addr, |
| pkt, be16_to_cpu(pkt->hdr.len)); |
| if (rcode == RCODE_BUSY || rcode == RCODE_SEND_ERROR || |
| rcode == RCODE_GENERATION) { |
| fwtty_dbg(&peer->unit, "mgmt write error: %d\n", rcode); |
| continue; |
| } else { |
| break; |
| } |
| } while (--tries > 0); |
| return rcode; |
| } |
| |
| /** |
| * fwserial_claim_port - attempt to claim port @ index for peer |
| * |
| * Returns ptr to claimed port or error code (as ERR_PTR()) |
| * Can sleep - must be called from process context |
| */ |
| static struct fwtty_port *fwserial_claim_port(struct fwtty_peer *peer, |
| int index) |
| { |
| struct fwtty_port *port; |
| |
| if (index < 0 || index >= num_ports) |
| return ERR_PTR(-EINVAL); |
| |
| /* must guarantee that previous port releases have completed */ |
| synchronize_rcu(); |
| |
| port = peer->serial->ports[index]; |
| spin_lock_bh(&port->lock); |
| if (!rcu_access_pointer(port->peer)) |
| rcu_assign_pointer(port->peer, peer); |
| else |
| port = ERR_PTR(-EBUSY); |
| spin_unlock_bh(&port->lock); |
| |
| return port; |
| } |
| |
| /** |
| * fwserial_find_port - find avail port and claim for peer |
| * |
| * Returns ptr to claimed port or NULL if none avail |
| * Can sleep - must be called from process context |
| */ |
| static struct fwtty_port *fwserial_find_port(struct fwtty_peer *peer) |
| { |
| struct fwtty_port **ports = peer->serial->ports; |
| int i; |
| |
| /* must guarantee that previous port releases have completed */ |
| synchronize_rcu(); |
| |
| /* TODO: implement optional GUID-to-specific port # matching */ |
| |
| /* find an unattached port (but not the loopback port, if present) */ |
| for (i = 0; i < num_ttys; ++i) { |
| spin_lock_bh(&ports[i]->lock); |
| if (!ports[i]->peer) { |
| /* claim port */ |
| rcu_assign_pointer(ports[i]->peer, peer); |
| spin_unlock_bh(&ports[i]->lock); |
| return ports[i]; |
| } |
| spin_unlock_bh(&ports[i]->lock); |
| } |
| return NULL; |
| } |
| |
| static void fwserial_release_port(struct fwtty_port *port, bool reset) |
| { |
| /* drop carrier (and all other line status) */ |
| if (reset) |
| fwtty_update_port_status(port, 0); |
| |
| spin_lock_bh(&port->lock); |
| |
| /* reset dma fifo max transmission size back to S100 */ |
| port->max_payload = link_speed_to_max_payload(SCODE_100); |
| dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload); |
| |
| RCU_INIT_POINTER(port->peer, NULL); |
| spin_unlock_bh(&port->lock); |
| |
| if (port->port.console && port->fwcon_ops->notify != NULL) |
| (*port->fwcon_ops->notify)(FWCON_NOTIFY_DETACH, port->con_data); |
| } |
| |
| static void fwserial_plug_timeout(unsigned long data) |
| { |
| struct fwtty_peer *peer = (struct fwtty_peer *)data; |
| struct fwtty_port *port; |
| |
| spin_lock_bh(&peer->lock); |
| if (peer->state != FWPS_PLUG_PENDING) { |
| spin_unlock_bh(&peer->lock); |
| return; |
| } |
| |
| port = peer_revert_state(peer); |
| spin_unlock_bh(&peer->lock); |
| |
| if (port) |
| fwserial_release_port(port, false); |
| } |
| |
| /** |
| * fwserial_connect_peer - initiate virtual cable with peer |
| * |
| * Returns 0 if VIRT_CABLE_PLUG request was successfully sent, |
| * otherwise error code. Must be called from process context. |
| */ |
| static int fwserial_connect_peer(struct fwtty_peer *peer) |
| { |
| struct fwtty_port *port; |
| struct fwserial_mgmt_pkt *pkt; |
| int err, rcode; |
| |
| pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); |
| if (!pkt) |
| return -ENOMEM; |
| |
| port = fwserial_find_port(peer); |
| if (!port) { |
| fwtty_err(&peer->unit, "avail ports in use\n"); |
| err = -EBUSY; |
| goto free_pkt; |
| } |
| |
| spin_lock_bh(&peer->lock); |
| |
| /* only initiate VIRT_CABLE_PLUG if peer is currently not attached */ |
| if (peer->state != FWPS_NOT_ATTACHED) { |
| err = -EBUSY; |
| goto release_port; |
| } |
| |
| peer->port = port; |
| peer_set_state(peer, FWPS_PLUG_PENDING); |
| |
| fill_plug_req(pkt, peer->port); |
| |
| setup_timer(&peer->timer, fwserial_plug_timeout, (unsigned long)peer); |
| mod_timer(&peer->timer, jiffies + VIRT_CABLE_PLUG_TIMEOUT); |
| spin_unlock_bh(&peer->lock); |
| |
| rcode = fwserial_send_mgmt_sync(peer, pkt); |
| |
| spin_lock_bh(&peer->lock); |
| if (peer->state == FWPS_PLUG_PENDING && rcode != RCODE_COMPLETE) { |
| if (rcode == RCODE_CONFLICT_ERROR) |
| err = -EAGAIN; |
| else |
| err = -EIO; |
| goto cancel_timer; |
| } |
| spin_unlock_bh(&peer->lock); |
| |
| kfree(pkt); |
| return 0; |
| |
| cancel_timer: |
| del_timer(&peer->timer); |
| peer_revert_state(peer); |
| release_port: |
| spin_unlock_bh(&peer->lock); |
| fwserial_release_port(port, false); |
| free_pkt: |
| kfree(pkt); |
| return err; |
| } |
| |
| /** |
| * fwserial_close_port - |
| * HUP the tty (if the tty exists) and unregister the tty device. |
| * Only used by the unit driver upon unit removal to disconnect and |
| * cleanup all attached ports |
| * |
| * The port reference is put by fwtty_cleanup (if a reference was |
| * ever taken). |
| */ |
| static void fwserial_close_port(struct tty_driver *driver, |
| struct fwtty_port *port) |
| { |
| struct tty_struct *tty; |
| |
| mutex_lock(&port->port.mutex); |
| tty = tty_port_tty_get(&port->port); |
| if (tty) { |
| tty_vhangup(tty); |
| tty_kref_put(tty); |
| } |
| mutex_unlock(&port->port.mutex); |
| |
| if (driver == fwloop_driver) |
| tty_unregister_device(driver, loop_idx(port)); |
| else |
| tty_unregister_device(driver, port->index); |
| } |
| |
| /** |
| * fwserial_lookup - finds first fw_serial associated with card |
| * @card: fw_card to match |
| * |
| * NB: caller must be holding fwserial_list_mutex |
| */ |
| static struct fw_serial *fwserial_lookup(struct fw_card *card) |
| { |
| struct fw_serial *serial; |
| |
| list_for_each_entry(serial, &fwserial_list, list) { |
| if (card == serial->card) |
| return serial; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * __fwserial_lookup_rcu - finds first fw_serial associated with card |
| * @card: fw_card to match |
| * |
| * NB: caller must be inside rcu_read_lock() section |
| */ |
| static struct fw_serial *__fwserial_lookup_rcu(struct fw_card *card) |
| { |
| struct fw_serial *serial; |
| |
| list_for_each_entry_rcu(serial, &fwserial_list, list) { |
| if (card == serial->card) |
| return serial; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * __fwserial_peer_by_node_id - finds a peer matching the given generation + id |
| * |
| * If a matching peer could not be found for the specified generation/node id, |
| * this could be because: |
| * a) the generation has changed and one of the nodes hasn't updated yet |
| * b) the remote node has created its remote unit device before this |
| * local node has created its corresponding remote unit device |
| * In either case, the remote node should retry |
| * |
| * Note: caller must be in rcu_read_lock() section |
| */ |
| static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card, |
| int generation, int id) |
| { |
| struct fw_serial *serial; |
| struct fwtty_peer *peer; |
| |
| serial = __fwserial_lookup_rcu(card); |
| if (!serial) { |
| /* |
| * Something is very wrong - there should be a matching |
| * fw_serial structure for every fw_card. Maybe the remote node |
| * has created its remote unit device before this driver has |
| * been probed for any unit devices... |
| */ |
| fwtty_err(card, "unknown card (guid %016llx)\n", |
| (unsigned long long) card->guid); |
| return NULL; |
| } |
| |
| list_for_each_entry_rcu(peer, &serial->peer_list, list) { |
| int g = peer->generation; |
| |
| smp_rmb(); |
| if (generation == g && id == peer->node_id) |
| return peer; |
| } |
| |
| return NULL; |
| } |
| |
| #ifdef DEBUG |
| static void __dump_peer_list(struct fw_card *card) |
| { |
| struct fw_serial *serial; |
| struct fwtty_peer *peer; |
| |
| serial = __fwserial_lookup_rcu(card); |
| if (!serial) |
| return; |
| |
| list_for_each_entry_rcu(peer, &serial->peer_list, list) { |
| int g = peer->generation; |
| |
| smp_rmb(); |
| fwtty_dbg(card, "peer(%d:%x) guid: %016llx\n", |
| g, peer->node_id, (unsigned long long) peer->guid); |
| } |
| } |
| #else |
| #define __dump_peer_list(s) |
| #endif |
| |
| static void fwserial_auto_connect(struct work_struct *work) |
| { |
| struct fwtty_peer *peer = to_peer(to_delayed_work(work), connect); |
| int err; |
| |
| err = fwserial_connect_peer(peer); |
| if (err == -EAGAIN && ++peer->connect_retries < MAX_CONNECT_RETRIES) |
| schedule_delayed_work(&peer->connect, CONNECT_RETRY_DELAY); |
| } |
| |
| static void fwserial_peer_workfn(struct work_struct *work) |
| { |
| struct fwtty_peer *peer = to_peer(work, work); |
| |
| peer->workfn(work); |
| } |
| |
| /** |
| * fwserial_add_peer - add a newly probed 'serial' unit device as a 'peer' |
| * @serial: aggregate representing the specific fw_card to add the peer to |
| * @unit: 'peer' to create and add to peer_list of serial |
| * |
| * Adds a 'peer' (ie, a local or remote 'serial' unit device) to the list of |
| * peers for a specific fw_card. Optionally, auto-attach this peer to an |
| * available tty port. This function is called either directly or indirectly |
| * as a result of a 'serial' unit device being created & probed. |
| * |
| * Note: this function is serialized with fwserial_remove_peer() by the |
| * fwserial_list_mutex held in fwserial_probe(). |
| * |
| * A 1:1 correspondence between an fw_unit and an fwtty_peer is maintained |
| * via the dev_set_drvdata() for the device of the fw_unit. |
| */ |
| static int fwserial_add_peer(struct fw_serial *serial, struct fw_unit *unit) |
| { |
| struct device *dev = &unit->device; |
| struct fw_device *parent = fw_parent_device(unit); |
| struct fwtty_peer *peer; |
| struct fw_csr_iterator ci; |
| int key, val; |
| int generation; |
| |
| peer = kzalloc(sizeof(*peer), GFP_KERNEL); |
| if (!peer) |
| return -ENOMEM; |
| |
| peer_set_state(peer, FWPS_NOT_ATTACHED); |
| |
| dev_set_drvdata(dev, peer); |
| peer->unit = unit; |
| peer->guid = (u64)parent->config_rom[3] << 32 | parent->config_rom[4]; |
| peer->speed = parent->max_speed; |
| peer->max_payload = min(device_max_receive(parent), |
| link_speed_to_max_payload(peer->speed)); |
| |
| generation = parent->generation; |
| smp_rmb(); |
| peer->node_id = parent->node_id; |
| smp_wmb(); |
| peer->generation = generation; |
| |
| /* retrieve the mgmt bus addr from the unit directory */ |
| fw_csr_iterator_init(&ci, unit->directory); |
| while (fw_csr_iterator_next(&ci, &key, &val)) { |
| if (key == (CSR_OFFSET | CSR_DEPENDENT_INFO)) { |
| peer->mgmt_addr = CSR_REGISTER_BASE + 4 * val; |
| break; |
| } |
| } |
| if (peer->mgmt_addr == 0ULL) { |
| /* |
| * No mgmt address effectively disables VIRT_CABLE_PLUG - |
| * this peer will not be able to attach to a remote |
| */ |
| peer_set_state(peer, FWPS_NO_MGMT_ADDR); |
| } |
| |
| spin_lock_init(&peer->lock); |
| peer->port = NULL; |
| |
| init_timer(&peer->timer); |
| INIT_WORK(&peer->work, fwserial_peer_workfn); |
| INIT_DELAYED_WORK(&peer->connect, fwserial_auto_connect); |
| |
| /* associate peer with specific fw_card */ |
| peer->serial = serial; |
| list_add_rcu(&peer->list, &serial->peer_list); |
| |
| fwtty_info(&peer->unit, "peer added (guid:%016llx)\n", |
| (unsigned long long)peer->guid); |
| |
| /* identify the local unit & virt cable to loopback port */ |
| if (parent->is_local) { |
| serial->self = peer; |
| if (create_loop_dev) { |
| struct fwtty_port *port; |
| |
| port = fwserial_claim_port(peer, num_ttys); |
| if (!IS_ERR(port)) { |
| struct virt_plug_params params; |
| |
| spin_lock_bh(&peer->lock); |
| peer->port = port; |
| fill_plug_params(¶ms, port); |
| fwserial_virt_plug_complete(peer, ¶ms); |
| spin_unlock_bh(&peer->lock); |
| |
| fwtty_write_port_status(port); |
| } |
| } |
| |
| } else if (auto_connect) { |
| /* auto-attach to remote units only (if policy allows) */ |
| schedule_delayed_work(&peer->connect, 1); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * fwserial_remove_peer - remove a 'serial' unit device as a 'peer' |
| * |
| * Remove a 'peer' from its list of peers. This function is only |
| * called by fwserial_remove() on bus removal of the unit device. |
| * |
| * Note: this function is serialized with fwserial_add_peer() by the |
| * fwserial_list_mutex held in fwserial_remove(). |
| */ |
| static void fwserial_remove_peer(struct fwtty_peer *peer) |
| { |
| struct fwtty_port *port; |
| |
| spin_lock_bh(&peer->lock); |
| peer_set_state(peer, FWPS_GONE); |
| spin_unlock_bh(&peer->lock); |
| |
| cancel_delayed_work_sync(&peer->connect); |
| cancel_work_sync(&peer->work); |
| |
| spin_lock_bh(&peer->lock); |
| /* if this unit is the local unit, clear link */ |
| if (peer == peer->serial->self) |
| peer->serial->self = NULL; |
| |
| /* cancel the request timeout timer (if running) */ |
| del_timer(&peer->timer); |
| |
| port = peer->port; |
| peer->port = NULL; |
| |
| list_del_rcu(&peer->list); |
| |
| fwtty_info(&peer->unit, "peer removed (guid:%016llx)\n", |
| (unsigned long long)peer->guid); |
| |
| spin_unlock_bh(&peer->lock); |
| |
| if (port) |
| fwserial_release_port(port, true); |
| |
| synchronize_rcu(); |
| kfree(peer); |
| } |
| |
| /** |
| * fwserial_create - init everything to create TTYs for a specific fw_card |
| * @unit: fw_unit for first 'serial' unit device probed for this fw_card |
| * |
| * This function inits the aggregate structure (an fw_serial instance) |
| * used to manage the TTY ports registered by a specific fw_card. Also, the |
| * unit device is added as the first 'peer'. |
| * |
| * This unit device may represent a local unit device (as specified by the |
| * config ROM unit directory) or it may represent a remote unit device |
| * (as specified by the reading of the remote node's config ROM). |
| * |
| * Returns 0 to indicate "ownership" of the unit device, or a negative errno |
| * value to indicate which error. |
| */ |
| static int fwserial_create(struct fw_unit *unit) |
| { |
| struct fw_device *parent = fw_parent_device(unit); |
| struct fw_card *card = parent->card; |
| struct fw_serial *serial; |
| struct fwtty_port *port; |
| struct device *tty_dev; |
| int i, j; |
| int err; |
| |
| serial = kzalloc(sizeof(*serial), GFP_KERNEL); |
| if (!serial) |
| return -ENOMEM; |
| |
| kref_init(&serial->kref); |
| serial->card = card; |
| INIT_LIST_HEAD(&serial->peer_list); |
| |
| for (i = 0; i < num_ports; ++i) { |
| port = kzalloc(sizeof(*port), GFP_KERNEL); |
| if (!port) { |
| err = -ENOMEM; |
| goto free_ports; |
| } |
| tty_port_init(&port->port); |
| port->index = FWTTY_INVALID_INDEX; |
| port->port.ops = &fwtty_port_ops; |
| port->serial = serial; |
| tty_buffer_set_limit(&port->port, 128 * 1024); |
| |
| spin_lock_init(&port->lock); |
| INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx); |
| INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks); |
| INIT_WORK(&port->hangup, fwtty_do_hangup); |
| init_waitqueue_head(&port->wait_tx); |
| port->max_payload = link_speed_to_max_payload(SCODE_100); |
| dma_fifo_init(&port->tx_fifo); |
| |
| RCU_INIT_POINTER(port->peer, NULL); |
| serial->ports[i] = port; |
| |
| /* get unique bus addr region for port's status & recv fifo */ |
| port->rx_handler.length = FWTTY_PORT_RXFIFO_LEN + 4; |
| port->rx_handler.address_callback = fwtty_port_handler; |
| port->rx_handler.callback_data = port; |
| /* |
| * XXX: use custom memory region above cpu physical memory addrs |
| * this will ease porting to 64-bit firewire adapters |
| */ |
| err = fw_core_add_address_handler(&port->rx_handler, |
| &fw_high_memory_region); |
| if (err) { |
| kfree(port); |
| goto free_ports; |
| } |
| } |
| /* preserve i for error cleanup */ |
| |
| err = fwtty_ports_add(serial); |
| if (err) { |
| fwtty_err(&unit, "no space in port table\n"); |
| goto free_ports; |
| } |
| |
| for (j = 0; j < num_ttys; ++j) { |
| tty_dev = tty_port_register_device(&serial->ports[j]->port, |
| fwtty_driver, |
| serial->ports[j]->index, |
| card->device); |
| if (IS_ERR(tty_dev)) { |
| err = PTR_ERR(tty_dev); |
| fwtty_err(&unit, "register tty device error (%d)\n", |
| err); |
| goto unregister_ttys; |
| } |
| |
| serial->ports[j]->device = tty_dev; |
| } |
| /* preserve j for error cleanup */ |
| |
| if (create_loop_dev) { |
| struct device *loop_dev; |
| |
| loop_dev = tty_port_register_device(&serial->ports[j]->port, |
| fwloop_driver, |
| loop_idx(serial->ports[j]), |
| card->device); |
| if (IS_ERR(loop_dev)) { |
| err = PTR_ERR(loop_dev); |
| fwtty_err(&unit, "create loop device failed (%d)\n", |
| err); |
| goto unregister_ttys; |
| } |
| serial->ports[j]->device = loop_dev; |
| serial->ports[j]->loopback = true; |
| } |
| |
| if (!IS_ERR_OR_NULL(fwserial_debugfs)) { |
| serial->debugfs = debugfs_create_dir(dev_name(&unit->device), |
| fwserial_debugfs); |
| if (!IS_ERR_OR_NULL(serial->debugfs)) { |
| debugfs_create_file("peers", 0444, serial->debugfs, |
| serial, &fwtty_peers_fops); |
| debugfs_create_file("stats", 0444, serial->debugfs, |
| serial, &fwtty_stats_fops); |
| } |
| } |
| |
| list_add_rcu(&serial->list, &fwserial_list); |
| |
| fwtty_notice(&unit, "TTY over FireWire on device %s (guid %016llx)\n", |
| dev_name(card->device), (unsigned long long) card->guid); |
| |
| err = fwserial_add_peer(serial, unit); |
| if (!err) |
| return 0; |
| |
| fwtty_err(&unit, "unable to add peer unit device (%d)\n", err); |
| |
| /* fall-through to error processing */ |
| debugfs_remove_recursive(serial->debugfs); |
| |
| list_del_rcu(&serial->list); |
| if (create_loop_dev) |
| tty_unregister_device(fwloop_driver, |
| loop_idx(serial->ports[j])); |
| unregister_ttys: |
| for (--j; j >= 0; --j) |
| tty_unregister_device(fwtty_driver, serial->ports[j]->index); |
| kref_put(&serial->kref, fwserial_destroy); |
| return err; |
| |
| free_ports: |
| for (--i; i >= 0; --i) { |
| tty_port_destroy(&serial->ports[i]->port); |
| kfree(serial->ports[i]); |
| } |
| kfree(serial); |
| return err; |
| } |
| |
| /** |
| * fwserial_probe: bus probe function for firewire 'serial' unit devices |
| * |
| * A 'serial' unit device is created and probed as a result of: |
| * - declaring a ieee1394 bus id table for 'devices' matching a fabricated |
| * 'serial' unit specifier id |
| * - adding a unit directory to the config ROM(s) for a 'serial' unit |
| * |
| * The firewire core registers unit devices by enumerating unit directories |
| * of a node's config ROM after reading the config ROM when a new node is |
| * added to the bus topology after a bus reset. |
| * |
| * The practical implications of this are: |
| * - this probe is called for both local and remote nodes that have a 'serial' |
| * unit directory in their config ROM (that matches the specifiers in |
| * fwserial_id_table). |
| * - no specific order is enforced for local vs. remote unit devices |
| * |
| * This unit driver copes with the lack of specific order in the same way the |
| * firewire net driver does -- each probe, for either a local or remote unit |
| * device, is treated as a 'peer' (has a struct fwtty_peer instance) and the |
| * first peer created for a given fw_card (tracked by the global fwserial_list) |
| * creates the underlying TTYs (aggregated in a fw_serial instance). |
| * |
| * NB: an early attempt to differentiate local & remote unit devices by creating |
| * peers only for remote units and fw_serial instances (with their |
| * associated TTY devices) only for local units was discarded. Managing |
| * the peer lifetimes on device removal proved too complicated. |
| * |
| * fwserial_probe/fwserial_remove are effectively serialized by the |
| * fwserial_list_mutex. This is necessary because the addition of the first peer |
| * for a given fw_card will trigger the creation of the fw_serial for that |
| * fw_card, which must not simultaneously contend with the removal of the |
| * last peer for a given fw_card triggering the destruction of the same |
| * fw_serial for the same fw_card. |
| */ |
| static int fwserial_probe(struct fw_unit *unit, |
| const struct ieee1394_device_id *id) |
| { |
| struct fw_serial *serial; |
| int err; |
| |
| mutex_lock(&fwserial_list_mutex); |
| serial = fwserial_lookup(fw_parent_device(unit)->card); |
| if (!serial) |
| err = fwserial_create(unit); |
| else |
| err = fwserial_add_peer(serial, unit); |
| mutex_unlock(&fwserial_list_mutex); |
| return err; |
| } |
| |
| /** |
| * fwserial_remove: bus removal function for firewire 'serial' unit devices |
| * |
| * The corresponding 'peer' for this unit device is removed from the list of |
| * peers for the associated fw_serial (which has a 1:1 correspondence with a |
| * specific fw_card). If this is the last peer being removed, then trigger |
| * the destruction of the underlying TTYs. |
| */ |
| static void fwserial_remove(struct fw_unit *unit) |
| { |
| struct fwtty_peer *peer = dev_get_drvdata(&unit->device); |
| struct fw_serial *serial = peer->serial; |
| int i; |
| |
| mutex_lock(&fwserial_list_mutex); |
| fwserial_remove_peer(peer); |
| |
| if (list_empty(&serial->peer_list)) { |
| /* unlink from the fwserial_list here */ |
| list_del_rcu(&serial->list); |
| |
| debugfs_remove_recursive(serial->debugfs); |
| |
| for (i = 0; i < num_ttys; ++i) |
| fwserial_close_port(fwtty_driver, serial->ports[i]); |
| if (create_loop_dev) |
| fwserial_close_port(fwloop_driver, serial->ports[i]); |
| kref_put(&serial->kref, fwserial_destroy); |
| } |
| mutex_unlock(&fwserial_list_mutex); |
| } |
| |
| /** |
| * fwserial_update: bus update function for 'firewire' serial unit devices |
| * |
| * Updates the new node_id and bus generation for this peer. Note that locking |
| * is unnecessary; but careful memory barrier usage is important to enforce the |
| * load and store order of generation & node_id. |
| * |
| * The fw-core orders the write of node_id before generation in the parent |
| * fw_device to ensure that a stale node_id cannot be used with a current |
| * bus generation. So the generation value must be read before the node_id. |
| * |
| * In turn, this orders the write of node_id before generation in the peer to |
| * also ensure a stale node_id cannot be used with a current bus generation. |
| */ |
| static void fwserial_update(struct fw_unit *unit) |
| { |
| struct fw_device *parent = fw_parent_device(unit); |
| struct fwtty_peer *peer = dev_get_drvdata(&unit->device); |
| int generation; |
| |
| generation = parent->generation; |
| smp_rmb(); |
| peer->node_id = parent->node_id; |
| smp_wmb(); |
| peer->generation = generation; |
| } |
| |
| static const struct ieee1394_device_id fwserial_id_table[] = { |
| { |
| .match_flags = IEEE1394_MATCH_SPECIFIER_ID | |
| IEEE1394_MATCH_VERSION, |
| .specifier_id = LINUX_VENDOR_ID, |
| .version = FWSERIAL_VERSION, |
| }, |
| { } |
| }; |
| |
| static struct fw_driver fwserial_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = KBUILD_MODNAME, |
| .bus = &fw_bus_type, |
| }, |
| .probe = fwserial_probe, |
| .update = fwserial_update, |
| .remove = fwserial_remove, |
| .id_table = fwserial_id_table, |
| }; |
| |
| #define FW_UNIT_SPECIFIER(id) ((CSR_SPECIFIER_ID << 24) | (id)) |
| #define FW_UNIT_VERSION(ver) ((CSR_VERSION << 24) | (ver)) |
| #define FW_UNIT_ADDRESS(ofs) (((CSR_OFFSET | CSR_DEPENDENT_INFO) << 24) \ |
| | (((ofs) - CSR_REGISTER_BASE) >> 2)) |
| /* XXX: config ROM definitons could be improved with semi-automated offset |
| * and length calculation |
| */ |
| #define FW_ROM_LEN(quads) ((quads) << 16) |
| #define FW_ROM_DESCRIPTOR(ofs) (((CSR_LEAF | CSR_DESCRIPTOR) << 24) | (ofs)) |
| |
| struct fwserial_unit_directory_data { |
| u32 len_crc; |
| u32 unit_specifier; |
| u32 unit_sw_version; |
| u32 unit_addr_offset; |
| u32 desc1_ofs; |
| u32 desc1_len_crc; |
| u32 desc1_data[5]; |
| } __packed; |
| |
| static struct fwserial_unit_directory_data fwserial_unit_directory_data = { |
| .len_crc = FW_ROM_LEN(4), |
| .unit_specifier = FW_UNIT_SPECIFIER(LINUX_VENDOR_ID), |
| .unit_sw_version = FW_UNIT_VERSION(FWSERIAL_VERSION), |
| .desc1_ofs = FW_ROM_DESCRIPTOR(1), |
| .desc1_len_crc = FW_ROM_LEN(5), |
| .desc1_data = { |
| 0x00000000, /* type = text */ |
| 0x00000000, /* enc = ASCII, lang EN */ |
| 0x4c696e75, /* 'Linux TTY' */ |
| 0x78205454, |
| 0x59000000, |
| }, |
| }; |
| |
| static struct fw_descriptor fwserial_unit_directory = { |
| .length = sizeof(fwserial_unit_directory_data) / sizeof(u32), |
| .key = (CSR_DIRECTORY | CSR_UNIT) << 24, |
| .data = (u32 *)&fwserial_unit_directory_data, |
| }; |
| |
| /* |
| * The management address is in the unit space region but above other known |
| * address users (to keep wild writes from causing havoc) |
| */ |
| static const struct fw_address_region fwserial_mgmt_addr_region = { |
| .start = CSR_REGISTER_BASE + 0x1e0000ULL, |
| .end = 0x1000000000000ULL, |
| }; |
| |
| static struct fw_address_handler fwserial_mgmt_addr_handler; |
| |
| /** |
| * fwserial_handle_plug_req - handle VIRT_CABLE_PLUG request work |
| * @work: ptr to peer->work |
| * |
| * Attempts to complete the VIRT_CABLE_PLUG handshake sequence for this peer. |
| * |
| * This checks for a collided request-- ie, that a VIRT_CABLE_PLUG request was |
| * already sent to this peer. If so, the collision is resolved by comparing |
| * guid values; the loser sends the plug response. |
| * |
| * Note: if an error prevents a response, don't do anything -- the |
| * remote will timeout its request. |
| */ |
| static void fwserial_handle_plug_req(struct work_struct *work) |
| { |
| struct fwtty_peer *peer = to_peer(work, work); |
| struct virt_plug_params *plug_req = &peer->work_params.plug_req; |
| struct fwtty_port *port; |
| struct fwserial_mgmt_pkt *pkt; |
| int rcode; |
| |
| pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); |
| if (!pkt) |
| return; |
| |
| port = fwserial_find_port(peer); |
| |
| spin_lock_bh(&peer->lock); |
| |
| switch (peer->state) { |
| case FWPS_NOT_ATTACHED: |
| if (!port) { |
| fwtty_err(&peer->unit, "no more ports avail\n"); |
| fill_plug_rsp_nack(pkt); |
| } else { |
| peer->port = port; |
| fill_plug_rsp_ok(pkt, peer->port); |
| peer_set_state(peer, FWPS_PLUG_RESPONDING); |
| /* don't release claimed port */ |
| port = NULL; |
| } |
| break; |
| |
| case FWPS_PLUG_PENDING: |
| if (peer->serial->card->guid > peer->guid) |
| goto cleanup; |
| |
| /* We lost - hijack the already-claimed port and send ok */ |
| del_timer(&peer->timer); |
| fill_plug_rsp_ok(pkt, peer->port); |
| peer_set_state(peer, FWPS_PLUG_RESPONDING); |
| break; |
| |
| default: |
| fill_plug_rsp_nack(pkt); |
| } |
| |
| spin_unlock_bh(&peer->lock); |
| if (port) |
| fwserial_release_port(port, false); |
| |
| rcode = fwserial_send_mgmt_sync(peer, pkt); |
| |
| spin_lock_bh(&peer->lock); |
| if (peer->state == FWPS_PLUG_RESPONDING) { |
| if (rcode == RCODE_COMPLETE) { |
| struct fwtty_port *tmp = peer->port; |
| |
| fwserial_virt_plug_complete(peer, plug_req); |
| spin_unlock_bh(&peer->lock); |
| |
| fwtty_write_port_status(tmp); |
| spin_lock_bh(&peer->lock); |
| } else { |
| fwtty_err(&peer->unit, "PLUG_RSP error (%d)\n", rcode); |
| port = peer_revert_state(peer); |
| } |
| } |
| cleanup: |
| spin_unlock_bh(&peer->lock); |
| if (port) |
| fwserial_release_port(port, false); |
| kfree(pkt); |
| } |
| |
| static void fwserial_handle_unplug_req(struct work_struct *work) |
| { |
| struct fwtty_peer *peer = to_peer(work, work); |
| struct fwtty_port *port = NULL; |
| struct fwserial_mgmt_pkt *pkt; |
| int rcode; |
| |
| pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); |
| if (!pkt) |
| return; |
| |
| spin_lock_bh(&peer->lock); |
| |
| switch (peer->state) { |
| case FWPS_ATTACHED: |
| fill_unplug_rsp_ok(pkt); |
| peer_set_state(peer, FWPS_UNPLUG_RESPONDING); |
| break; |
| |
| case FWPS_UNPLUG_PENDING: |
| if (peer->serial->card->guid > peer->guid) |
| goto cleanup; |
| |
| /* We lost - send unplug rsp */ |
| del_timer(&peer->timer); |
| fill_unplug_rsp_ok(pkt); |
| peer_set_state(peer, FWPS_UNPLUG_RESPONDING); |
| break; |
| |
| default: |
| fill_unplug_rsp_nack(pkt); |
| } |
| |
| spin_unlock_bh(&peer->lock); |
| |
| rcode = fwserial_send_mgmt_sync(peer, pkt); |
| |
| spin_lock_bh(&peer->lock); |
| if (peer->state == FWPS_UNPLUG_RESPONDING) { |
| if (rcode != RCODE_COMPLETE) |
| fwtty_err(&peer->unit, "UNPLUG_RSP error (%d)\n", |
| rcode); |
| port = peer_revert_state(peer); |
| } |
| cleanup: |
| spin_unlock_bh(&peer->lock); |
| if (port) |
| fwserial_release_port(port, true); |
| kfree(pkt); |
| } |
| |
| static int fwserial_parse_mgmt_write(struct fwtty_peer *peer, |
| struct fwserial_mgmt_pkt *pkt, |
| unsigned long long addr, |
| size_t len) |
| { |
| struct fwtty_port *port = NULL; |
| bool reset = false; |
| int rcode; |
| |
| if (addr != fwserial_mgmt_addr_handler.offset || len < sizeof(pkt->hdr)) |
| return RCODE_ADDRESS_ERROR; |
| |
| if (len != be16_to_cpu(pkt->hdr.len) || |
| len != mgmt_pkt_expected_len(pkt->hdr.code)) |
| return RCODE_DATA_ERROR; |
| |
| spin_lock_bh(&peer->lock); |
| if (peer->state == FWPS_GONE) { |
| /* |
| * This should never happen - it would mean that the |
| * remote unit that just wrote this transaction was |
| * already removed from the bus -- and the removal was |
| * processed before we rec'd this transaction |
| */ |
| fwtty_err(&peer->unit, "peer already removed\n"); |
| spin_unlock_bh(&peer->lock); |
| return RCODE_ADDRESS_ERROR; |
| } |
| |
| rcode = RCODE_COMPLETE; |
| |
| fwtty_dbg(&peer->unit, "mgmt: hdr.code: %04hx\n", pkt->hdr.code); |
| |
| switch (be16_to_cpu(pkt->hdr.code) & FWSC_CODE_MASK) { |
| case FWSC_VIRT_CABLE_PLUG: |
| if (work_pending(&peer->work)) { |
| fwtty_err(&peer->unit, "plug req: busy\n"); |
| rcode = RCODE_CONFLICT_ERROR; |
| |
| } else { |
| peer->work_params.plug_req = pkt->plug_req; |
| peer->workfn = fwserial_handle_plug_req; |
| queue_work(system_unbound_wq, &peer->work); |
| } |
| break; |
| |
| case FWSC_VIRT_CABLE_PLUG_RSP: |
| if (peer->state != FWPS_PLUG_PENDING) { |
| rcode = RCODE_CONFLICT_ERROR; |
| |
| } else if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) { |
| fwtty_notice(&peer->unit, "NACK plug rsp\n"); |
| port = peer_revert_state(peer); |
| |
| } else { |
| struct fwtty_port *tmp = peer->port; |
| |
| fwserial_virt_plug_complete(peer, &pkt->plug_rsp); |
| spin_unlock_bh(&peer->lock); |
| |
| fwtty_write_port_status(tmp); |
| spin_lock_bh(&peer->lock); |
| } |
| break; |
| |
| case FWSC_VIRT_CABLE_UNPLUG: |
| if (work_pending(&peer->work)) { |
| fwtty_err(&peer->unit, "unplug req: busy\n"); |
| rcode = RCODE_CONFLICT_ERROR; |
| } else { |
| peer->workfn = fwserial_handle_unplug_req; |
| queue_work(system_unbound_wq, &peer->work); |
| } |
| break; |
| |
| case FWSC_VIRT_CABLE_UNPLUG_RSP: |
| if (peer->state != FWPS_UNPLUG_PENDING) { |
| rcode = RCODE_CONFLICT_ERROR; |
| } else { |
| if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) |
| fwtty_notice(&peer->unit, "NACK unplug?\n"); |
| port = peer_revert_state(peer); |
| reset = true; |
| } |
| break; |
| |
| default: |
| fwtty_err(&peer->unit, "unknown mgmt code %d\n", |
| be16_to_cpu(pkt->hdr.code)); |
| rcode = RCODE_DATA_ERROR; |
| } |
| spin_unlock_bh(&peer->lock); |
| |
| if (port) |
| fwserial_release_port(port, reset); |
| |
| return rcode; |
| } |
| |
| /** |
| * fwserial_mgmt_handler: bus address handler for mgmt requests |
| * @parameters: fw_address_callback_t as specified by firewire core interface |
| * |
| * This handler is responsible for handling virtual cable requests from remotes |
| * for all cards. |
| */ |
| static void fwserial_mgmt_handler(struct fw_card *card, |
| struct fw_request *request, |
| int tcode, int destination, int source, |
| int generation, |
| unsigned long long addr, |
| void *data, size_t len, |
| void *callback_data) |
| { |
| struct fwserial_mgmt_pkt *pkt = data; |
| struct fwtty_peer *peer; |
| int rcode; |
| |
| rcu_read_lock(); |
| peer = __fwserial_peer_by_node_id(card, generation, source); |
| if (!peer) { |
| fwtty_dbg(card, "peer(%d:%x) not found\n", generation, source); |
| __dump_peer_list(card); |
| rcode = RCODE_CONFLICT_ERROR; |
| |
| } else { |
| switch (tcode) { |
| case TCODE_WRITE_BLOCK_REQUEST: |
| rcode = fwserial_parse_mgmt_write(peer, pkt, addr, len); |
| break; |
| |
| default: |
| rcode = RCODE_TYPE_ERROR; |
| } |
| } |
| |
| rcu_read_unlock(); |
| fw_send_response(card, request, rcode); |
| } |
| |
| static int __init fwserial_init(void) |
| { |
| int err, num_loops = !!(create_loop_dev); |
| |
| /* XXX: placeholder for a "firewire" debugfs node */ |
| fwserial_debugfs = debugfs_create_dir(KBUILD_MODNAME, NULL); |
| |
| /* num_ttys/num_ports must not be set above the static alloc avail */ |
| if (num_ttys + num_loops > MAX_CARD_PORTS) |
| num_ttys = MAX_CARD_PORTS - num_loops; |
| |
| num_ports = num_ttys + num_loops; |
| |
| fwtty_driver = tty_alloc_driver(MAX_TOTAL_PORTS, TTY_DRIVER_REAL_RAW |
| | TTY_DRIVER_DYNAMIC_DEV); |
| if (IS_ERR(fwtty_driver)) { |
| err = PTR_ERR(fwtty_driver); |
| goto remove_debugfs; |
| } |
| |
| fwtty_driver->driver_name = KBUILD_MODNAME; |
| fwtty_driver->name = tty_dev_name; |
| fwtty_driver->major = 0; |
| fwtty_driver->minor_start = 0; |
| fwtty_driver->type = TTY_DRIVER_TYPE_SERIAL; |
| fwtty_driver->subtype = SERIAL_TYPE_NORMAL; |
| fwtty_driver->init_termios = tty_std_termios; |
| fwtty_driver->init_termios.c_cflag |= CLOCAL; |
| tty_set_operations(fwtty_driver, &fwtty_ops); |
| |
| err = tty_register_driver(fwtty_driver); |
| if (err) { |
| pr_err("register tty driver failed (%d)\n", err); |
| goto put_tty; |
| } |
| |
| if (create_loop_dev) { |
| fwloop_driver = tty_alloc_driver(MAX_TOTAL_PORTS / num_ports, |
| TTY_DRIVER_REAL_RAW |
| | TTY_DRIVER_DYNAMIC_DEV); |
| if (IS_ERR(fwloop_driver)) { |
| err = PTR_ERR(fwloop_driver); |
| goto unregister_driver; |
| } |
| |
| fwloop_driver->driver_name = KBUILD_MODNAME "_loop"; |
| fwloop_driver->name = loop_dev_name; |
| fwloop_driver->major = 0; |
| fwloop_driver->minor_start = 0; |
| fwloop_driver->type = TTY_DRIVER_TYPE_SERIAL; |
| fwloop_driver->subtype = SERIAL_TYPE_NORMAL; |
| fwloop_driver->init_termios = tty_std_termios; |
| fwloop_driver->init_termios.c_cflag |= CLOCAL; |
| tty_set_operations(fwloop_driver, &fwloop_ops); |
| |
| err = tty_register_driver(fwloop_driver); |
| if (err) { |
| pr_err("register loop driver failed (%d)\n", err); |
| goto put_loop; |
| } |
| } |
| |
| fwtty_txn_cache = kmem_cache_create("fwtty_txn_cache", |
| sizeof(struct fwtty_transaction), |
| 0, 0, fwtty_txn_constructor); |
| if (!fwtty_txn_cache) { |
| err = -ENOMEM; |
| goto unregister_loop; |
| } |
| |
| /* |
| * Ideally, this address handler would be registered per local node |
| * (rather than the same handler for all local nodes). However, |
| * since the firewire core requires the config rom descriptor *before* |
| * the local unit device(s) are created, a single management handler |
| * must suffice for all local serial units. |
| */ |
| fwserial_mgmt_addr_handler.length = sizeof(struct fwserial_mgmt_pkt); |
| fwserial_mgmt_addr_handler.address_callback = fwserial_mgmt_handler; |
| |
| err = fw_core_add_address_handler(&fwserial_mgmt_addr_handler, |
| &fwserial_mgmt_addr_region); |
| if (err) { |
| pr_err("add management handler failed (%d)\n", err); |
| goto destroy_cache; |
| } |
| |
| fwserial_unit_directory_data.unit_addr_offset = |
| FW_UNIT_ADDRESS(fwserial_mgmt_addr_handler.offset); |
| err = fw_core_add_descriptor(&fwserial_unit_directory); |
| if (err) { |
| pr_err("add unit descriptor failed (%d)\n", err); |
| goto remove_handler; |
| } |
| |
| err = driver_register(&fwserial_driver.driver); |
| if (err) { |
| pr_err("register fwserial driver failed (%d)\n", err); |
| goto remove_descriptor; |
| } |
| |
| return 0; |
| |
| remove_descriptor: |
| fw_core_remove_descriptor(&fwserial_unit_directory); |
| remove_handler: |
| fw_core_remove_address_handler(&fwserial_mgmt_addr_handler); |
| destroy_cache: |
| kmem_cache_destroy(fwtty_txn_cache); |
| unregister_loop: |
| if (create_loop_dev) |
| tty_unregister_driver(fwloop_driver); |
| put_loop: |
| if (create_loop_dev) |
| put_tty_driver(fwloop_driver); |
| unregister_driver: |
| tty_unregister_driver(fwtty_driver); |
| put_tty: |
| put_tty_driver(fwtty_driver); |
| remove_debugfs: |
| debugfs_remove_recursive(fwserial_debugfs); |
| |
| return err; |
| } |
| |
| static void __exit fwserial_exit(void) |
| { |
| driver_unregister(&fwserial_driver.driver); |
| fw_core_remove_descriptor(&fwserial_unit_directory); |
| fw_core_remove_address_handler(&fwserial_mgmt_addr_handler); |
| kmem_cache_destroy(fwtty_txn_cache); |
| if (create_loop_dev) { |
| tty_unregister_driver(fwloop_driver); |
| put_tty_driver(fwloop_driver); |
| } |
| tty_unregister_driver(fwtty_driver); |
| put_tty_driver(fwtty_driver); |
| debugfs_remove_recursive(fwserial_debugfs); |
| } |
| |
| module_init(fwserial_init); |
| module_exit(fwserial_exit); |
| |
| MODULE_AUTHOR("Peter Hurley (peter@hurleysoftware.com)"); |
| MODULE_DESCRIPTION("FireWire Serial TTY Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(ieee1394, fwserial_id_table); |
| MODULE_PARM_DESC(ttys, "Number of ttys to create for each local firewire node"); |
| MODULE_PARM_DESC(auto, "Auto-connect a tty to each firewire node discovered"); |
| MODULE_PARM_DESC(loop, "Create a loopback device, fwloop<n>, with ttys"); |