| /* SPDX-License-Identifier: GPL-2.0 */ |
| #define _GNU_SOURCE |
| #include <assert.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <linux/types.h> |
| #include <sched.h> |
| #include <signal.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <syscall.h> |
| #include <sys/mount.h> |
| #include <sys/wait.h> |
| #include <unistd.h> |
| |
| #include "kselftest_harness.h" |
| #include "../pidfd/pidfd.h" |
| |
| /* |
| * The kernel computes the minimum allowed pid_max as: |
| * max(RESERVED_PIDS + 1, PIDS_PER_CPU_MIN * num_possible_cpus()) |
| * Mirror that here so the test values are always valid. |
| * |
| * Note: glibc's get_nprocs_conf() returns the number of *configured* |
| * (present) CPUs, not *possible* CPUs. The kernel uses |
| * num_possible_cpus() which corresponds to /sys/devices/system/cpu/possible. |
| * These can differ significantly (e.g. 16 configured vs 128 possible). |
| */ |
| #define RESERVED_PIDS 300 |
| #define PIDS_PER_CPU_MIN 8 |
| |
| /* Count CPUs from a range list like "0-31" or "0-15,32-47". */ |
| static int num_possible_cpus(void) |
| { |
| FILE *f; |
| int count = 0; |
| int lo, hi; |
| |
| f = fopen("/sys/devices/system/cpu/possible", "r"); |
| if (!f) |
| return 0; |
| |
| while (fscanf(f, "%d", &lo) == 1) { |
| if (fscanf(f, "-%d", &hi) == 1) |
| count += hi - lo + 1; |
| else |
| count++; |
| /* skip comma separator */ |
| fscanf(f, ","); |
| } |
| |
| fclose(f); |
| return count; |
| } |
| |
| static int pid_min(void) |
| { |
| int cpu_min = PIDS_PER_CPU_MIN * num_possible_cpus(); |
| |
| return cpu_min > (RESERVED_PIDS + 1) ? cpu_min : (RESERVED_PIDS + 1); |
| } |
| |
| /* |
| * Outer and inner pid_max limits used by the tests. The outer limit is |
| * the more restrictive ancestor; the inner limit is set higher in a |
| * nested namespace but must still be capped by the outer limit. |
| * Both are derived from the kernel's minimum so they are always writable. |
| * |
| * Global so that clone callbacks can access them without parameter plumbing. |
| */ |
| static int outer_limit; |
| static int inner_limit; |
| |
| static int write_int_to_fd(int fd, int val) |
| { |
| char buf[12]; |
| int len = snprintf(buf, sizeof(buf), "%d", val); |
| |
| return write(fd, buf, len); |
| } |
| |
| #define __STACK_SIZE (8 * 1024 * 1024) |
| static pid_t do_clone(int (*fn)(void *), void *arg, int flags) |
| { |
| char *stack; |
| pid_t ret; |
| |
| stack = malloc(__STACK_SIZE); |
| if (!stack) |
| return -ENOMEM; |
| |
| #ifdef __ia64__ |
| ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg); |
| #else |
| ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg); |
| #endif |
| free(stack); |
| return ret; |
| } |
| |
| static int pid_max_cb(void *data) |
| { |
| int fd, ret; |
| pid_t pid; |
| |
| ret = mount("", "/", NULL, MS_PRIVATE | MS_REC, 0); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to make rootfs private mount\n"); |
| return -1; |
| } |
| |
| umount2("/proc", MNT_DETACH); |
| |
| ret = mount("proc", "/proc", "proc", 0, NULL); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to mount proc\n"); |
| return -1; |
| } |
| |
| fd = open("/proc/sys/kernel/pid_max", O_RDWR | O_CLOEXEC | O_NOCTTY); |
| if (fd < 0) { |
| fprintf(stderr, "%m - Failed to open pid_max\n"); |
| return -1; |
| } |
| |
| ret = write_int_to_fd(fd, inner_limit); |
| if (ret < 0) { |
| fprintf(stderr, "%m - Failed to write pid_max\n"); |
| return -1; |
| } |
| |
| for (int i = 0; i < inner_limit + 1; i++) { |
| pid = fork(); |
| if (pid == 0) |
| exit(EXIT_SUCCESS); |
| wait_for_pid(pid); |
| if (pid > inner_limit) { |
| fprintf(stderr, "Managed to create pid number beyond limit\n"); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pid_max_nested_inner(void *data) |
| { |
| int fret = -1; |
| pid_t pids[2]; |
| int fd, i, ret; |
| |
| ret = mount("", "/", NULL, MS_PRIVATE | MS_REC, 0); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to make rootfs private mount\n"); |
| return fret; |
| } |
| |
| umount2("/proc", MNT_DETACH); |
| |
| ret = mount("proc", "/proc", "proc", 0, NULL); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to mount proc\n"); |
| return fret; |
| } |
| |
| fd = open("/proc/sys/kernel/pid_max", O_RDWR | O_CLOEXEC | O_NOCTTY); |
| if (fd < 0) { |
| fprintf(stderr, "%m - Failed to open pid_max\n"); |
| return fret; |
| } |
| |
| ret = write_int_to_fd(fd, inner_limit); |
| close(fd); |
| if (ret < 0) { |
| fprintf(stderr, "%m - Failed to write pid_max\n"); |
| return fret; |
| } |
| |
| pids[0] = fork(); |
| if (pids[0] < 0) { |
| fprintf(stderr, "Failed to create first new process\n"); |
| return fret; |
| } |
| |
| if (pids[0] == 0) |
| exit(EXIT_SUCCESS); |
| |
| pids[1] = fork(); |
| wait_for_pid(pids[0]); |
| if (pids[1] >= 0) { |
| if (pids[1] == 0) |
| exit(EXIT_SUCCESS); |
| wait_for_pid(pids[1]); |
| |
| fprintf(stderr, "Managed to create process even though ancestor pid namespace had a limit\n"); |
| return fret; |
| } |
| |
| /* Now make sure that we wrap pids at outer_limit. */ |
| for (i = 0; i < inner_limit + 10; i++) { |
| pid_t pid; |
| |
| pid = fork(); |
| if (pid < 0) |
| return fret; |
| |
| if (pid == 0) |
| exit(EXIT_SUCCESS); |
| |
| wait_for_pid(pid); |
| if (pid >= inner_limit) { |
| fprintf(stderr, "Managed to create process with pid %d beyond configured limit\n", pid); |
| return fret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pid_max_nested_outer(void *data) |
| { |
| int fret = -1, nr_procs = 0; |
| pid_t *pids; |
| int fd, ret; |
| pid_t pid; |
| |
| pids = malloc(outer_limit * sizeof(pid_t)); |
| if (!pids) |
| return -1; |
| |
| ret = mount("", "/", NULL, MS_PRIVATE | MS_REC, 0); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to make rootfs private mount\n"); |
| goto out; |
| } |
| |
| umount2("/proc", MNT_DETACH); |
| |
| ret = mount("proc", "/proc", "proc", 0, NULL); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to mount proc\n"); |
| goto out; |
| } |
| |
| fd = open("/proc/sys/kernel/pid_max", O_RDWR | O_CLOEXEC | O_NOCTTY); |
| if (fd < 0) { |
| fprintf(stderr, "%m - Failed to open pid_max\n"); |
| goto out; |
| } |
| |
| ret = write_int_to_fd(fd, outer_limit); |
| close(fd); |
| if (ret < 0) { |
| fprintf(stderr, "%m - Failed to write pid_max\n"); |
| goto out; |
| } |
| |
| /* |
| * Create (outer_limit - 4) processes. This leaves room for |
| * do_clone() and one more. So creating another process needs |
| * to fail. |
| */ |
| for (nr_procs = 0; nr_procs < outer_limit - 4; nr_procs++) { |
| pid = fork(); |
| if (pid < 0) |
| goto reap; |
| |
| if (pid == 0) |
| exit(EXIT_SUCCESS); |
| |
| pids[nr_procs] = pid; |
| } |
| |
| pid = do_clone(pid_max_nested_inner, NULL, CLONE_NEWPID | CLONE_NEWNS); |
| if (pid < 0) { |
| fprintf(stderr, "%m - Failed to clone nested pidns\n"); |
| goto reap; |
| } |
| |
| if (wait_for_pid(pid)) { |
| fprintf(stderr, "%m - Nested pid_max failed\n"); |
| goto reap; |
| } |
| |
| fret = 0; |
| |
| reap: |
| for (int i = 0; i < nr_procs; i++) |
| wait_for_pid(pids[i]); |
| |
| out: |
| free(pids); |
| return fret; |
| } |
| |
| static int pid_max_nested_limit_inner(void *data) |
| { |
| int fret = -1, nr_procs = 0; |
| int fd, ret; |
| pid_t pid; |
| pid_t *pids; |
| |
| pids = malloc(inner_limit * sizeof(pid_t)); |
| if (!pids) |
| return -1; |
| |
| ret = mount("", "/", NULL, MS_PRIVATE | MS_REC, 0); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to make rootfs private mount\n"); |
| goto out; |
| } |
| |
| umount2("/proc", MNT_DETACH); |
| |
| ret = mount("proc", "/proc", "proc", 0, NULL); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to mount proc\n"); |
| goto out; |
| } |
| |
| fd = open("/proc/sys/kernel/pid_max", O_RDWR | O_CLOEXEC | O_NOCTTY); |
| if (fd < 0) { |
| fprintf(stderr, "%m - Failed to open pid_max\n"); |
| goto out; |
| } |
| |
| ret = write_int_to_fd(fd, inner_limit); |
| close(fd); |
| if (ret < 0) { |
| fprintf(stderr, "%m - Failed to write pid_max\n"); |
| goto out; |
| } |
| |
| for (nr_procs = 0; nr_procs < inner_limit; nr_procs++) { |
| pid = fork(); |
| if (pid < 0) |
| break; |
| |
| if (pid == 0) |
| exit(EXIT_SUCCESS); |
| |
| pids[nr_procs] = pid; |
| } |
| |
| if (nr_procs >= outer_limit) { |
| fprintf(stderr, "Managed to create processes beyond the configured outer limit\n"); |
| goto reap; |
| } |
| |
| fret = 0; |
| |
| reap: |
| for (int i = 0; i < nr_procs; i++) |
| wait_for_pid(pids[i]); |
| |
| out: |
| free(pids); |
| return fret; |
| } |
| |
| static int pid_max_nested_limit_outer(void *data) |
| { |
| int fd, ret; |
| pid_t pid; |
| |
| ret = mount("", "/", NULL, MS_PRIVATE | MS_REC, 0); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to make rootfs private mount\n"); |
| return -1; |
| } |
| |
| umount2("/proc", MNT_DETACH); |
| |
| ret = mount("proc", "/proc", "proc", 0, NULL); |
| if (ret) { |
| fprintf(stderr, "%m - Failed to mount proc\n"); |
| return -1; |
| } |
| |
| fd = open("/proc/sys/kernel/pid_max", O_RDWR | O_CLOEXEC | O_NOCTTY); |
| if (fd < 0) { |
| fprintf(stderr, "%m - Failed to open pid_max\n"); |
| return -1; |
| } |
| |
| ret = write_int_to_fd(fd, outer_limit); |
| close(fd); |
| if (ret < 0) { |
| fprintf(stderr, "%m - Failed to write pid_max\n"); |
| return -1; |
| } |
| |
| pid = do_clone(pid_max_nested_limit_inner, NULL, CLONE_NEWPID | CLONE_NEWNS); |
| if (pid < 0) { |
| fprintf(stderr, "%m - Failed to clone nested pidns\n"); |
| return -1; |
| } |
| |
| if (wait_for_pid(pid)) { |
| fprintf(stderr, "%m - Nested pid_max failed\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| FIXTURE(pid_max) { |
| int dummy; |
| }; |
| |
| FIXTURE_SETUP(pid_max) |
| { |
| int min = pid_min(); |
| |
| outer_limit = min + 100; |
| inner_limit = min + 200; |
| } |
| |
| FIXTURE_TEARDOWN(pid_max) |
| { |
| } |
| |
| TEST_F(pid_max, simple) |
| { |
| pid_t pid; |
| |
| pid = do_clone(pid_max_cb, NULL, CLONE_NEWPID | CLONE_NEWNS); |
| ASSERT_GT(pid, 0); |
| ASSERT_EQ(0, wait_for_pid(pid)); |
| } |
| |
| TEST_F(pid_max, nested_limit) |
| { |
| pid_t pid; |
| |
| pid = do_clone(pid_max_nested_limit_outer, NULL, CLONE_NEWPID | CLONE_NEWNS); |
| ASSERT_GT(pid, 0); |
| ASSERT_EQ(0, wait_for_pid(pid)); |
| } |
| |
| TEST_F(pid_max, nested) |
| { |
| pid_t pid; |
| |
| pid = do_clone(pid_max_nested_outer, NULL, CLONE_NEWPID | CLONE_NEWNS); |
| ASSERT_GT(pid, 0); |
| ASSERT_EQ(0, wait_for_pid(pid)); |
| } |
| |
| TEST_HARNESS_MAIN |