| // SPDX-License-Identifier: GPL-2.0 |
| |
| #define pr_fmt(fmt) "DMAR-IR: " fmt |
| |
| #include <linux/interrupt.h> |
| #include <linux/dmar.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hpet.h> |
| #include <linux/pci.h> |
| #include <linux/irq.h> |
| #include <linux/intel-iommu.h> |
| #include <linux/acpi.h> |
| #include <linux/irqdomain.h> |
| #include <linux/crash_dump.h> |
| #include <asm/io_apic.h> |
| #include <asm/smp.h> |
| #include <asm/cpu.h> |
| #include <asm/irq_remapping.h> |
| #include <asm/pci-direct.h> |
| #include <asm/msidef.h> |
| |
| #include "irq_remapping.h" |
| |
| enum irq_mode { |
| IRQ_REMAPPING, |
| IRQ_POSTING, |
| }; |
| |
| struct ioapic_scope { |
| struct intel_iommu *iommu; |
| unsigned int id; |
| unsigned int bus; /* PCI bus number */ |
| unsigned int devfn; /* PCI devfn number */ |
| }; |
| |
| struct hpet_scope { |
| struct intel_iommu *iommu; |
| u8 id; |
| unsigned int bus; |
| unsigned int devfn; |
| }; |
| |
| struct irq_2_iommu { |
| struct intel_iommu *iommu; |
| u16 irte_index; |
| u16 sub_handle; |
| u8 irte_mask; |
| enum irq_mode mode; |
| }; |
| |
| struct intel_ir_data { |
| struct irq_2_iommu irq_2_iommu; |
| struct irte irte_entry; |
| union { |
| struct msi_msg msi_entry; |
| }; |
| }; |
| |
| #define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0) |
| #define IRTE_DEST(dest) ((eim_mode) ? dest : dest << 8) |
| |
| static int __read_mostly eim_mode; |
| static struct ioapic_scope ir_ioapic[MAX_IO_APICS]; |
| static struct hpet_scope ir_hpet[MAX_HPET_TBS]; |
| |
| /* |
| * Lock ordering: |
| * ->dmar_global_lock |
| * ->irq_2_ir_lock |
| * ->qi->q_lock |
| * ->iommu->register_lock |
| * Note: |
| * intel_irq_remap_ops.{supported,prepare,enable,disable,reenable} are called |
| * in single-threaded environment with interrupt disabled, so no need to tabke |
| * the dmar_global_lock. |
| */ |
| DEFINE_RAW_SPINLOCK(irq_2_ir_lock); |
| static const struct irq_domain_ops intel_ir_domain_ops; |
| |
| static void iommu_disable_irq_remapping(struct intel_iommu *iommu); |
| static int __init parse_ioapics_under_ir(void); |
| |
| static bool ir_pre_enabled(struct intel_iommu *iommu) |
| { |
| return (iommu->flags & VTD_FLAG_IRQ_REMAP_PRE_ENABLED); |
| } |
| |
| static void clear_ir_pre_enabled(struct intel_iommu *iommu) |
| { |
| iommu->flags &= ~VTD_FLAG_IRQ_REMAP_PRE_ENABLED; |
| } |
| |
| static void init_ir_status(struct intel_iommu *iommu) |
| { |
| u32 gsts; |
| |
| gsts = readl(iommu->reg + DMAR_GSTS_REG); |
| if (gsts & DMA_GSTS_IRES) |
| iommu->flags |= VTD_FLAG_IRQ_REMAP_PRE_ENABLED; |
| } |
| |
| static int alloc_irte(struct intel_iommu *iommu, |
| struct irq_2_iommu *irq_iommu, u16 count) |
| { |
| struct ir_table *table = iommu->ir_table; |
| unsigned int mask = 0; |
| unsigned long flags; |
| int index; |
| |
| if (!count || !irq_iommu) |
| return -1; |
| |
| if (count > 1) { |
| count = __roundup_pow_of_two(count); |
| mask = ilog2(count); |
| } |
| |
| if (mask > ecap_max_handle_mask(iommu->ecap)) { |
| pr_err("Requested mask %x exceeds the max invalidation handle" |
| " mask value %Lx\n", mask, |
| ecap_max_handle_mask(iommu->ecap)); |
| return -1; |
| } |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| index = bitmap_find_free_region(table->bitmap, |
| INTR_REMAP_TABLE_ENTRIES, mask); |
| if (index < 0) { |
| pr_warn("IR%d: can't allocate an IRTE\n", iommu->seq_id); |
| } else { |
| irq_iommu->iommu = iommu; |
| irq_iommu->irte_index = index; |
| irq_iommu->sub_handle = 0; |
| irq_iommu->irte_mask = mask; |
| irq_iommu->mode = IRQ_REMAPPING; |
| } |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| |
| return index; |
| } |
| |
| static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask) |
| { |
| struct qi_desc desc; |
| |
| desc.qw0 = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask) |
| | QI_IEC_SELECTIVE; |
| desc.qw1 = 0; |
| desc.qw2 = 0; |
| desc.qw3 = 0; |
| |
| return qi_submit_sync(&desc, iommu); |
| } |
| |
| static int modify_irte(struct irq_2_iommu *irq_iommu, |
| struct irte *irte_modified) |
| { |
| struct intel_iommu *iommu; |
| unsigned long flags; |
| struct irte *irte; |
| int rc, index; |
| |
| if (!irq_iommu) |
| return -1; |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| |
| iommu = irq_iommu->iommu; |
| |
| index = irq_iommu->irte_index + irq_iommu->sub_handle; |
| irte = &iommu->ir_table->base[index]; |
| |
| #if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) |
| if ((irte->pst == 1) || (irte_modified->pst == 1)) { |
| bool ret; |
| |
| ret = cmpxchg_double(&irte->low, &irte->high, |
| irte->low, irte->high, |
| irte_modified->low, irte_modified->high); |
| /* |
| * We use cmpxchg16 to atomically update the 128-bit IRTE, |
| * and it cannot be updated by the hardware or other processors |
| * behind us, so the return value of cmpxchg16 should be the |
| * same as the old value. |
| */ |
| WARN_ON(!ret); |
| } else |
| #endif |
| { |
| set_64bit(&irte->low, irte_modified->low); |
| set_64bit(&irte->high, irte_modified->high); |
| } |
| __iommu_flush_cache(iommu, irte, sizeof(*irte)); |
| |
| rc = qi_flush_iec(iommu, index, 0); |
| |
| /* Update iommu mode according to the IRTE mode */ |
| irq_iommu->mode = irte->pst ? IRQ_POSTING : IRQ_REMAPPING; |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| |
| return rc; |
| } |
| |
| static struct intel_iommu *map_hpet_to_ir(u8 hpet_id) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_HPET_TBS; i++) |
| if (ir_hpet[i].id == hpet_id && ir_hpet[i].iommu) |
| return ir_hpet[i].iommu; |
| return NULL; |
| } |
| |
| static struct intel_iommu *map_ioapic_to_ir(int apic) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_IO_APICS; i++) |
| if (ir_ioapic[i].id == apic && ir_ioapic[i].iommu) |
| return ir_ioapic[i].iommu; |
| return NULL; |
| } |
| |
| static struct intel_iommu *map_dev_to_ir(struct pci_dev *dev) |
| { |
| struct dmar_drhd_unit *drhd; |
| |
| drhd = dmar_find_matched_drhd_unit(dev); |
| if (!drhd) |
| return NULL; |
| |
| return drhd->iommu; |
| } |
| |
| static int clear_entries(struct irq_2_iommu *irq_iommu) |
| { |
| struct irte *start, *entry, *end; |
| struct intel_iommu *iommu; |
| int index; |
| |
| if (irq_iommu->sub_handle) |
| return 0; |
| |
| iommu = irq_iommu->iommu; |
| index = irq_iommu->irte_index; |
| |
| start = iommu->ir_table->base + index; |
| end = start + (1 << irq_iommu->irte_mask); |
| |
| for (entry = start; entry < end; entry++) { |
| set_64bit(&entry->low, 0); |
| set_64bit(&entry->high, 0); |
| } |
| bitmap_release_region(iommu->ir_table->bitmap, index, |
| irq_iommu->irte_mask); |
| |
| return qi_flush_iec(iommu, index, irq_iommu->irte_mask); |
| } |
| |
| /* |
| * source validation type |
| */ |
| #define SVT_NO_VERIFY 0x0 /* no verification is required */ |
| #define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fields */ |
| #define SVT_VERIFY_BUS 0x2 /* verify bus of request-id */ |
| |
| /* |
| * source-id qualifier |
| */ |
| #define SQ_ALL_16 0x0 /* verify all 16 bits of request-id */ |
| #define SQ_13_IGNORE_1 0x1 /* verify most significant 13 bits, ignore |
| * the third least significant bit |
| */ |
| #define SQ_13_IGNORE_2 0x2 /* verify most significant 13 bits, ignore |
| * the second and third least significant bits |
| */ |
| #define SQ_13_IGNORE_3 0x3 /* verify most significant 13 bits, ignore |
| * the least three significant bits |
| */ |
| |
| /* |
| * set SVT, SQ and SID fields of irte to verify |
| * source ids of interrupt requests |
| */ |
| static void set_irte_sid(struct irte *irte, unsigned int svt, |
| unsigned int sq, unsigned int sid) |
| { |
| if (disable_sourceid_checking) |
| svt = SVT_NO_VERIFY; |
| irte->svt = svt; |
| irte->sq = sq; |
| irte->sid = sid; |
| } |
| |
| /* |
| * Set an IRTE to match only the bus number. Interrupt requests that reference |
| * this IRTE must have a requester-id whose bus number is between or equal |
| * to the start_bus and end_bus arguments. |
| */ |
| static void set_irte_verify_bus(struct irte *irte, unsigned int start_bus, |
| unsigned int end_bus) |
| { |
| set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, |
| (start_bus << 8) | end_bus); |
| } |
| |
| static int set_ioapic_sid(struct irte *irte, int apic) |
| { |
| int i; |
| u16 sid = 0; |
| |
| if (!irte) |
| return -1; |
| |
| down_read(&dmar_global_lock); |
| for (i = 0; i < MAX_IO_APICS; i++) { |
| if (ir_ioapic[i].iommu && ir_ioapic[i].id == apic) { |
| sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn; |
| break; |
| } |
| } |
| up_read(&dmar_global_lock); |
| |
| if (sid == 0) { |
| pr_warn("Failed to set source-id of IOAPIC (%d)\n", apic); |
| return -1; |
| } |
| |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, sid); |
| |
| return 0; |
| } |
| |
| static int set_hpet_sid(struct irte *irte, u8 id) |
| { |
| int i; |
| u16 sid = 0; |
| |
| if (!irte) |
| return -1; |
| |
| down_read(&dmar_global_lock); |
| for (i = 0; i < MAX_HPET_TBS; i++) { |
| if (ir_hpet[i].iommu && ir_hpet[i].id == id) { |
| sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn; |
| break; |
| } |
| } |
| up_read(&dmar_global_lock); |
| |
| if (sid == 0) { |
| pr_warn("Failed to set source-id of HPET block (%d)\n", id); |
| return -1; |
| } |
| |
| /* |
| * Should really use SQ_ALL_16. Some platforms are broken. |
| * While we figure out the right quirks for these broken platforms, use |
| * SQ_13_IGNORE_3 for now. |
| */ |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_13_IGNORE_3, sid); |
| |
| return 0; |
| } |
| |
| struct set_msi_sid_data { |
| struct pci_dev *pdev; |
| u16 alias; |
| int count; |
| int busmatch_count; |
| }; |
| |
| static int set_msi_sid_cb(struct pci_dev *pdev, u16 alias, void *opaque) |
| { |
| struct set_msi_sid_data *data = opaque; |
| |
| if (data->count == 0 || PCI_BUS_NUM(alias) == PCI_BUS_NUM(data->alias)) |
| data->busmatch_count++; |
| |
| data->pdev = pdev; |
| data->alias = alias; |
| data->count++; |
| |
| return 0; |
| } |
| |
| static int set_msi_sid(struct irte *irte, struct pci_dev *dev) |
| { |
| struct set_msi_sid_data data; |
| |
| if (!irte || !dev) |
| return -1; |
| |
| data.count = 0; |
| data.busmatch_count = 0; |
| pci_for_each_dma_alias(dev, set_msi_sid_cb, &data); |
| |
| /* |
| * DMA alias provides us with a PCI device and alias. The only case |
| * where the it will return an alias on a different bus than the |
| * device is the case of a PCIe-to-PCI bridge, where the alias is for |
| * the subordinate bus. In this case we can only verify the bus. |
| * |
| * If there are multiple aliases, all with the same bus number, |
| * then all we can do is verify the bus. This is typical in NTB |
| * hardware which use proxy IDs where the device will generate traffic |
| * from multiple devfn numbers on the same bus. |
| * |
| * If the alias device is on a different bus than our source device |
| * then we have a topology based alias, use it. |
| * |
| * Otherwise, the alias is for a device DMA quirk and we cannot |
| * assume that MSI uses the same requester ID. Therefore use the |
| * original device. |
| */ |
| if (PCI_BUS_NUM(data.alias) != data.pdev->bus->number) |
| set_irte_verify_bus(irte, PCI_BUS_NUM(data.alias), |
| dev->bus->number); |
| else if (data.count >= 2 && data.busmatch_count == data.count) |
| set_irte_verify_bus(irte, dev->bus->number, dev->bus->number); |
| else if (data.pdev->bus->number != dev->bus->number) |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, data.alias); |
| else |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, |
| pci_dev_id(dev)); |
| |
| return 0; |
| } |
| |
| static int iommu_load_old_irte(struct intel_iommu *iommu) |
| { |
| struct irte *old_ir_table; |
| phys_addr_t irt_phys; |
| unsigned int i; |
| size_t size; |
| u64 irta; |
| |
| /* Check whether the old ir-table has the same size as ours */ |
| irta = dmar_readq(iommu->reg + DMAR_IRTA_REG); |
| if ((irta & INTR_REMAP_TABLE_REG_SIZE_MASK) |
| != INTR_REMAP_TABLE_REG_SIZE) |
| return -EINVAL; |
| |
| irt_phys = irta & VTD_PAGE_MASK; |
| size = INTR_REMAP_TABLE_ENTRIES*sizeof(struct irte); |
| |
| /* Map the old IR table */ |
| old_ir_table = memremap(irt_phys, size, MEMREMAP_WB); |
| if (!old_ir_table) |
| return -ENOMEM; |
| |
| /* Copy data over */ |
| memcpy(iommu->ir_table->base, old_ir_table, size); |
| |
| __iommu_flush_cache(iommu, iommu->ir_table->base, size); |
| |
| /* |
| * Now check the table for used entries and mark those as |
| * allocated in the bitmap |
| */ |
| for (i = 0; i < INTR_REMAP_TABLE_ENTRIES; i++) { |
| if (iommu->ir_table->base[i].present) |
| bitmap_set(iommu->ir_table->bitmap, i, 1); |
| } |
| |
| memunmap(old_ir_table); |
| |
| return 0; |
| } |
| |
| |
| static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode) |
| { |
| unsigned long flags; |
| u64 addr; |
| u32 sts; |
| |
| addr = virt_to_phys((void *)iommu->ir_table->base); |
| |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); |
| |
| dmar_writeq(iommu->reg + DMAR_IRTA_REG, |
| (addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE); |
| |
| /* Set interrupt-remapping table pointer */ |
| writel(iommu->gcmd | DMA_GCMD_SIRTP, iommu->reg + DMAR_GCMD_REG); |
| |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, |
| readl, (sts & DMA_GSTS_IRTPS), sts); |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); |
| |
| /* |
| * Global invalidation of interrupt entry cache to make sure the |
| * hardware uses the new irq remapping table. |
| */ |
| qi_global_iec(iommu); |
| } |
| |
| static void iommu_enable_irq_remapping(struct intel_iommu *iommu) |
| { |
| unsigned long flags; |
| u32 sts; |
| |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); |
| |
| /* Enable interrupt-remapping */ |
| iommu->gcmd |= DMA_GCMD_IRE; |
| iommu->gcmd &= ~DMA_GCMD_CFI; /* Block compatibility-format MSIs */ |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); |
| |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, |
| readl, (sts & DMA_GSTS_IRES), sts); |
| |
| /* |
| * With CFI clear in the Global Command register, we should be |
| * protected from dangerous (i.e. compatibility) interrupts |
| * regardless of x2apic status. Check just to be sure. |
| */ |
| if (sts & DMA_GSTS_CFIS) |
| WARN(1, KERN_WARNING |
| "Compatibility-format IRQs enabled despite intr remapping;\n" |
| "you are vulnerable to IRQ injection.\n"); |
| |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); |
| } |
| |
| static int intel_setup_irq_remapping(struct intel_iommu *iommu) |
| { |
| struct ir_table *ir_table; |
| struct fwnode_handle *fn; |
| unsigned long *bitmap; |
| struct page *pages; |
| |
| if (iommu->ir_table) |
| return 0; |
| |
| ir_table = kzalloc(sizeof(struct ir_table), GFP_KERNEL); |
| if (!ir_table) |
| return -ENOMEM; |
| |
| pages = alloc_pages_node(iommu->node, GFP_KERNEL | __GFP_ZERO, |
| INTR_REMAP_PAGE_ORDER); |
| if (!pages) { |
| pr_err("IR%d: failed to allocate pages of order %d\n", |
| iommu->seq_id, INTR_REMAP_PAGE_ORDER); |
| goto out_free_table; |
| } |
| |
| bitmap = bitmap_zalloc(INTR_REMAP_TABLE_ENTRIES, GFP_ATOMIC); |
| if (bitmap == NULL) { |
| pr_err("IR%d: failed to allocate bitmap\n", iommu->seq_id); |
| goto out_free_pages; |
| } |
| |
| fn = irq_domain_alloc_named_id_fwnode("INTEL-IR", iommu->seq_id); |
| if (!fn) |
| goto out_free_bitmap; |
| |
| iommu->ir_domain = |
| irq_domain_create_hierarchy(arch_get_ir_parent_domain(), |
| 0, INTR_REMAP_TABLE_ENTRIES, |
| fn, &intel_ir_domain_ops, |
| iommu); |
| irq_domain_free_fwnode(fn); |
| if (!iommu->ir_domain) { |
| pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id); |
| goto out_free_bitmap; |
| } |
| iommu->ir_msi_domain = |
| arch_create_remap_msi_irq_domain(iommu->ir_domain, |
| "INTEL-IR-MSI", |
| iommu->seq_id); |
| |
| ir_table->base = page_address(pages); |
| ir_table->bitmap = bitmap; |
| iommu->ir_table = ir_table; |
| |
| /* |
| * If the queued invalidation is already initialized, |
| * shouldn't disable it. |
| */ |
| if (!iommu->qi) { |
| /* |
| * Clear previous faults. |
| */ |
| dmar_fault(-1, iommu); |
| dmar_disable_qi(iommu); |
| |
| if (dmar_enable_qi(iommu)) { |
| pr_err("Failed to enable queued invalidation\n"); |
| goto out_free_bitmap; |
| } |
| } |
| |
| init_ir_status(iommu); |
| |
| if (ir_pre_enabled(iommu)) { |
| if (!is_kdump_kernel()) { |
| pr_warn("IRQ remapping was enabled on %s but we are not in kdump mode\n", |
| iommu->name); |
| clear_ir_pre_enabled(iommu); |
| iommu_disable_irq_remapping(iommu); |
| } else if (iommu_load_old_irte(iommu)) |
| pr_err("Failed to copy IR table for %s from previous kernel\n", |
| iommu->name); |
| else |
| pr_info("Copied IR table for %s from previous kernel\n", |
| iommu->name); |
| } |
| |
| iommu_set_irq_remapping(iommu, eim_mode); |
| |
| return 0; |
| |
| out_free_bitmap: |
| bitmap_free(bitmap); |
| out_free_pages: |
| __free_pages(pages, INTR_REMAP_PAGE_ORDER); |
| out_free_table: |
| kfree(ir_table); |
| |
| iommu->ir_table = NULL; |
| |
| return -ENOMEM; |
| } |
| |
| static void intel_teardown_irq_remapping(struct intel_iommu *iommu) |
| { |
| if (iommu && iommu->ir_table) { |
| if (iommu->ir_msi_domain) { |
| irq_domain_remove(iommu->ir_msi_domain); |
| iommu->ir_msi_domain = NULL; |
| } |
| if (iommu->ir_domain) { |
| irq_domain_remove(iommu->ir_domain); |
| iommu->ir_domain = NULL; |
| } |
| free_pages((unsigned long)iommu->ir_table->base, |
| INTR_REMAP_PAGE_ORDER); |
| bitmap_free(iommu->ir_table->bitmap); |
| kfree(iommu->ir_table); |
| iommu->ir_table = NULL; |
| } |
| } |
| |
| /* |
| * Disable Interrupt Remapping. |
| */ |
| static void iommu_disable_irq_remapping(struct intel_iommu *iommu) |
| { |
| unsigned long flags; |
| u32 sts; |
| |
| if (!ecap_ir_support(iommu->ecap)) |
| return; |
| |
| /* |
| * global invalidation of interrupt entry cache before disabling |
| * interrupt-remapping. |
| */ |
| qi_global_iec(iommu); |
| |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); |
| |
| sts = readl(iommu->reg + DMAR_GSTS_REG); |
| if (!(sts & DMA_GSTS_IRES)) |
| goto end; |
| |
| iommu->gcmd &= ~DMA_GCMD_IRE; |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); |
| |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, |
| readl, !(sts & DMA_GSTS_IRES), sts); |
| |
| end: |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); |
| } |
| |
| static int __init dmar_x2apic_optout(void) |
| { |
| struct acpi_table_dmar *dmar; |
| dmar = (struct acpi_table_dmar *)dmar_tbl; |
| if (!dmar || no_x2apic_optout) |
| return 0; |
| return dmar->flags & DMAR_X2APIC_OPT_OUT; |
| } |
| |
| static void __init intel_cleanup_irq_remapping(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu; |
| |
| for_each_iommu(iommu, drhd) { |
| if (ecap_ir_support(iommu->ecap)) { |
| iommu_disable_irq_remapping(iommu); |
| intel_teardown_irq_remapping(iommu); |
| } |
| } |
| |
| if (x2apic_supported()) |
| pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n"); |
| } |
| |
| static int __init intel_prepare_irq_remapping(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu; |
| int eim = 0; |
| |
| if (irq_remap_broken) { |
| pr_warn("This system BIOS has enabled interrupt remapping\n" |
| "on a chipset that contains an erratum making that\n" |
| "feature unstable. To maintain system stability\n" |
| "interrupt remapping is being disabled. Please\n" |
| "contact your BIOS vendor for an update\n"); |
| add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); |
| return -ENODEV; |
| } |
| |
| if (dmar_table_init() < 0) |
| return -ENODEV; |
| |
| if (!dmar_ir_support()) |
| return -ENODEV; |
| |
| if (parse_ioapics_under_ir()) { |
| pr_info("Not enabling interrupt remapping\n"); |
| goto error; |
| } |
| |
| /* First make sure all IOMMUs support IRQ remapping */ |
| for_each_iommu(iommu, drhd) |
| if (!ecap_ir_support(iommu->ecap)) |
| goto error; |
| |
| /* Detect remapping mode: lapic or x2apic */ |
| if (x2apic_supported()) { |
| eim = !dmar_x2apic_optout(); |
| if (!eim) { |
| pr_info("x2apic is disabled because BIOS sets x2apic opt out bit."); |
| pr_info("Use 'intremap=no_x2apic_optout' to override the BIOS setting.\n"); |
| } |
| } |
| |
| for_each_iommu(iommu, drhd) { |
| if (eim && !ecap_eim_support(iommu->ecap)) { |
| pr_info("%s does not support EIM\n", iommu->name); |
| eim = 0; |
| } |
| } |
| |
| eim_mode = eim; |
| if (eim) |
| pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n"); |
| |
| /* Do the initializations early */ |
| for_each_iommu(iommu, drhd) { |
| if (intel_setup_irq_remapping(iommu)) { |
| pr_err("Failed to setup irq remapping for %s\n", |
| iommu->name); |
| goto error; |
| } |
| } |
| |
| return 0; |
| |
| error: |
| intel_cleanup_irq_remapping(); |
| return -ENODEV; |
| } |
| |
| /* |
| * Set Posted-Interrupts capability. |
| */ |
| static inline void set_irq_posting_cap(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu; |
| |
| if (!disable_irq_post) { |
| /* |
| * If IRTE is in posted format, the 'pda' field goes across the |
| * 64-bit boundary, we need use cmpxchg16b to atomically update |
| * it. We only expose posted-interrupt when X86_FEATURE_CX16 |
| * is supported. Actually, hardware platforms supporting PI |
| * should have X86_FEATURE_CX16 support, this has been confirmed |
| * with Intel hardware guys. |
| */ |
| if (boot_cpu_has(X86_FEATURE_CX16)) |
| intel_irq_remap_ops.capability |= 1 << IRQ_POSTING_CAP; |
| |
| for_each_iommu(iommu, drhd) |
| if (!cap_pi_support(iommu->cap)) { |
| intel_irq_remap_ops.capability &= |
| ~(1 << IRQ_POSTING_CAP); |
| break; |
| } |
| } |
| } |
| |
| static int __init intel_enable_irq_remapping(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu; |
| bool setup = false; |
| |
| /* |
| * Setup Interrupt-remapping for all the DRHD's now. |
| */ |
| for_each_iommu(iommu, drhd) { |
| if (!ir_pre_enabled(iommu)) |
| iommu_enable_irq_remapping(iommu); |
| setup = true; |
| } |
| |
| if (!setup) |
| goto error; |
| |
| irq_remapping_enabled = 1; |
| |
| set_irq_posting_cap(); |
| |
| pr_info("Enabled IRQ remapping in %s mode\n", eim_mode ? "x2apic" : "xapic"); |
| |
| return eim_mode ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE; |
| |
| error: |
| intel_cleanup_irq_remapping(); |
| return -1; |
| } |
| |
| static int ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope, |
| struct intel_iommu *iommu, |
| struct acpi_dmar_hardware_unit *drhd) |
| { |
| struct acpi_dmar_pci_path *path; |
| u8 bus; |
| int count, free = -1; |
| |
| bus = scope->bus; |
| path = (struct acpi_dmar_pci_path *)(scope + 1); |
| count = (scope->length - sizeof(struct acpi_dmar_device_scope)) |
| / sizeof(struct acpi_dmar_pci_path); |
| |
| while (--count > 0) { |
| /* |
| * Access PCI directly due to the PCI |
| * subsystem isn't initialized yet. |
| */ |
| bus = read_pci_config_byte(bus, path->device, path->function, |
| PCI_SECONDARY_BUS); |
| path++; |
| } |
| |
| for (count = 0; count < MAX_HPET_TBS; count++) { |
| if (ir_hpet[count].iommu == iommu && |
| ir_hpet[count].id == scope->enumeration_id) |
| return 0; |
| else if (ir_hpet[count].iommu == NULL && free == -1) |
| free = count; |
| } |
| if (free == -1) { |
| pr_warn("Exceeded Max HPET blocks\n"); |
| return -ENOSPC; |
| } |
| |
| ir_hpet[free].iommu = iommu; |
| ir_hpet[free].id = scope->enumeration_id; |
| ir_hpet[free].bus = bus; |
| ir_hpet[free].devfn = PCI_DEVFN(path->device, path->function); |
| pr_info("HPET id %d under DRHD base 0x%Lx\n", |
| scope->enumeration_id, drhd->address); |
| |
| return 0; |
| } |
| |
| static int ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope, |
| struct intel_iommu *iommu, |
| struct acpi_dmar_hardware_unit *drhd) |
| { |
| struct acpi_dmar_pci_path *path; |
| u8 bus; |
| int count, free = -1; |
| |
| bus = scope->bus; |
| path = (struct acpi_dmar_pci_path *)(scope + 1); |
| count = (scope->length - sizeof(struct acpi_dmar_device_scope)) |
| / sizeof(struct acpi_dmar_pci_path); |
| |
| while (--count > 0) { |
| /* |
| * Access PCI directly due to the PCI |
| * subsystem isn't initialized yet. |
| */ |
| bus = read_pci_config_byte(bus, path->device, path->function, |
| PCI_SECONDARY_BUS); |
| path++; |
| } |
| |
| for (count = 0; count < MAX_IO_APICS; count++) { |
| if (ir_ioapic[count].iommu == iommu && |
| ir_ioapic[count].id == scope->enumeration_id) |
| return 0; |
| else if (ir_ioapic[count].iommu == NULL && free == -1) |
| free = count; |
| } |
| if (free == -1) { |
| pr_warn("Exceeded Max IO APICS\n"); |
| return -ENOSPC; |
| } |
| |
| ir_ioapic[free].bus = bus; |
| ir_ioapic[free].devfn = PCI_DEVFN(path->device, path->function); |
| ir_ioapic[free].iommu = iommu; |
| ir_ioapic[free].id = scope->enumeration_id; |
| pr_info("IOAPIC id %d under DRHD base 0x%Lx IOMMU %d\n", |
| scope->enumeration_id, drhd->address, iommu->seq_id); |
| |
| return 0; |
| } |
| |
| static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header, |
| struct intel_iommu *iommu) |
| { |
| int ret = 0; |
| struct acpi_dmar_hardware_unit *drhd; |
| struct acpi_dmar_device_scope *scope; |
| void *start, *end; |
| |
| drhd = (struct acpi_dmar_hardware_unit *)header; |
| start = (void *)(drhd + 1); |
| end = ((void *)drhd) + header->length; |
| |
| while (start < end && ret == 0) { |
| scope = start; |
| if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) |
| ret = ir_parse_one_ioapic_scope(scope, iommu, drhd); |
| else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET) |
| ret = ir_parse_one_hpet_scope(scope, iommu, drhd); |
| start += scope->length; |
| } |
| |
| return ret; |
| } |
| |
| static void ir_remove_ioapic_hpet_scope(struct intel_iommu *iommu) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_HPET_TBS; i++) |
| if (ir_hpet[i].iommu == iommu) |
| ir_hpet[i].iommu = NULL; |
| |
| for (i = 0; i < MAX_IO_APICS; i++) |
| if (ir_ioapic[i].iommu == iommu) |
| ir_ioapic[i].iommu = NULL; |
| } |
| |
| /* |
| * Finds the assocaition between IOAPIC's and its Interrupt-remapping |
| * hardware unit. |
| */ |
| static int __init parse_ioapics_under_ir(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu; |
| bool ir_supported = false; |
| int ioapic_idx; |
| |
| for_each_iommu(iommu, drhd) { |
| int ret; |
| |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| ret = ir_parse_ioapic_hpet_scope(drhd->hdr, iommu); |
| if (ret) |
| return ret; |
| |
| ir_supported = true; |
| } |
| |
| if (!ir_supported) |
| return -ENODEV; |
| |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { |
| int ioapic_id = mpc_ioapic_id(ioapic_idx); |
| if (!map_ioapic_to_ir(ioapic_id)) { |
| pr_err(FW_BUG "ioapic %d has no mapping iommu, " |
| "interrupt remapping will be disabled\n", |
| ioapic_id); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int __init ir_dev_scope_init(void) |
| { |
| int ret; |
| |
| if (!irq_remapping_enabled) |
| return 0; |
| |
| down_write(&dmar_global_lock); |
| ret = dmar_dev_scope_init(); |
| up_write(&dmar_global_lock); |
| |
| return ret; |
| } |
| rootfs_initcall(ir_dev_scope_init); |
| |
| static void disable_irq_remapping(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu = NULL; |
| |
| /* |
| * Disable Interrupt-remapping for all the DRHD's now. |
| */ |
| for_each_iommu(iommu, drhd) { |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| iommu_disable_irq_remapping(iommu); |
| } |
| |
| /* |
| * Clear Posted-Interrupts capability. |
| */ |
| if (!disable_irq_post) |
| intel_irq_remap_ops.capability &= ~(1 << IRQ_POSTING_CAP); |
| } |
| |
| static int reenable_irq_remapping(int eim) |
| { |
| struct dmar_drhd_unit *drhd; |
| bool setup = false; |
| struct intel_iommu *iommu = NULL; |
| |
| for_each_iommu(iommu, drhd) |
| if (iommu->qi) |
| dmar_reenable_qi(iommu); |
| |
| /* |
| * Setup Interrupt-remapping for all the DRHD's now. |
| */ |
| for_each_iommu(iommu, drhd) { |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| /* Set up interrupt remapping for iommu.*/ |
| iommu_set_irq_remapping(iommu, eim); |
| iommu_enable_irq_remapping(iommu); |
| setup = true; |
| } |
| |
| if (!setup) |
| goto error; |
| |
| set_irq_posting_cap(); |
| |
| return 0; |
| |
| error: |
| /* |
| * handle error condition gracefully here! |
| */ |
| return -1; |
| } |
| |
| static void prepare_irte(struct irte *irte, int vector, unsigned int dest) |
| { |
| memset(irte, 0, sizeof(*irte)); |
| |
| irte->present = 1; |
| irte->dst_mode = apic->irq_dest_mode; |
| /* |
| * Trigger mode in the IRTE will always be edge, and for IO-APIC, the |
| * actual level or edge trigger will be setup in the IO-APIC |
| * RTE. This will help simplify level triggered irq migration. |
| * For more details, see the comments (in io_apic.c) explainig IO-APIC |
| * irq migration in the presence of interrupt-remapping. |
| */ |
| irte->trigger_mode = 0; |
| irte->dlvry_mode = apic->irq_delivery_mode; |
| irte->vector = vector; |
| irte->dest_id = IRTE_DEST(dest); |
| irte->redir_hint = 1; |
| } |
| |
| static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info) |
| { |
| struct intel_iommu *iommu = NULL; |
| |
| if (!info) |
| return NULL; |
| |
| switch (info->type) { |
| case X86_IRQ_ALLOC_TYPE_IOAPIC: |
| iommu = map_ioapic_to_ir(info->ioapic_id); |
| break; |
| case X86_IRQ_ALLOC_TYPE_HPET: |
| iommu = map_hpet_to_ir(info->hpet_id); |
| break; |
| case X86_IRQ_ALLOC_TYPE_MSI: |
| case X86_IRQ_ALLOC_TYPE_MSIX: |
| iommu = map_dev_to_ir(info->msi_dev); |
| break; |
| default: |
| BUG_ON(1); |
| break; |
| } |
| |
| return iommu ? iommu->ir_domain : NULL; |
| } |
| |
| static struct irq_domain *intel_get_irq_domain(struct irq_alloc_info *info) |
| { |
| struct intel_iommu *iommu; |
| |
| if (!info) |
| return NULL; |
| |
| switch (info->type) { |
| case X86_IRQ_ALLOC_TYPE_MSI: |
| case X86_IRQ_ALLOC_TYPE_MSIX: |
| iommu = map_dev_to_ir(info->msi_dev); |
| if (iommu) |
| return iommu->ir_msi_domain; |
| break; |
| default: |
| break; |
| } |
| |
| return NULL; |
| } |
| |
| struct irq_remap_ops intel_irq_remap_ops = { |
| .prepare = intel_prepare_irq_remapping, |
| .enable = intel_enable_irq_remapping, |
| .disable = disable_irq_remapping, |
| .reenable = reenable_irq_remapping, |
| .enable_faulting = enable_drhd_fault_handling, |
| .get_ir_irq_domain = intel_get_ir_irq_domain, |
| .get_irq_domain = intel_get_irq_domain, |
| }; |
| |
| static void intel_ir_reconfigure_irte(struct irq_data *irqd, bool force) |
| { |
| struct intel_ir_data *ir_data = irqd->chip_data; |
| struct irte *irte = &ir_data->irte_entry; |
| struct irq_cfg *cfg = irqd_cfg(irqd); |
| |
| /* |
| * Atomically updates the IRTE with the new destination, vector |
| * and flushes the interrupt entry cache. |
| */ |
| irte->vector = cfg->vector; |
| irte->dest_id = IRTE_DEST(cfg->dest_apicid); |
| |
| /* Update the hardware only if the interrupt is in remapped mode. */ |
| if (force || ir_data->irq_2_iommu.mode == IRQ_REMAPPING) |
| modify_irte(&ir_data->irq_2_iommu, irte); |
| } |
| |
| /* |
| * Migrate the IO-APIC irq in the presence of intr-remapping. |
| * |
| * For both level and edge triggered, irq migration is a simple atomic |
| * update(of vector and cpu destination) of IRTE and flush the hardware cache. |
| * |
| * For level triggered, we eliminate the io-apic RTE modification (with the |
| * updated vector information), by using a virtual vector (io-apic pin number). |
| * Real vector that is used for interrupting cpu will be coming from |
| * the interrupt-remapping table entry. |
| * |
| * As the migration is a simple atomic update of IRTE, the same mechanism |
| * is used to migrate MSI irq's in the presence of interrupt-remapping. |
| */ |
| static int |
| intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask, |
| bool force) |
| { |
| struct irq_data *parent = data->parent_data; |
| struct irq_cfg *cfg = irqd_cfg(data); |
| int ret; |
| |
| ret = parent->chip->irq_set_affinity(parent, mask, force); |
| if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE) |
| return ret; |
| |
| intel_ir_reconfigure_irte(data, false); |
| /* |
| * After this point, all the interrupts will start arriving |
| * at the new destination. So, time to cleanup the previous |
| * vector allocation. |
| */ |
| send_cleanup_vector(cfg); |
| |
| return IRQ_SET_MASK_OK_DONE; |
| } |
| |
| static void intel_ir_compose_msi_msg(struct irq_data *irq_data, |
| struct msi_msg *msg) |
| { |
| struct intel_ir_data *ir_data = irq_data->chip_data; |
| |
| *msg = ir_data->msi_entry; |
| } |
| |
| static int intel_ir_set_vcpu_affinity(struct irq_data *data, void *info) |
| { |
| struct intel_ir_data *ir_data = data->chip_data; |
| struct vcpu_data *vcpu_pi_info = info; |
| |
| /* stop posting interrupts, back to remapping mode */ |
| if (!vcpu_pi_info) { |
| modify_irte(&ir_data->irq_2_iommu, &ir_data->irte_entry); |
| } else { |
| struct irte irte_pi; |
| |
| /* |
| * We are not caching the posted interrupt entry. We |
| * copy the data from the remapped entry and modify |
| * the fields which are relevant for posted mode. The |
| * cached remapped entry is used for switching back to |
| * remapped mode. |
| */ |
| memset(&irte_pi, 0, sizeof(irte_pi)); |
| dmar_copy_shared_irte(&irte_pi, &ir_data->irte_entry); |
| |
| /* Update the posted mode fields */ |
| irte_pi.p_pst = 1; |
| irte_pi.p_urgent = 0; |
| irte_pi.p_vector = vcpu_pi_info->vector; |
| irte_pi.pda_l = (vcpu_pi_info->pi_desc_addr >> |
| (32 - PDA_LOW_BIT)) & ~(-1UL << PDA_LOW_BIT); |
| irte_pi.pda_h = (vcpu_pi_info->pi_desc_addr >> 32) & |
| ~(-1UL << PDA_HIGH_BIT); |
| |
| modify_irte(&ir_data->irq_2_iommu, &irte_pi); |
| } |
| |
| return 0; |
| } |
| |
| static struct irq_chip intel_ir_chip = { |
| .name = "INTEL-IR", |
| .irq_ack = apic_ack_irq, |
| .irq_set_affinity = intel_ir_set_affinity, |
| .irq_compose_msi_msg = intel_ir_compose_msi_msg, |
| .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity, |
| }; |
| |
| static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data, |
| struct irq_cfg *irq_cfg, |
| struct irq_alloc_info *info, |
| int index, int sub_handle) |
| { |
| struct IR_IO_APIC_route_entry *entry; |
| struct irte *irte = &data->irte_entry; |
| struct msi_msg *msg = &data->msi_entry; |
| |
| prepare_irte(irte, irq_cfg->vector, irq_cfg->dest_apicid); |
| switch (info->type) { |
| case X86_IRQ_ALLOC_TYPE_IOAPIC: |
| /* Set source-id of interrupt request */ |
| set_ioapic_sid(irte, info->ioapic_id); |
| apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set IRTE entry (P:%d FPD:%d Dst_Mode:%d Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X Avail:%X Vector:%02X Dest:%08X SID:%04X SQ:%X SVT:%X)\n", |
| info->ioapic_id, irte->present, irte->fpd, |
| irte->dst_mode, irte->redir_hint, |
| irte->trigger_mode, irte->dlvry_mode, |
| irte->avail, irte->vector, irte->dest_id, |
| irte->sid, irte->sq, irte->svt); |
| |
| entry = (struct IR_IO_APIC_route_entry *)info->ioapic_entry; |
| info->ioapic_entry = NULL; |
| memset(entry, 0, sizeof(*entry)); |
| entry->index2 = (index >> 15) & 0x1; |
| entry->zero = 0; |
| entry->format = 1; |
| entry->index = (index & 0x7fff); |
| /* |
| * IO-APIC RTE will be configured with virtual vector. |
| * irq handler will do the explicit EOI to the io-apic. |
| */ |
| entry->vector = info->ioapic_pin; |
| entry->mask = 0; /* enable IRQ */ |
| entry->trigger = info->ioapic_trigger; |
| entry->polarity = info->ioapic_polarity; |
| if (info->ioapic_trigger) |
| entry->mask = 1; /* Mask level triggered irqs. */ |
| break; |
| |
| case X86_IRQ_ALLOC_TYPE_HPET: |
| case X86_IRQ_ALLOC_TYPE_MSI: |
| case X86_IRQ_ALLOC_TYPE_MSIX: |
| if (info->type == X86_IRQ_ALLOC_TYPE_HPET) |
| set_hpet_sid(irte, info->hpet_id); |
| else |
| set_msi_sid(irte, info->msi_dev); |
| |
| msg->address_hi = MSI_ADDR_BASE_HI; |
| msg->data = sub_handle; |
| msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | |
| MSI_ADDR_IR_SHV | |
| MSI_ADDR_IR_INDEX1(index) | |
| MSI_ADDR_IR_INDEX2(index); |
| break; |
| |
| default: |
| BUG_ON(1); |
| break; |
| } |
| } |
| |
| static void intel_free_irq_resources(struct irq_domain *domain, |
| unsigned int virq, unsigned int nr_irqs) |
| { |
| struct irq_data *irq_data; |
| struct intel_ir_data *data; |
| struct irq_2_iommu *irq_iommu; |
| unsigned long flags; |
| int i; |
| for (i = 0; i < nr_irqs; i++) { |
| irq_data = irq_domain_get_irq_data(domain, virq + i); |
| if (irq_data && irq_data->chip_data) { |
| data = irq_data->chip_data; |
| irq_iommu = &data->irq_2_iommu; |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| clear_entries(irq_iommu); |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| irq_domain_reset_irq_data(irq_data); |
| kfree(data); |
| } |
| } |
| } |
| |
| static int intel_irq_remapping_alloc(struct irq_domain *domain, |
| unsigned int virq, unsigned int nr_irqs, |
| void *arg) |
| { |
| struct intel_iommu *iommu = domain->host_data; |
| struct irq_alloc_info *info = arg; |
| struct intel_ir_data *data, *ird; |
| struct irq_data *irq_data; |
| struct irq_cfg *irq_cfg; |
| int i, ret, index; |
| |
| if (!info || !iommu) |
| return -EINVAL; |
| if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_MSI && |
| info->type != X86_IRQ_ALLOC_TYPE_MSIX) |
| return -EINVAL; |
| |
| /* |
| * With IRQ remapping enabled, don't need contiguous CPU vectors |
| * to support multiple MSI interrupts. |
| */ |
| if (info->type == X86_IRQ_ALLOC_TYPE_MSI) |
| info->flags &= ~X86_IRQ_ALLOC_CONTIGUOUS_VECTORS; |
| |
| ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg); |
| if (ret < 0) |
| return ret; |
| |
| ret = -ENOMEM; |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| goto out_free_parent; |
| |
| down_read(&dmar_global_lock); |
| index = alloc_irte(iommu, &data->irq_2_iommu, nr_irqs); |
| up_read(&dmar_global_lock); |
| if (index < 0) { |
| pr_warn("Failed to allocate IRTE\n"); |
| kfree(data); |
| goto out_free_parent; |
| } |
| |
| for (i = 0; i < nr_irqs; i++) { |
| irq_data = irq_domain_get_irq_data(domain, virq + i); |
| irq_cfg = irqd_cfg(irq_data); |
| if (!irq_data || !irq_cfg) { |
| ret = -EINVAL; |
| goto out_free_data; |
| } |
| |
| if (i > 0) { |
| ird = kzalloc(sizeof(*ird), GFP_KERNEL); |
| if (!ird) |
| goto out_free_data; |
| /* Initialize the common data */ |
| ird->irq_2_iommu = data->irq_2_iommu; |
| ird->irq_2_iommu.sub_handle = i; |
| } else { |
| ird = data; |
| } |
| |
| irq_data->hwirq = (index << 16) + i; |
| irq_data->chip_data = ird; |
| irq_data->chip = &intel_ir_chip; |
| intel_irq_remapping_prepare_irte(ird, irq_cfg, info, index, i); |
| irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT); |
| } |
| return 0; |
| |
| out_free_data: |
| intel_free_irq_resources(domain, virq, i); |
| out_free_parent: |
| irq_domain_free_irqs_common(domain, virq, nr_irqs); |
| return ret; |
| } |
| |
| static void intel_irq_remapping_free(struct irq_domain *domain, |
| unsigned int virq, unsigned int nr_irqs) |
| { |
| intel_free_irq_resources(domain, virq, nr_irqs); |
| irq_domain_free_irqs_common(domain, virq, nr_irqs); |
| } |
| |
| static int intel_irq_remapping_activate(struct irq_domain *domain, |
| struct irq_data *irq_data, bool reserve) |
| { |
| intel_ir_reconfigure_irte(irq_data, true); |
| return 0; |
| } |
| |
| static void intel_irq_remapping_deactivate(struct irq_domain *domain, |
| struct irq_data *irq_data) |
| { |
| struct intel_ir_data *data = irq_data->chip_data; |
| struct irte entry; |
| |
| memset(&entry, 0, sizeof(entry)); |
| modify_irte(&data->irq_2_iommu, &entry); |
| } |
| |
| static const struct irq_domain_ops intel_ir_domain_ops = { |
| .alloc = intel_irq_remapping_alloc, |
| .free = intel_irq_remapping_free, |
| .activate = intel_irq_remapping_activate, |
| .deactivate = intel_irq_remapping_deactivate, |
| }; |
| |
| /* |
| * Support of Interrupt Remapping Unit Hotplug |
| */ |
| static int dmar_ir_add(struct dmar_drhd_unit *dmaru, struct intel_iommu *iommu) |
| { |
| int ret; |
| int eim = x2apic_enabled(); |
| |
| if (eim && !ecap_eim_support(iommu->ecap)) { |
| pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n", |
| iommu->reg_phys, iommu->ecap); |
| return -ENODEV; |
| } |
| |
| if (ir_parse_ioapic_hpet_scope(dmaru->hdr, iommu)) { |
| pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n", |
| iommu->reg_phys); |
| return -ENODEV; |
| } |
| |
| /* TODO: check all IOAPICs are covered by IOMMU */ |
| |
| /* Setup Interrupt-remapping now. */ |
| ret = intel_setup_irq_remapping(iommu); |
| if (ret) { |
| pr_err("Failed to setup irq remapping for %s\n", |
| iommu->name); |
| intel_teardown_irq_remapping(iommu); |
| ir_remove_ioapic_hpet_scope(iommu); |
| } else { |
| iommu_enable_irq_remapping(iommu); |
| } |
| |
| return ret; |
| } |
| |
| int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert) |
| { |
| int ret = 0; |
| struct intel_iommu *iommu = dmaru->iommu; |
| |
| if (!irq_remapping_enabled) |
| return 0; |
| if (iommu == NULL) |
| return -EINVAL; |
| if (!ecap_ir_support(iommu->ecap)) |
| return 0; |
| if (irq_remapping_cap(IRQ_POSTING_CAP) && |
| !cap_pi_support(iommu->cap)) |
| return -EBUSY; |
| |
| if (insert) { |
| if (!iommu->ir_table) |
| ret = dmar_ir_add(dmaru, iommu); |
| } else { |
| if (iommu->ir_table) { |
| if (!bitmap_empty(iommu->ir_table->bitmap, |
| INTR_REMAP_TABLE_ENTRIES)) { |
| ret = -EBUSY; |
| } else { |
| iommu_disable_irq_remapping(iommu); |
| intel_teardown_irq_remapping(iommu); |
| ir_remove_ioapic_hpet_scope(iommu); |
| } |
| } |
| } |
| |
| return ret; |
| } |