| /* |
| * ioport.c: Simple io mapping allocator. |
| * |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) |
| * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx) |
| * |
| * 1996: sparc_free_io, 1999: ioremap()/iounmap() by Pete Zaitcev. |
| * |
| * 2000/01/29 |
| * <rth> zait: as long as pci_alloc_consistent produces something addressable, |
| * things are ok. |
| * <zaitcev> rth: no, it is relevant, because get_free_pages returns you a |
| * pointer into the big page mapping |
| * <rth> zait: so what? |
| * <rth> zait: remap_it_my_way(virt_to_phys(get_free_page())) |
| * <zaitcev> Hmm |
| * <zaitcev> Suppose I did this remap_it_my_way(virt_to_phys(get_free_page())). |
| * So far so good. |
| * <zaitcev> Now, driver calls pci_free_consistent(with result of |
| * remap_it_my_way()). |
| * <zaitcev> How do you find the address to pass to free_pages()? |
| * <rth> zait: walk the page tables? It's only two or three level after all. |
| * <rth> zait: you have to walk them anyway to remove the mapping. |
| * <zaitcev> Hmm |
| * <zaitcev> Sounds reasonable |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> /* struct pci_dev */ |
| #include <linux/proc_fs.h> |
| #include <linux/scatterlist.h> |
| |
| #include <asm/io.h> |
| #include <asm/vaddrs.h> |
| #include <asm/oplib.h> |
| #include <asm/prom.h> |
| #include <asm/of_device.h> |
| #include <asm/sbus.h> |
| #include <asm/page.h> |
| #include <asm/pgalloc.h> |
| #include <asm/dma.h> |
| |
| #define mmu_inval_dma_area(p, l) /* Anton pulled it out for 2.4.0-xx */ |
| |
| struct resource *_sparc_find_resource(struct resource *r, unsigned long); |
| |
| static void __iomem *_sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz); |
| static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys, |
| unsigned long size, char *name); |
| static void _sparc_free_io(struct resource *res); |
| |
| /* This points to the next to use virtual memory for DVMA mappings */ |
| static struct resource _sparc_dvma = { |
| .name = "sparc_dvma", .start = DVMA_VADDR, .end = DVMA_END - 1 |
| }; |
| /* This points to the start of I/O mappings, cluable from outside. */ |
| /*ext*/ struct resource sparc_iomap = { |
| .name = "sparc_iomap", .start = IOBASE_VADDR, .end = IOBASE_END - 1 |
| }; |
| |
| /* |
| * Our mini-allocator... |
| * Boy this is gross! We need it because we must map I/O for |
| * timers and interrupt controller before the kmalloc is available. |
| */ |
| |
| #define XNMLN 15 |
| #define XNRES 10 /* SS-10 uses 8 */ |
| |
| struct xresource { |
| struct resource xres; /* Must be first */ |
| int xflag; /* 1 == used */ |
| char xname[XNMLN+1]; |
| }; |
| |
| static struct xresource xresv[XNRES]; |
| |
| static struct xresource *xres_alloc(void) { |
| struct xresource *xrp; |
| int n; |
| |
| xrp = xresv; |
| for (n = 0; n < XNRES; n++) { |
| if (xrp->xflag == 0) { |
| xrp->xflag = 1; |
| return xrp; |
| } |
| xrp++; |
| } |
| return NULL; |
| } |
| |
| static void xres_free(struct xresource *xrp) { |
| xrp->xflag = 0; |
| } |
| |
| /* |
| * These are typically used in PCI drivers |
| * which are trying to be cross-platform. |
| * |
| * Bus type is always zero on IIep. |
| */ |
| void __iomem *ioremap(unsigned long offset, unsigned long size) |
| { |
| char name[14]; |
| |
| sprintf(name, "phys_%08x", (u32)offset); |
| return _sparc_alloc_io(0, offset, size, name); |
| } |
| |
| /* |
| * Comlimentary to ioremap(). |
| */ |
| void iounmap(volatile void __iomem *virtual) |
| { |
| unsigned long vaddr = (unsigned long) virtual & PAGE_MASK; |
| struct resource *res; |
| |
| if ((res = _sparc_find_resource(&sparc_iomap, vaddr)) == NULL) { |
| printk("free_io/iounmap: cannot free %lx\n", vaddr); |
| return; |
| } |
| _sparc_free_io(res); |
| |
| if ((char *)res >= (char*)xresv && (char *)res < (char *)&xresv[XNRES]) { |
| xres_free((struct xresource *)res); |
| } else { |
| kfree(res); |
| } |
| } |
| |
| /* |
| */ |
| void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset, |
| unsigned long size, char *name) |
| { |
| return _sparc_alloc_io(phyres->flags & 0xF, |
| phyres->start + offset, size, name); |
| } |
| |
| void __iomem *of_ioremap(struct resource *res, unsigned long offset, |
| unsigned long size, char *name) |
| { |
| return _sparc_alloc_io(res->flags & 0xF, |
| res->start + offset, |
| size, name); |
| } |
| EXPORT_SYMBOL(of_ioremap); |
| |
| void of_iounmap(struct resource *res, void __iomem *base, unsigned long size) |
| { |
| iounmap(base); |
| } |
| EXPORT_SYMBOL(of_iounmap); |
| |
| /* |
| */ |
| void sbus_iounmap(volatile void __iomem *addr, unsigned long size) |
| { |
| iounmap(addr); |
| } |
| |
| /* |
| * Meat of mapping |
| */ |
| static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys, |
| unsigned long size, char *name) |
| { |
| static int printed_full; |
| struct xresource *xres; |
| struct resource *res; |
| char *tack; |
| int tlen; |
| void __iomem *va; /* P3 diag */ |
| |
| if (name == NULL) name = "???"; |
| |
| if ((xres = xres_alloc()) != 0) { |
| tack = xres->xname; |
| res = &xres->xres; |
| } else { |
| if (!printed_full) { |
| printk("ioremap: done with statics, switching to malloc\n"); |
| printed_full = 1; |
| } |
| tlen = strlen(name); |
| tack = kmalloc(sizeof (struct resource) + tlen + 1, GFP_KERNEL); |
| if (tack == NULL) return NULL; |
| memset(tack, 0, sizeof(struct resource)); |
| res = (struct resource *) tack; |
| tack += sizeof (struct resource); |
| } |
| |
| strlcpy(tack, name, XNMLN+1); |
| res->name = tack; |
| |
| va = _sparc_ioremap(res, busno, phys, size); |
| /* printk("ioremap(0x%x:%08lx[0x%lx])=%p\n", busno, phys, size, va); */ /* P3 diag */ |
| return va; |
| } |
| |
| /* |
| */ |
| static void __iomem * |
| _sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz) |
| { |
| unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK); |
| |
| if (allocate_resource(&sparc_iomap, res, |
| (offset + sz + PAGE_SIZE-1) & PAGE_MASK, |
| sparc_iomap.start, sparc_iomap.end, PAGE_SIZE, NULL, NULL) != 0) { |
| /* Usually we cannot see printks in this case. */ |
| prom_printf("alloc_io_res(%s): cannot occupy\n", |
| (res->name != NULL)? res->name: "???"); |
| prom_halt(); |
| } |
| |
| pa &= PAGE_MASK; |
| sparc_mapiorange(bus, pa, res->start, res->end - res->start + 1); |
| |
| return (void __iomem *)(unsigned long)(res->start + offset); |
| } |
| |
| /* |
| * Comlimentary to _sparc_ioremap(). |
| */ |
| static void _sparc_free_io(struct resource *res) |
| { |
| unsigned long plen; |
| |
| plen = res->end - res->start + 1; |
| BUG_ON((plen & (PAGE_SIZE-1)) != 0); |
| sparc_unmapiorange(res->start, plen); |
| release_resource(res); |
| } |
| |
| #ifdef CONFIG_SBUS |
| |
| void sbus_set_sbus64(struct sbus_dev *sdev, int x) |
| { |
| printk("sbus_set_sbus64: unsupported\n"); |
| } |
| |
| extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq); |
| void __init sbus_fill_device_irq(struct sbus_dev *sdev) |
| { |
| struct linux_prom_irqs irqs[PROMINTR_MAX]; |
| int len; |
| |
| len = prom_getproperty(sdev->prom_node, "intr", |
| (char *)irqs, sizeof(irqs)); |
| if (len != -1) { |
| sdev->num_irqs = len / 8; |
| if (sdev->num_irqs == 0) { |
| sdev->irqs[0] = 0; |
| } else if (sparc_cpu_model == sun4d) { |
| for (len = 0; len < sdev->num_irqs; len++) |
| sdev->irqs[len] = |
| sun4d_build_irq(sdev, irqs[len].pri); |
| } else { |
| for (len = 0; len < sdev->num_irqs; len++) |
| sdev->irqs[len] = irqs[len].pri; |
| } |
| } else { |
| int interrupts[PROMINTR_MAX]; |
| |
| /* No "intr" node found-- check for "interrupts" node. |
| * This node contains SBus interrupt levels, not IPLs |
| * as in "intr", and no vector values. We convert |
| * SBus interrupt levels to PILs (platform specific). |
| */ |
| len = prom_getproperty(sdev->prom_node, "interrupts", |
| (char *)interrupts, sizeof(interrupts)); |
| if (len == -1) { |
| sdev->irqs[0] = 0; |
| sdev->num_irqs = 0; |
| } else { |
| sdev->num_irqs = len / sizeof(int); |
| for (len = 0; len < sdev->num_irqs; len++) { |
| sdev->irqs[len] = |
| sbint_to_irq(sdev, interrupts[len]); |
| } |
| } |
| } |
| } |
| |
| /* |
| * Allocate a chunk of memory suitable for DMA. |
| * Typically devices use them for control blocks. |
| * CPU may access them without any explicit flushing. |
| * |
| * XXX Some clever people know that sdev is not used and supply NULL. Watch. |
| */ |
| void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) |
| { |
| unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK; |
| unsigned long va; |
| struct resource *res; |
| int order; |
| |
| /* XXX why are some lengths signed, others unsigned? */ |
| if (len <= 0) { |
| return NULL; |
| } |
| /* XXX So what is maxphys for us and how do drivers know it? */ |
| if (len > 256*1024) { /* __get_free_pages() limit */ |
| return NULL; |
| } |
| |
| order = get_order(len_total); |
| if ((va = __get_free_pages(GFP_KERNEL|__GFP_COMP, order)) == 0) |
| goto err_nopages; |
| |
| if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) |
| goto err_nomem; |
| |
| if (allocate_resource(&_sparc_dvma, res, len_total, |
| _sparc_dvma.start, _sparc_dvma.end, PAGE_SIZE, NULL, NULL) != 0) { |
| printk("sbus_alloc_consistent: cannot occupy 0x%lx", len_total); |
| goto err_nova; |
| } |
| mmu_inval_dma_area(va, len_total); |
| // XXX The mmu_map_dma_area does this for us below, see comments. |
| // sparc_mapiorange(0, virt_to_phys(va), res->start, len_total); |
| /* |
| * XXX That's where sdev would be used. Currently we load |
| * all iommu tables with the same translations. |
| */ |
| if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0) |
| goto err_noiommu; |
| |
| /* Set the resource name, if known. */ |
| if (sdev) { |
| res->name = sdev->prom_name; |
| } |
| |
| return (void *)(unsigned long)res->start; |
| |
| err_noiommu: |
| release_resource(res); |
| err_nova: |
| free_pages(va, order); |
| err_nomem: |
| kfree(res); |
| err_nopages: |
| return NULL; |
| } |
| |
| void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) |
| { |
| struct resource *res; |
| struct page *pgv; |
| |
| if ((res = _sparc_find_resource(&_sparc_dvma, |
| (unsigned long)p)) == NULL) { |
| printk("sbus_free_consistent: cannot free %p\n", p); |
| return; |
| } |
| |
| if (((unsigned long)p & (PAGE_SIZE-1)) != 0) { |
| printk("sbus_free_consistent: unaligned va %p\n", p); |
| return; |
| } |
| |
| n = (n + PAGE_SIZE-1) & PAGE_MASK; |
| if ((res->end-res->start)+1 != n) { |
| printk("sbus_free_consistent: region 0x%lx asked 0x%lx\n", |
| (long)((res->end-res->start)+1), n); |
| return; |
| } |
| |
| release_resource(res); |
| kfree(res); |
| |
| /* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */ |
| pgv = mmu_translate_dvma(ba); |
| mmu_unmap_dma_area(ba, n); |
| |
| __free_pages(pgv, get_order(n)); |
| } |
| |
| /* |
| * Map a chunk of memory so that devices can see it. |
| * CPU view of this memory may be inconsistent with |
| * a device view and explicit flushing is necessary. |
| */ |
| dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction) |
| { |
| /* XXX why are some lengths signed, others unsigned? */ |
| if (len <= 0) { |
| return 0; |
| } |
| /* XXX So what is maxphys for us and how do drivers know it? */ |
| if (len > 256*1024) { /* __get_free_pages() limit */ |
| return 0; |
| } |
| return mmu_get_scsi_one(va, len, sdev->bus); |
| } |
| |
| void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction) |
| { |
| mmu_release_scsi_one(ba, n, sdev->bus); |
| } |
| |
| int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) |
| { |
| mmu_get_scsi_sgl(sg, n, sdev->bus); |
| |
| /* |
| * XXX sparc64 can return a partial length here. sun4c should do this |
| * but it currently panics if it can't fulfill the request - Anton |
| */ |
| return n; |
| } |
| |
| void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) |
| { |
| mmu_release_scsi_sgl(sg, n, sdev->bus); |
| } |
| |
| /* |
| */ |
| void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction) |
| { |
| #if 0 |
| unsigned long va; |
| struct resource *res; |
| |
| /* We do not need the resource, just print a message if invalid. */ |
| res = _sparc_find_resource(&_sparc_dvma, ba); |
| if (res == NULL) |
| panic("sbus_dma_sync_single: 0x%x\n", ba); |
| |
| va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */ |
| /* |
| * XXX This bogosity will be fixed with the iommu rewrite coming soon |
| * to a kernel near you. - Anton |
| */ |
| /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */ |
| #endif |
| } |
| |
| void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction) |
| { |
| #if 0 |
| unsigned long va; |
| struct resource *res; |
| |
| /* We do not need the resource, just print a message if invalid. */ |
| res = _sparc_find_resource(&_sparc_dvma, ba); |
| if (res == NULL) |
| panic("sbus_dma_sync_single: 0x%x\n", ba); |
| |
| va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */ |
| /* |
| * XXX This bogosity will be fixed with the iommu rewrite coming soon |
| * to a kernel near you. - Anton |
| */ |
| /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */ |
| #endif |
| } |
| |
| void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) |
| { |
| printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n"); |
| } |
| |
| void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) |
| { |
| printk("sbus_dma_sync_sg_for_device: not implemented yet\n"); |
| } |
| |
| /* Support code for sbus_init(). */ |
| /* |
| * XXX This functions appears to be a distorted version of |
| * prom_sbus_ranges_init(), with all sun4d stuff cut away. |
| * Ask DaveM what is going on here, how is sun4d supposed to work... XXX |
| */ |
| /* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */ |
| void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus) |
| { |
| int parent_node = pn->node; |
| |
| if (sparc_cpu_model == sun4d) { |
| struct linux_prom_ranges iounit_ranges[PROMREG_MAX]; |
| int num_iounit_ranges, len; |
| |
| len = prom_getproperty(parent_node, "ranges", |
| (char *) iounit_ranges, |
| sizeof (iounit_ranges)); |
| if (len != -1) { |
| num_iounit_ranges = |
| (len / sizeof(struct linux_prom_ranges)); |
| prom_adjust_ranges(sbus->sbus_ranges, |
| sbus->num_sbus_ranges, |
| iounit_ranges, num_iounit_ranges); |
| } |
| } |
| } |
| |
| void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp) |
| { |
| #ifndef CONFIG_SUN4 |
| struct device_node *parent = dp->parent; |
| |
| if (sparc_cpu_model != sun4d && |
| parent != NULL && |
| !strcmp(parent->name, "iommu")) { |
| extern void iommu_init(int iommu_node, struct sbus_bus *sbus); |
| |
| iommu_init(parent->node, sbus); |
| } |
| |
| if (sparc_cpu_model == sun4d) { |
| extern void iounit_init(int sbi_node, int iounit_node, |
| struct sbus_bus *sbus); |
| |
| iounit_init(dp->node, parent->node, sbus); |
| } |
| #endif |
| } |
| |
| void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp) |
| { |
| if (sparc_cpu_model == sun4d) { |
| struct device_node *parent = dp->parent; |
| |
| sbus->devid = of_getintprop_default(parent, "device-id", 0); |
| sbus->board = of_getintprop_default(parent, "board#", 0); |
| } |
| } |
| |
| int __init sbus_arch_preinit(void) |
| { |
| extern void register_proc_sparc_ioport(void); |
| |
| register_proc_sparc_ioport(); |
| |
| #ifdef CONFIG_SUN4 |
| { |
| extern void sun4_dvma_init(void); |
| sun4_dvma_init(); |
| } |
| return 1; |
| #else |
| return 0; |
| #endif |
| } |
| |
| void __init sbus_arch_postinit(void) |
| { |
| if (sparc_cpu_model == sun4d) { |
| extern void sun4d_init_sbi_irq(void); |
| sun4d_init_sbi_irq(); |
| } |
| } |
| #endif /* CONFIG_SBUS */ |
| |
| #ifdef CONFIG_PCI |
| |
| /* Allocate and map kernel buffer using consistent mode DMA for a device. |
| * hwdev should be valid struct pci_dev pointer for PCI devices. |
| */ |
| void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba) |
| { |
| unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK; |
| unsigned long va; |
| struct resource *res; |
| int order; |
| |
| if (len == 0) { |
| return NULL; |
| } |
| if (len > 256*1024) { /* __get_free_pages() limit */ |
| return NULL; |
| } |
| |
| order = get_order(len_total); |
| va = __get_free_pages(GFP_KERNEL, order); |
| if (va == 0) { |
| printk("pci_alloc_consistent: no %ld pages\n", len_total>>PAGE_SHIFT); |
| return NULL; |
| } |
| |
| if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) { |
| free_pages(va, order); |
| printk("pci_alloc_consistent: no core\n"); |
| return NULL; |
| } |
| |
| if (allocate_resource(&_sparc_dvma, res, len_total, |
| _sparc_dvma.start, _sparc_dvma.end, PAGE_SIZE, NULL, NULL) != 0) { |
| printk("pci_alloc_consistent: cannot occupy 0x%lx", len_total); |
| free_pages(va, order); |
| kfree(res); |
| return NULL; |
| } |
| mmu_inval_dma_area(va, len_total); |
| #if 0 |
| /* P3 */ printk("pci_alloc_consistent: kva %lx uncva %lx phys %lx size %lx\n", |
| (long)va, (long)res->start, (long)virt_to_phys(va), len_total); |
| #endif |
| sparc_mapiorange(0, virt_to_phys(va), res->start, len_total); |
| |
| *pba = virt_to_phys(va); /* equals virt_to_bus (R.I.P.) for us. */ |
| return (void *) res->start; |
| } |
| |
| /* Free and unmap a consistent DMA buffer. |
| * cpu_addr is what was returned from pci_alloc_consistent, |
| * size must be the same as what as passed into pci_alloc_consistent, |
| * and likewise dma_addr must be the same as what *dma_addrp was set to. |
| * |
| * References to the memory and mappings associated with cpu_addr/dma_addr |
| * past this call are illegal. |
| */ |
| void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba) |
| { |
| struct resource *res; |
| unsigned long pgp; |
| |
| if ((res = _sparc_find_resource(&_sparc_dvma, |
| (unsigned long)p)) == NULL) { |
| printk("pci_free_consistent: cannot free %p\n", p); |
| return; |
| } |
| |
| if (((unsigned long)p & (PAGE_SIZE-1)) != 0) { |
| printk("pci_free_consistent: unaligned va %p\n", p); |
| return; |
| } |
| |
| n = (n + PAGE_SIZE-1) & PAGE_MASK; |
| if ((res->end-res->start)+1 != n) { |
| printk("pci_free_consistent: region 0x%lx asked 0x%lx\n", |
| (long)((res->end-res->start)+1), (long)n); |
| return; |
| } |
| |
| pgp = (unsigned long) phys_to_virt(ba); /* bus_to_virt actually */ |
| mmu_inval_dma_area(pgp, n); |
| sparc_unmapiorange((unsigned long)p, n); |
| |
| release_resource(res); |
| kfree(res); |
| |
| free_pages(pgp, get_order(n)); |
| } |
| |
| /* Map a single buffer of the indicated size for DMA in streaming mode. |
| * The 32-bit bus address to use is returned. |
| * |
| * Once the device is given the dma address, the device owns this memory |
| * until either pci_unmap_single or pci_dma_sync_single_* is performed. |
| */ |
| dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, |
| int direction) |
| { |
| BUG_ON(direction == PCI_DMA_NONE); |
| /* IIep is write-through, not flushing. */ |
| return virt_to_phys(ptr); |
| } |
| |
| /* Unmap a single streaming mode DMA translation. The dma_addr and size |
| * must match what was provided for in a previous pci_map_single call. All |
| * other usages are undefined. |
| * |
| * After this call, reads by the cpu to the buffer are guaranteed to see |
| * whatever the device wrote there. |
| */ |
| void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size, |
| int direction) |
| { |
| BUG_ON(direction == PCI_DMA_NONE); |
| if (direction != PCI_DMA_TODEVICE) { |
| mmu_inval_dma_area((unsigned long)phys_to_virt(ba), |
| (size + PAGE_SIZE-1) & PAGE_MASK); |
| } |
| } |
| |
| /* |
| * Same as pci_map_single, but with pages. |
| */ |
| dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page, |
| unsigned long offset, size_t size, int direction) |
| { |
| BUG_ON(direction == PCI_DMA_NONE); |
| /* IIep is write-through, not flushing. */ |
| return page_to_phys(page) + offset; |
| } |
| |
| void pci_unmap_page(struct pci_dev *hwdev, |
| dma_addr_t dma_address, size_t size, int direction) |
| { |
| BUG_ON(direction == PCI_DMA_NONE); |
| /* mmu_inval_dma_area XXX */ |
| } |
| |
| /* Map a set of buffers described by scatterlist in streaming |
| * mode for DMA. This is the scather-gather version of the |
| * above pci_map_single interface. Here the scatter gather list |
| * elements are each tagged with the appropriate dma address |
| * and length. They are obtained via sg_dma_{address,length}(SG). |
| * |
| * NOTE: An implementation may be able to use a smaller number of |
| * DMA address/length pairs than there are SG table elements. |
| * (for example via virtual mapping capabilities) |
| * The routine returns the number of addr/length pairs actually |
| * used, at most nents. |
| * |
| * Device ownership issues as mentioned above for pci_map_single are |
| * the same here. |
| */ |
| int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, |
| int direction) |
| { |
| struct scatterlist *sg; |
| int n; |
| |
| BUG_ON(direction == PCI_DMA_NONE); |
| /* IIep is write-through, not flushing. */ |
| for_each_sg(sgl, sg, nents, n) { |
| BUG_ON(page_address(sg_page(sg)) == NULL); |
| sg->dvma_address = virt_to_phys(sg_virt(sg)); |
| sg->dvma_length = sg->length; |
| } |
| return nents; |
| } |
| |
| /* Unmap a set of streaming mode DMA translations. |
| * Again, cpu read rules concerning calls here are the same as for |
| * pci_unmap_single() above. |
| */ |
| void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, |
| int direction) |
| { |
| struct scatterlist *sg; |
| int n; |
| |
| BUG_ON(direction == PCI_DMA_NONE); |
| if (direction != PCI_DMA_TODEVICE) { |
| for_each_sg(sgl, sg, nents, n) { |
| BUG_ON(page_address(sg_page(sg)) == NULL); |
| mmu_inval_dma_area( |
| (unsigned long) page_address(sg_page(sg)), |
| (sg->length + PAGE_SIZE-1) & PAGE_MASK); |
| } |
| } |
| } |
| |
| /* Make physical memory consistent for a single |
| * streaming mode DMA translation before or after a transfer. |
| * |
| * If you perform a pci_map_single() but wish to interrogate the |
| * buffer using the cpu, yet do not wish to teardown the PCI dma |
| * mapping, you must call this function before doing so. At the |
| * next point you give the PCI dma address back to the card, you |
| * must first perform a pci_dma_sync_for_device, and then the |
| * device again owns the buffer. |
| */ |
| void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction) |
| { |
| BUG_ON(direction == PCI_DMA_NONE); |
| if (direction != PCI_DMA_TODEVICE) { |
| mmu_inval_dma_area((unsigned long)phys_to_virt(ba), |
| (size + PAGE_SIZE-1) & PAGE_MASK); |
| } |
| } |
| |
| void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction) |
| { |
| BUG_ON(direction == PCI_DMA_NONE); |
| if (direction != PCI_DMA_TODEVICE) { |
| mmu_inval_dma_area((unsigned long)phys_to_virt(ba), |
| (size + PAGE_SIZE-1) & PAGE_MASK); |
| } |
| } |
| |
| /* Make physical memory consistent for a set of streaming |
| * mode DMA translations after a transfer. |
| * |
| * The same as pci_dma_sync_single_* but for a scatter-gather list, |
| * same rules and usage. |
| */ |
| void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction) |
| { |
| struct scatterlist *sg; |
| int n; |
| |
| BUG_ON(direction == PCI_DMA_NONE); |
| if (direction != PCI_DMA_TODEVICE) { |
| for_each_sg(sgl, sg, nents, n) { |
| BUG_ON(page_address(sg_page(sg)) == NULL); |
| mmu_inval_dma_area( |
| (unsigned long) page_address(sg_page(sg)), |
| (sg->length + PAGE_SIZE-1) & PAGE_MASK); |
| } |
| } |
| } |
| |
| void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction) |
| { |
| struct scatterlist *sg; |
| int n; |
| |
| BUG_ON(direction == PCI_DMA_NONE); |
| if (direction != PCI_DMA_TODEVICE) { |
| for_each_sg(sgl, sg, nents, n) { |
| BUG_ON(page_address(sg_page(sg)) == NULL); |
| mmu_inval_dma_area( |
| (unsigned long) page_address(sg_page(sg)), |
| (sg->length + PAGE_SIZE-1) & PAGE_MASK); |
| } |
| } |
| } |
| #endif /* CONFIG_PCI */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| static int |
| _sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof, |
| void *data) |
| { |
| char *p = buf, *e = buf + length; |
| struct resource *r; |
| const char *nm; |
| |
| for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) { |
| if (p + 32 >= e) /* Better than nothing */ |
| break; |
| if ((nm = r->name) == 0) nm = "???"; |
| p += sprintf(p, "%016llx-%016llx: %s\n", |
| (unsigned long long)r->start, |
| (unsigned long long)r->end, nm); |
| } |
| |
| return p-buf; |
| } |
| |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * This is a version of find_resource and it belongs to kernel/resource.c. |
| * Until we have agreement with Linus and Martin, it lingers here. |
| * |
| * XXX Too slow. Can have 8192 DVMA pages on sun4m in the worst case. |
| * This probably warrants some sort of hashing. |
| */ |
| struct resource * |
| _sparc_find_resource(struct resource *root, unsigned long hit) |
| { |
| struct resource *tmp; |
| |
| for (tmp = root->child; tmp != 0; tmp = tmp->sibling) { |
| if (tmp->start <= hit && tmp->end >= hit) |
| return tmp; |
| } |
| return NULL; |
| } |
| |
| void register_proc_sparc_ioport(void) |
| { |
| #ifdef CONFIG_PROC_FS |
| create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap); |
| create_proc_read_entry("dvma_map",0,NULL,_sparc_io_get_info,&_sparc_dvma); |
| #endif |
| } |