| /* |
| * i.MX drm driver - LVDS display bridge |
| * |
| * Copyright (C) 2012 Sascha Hauer, Pengutronix |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <video/of_videomode.h> |
| #include <linux/regmap.h> |
| #include <linux/videodev2.h> |
| |
| #include "imx-drm.h" |
| |
| #define DRIVER_NAME "imx-ldb" |
| |
| #define LDB_CH0_MODE_EN_TO_DI0 (1 << 0) |
| #define LDB_CH0_MODE_EN_TO_DI1 (3 << 0) |
| #define LDB_CH0_MODE_EN_MASK (3 << 0) |
| #define LDB_CH1_MODE_EN_TO_DI0 (1 << 2) |
| #define LDB_CH1_MODE_EN_TO_DI1 (3 << 2) |
| #define LDB_CH1_MODE_EN_MASK (3 << 2) |
| #define LDB_SPLIT_MODE_EN (1 << 4) |
| #define LDB_DATA_WIDTH_CH0_24 (1 << 5) |
| #define LDB_BIT_MAP_CH0_JEIDA (1 << 6) |
| #define LDB_DATA_WIDTH_CH1_24 (1 << 7) |
| #define LDB_BIT_MAP_CH1_JEIDA (1 << 8) |
| #define LDB_DI0_VS_POL_ACT_LOW (1 << 9) |
| #define LDB_DI1_VS_POL_ACT_LOW (1 << 10) |
| #define LDB_BGREF_RMODE_INT (1 << 15) |
| |
| #define con_to_imx_ldb_ch(x) container_of(x, struct imx_ldb_channel, connector) |
| #define enc_to_imx_ldb_ch(x) container_of(x, struct imx_ldb_channel, encoder) |
| |
| struct imx_ldb; |
| |
| struct imx_ldb_channel { |
| struct imx_ldb *ldb; |
| struct drm_connector connector; |
| struct imx_drm_connector *imx_drm_connector; |
| struct drm_encoder encoder; |
| struct imx_drm_encoder *imx_drm_encoder; |
| int chno; |
| void *edid; |
| int edid_len; |
| struct drm_display_mode mode; |
| int mode_valid; |
| }; |
| |
| struct bus_mux { |
| int reg; |
| int shift; |
| int mask; |
| }; |
| |
| struct imx_ldb { |
| struct regmap *regmap; |
| struct device *dev; |
| struct imx_ldb_channel channel[2]; |
| struct clk *clk[2]; /* our own clock */ |
| struct clk *clk_sel[4]; /* parent of display clock */ |
| struct clk *clk_pll[2]; /* upstream clock we can adjust */ |
| u32 ldb_ctrl; |
| const struct bus_mux *lvds_mux; |
| }; |
| |
| static enum drm_connector_status imx_ldb_connector_detect( |
| struct drm_connector *connector, bool force) |
| { |
| return connector_status_connected; |
| } |
| |
| static void imx_ldb_connector_destroy(struct drm_connector *connector) |
| { |
| /* do not free here */ |
| } |
| |
| static int imx_ldb_connector_get_modes(struct drm_connector *connector) |
| { |
| struct imx_ldb_channel *imx_ldb_ch = con_to_imx_ldb_ch(connector); |
| int num_modes = 0; |
| |
| if (imx_ldb_ch->edid) { |
| drm_mode_connector_update_edid_property(connector, |
| imx_ldb_ch->edid); |
| num_modes = drm_add_edid_modes(connector, imx_ldb_ch->edid); |
| } |
| |
| if (imx_ldb_ch->mode_valid) { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_create(connector->dev); |
| drm_mode_copy(mode, &imx_ldb_ch->mode); |
| mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; |
| drm_mode_probed_add(connector, mode); |
| num_modes++; |
| } |
| |
| return num_modes; |
| } |
| |
| static int imx_ldb_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| return 0; |
| } |
| |
| static struct drm_encoder *imx_ldb_connector_best_encoder( |
| struct drm_connector *connector) |
| { |
| struct imx_ldb_channel *imx_ldb_ch = con_to_imx_ldb_ch(connector); |
| |
| return &imx_ldb_ch->encoder; |
| } |
| |
| static void imx_ldb_encoder_dpms(struct drm_encoder *encoder, int mode) |
| { |
| } |
| |
| static bool imx_ldb_encoder_mode_fixup(struct drm_encoder *encoder, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| static void imx_ldb_set_clock(struct imx_ldb *ldb, int mux, int chno, |
| unsigned long serial_clk, unsigned long di_clk) |
| { |
| int ret; |
| |
| dev_dbg(ldb->dev, "%s: now: %ld want: %ld\n", __func__, |
| clk_get_rate(ldb->clk_pll[chno]), serial_clk); |
| clk_set_rate(ldb->clk_pll[chno], serial_clk); |
| |
| dev_dbg(ldb->dev, "%s after: %ld\n", __func__, |
| clk_get_rate(ldb->clk_pll[chno])); |
| |
| dev_dbg(ldb->dev, "%s: now: %ld want: %ld\n", __func__, |
| clk_get_rate(ldb->clk[chno]), |
| (long int)di_clk); |
| clk_set_rate(ldb->clk[chno], di_clk); |
| |
| dev_dbg(ldb->dev, "%s after: %ld\n", __func__, |
| clk_get_rate(ldb->clk[chno])); |
| |
| /* set display clock mux to LDB input clock */ |
| ret = clk_set_parent(ldb->clk_sel[mux], ldb->clk[chno]); |
| if (ret) { |
| dev_err(ldb->dev, "unable to set di%d parent clock to ldb_di%d\n", mux, chno); |
| } |
| } |
| |
| static void imx_ldb_encoder_prepare(struct drm_encoder *encoder) |
| { |
| struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); |
| struct imx_ldb *ldb = imx_ldb_ch->ldb; |
| struct drm_display_mode *mode = &encoder->crtc->mode; |
| u32 pixel_fmt; |
| unsigned long serial_clk; |
| unsigned long di_clk = mode->clock * 1000; |
| int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->imx_drm_encoder, |
| encoder->crtc); |
| |
| if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) { |
| /* dual channel LVDS mode */ |
| serial_clk = 3500UL * mode->clock; |
| imx_ldb_set_clock(ldb, mux, 0, serial_clk, di_clk); |
| imx_ldb_set_clock(ldb, mux, 1, serial_clk, di_clk); |
| } else { |
| serial_clk = 7000UL * mode->clock; |
| imx_ldb_set_clock(ldb, mux, imx_ldb_ch->chno, serial_clk, di_clk); |
| } |
| |
| switch (imx_ldb_ch->chno) { |
| case 0: |
| pixel_fmt = (ldb->ldb_ctrl & LDB_DATA_WIDTH_CH0_24) ? |
| V4L2_PIX_FMT_RGB24 : V4L2_PIX_FMT_BGR666; |
| break; |
| case 1: |
| pixel_fmt = (ldb->ldb_ctrl & LDB_DATA_WIDTH_CH1_24) ? |
| V4L2_PIX_FMT_RGB24 : V4L2_PIX_FMT_BGR666; |
| break; |
| default: |
| dev_err(ldb->dev, "unable to config di%d panel format\n", |
| imx_ldb_ch->chno); |
| pixel_fmt = V4L2_PIX_FMT_RGB24; |
| } |
| |
| imx_drm_crtc_panel_format(encoder->crtc, DRM_MODE_ENCODER_LVDS, |
| pixel_fmt); |
| } |
| |
| static void imx_ldb_encoder_commit(struct drm_encoder *encoder) |
| { |
| struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); |
| struct imx_ldb *ldb = imx_ldb_ch->ldb; |
| int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; |
| int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->imx_drm_encoder, |
| encoder->crtc); |
| |
| if (dual) { |
| clk_prepare_enable(ldb->clk[0]); |
| clk_prepare_enable(ldb->clk[1]); |
| } |
| |
| if (imx_ldb_ch == &ldb->channel[0] || dual) { |
| ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; |
| if (mux == 0 || ldb->lvds_mux) |
| ldb->ldb_ctrl |= LDB_CH0_MODE_EN_TO_DI0; |
| else if (mux == 1) |
| ldb->ldb_ctrl |= LDB_CH0_MODE_EN_TO_DI1; |
| } |
| if (imx_ldb_ch == &ldb->channel[1] || dual) { |
| ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; |
| if (mux == 1 || ldb->lvds_mux) |
| ldb->ldb_ctrl |= LDB_CH1_MODE_EN_TO_DI1; |
| else if (mux == 0) |
| ldb->ldb_ctrl |= LDB_CH1_MODE_EN_TO_DI0; |
| } |
| |
| if (ldb->lvds_mux) { |
| const struct bus_mux *lvds_mux = NULL; |
| |
| if (imx_ldb_ch == &ldb->channel[0]) |
| lvds_mux = &ldb->lvds_mux[0]; |
| else if (imx_ldb_ch == &ldb->channel[1]) |
| lvds_mux = &ldb->lvds_mux[1]; |
| |
| regmap_update_bits(ldb->regmap, lvds_mux->reg, lvds_mux->mask, |
| mux << lvds_mux->shift); |
| } |
| |
| regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); |
| } |
| |
| static void imx_ldb_encoder_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); |
| struct imx_ldb *ldb = imx_ldb_ch->ldb; |
| int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; |
| |
| if (mode->clock > 170000) { |
| dev_warn(ldb->dev, |
| "%s: mode exceeds 170 MHz pixel clock\n", __func__); |
| } |
| if (mode->clock > 85000 && !dual) { |
| dev_warn(ldb->dev, |
| "%s: mode exceeds 85 MHz pixel clock\n", __func__); |
| } |
| |
| /* FIXME - assumes straight connections DI0 --> CH0, DI1 --> CH1 */ |
| if (imx_ldb_ch == &ldb->channel[0]) { |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| ldb->ldb_ctrl |= LDB_DI0_VS_POL_ACT_LOW; |
| else if (mode->flags & DRM_MODE_FLAG_PVSYNC) |
| ldb->ldb_ctrl &= ~LDB_DI0_VS_POL_ACT_LOW; |
| } |
| if (imx_ldb_ch == &ldb->channel[1]) { |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| ldb->ldb_ctrl |= LDB_DI1_VS_POL_ACT_LOW; |
| else if (mode->flags & DRM_MODE_FLAG_PVSYNC) |
| ldb->ldb_ctrl &= ~LDB_DI1_VS_POL_ACT_LOW; |
| } |
| } |
| |
| static void imx_ldb_encoder_disable(struct drm_encoder *encoder) |
| { |
| struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); |
| struct imx_ldb *ldb = imx_ldb_ch->ldb; |
| |
| /* |
| * imx_ldb_encoder_disable is called by |
| * drm_helper_disable_unused_functions without |
| * the encoder being enabled before. |
| */ |
| if (imx_ldb_ch == &ldb->channel[0] && |
| (ldb->ldb_ctrl & LDB_CH0_MODE_EN_MASK) == 0) |
| return; |
| else if (imx_ldb_ch == &ldb->channel[1] && |
| (ldb->ldb_ctrl & LDB_CH1_MODE_EN_MASK) == 0) |
| return; |
| |
| if (imx_ldb_ch == &ldb->channel[0]) |
| ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; |
| else if (imx_ldb_ch == &ldb->channel[1]) |
| ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; |
| |
| regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); |
| |
| if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) { |
| clk_disable_unprepare(ldb->clk[0]); |
| clk_disable_unprepare(ldb->clk[1]); |
| } |
| } |
| |
| static void imx_ldb_encoder_destroy(struct drm_encoder *encoder) |
| { |
| /* do not free here */ |
| } |
| |
| static struct drm_connector_funcs imx_ldb_connector_funcs = { |
| .dpms = drm_helper_connector_dpms, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .detect = imx_ldb_connector_detect, |
| .destroy = imx_ldb_connector_destroy, |
| }; |
| |
| static struct drm_connector_helper_funcs imx_ldb_connector_helper_funcs = { |
| .get_modes = imx_ldb_connector_get_modes, |
| .best_encoder = imx_ldb_connector_best_encoder, |
| .mode_valid = imx_ldb_connector_mode_valid, |
| }; |
| |
| static struct drm_encoder_funcs imx_ldb_encoder_funcs = { |
| .destroy = imx_ldb_encoder_destroy, |
| }; |
| |
| static struct drm_encoder_helper_funcs imx_ldb_encoder_helper_funcs = { |
| .dpms = imx_ldb_encoder_dpms, |
| .mode_fixup = imx_ldb_encoder_mode_fixup, |
| .prepare = imx_ldb_encoder_prepare, |
| .commit = imx_ldb_encoder_commit, |
| .mode_set = imx_ldb_encoder_mode_set, |
| .disable = imx_ldb_encoder_disable, |
| }; |
| |
| static int imx_ldb_get_clk(struct imx_ldb *ldb, int chno) |
| { |
| char clkname[16]; |
| |
| sprintf(clkname, "di%d", chno); |
| ldb->clk[chno] = devm_clk_get(ldb->dev, clkname); |
| if (IS_ERR(ldb->clk[chno])) |
| return PTR_ERR(ldb->clk[chno]); |
| |
| sprintf(clkname, "di%d_pll", chno); |
| ldb->clk_pll[chno] = devm_clk_get(ldb->dev, clkname); |
| if (IS_ERR(ldb->clk_pll[chno])) |
| return PTR_ERR(ldb->clk_pll[chno]); |
| |
| return 0; |
| } |
| |
| static int imx_ldb_register(struct imx_ldb_channel *imx_ldb_ch) |
| { |
| int ret; |
| struct imx_ldb *ldb = imx_ldb_ch->ldb; |
| |
| ret = imx_ldb_get_clk(ldb, imx_ldb_ch->chno); |
| if (ret) |
| return ret; |
| if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) { |
| ret |= imx_ldb_get_clk(ldb, 1); |
| if (ret) |
| return ret; |
| } |
| |
| imx_ldb_ch->connector.funcs = &imx_ldb_connector_funcs; |
| imx_ldb_ch->encoder.funcs = &imx_ldb_encoder_funcs; |
| |
| imx_ldb_ch->encoder.encoder_type = DRM_MODE_ENCODER_LVDS; |
| imx_ldb_ch->connector.connector_type = DRM_MODE_CONNECTOR_LVDS; |
| |
| drm_encoder_helper_add(&imx_ldb_ch->encoder, |
| &imx_ldb_encoder_helper_funcs); |
| ret = imx_drm_add_encoder(&imx_ldb_ch->encoder, |
| &imx_ldb_ch->imx_drm_encoder, THIS_MODULE); |
| if (ret) { |
| dev_err(ldb->dev, "adding encoder failed with %d\n", ret); |
| return ret; |
| } |
| |
| drm_connector_helper_add(&imx_ldb_ch->connector, |
| &imx_ldb_connector_helper_funcs); |
| |
| ret = imx_drm_add_connector(&imx_ldb_ch->connector, |
| &imx_ldb_ch->imx_drm_connector, THIS_MODULE); |
| if (ret) { |
| imx_drm_remove_encoder(imx_ldb_ch->imx_drm_encoder); |
| dev_err(ldb->dev, "adding connector failed with %d\n", ret); |
| return ret; |
| } |
| |
| drm_mode_connector_attach_encoder(&imx_ldb_ch->connector, |
| &imx_ldb_ch->encoder); |
| |
| return 0; |
| } |
| |
| enum { |
| LVDS_BIT_MAP_SPWG, |
| LVDS_BIT_MAP_JEIDA |
| }; |
| |
| static const char *imx_ldb_bit_mappings[] = { |
| [LVDS_BIT_MAP_SPWG] = "spwg", |
| [LVDS_BIT_MAP_JEIDA] = "jeida", |
| }; |
| |
| const int of_get_data_mapping(struct device_node *np) |
| { |
| const char *bm; |
| int ret, i; |
| |
| ret = of_property_read_string(np, "fsl,data-mapping", &bm); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < ARRAY_SIZE(imx_ldb_bit_mappings); i++) |
| if (!strcasecmp(bm, imx_ldb_bit_mappings[i])) |
| return i; |
| |
| return -EINVAL; |
| } |
| |
| static struct bus_mux imx6q_lvds_mux[2] = { |
| { |
| .reg = IOMUXC_GPR3, |
| .shift = 6, |
| .mask = IMX6Q_GPR3_LVDS0_MUX_CTL_MASK, |
| }, { |
| .reg = IOMUXC_GPR3, |
| .shift = 8, |
| .mask = IMX6Q_GPR3_LVDS1_MUX_CTL_MASK, |
| } |
| }; |
| |
| /* |
| * For a device declaring compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb", |
| * of_match_device will walk through this list and take the first entry |
| * matching any of its compatible values. Therefore, the more generic |
| * entries (in this case fsl,imx53-ldb) need to be ordered last. |
| */ |
| static const struct of_device_id imx_ldb_dt_ids[] = { |
| { .compatible = "fsl,imx6q-ldb", .data = imx6q_lvds_mux, }, |
| { .compatible = "fsl,imx53-ldb", .data = NULL, }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, imx_ldb_dt_ids); |
| |
| static int imx_ldb_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const struct of_device_id *of_id = |
| of_match_device(of_match_ptr(imx_ldb_dt_ids), |
| &pdev->dev); |
| struct device_node *child; |
| const u8 *edidp; |
| struct imx_ldb *imx_ldb; |
| int datawidth; |
| int mapping; |
| int dual; |
| int ret; |
| int i; |
| |
| imx_ldb = devm_kzalloc(&pdev->dev, sizeof(*imx_ldb), GFP_KERNEL); |
| if (!imx_ldb) |
| return -ENOMEM; |
| |
| imx_ldb->regmap = syscon_regmap_lookup_by_phandle(np, "gpr"); |
| if (IS_ERR(imx_ldb->regmap)) { |
| dev_err(&pdev->dev, "failed to get parent regmap\n"); |
| return PTR_ERR(imx_ldb->regmap); |
| } |
| |
| imx_ldb->dev = &pdev->dev; |
| |
| if (of_id) |
| imx_ldb->lvds_mux = of_id->data; |
| |
| dual = of_property_read_bool(np, "fsl,dual-channel"); |
| if (dual) |
| imx_ldb->ldb_ctrl |= LDB_SPLIT_MODE_EN; |
| |
| /* |
| * There are three diferent possible clock mux configurations: |
| * i.MX53: ipu1_di0_sel, ipu1_di1_sel |
| * i.MX6q: ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel, ipu2_di1_sel |
| * i.MX6dl: ipu1_di0_sel, ipu1_di1_sel, lcdif_sel |
| * Map them all to di0_sel...di3_sel. |
| */ |
| for (i = 0; i < 4; i++) { |
| char clkname[16]; |
| |
| sprintf(clkname, "di%d_sel", i); |
| imx_ldb->clk_sel[i] = devm_clk_get(imx_ldb->dev, clkname); |
| if (IS_ERR(imx_ldb->clk_sel[i])) { |
| ret = PTR_ERR(imx_ldb->clk_sel[i]); |
| imx_ldb->clk_sel[i] = NULL; |
| break; |
| } |
| } |
| if (i == 0) |
| return ret; |
| |
| for_each_child_of_node(np, child) { |
| struct imx_ldb_channel *channel; |
| |
| ret = of_property_read_u32(child, "reg", &i); |
| if (ret || i < 0 || i > 1) |
| return -EINVAL; |
| |
| if (dual && i > 0) { |
| dev_warn(&pdev->dev, "dual-channel mode, ignoring second output\n"); |
| continue; |
| } |
| |
| if (!of_device_is_available(child)) |
| continue; |
| |
| channel = &imx_ldb->channel[i]; |
| channel->ldb = imx_ldb; |
| channel->chno = i; |
| |
| edidp = of_get_property(child, "edid", &channel->edid_len); |
| if (edidp) { |
| channel->edid = kmemdup(edidp, channel->edid_len, |
| GFP_KERNEL); |
| } else { |
| ret = of_get_drm_display_mode(child, &channel->mode, 0); |
| if (!ret) |
| channel->mode_valid = 1; |
| } |
| |
| ret = of_property_read_u32(child, "fsl,data-width", &datawidth); |
| if (ret) |
| datawidth = 0; |
| else if (datawidth != 18 && datawidth != 24) |
| return -EINVAL; |
| |
| mapping = of_get_data_mapping(child); |
| switch (mapping) { |
| case LVDS_BIT_MAP_SPWG: |
| if (datawidth == 24) { |
| if (i == 0 || dual) |
| imx_ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24; |
| if (i == 1 || dual) |
| imx_ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH1_24; |
| } |
| break; |
| case LVDS_BIT_MAP_JEIDA: |
| if (datawidth == 18) { |
| dev_err(&pdev->dev, "JEIDA standard only supported in 24 bit\n"); |
| return -EINVAL; |
| } |
| if (i == 0 || dual) |
| imx_ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24 | LDB_BIT_MAP_CH0_JEIDA; |
| if (i == 1 || dual) |
| imx_ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH1_24 | LDB_BIT_MAP_CH1_JEIDA; |
| break; |
| default: |
| dev_err(&pdev->dev, "data mapping not specified or invalid\n"); |
| return -EINVAL; |
| } |
| |
| ret = imx_ldb_register(channel); |
| if (ret) |
| return ret; |
| |
| imx_drm_encoder_add_possible_crtcs(channel->imx_drm_encoder, child); |
| } |
| |
| platform_set_drvdata(pdev, imx_ldb); |
| |
| return 0; |
| } |
| |
| static int imx_ldb_remove(struct platform_device *pdev) |
| { |
| struct imx_ldb *imx_ldb = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| struct imx_ldb_channel *channel = &imx_ldb->channel[i]; |
| struct drm_connector *connector = &channel->connector; |
| struct drm_encoder *encoder = &channel->encoder; |
| |
| drm_mode_connector_detach_encoder(connector, encoder); |
| |
| imx_drm_remove_connector(channel->imx_drm_connector); |
| imx_drm_remove_encoder(channel->imx_drm_encoder); |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver imx_ldb_driver = { |
| .probe = imx_ldb_probe, |
| .remove = imx_ldb_remove, |
| .driver = { |
| .of_match_table = imx_ldb_dt_ids, |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(imx_ldb_driver); |
| |
| MODULE_DESCRIPTION("i.MX LVDS driver"); |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix"); |
| MODULE_LICENSE("GPL"); |