| *LM87 hwmon sensor. |
| |
| Required properties: |
| - compatible: Should be |
| "ti,lm87" |
| |
| - reg: I2C address |
| |
| optional properties: |
| - has-temp3: This configures pins 18 and 19 to be used as a second |
| remote temperature sensing channel. By default the pins |
| are configured as voltage input pins in0 and in5. |
| |
| - has-in6: When set, pin 5 is configured to be used as voltage input |
| in6. Otherwise the pin is set as FAN1 input. |
| |
| - has-in7: When set, pin 6 is configured to be used as voltage input |
| in7. Otherwise the pin is set as FAN2 input. |
| |
| - vcc-supply: a Phandle for the regulator supplying power, can be |
| configured to measure 5.0V power supply. Default is 3.3V. |
| |
| Example: |
| |
| lm87@2e { |
| compatible = "ti,lm87"; |
| reg = <0x2e>; |
| has-temp3; |
| vcc-supply = <®_5v0>; |
| }; |
