blob: 711de06bb0fcc8b8e7748d5817d2b2c358ed0903 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Lantiq VRX200 and ARX300 PCIe PHY
maintainers:
- Martin Blumenstingl <martin.blumenstingl@googlemail.com>
properties:
"#phy-cells":
const: 1
description: selects the PHY mode as defined in <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
compatible:
enum:
- lantiq,vrx200-pcie-phy
- lantiq,arx300-pcie-phy
reg:
maxItems: 1
clocks:
items:
- description: PHY module clock
- description: PDI register clock
clock-names:
items:
- const: phy
- const: pdi
resets:
items:
- description: exclusive PHY reset line
- description: shared reset line between the PCIe PHY and PCIe controller
reset-names:
items:
- const: phy
- const: pcie
lantiq,rcu:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the RCU syscon
lantiq,rcu-endian-offset:
$ref: /schemas/types.yaml#/definitions/uint32
description: the offset of the endian registers for this PHY instance in the RCU syscon
lantiq,rcu-big-endian-mask:
$ref: /schemas/types.yaml#/definitions/uint32
description: the mask to set the PDI (PHY) registers for this PHY instance to big endian
big-endian:
description: Configures the PDI (PHY) registers in big-endian mode
type: boolean
little-endian:
description: Configures the PDI (PHY) registers in big-endian mode
type: boolean
required:
- "#phy-cells"
- compatible
- reg
- clocks
- clock-names
- resets
- reset-names
- lantiq,rcu
- lantiq,rcu-endian-offset
- lantiq,rcu-big-endian-mask
additionalProperties: false
examples:
- |
pcie0_phy: phy@106800 {
compatible = "lantiq,vrx200-pcie-phy";
reg = <0x106800 0x100>;
lantiq,rcu = <&rcu0>;
lantiq,rcu-endian-offset = <0x4c>;
lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */
big-endian;
clocks = <&pmu 32>, <&pmu 36>;
clock-names = "phy", "pdi";
resets = <&reset0 12 24>, <&reset0 22 22>;
reset-names = "phy", "pcie";
#phy-cells = <1>;
};
...