| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * ECAP PWM driver |
| * |
| * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/ |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pwm.h> |
| #include <linux/of.h> |
| |
| /* ECAP registers and bits definitions */ |
| #define CAP1 0x08 |
| #define CAP2 0x0C |
| #define CAP3 0x10 |
| #define CAP4 0x14 |
| #define ECCTL2 0x2A |
| #define ECCTL2_APWM_POL_LOW BIT(10) |
| #define ECCTL2_APWM_MODE BIT(9) |
| #define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6)) |
| #define ECCTL2_TSCTR_FREERUN BIT(4) |
| |
| struct ecap_context { |
| u32 cap3; |
| u32 cap4; |
| u16 ecctl2; |
| }; |
| |
| struct ecap_pwm_chip { |
| unsigned int clk_rate; |
| void __iomem *mmio_base; |
| struct ecap_context ctx; |
| }; |
| |
| static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip) |
| { |
| return pwmchip_get_drvdata(chip); |
| } |
| |
| /* |
| * period_ns = 10^9 * period_cycles / PWM_CLK_RATE |
| * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE |
| */ |
| static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns, int enabled) |
| { |
| struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); |
| u32 period_cycles, duty_cycles; |
| unsigned long long c; |
| u16 value; |
| |
| c = pc->clk_rate; |
| c = c * period_ns; |
| do_div(c, NSEC_PER_SEC); |
| period_cycles = (u32)c; |
| |
| if (period_cycles < 1) { |
| period_cycles = 1; |
| duty_cycles = 1; |
| } else { |
| c = pc->clk_rate; |
| c = c * duty_ns; |
| do_div(c, NSEC_PER_SEC); |
| duty_cycles = (u32)c; |
| } |
| |
| pm_runtime_get_sync(pwmchip_parent(chip)); |
| |
| value = readw(pc->mmio_base + ECCTL2); |
| |
| /* Configure APWM mode & disable sync option */ |
| value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA; |
| |
| writew(value, pc->mmio_base + ECCTL2); |
| |
| if (!enabled) { |
| /* Update active registers if not running */ |
| writel(duty_cycles, pc->mmio_base + CAP2); |
| writel(period_cycles, pc->mmio_base + CAP1); |
| } else { |
| /* |
| * Update shadow registers to configure period and |
| * compare values. This helps current PWM period to |
| * complete on reconfiguring |
| */ |
| writel(duty_cycles, pc->mmio_base + CAP4); |
| writel(period_cycles, pc->mmio_base + CAP3); |
| } |
| |
| if (!enabled) { |
| value = readw(pc->mmio_base + ECCTL2); |
| /* Disable APWM mode to put APWM output Low */ |
| value &= ~ECCTL2_APWM_MODE; |
| writew(value, pc->mmio_base + ECCTL2); |
| } |
| |
| pm_runtime_put_sync(pwmchip_parent(chip)); |
| |
| return 0; |
| } |
| |
| static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, |
| enum pwm_polarity polarity) |
| { |
| struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); |
| u16 value; |
| |
| pm_runtime_get_sync(pwmchip_parent(chip)); |
| |
| value = readw(pc->mmio_base + ECCTL2); |
| |
| if (polarity == PWM_POLARITY_INVERSED) |
| /* Duty cycle defines LOW period of PWM */ |
| value |= ECCTL2_APWM_POL_LOW; |
| else |
| /* Duty cycle defines HIGH period of PWM */ |
| value &= ~ECCTL2_APWM_POL_LOW; |
| |
| writew(value, pc->mmio_base + ECCTL2); |
| |
| pm_runtime_put_sync(pwmchip_parent(chip)); |
| |
| return 0; |
| } |
| |
| static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); |
| u16 value; |
| |
| /* Leave clock enabled on enabling PWM */ |
| pm_runtime_get_sync(pwmchip_parent(chip)); |
| |
| /* |
| * Enable 'Free run Time stamp counter mode' to start counter |
| * and 'APWM mode' to enable APWM output |
| */ |
| value = readw(pc->mmio_base + ECCTL2); |
| value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE; |
| writew(value, pc->mmio_base + ECCTL2); |
| |
| return 0; |
| } |
| |
| static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); |
| u16 value; |
| |
| /* |
| * Disable 'Free run Time stamp counter mode' to stop counter |
| * and 'APWM mode' to put APWM output to low |
| */ |
| value = readw(pc->mmio_base + ECCTL2); |
| value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE); |
| writew(value, pc->mmio_base + ECCTL2); |
| |
| /* Disable clock on PWM disable */ |
| pm_runtime_put_sync(pwmchip_parent(chip)); |
| } |
| |
| static int ecap_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| int err; |
| int enabled = pwm->state.enabled; |
| |
| if (state->polarity != pwm->state.polarity) { |
| |
| if (enabled) { |
| ecap_pwm_disable(chip, pwm); |
| enabled = false; |
| } |
| |
| err = ecap_pwm_set_polarity(chip, pwm, state->polarity); |
| if (err) |
| return err; |
| } |
| |
| if (!state->enabled) { |
| if (enabled) |
| ecap_pwm_disable(chip, pwm); |
| return 0; |
| } |
| |
| if (state->period > NSEC_PER_SEC) |
| return -ERANGE; |
| |
| err = ecap_pwm_config(chip, pwm, state->duty_cycle, |
| state->period, enabled); |
| if (err) |
| return err; |
| |
| if (!enabled) |
| return ecap_pwm_enable(chip, pwm); |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops ecap_pwm_ops = { |
| .apply = ecap_pwm_apply, |
| }; |
| |
| static const struct of_device_id ecap_of_match[] = { |
| { .compatible = "ti,am3352-ecap" }, |
| { .compatible = "ti,am33xx-ecap" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ecap_of_match); |
| |
| static int ecap_pwm_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct ecap_pwm_chip *pc; |
| struct pwm_chip *chip; |
| struct clk *clk; |
| int ret; |
| |
| chip = devm_pwmchip_alloc(&pdev->dev, 1, sizeof(*pc)); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| pc = to_ecap_pwm_chip(chip); |
| |
| clk = devm_clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(clk)) { |
| if (of_device_is_compatible(np, "ti,am33xx-ecap")) { |
| dev_warn(&pdev->dev, "Binding is obsolete.\n"); |
| clk = devm_clk_get(pdev->dev.parent, "fck"); |
| } |
| } |
| |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "failed to get clock\n"); |
| return PTR_ERR(clk); |
| } |
| |
| pc->clk_rate = clk_get_rate(clk); |
| if (!pc->clk_rate) { |
| dev_err(&pdev->dev, "failed to get clock rate\n"); |
| return -EINVAL; |
| } |
| |
| chip->ops = &ecap_pwm_ops; |
| |
| pc->mmio_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pc->mmio_base)) |
| return PTR_ERR(pc->mmio_base); |
| |
| ret = devm_pwmchip_add(&pdev->dev, chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, chip); |
| pm_runtime_enable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static void ecap_pwm_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| } |
| |
| static void ecap_pwm_save_context(struct pwm_chip *chip) |
| { |
| struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); |
| |
| pm_runtime_get_sync(pwmchip_parent(chip)); |
| pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2); |
| pc->ctx.cap4 = readl(pc->mmio_base + CAP4); |
| pc->ctx.cap3 = readl(pc->mmio_base + CAP3); |
| pm_runtime_put_sync(pwmchip_parent(chip)); |
| } |
| |
| static void ecap_pwm_restore_context(struct pwm_chip *chip) |
| { |
| struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); |
| |
| writel(pc->ctx.cap3, pc->mmio_base + CAP3); |
| writel(pc->ctx.cap4, pc->mmio_base + CAP4); |
| writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2); |
| } |
| |
| static int ecap_pwm_suspend(struct device *dev) |
| { |
| struct pwm_chip *chip = dev_get_drvdata(dev); |
| struct pwm_device *pwm = chip->pwms; |
| |
| ecap_pwm_save_context(chip); |
| |
| /* Disable explicitly if PWM is running */ |
| if (pwm_is_enabled(pwm)) |
| pm_runtime_put_sync(dev); |
| |
| return 0; |
| } |
| |
| static int ecap_pwm_resume(struct device *dev) |
| { |
| struct pwm_chip *chip = dev_get_drvdata(dev); |
| struct pwm_device *pwm = chip->pwms; |
| |
| /* Enable explicitly if PWM was running */ |
| if (pwm_is_enabled(pwm)) |
| pm_runtime_get_sync(dev); |
| |
| ecap_pwm_restore_context(chip); |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume); |
| |
| static struct platform_driver ecap_pwm_driver = { |
| .driver = { |
| .name = "ecap", |
| .of_match_table = ecap_of_match, |
| .pm = pm_ptr(&ecap_pwm_pm_ops), |
| }, |
| .probe = ecap_pwm_probe, |
| .remove_new = ecap_pwm_remove, |
| }; |
| module_platform_driver(ecap_pwm_driver); |
| |
| MODULE_DESCRIPTION("ECAP PWM driver"); |
| MODULE_AUTHOR("Texas Instruments"); |
| MODULE_LICENSE("GPL"); |