| /* |
| * Integrator/AP timer driver |
| * Copyright (C) 2000-2003 Deep Blue Solutions Ltd |
| * Copyright (c) 2014, Linaro Limited |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clocksource.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/clockchips.h> |
| #include <linux/interrupt.h> |
| #include <linux/sched_clock.h> |
| #include <asm/hardware/arm_timer.h> |
| |
| static void __iomem * sched_clk_base; |
| |
| static u64 notrace integrator_read_sched_clock(void) |
| { |
| return -readl(sched_clk_base + TIMER_VALUE); |
| } |
| |
| static void integrator_clocksource_init(unsigned long inrate, |
| void __iomem *base) |
| { |
| u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; |
| unsigned long rate = inrate; |
| |
| if (rate >= 1500000) { |
| rate /= 16; |
| ctrl |= TIMER_CTRL_DIV16; |
| } |
| |
| writel(0xffff, base + TIMER_LOAD); |
| writel(ctrl, base + TIMER_CTRL); |
| |
| clocksource_mmio_init(base + TIMER_VALUE, "timer2", |
| rate, 200, 16, clocksource_mmio_readl_down); |
| |
| sched_clk_base = base; |
| sched_clock_register(integrator_read_sched_clock, 16, rate); |
| } |
| |
| static unsigned long timer_reload; |
| static void __iomem * clkevt_base; |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| /* clear the interrupt */ |
| writel(1, clkevt_base + TIMER_INTCLR); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) |
| { |
| u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; |
| |
| /* Disable timer */ |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| /* Enable the timer and start the periodic tick */ |
| writel(timer_reload, clkevt_base + TIMER_LOAD); |
| ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| /* Leave the timer disabled, .set_next_event will enable it */ |
| ctrl &= ~TIMER_CTRL_PERIODIC; |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| break; |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_RESUME: |
| default: |
| /* Just leave in disabled state */ |
| break; |
| } |
| |
| } |
| |
| static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) |
| { |
| unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); |
| |
| writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); |
| writel(next, clkevt_base + TIMER_LOAD); |
| writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); |
| |
| return 0; |
| } |
| |
| static struct clock_event_device integrator_clockevent = { |
| .name = "timer1", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .set_mode = clkevt_set_mode, |
| .set_next_event = clkevt_set_next_event, |
| .rating = 300, |
| }; |
| |
| static struct irqaction integrator_timer_irq = { |
| .name = "timer", |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = integrator_timer_interrupt, |
| .dev_id = &integrator_clockevent, |
| }; |
| |
| static void integrator_clockevent_init(unsigned long inrate, |
| void __iomem *base, int irq) |
| { |
| unsigned long rate = inrate; |
| unsigned int ctrl = 0; |
| |
| clkevt_base = base; |
| /* Calculate and program a divisor */ |
| if (rate > 0x100000 * HZ) { |
| rate /= 256; |
| ctrl |= TIMER_CTRL_DIV256; |
| } else if (rate > 0x10000 * HZ) { |
| rate /= 16; |
| ctrl |= TIMER_CTRL_DIV16; |
| } |
| timer_reload = rate / HZ; |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| |
| setup_irq(irq, &integrator_timer_irq); |
| clockevents_config_and_register(&integrator_clockevent, |
| rate, |
| 1, |
| 0xffffU); |
| } |
| |
| static void __init integrator_ap_timer_init_of(struct device_node *node) |
| { |
| const char *path; |
| void __iomem *base; |
| int err; |
| int irq; |
| struct clk *clk; |
| unsigned long rate; |
| struct device_node *pri_node; |
| struct device_node *sec_node; |
| |
| base = of_io_request_and_map(node, 0, "integrator-timer"); |
| if (IS_ERR(base)) |
| return; |
| |
| clk = of_clk_get(node, 0); |
| if (IS_ERR(clk)) { |
| pr_err("No clock for %s\n", node->name); |
| return; |
| } |
| clk_prepare_enable(clk); |
| rate = clk_get_rate(clk); |
| writel(0, base + TIMER_CTRL); |
| |
| err = of_property_read_string(of_aliases, |
| "arm,timer-primary", &path); |
| if (WARN_ON(err)) |
| return; |
| pri_node = of_find_node_by_path(path); |
| err = of_property_read_string(of_aliases, |
| "arm,timer-secondary", &path); |
| if (WARN_ON(err)) |
| return; |
| sec_node = of_find_node_by_path(path); |
| |
| if (node == pri_node) { |
| /* The primary timer lacks IRQ, use as clocksource */ |
| integrator_clocksource_init(rate, base); |
| return; |
| } |
| |
| if (node == sec_node) { |
| /* The secondary timer will drive the clock event */ |
| irq = irq_of_parse_and_map(node, 0); |
| integrator_clockevent_init(rate, base, irq); |
| return; |
| } |
| |
| pr_info("Timer @%p unused\n", base); |
| clk_disable_unprepare(clk); |
| } |
| |
| CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer", |
| integrator_ap_timer_init_of); |