blob: 11468d1409f7227fa6ca5ca9e354837192714968 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Sony Xperia Z2 Tablet";
compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "tablet";
aliases {
serial0 = &blsp1_uart2;
serial1 = &blsp2_uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
};
vreg_bl_vddio: lcd-backlight-vddio {
compatible = "regulator-fixed";
regulator-name = "vreg_bl_vddio";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
gpio = <&tlmm 69 0>;
enable-active-high;
vin-supply = <&pm8941_s3>;
startup-delay-us = <70000>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_backlight_en_pin_a>;
};
vreg_vsp: lcd-dcdc-regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_vsp";
regulator-min-microvolt = <5600000>;
regulator-max-microvolt = <5600000>;
gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
};
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
regulator-name = "wl-reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_regulator_pin>;
};
};
&blsp1_uart2 {
status = "okay";
};
&blsp2_i2c2 {
status = "okay";
clock-frequency = <355000>;
synaptics@2c {
compatible = "syna,rmi4-i2c";
reg = <0x2c>;
interrupt-parent = <&tlmm>;
interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
#address-cells = <1>;
#size-cells = <0>;
vdd-supply = <&pm8941_l22>;
vio-supply = <&pm8941_lvs3>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_pin>;
syna,startup-delay-ms = <100>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
};
rmi4-f11@11 {
reg = <0x11>;
syna,sensor-type = <1>;
touchscreen-inverted-x;
};
};
};
&blsp2_i2c5 {
status = "okay";
clock-frequency = <355000>;
lp8566_wled: backlight@2c {
compatible = "ti,lp8556";
reg = <0x2c>;
power-supply = <&vreg_bl_vddio>;
bl-name = "backlight";
dev-ctrl = /bits/ 8 <0x05>;
init-brt = /bits/ 8 <0x3f>;
rom-a0h {
rom-addr = /bits/ 8 <0xa0>;
rom-val = /bits/ 8 <0xff>;
};
rom-a1h {
rom-addr = /bits/ 8 <0xa1>;
rom-val = /bits/ 8 <0x3f>;
};
rom-a2h {
rom-addr = /bits/ 8 <0xa2>;
rom-val = /bits/ 8 <0x20>;
};
rom-a3h {
rom-addr = /bits/ 8 <0xa3>;
rom-val = /bits/ 8 <0x5e>;
};
rom-a4h {
rom-addr = /bits/ 8 <0xa4>;
rom-val = /bits/ 8 <0x02>;
};
rom-a5h {
rom-addr = /bits/ 8 <0xa5>;
rom-val = /bits/ 8 <0x04>;
};
rom-a6h {
rom-addr = /bits/ 8 <0xa6>;
rom-val = /bits/ 8 <0x80>;
};
rom-a7h {
rom-addr = /bits/ 8 <0xa7>;
rom-val = /bits/ 8 <0xf7>;
};
rom-a9h {
rom-addr = /bits/ 8 <0xa9>;
rom-val = /bits/ 8 <0x80>;
};
rom-aah {
rom-addr = /bits/ 8 <0xaa>;
rom-val = /bits/ 8 <0x0f>;
};
rom-aeh {
rom-addr = /bits/ 8 <0xae>;
rom-val = /bits/ 8 <0x0f>;
};
};
};
&blsp2_uart1 {
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
};
};
&pm8941_coincell {
status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio5";
function = "normal";
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
output-low;
power-source = <PM8941_GPIO_S3>;
};
wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio17";
function = "func2";
output-high;
power-source = <PM8941_GPIO_S3>;
};
wlan_regulator_pin: wl-reg-active-state {
pins = "gpio18";
function = "normal";
bias-disable;
power-source = <PM8941_GPIO_S3>;
};
lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
pins = "gpio20";
function = "normal";
bias-disable;
power-source = <PM8941_GPIO_S3>;
input-disable;
output-low;
};
};
&pm8941_lpg {
status = "okay";
qcom,power-source = <1>;
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@5 {
reg = <5>;
color = <LED_COLOR_ID_BLUE>;
};
led@6 {
reg = <6>;
color = <LED_COLOR_ID_GREEN>;
};
led@7 {
reg = <7>;
color = <LED_COLOR_ID_RED>;
};
};
};
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
};
&remoteproc_mss {
cx-supply = <&pm8841_s2>;
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
};
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s2: s2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s4: s4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
};
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
vdd_l1_l3-supply = <&pm8941_s1>;
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
vdd_l4_l11-supply = <&pm8941_s1>;
vdd_l5_l7-supply = <&pm8941_s2>;
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
vdd_l21-supply = <&vreg_boost>;
pm8941_s1: s1 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
pm8941_s2: s2 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
regulator-boot-on;
};
pm8941_s3: s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-system-load = <154000>;
regulator-always-on;
regulator-boot-on;
};
pm8941_s4: s4 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
pm8941_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
regulator-always-on;
regulator-boot-on;
};
pm8941_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8941_l3: l3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8941_l4: l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8941_l5: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
pm8941_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
pm8941_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8941_l11: l11 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
pm8941_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
pm8941_l13: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
pm8941_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l15: l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8941_l16: l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
pm8941_l17: l17 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
pm8941_l18: l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8941_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8941_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <500000>;
regulator-allow-set-load;
regulator-boot-on;
};
pm8941_l21: l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
pm8941_l22: l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
pm8941_l23: l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
pm8941_l24: l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
regulator-boot-on;
};
pm8941_lvs3: lvs3 {};
};
};
&sdhc_1 {
status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_on>;
pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
status = "okay";
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
};
&sdhc_3 {
status = "okay";
max-frequency = <100000000>;
vmmc-supply = <&vreg_wlan>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdc3_on>;
#address-cells = <1>;
#size-cells = <0>;
bcrmf@1 {
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
reg = <1>;
brcm,drive-strength = <10>;
pinctrl-names = "default";
pinctrl-0 = <&wlan_sleep_clk_pin>;
};
};
&smbb {
qcom,fast-charge-safe-current = <1500000>;
qcom,fast-charge-current-limit = <1500000>;
qcom,dc-current-limit = <1800000>;
usb-charge-current-limit = <1800000>;
qcom,fast-charge-safe-voltage = <4400000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
};
&tlmm {
lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
pins = "gpio69";
function = "gpio";
drive-strength = <10>;
output-low;
bias-disable;
};
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <6>;
bias-disable;
};
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
cd-pins {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
sdc3_on: sdc3-on-state {
clk-pins {
pins = "gpio40";
function = "sdc3";
drive-strength = <10>;
bias-disable;
};
cmd-pins {
pins = "gpio39";
function = "sdc3";
drive-strength = <10>;
bias-pull-up;
};
data-pins {
pins = "gpio35", "gpio36", "gpio37", "gpio38";
function = "sdc3";
drive-strength = <10>;
bias-pull-up;
};
};
ts_int_pin: ts-int-pin-state {
pins = "gpio86";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
bt_host_wake_pin: bt-host-wake-state {
pins = "gpio95";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
bt_dev_wake_pin: bt-dev-wake-state {
pins = "gpio96";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
&usb {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
};
&usb_hs1_phy {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};