| ChromeOS Embedded Controller |
| |
| Google's ChromeOS EC is a Cortex-M device which talks to the AP and |
| implements various function such as keyboard and battery charging. |
| |
| The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the |
| compatible string used depends on the interface. Each connection method has |
| its own driver which connects to the top level interface-agnostic EC driver. |
| Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to |
| the top-level driver. |
| |
| Required properties (I2C): |
| - compatible: "google,cros-ec-i2c" |
| - reg: I2C slave address |
| |
| Required properties (SPI): |
| - compatible: "google,cros-ec-spi" |
| - reg: SPI chip select |
| |
| Required properties (RPMSG): |
| - compatible: "google,cros-ec-rpmsg" |
| |
| Optional properties (SPI): |
| - google,cros-ec-spi-pre-delay: Some implementations of the EC need a little |
| time to wake up from sleep before they can receive SPI transfers at a high |
| clock rate. This property specifies the delay, in usecs, between the |
| assertion of the CS to the start of the first clock pulse. |
| - google,cros-ec-spi-msg-delay: Some implementations of the EC require some |
| additional processing time in order to accept new transactions. If the delay |
| between transactions is not long enough the EC may not be able to respond |
| properly to subsequent transactions and cause them to hang. This property |
| specifies the delay, in usecs, introduced between transactions to account |
| for the time required by the EC to get back into a state in which new data |
| can be accepted. |
| |
| Required properties (LPC): |
| - compatible: "google,cros-ec-lpc" |
| - reg: List of (IO address, size) pairs defining the interface uses |
| |
| Optional properties (all): |
| - google,has-vbc-nvram: Some implementations of the EC include a small |
| nvram space used to store verified boot context data. This boolean flag |
| is used to specify whether this nvram is present or not. |
| |
| Example for I2C: |
| |
| i2c@12ca0000 { |
| cros-ec@1e { |
| reg = <0x1e>; |
| compatible = "google,cros-ec-i2c"; |
| interrupts = <14 0>; |
| interrupt-parent = <&wakeup_eint>; |
| wakeup-source; |
| }; |
| |
| |
| Example for SPI: |
| |
| spi@131b0000 { |
| ec@0 { |
| compatible = "google,cros-ec-spi"; |
| reg = <0x0>; |
| interrupts = <14 0>; |
| interrupt-parent = <&wakeup_eint>; |
| wakeup-source; |
| spi-max-frequency = <5000000>; |
| controller-data { |
| cs-gpio = <&gpf0 3 4 3 0>; |
| samsung,spi-cs; |
| samsung,spi-feedback-delay = <2>; |
| }; |
| }; |
| }; |
| |
| |
| Example for LPC is not supplied as it is not yet implemented. |
