| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org> |
| * IBM Corp. |
| * |
| * Derived from arch/ppc/mm/init.c: |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) |
| * and Cort Dougan (PReP) (cort@cs.nmt.edu) |
| * Copyright (C) 1996 Paul Mackerras |
| * |
| * Derived from "arch/i386/mm/init.c" |
| * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/pagemap.h> |
| #include <linux/memblock.h> |
| |
| #include <asm/pgalloc.h> |
| #include <asm/tlbflush.h> |
| #include <asm/tlb.h> |
| #include <asm/code-patching.h> |
| #include <asm/cputhreads.h> |
| |
| #include <mm/mmu_decl.h> |
| |
| /* The variables below are currently only used on 64-bit Book3E |
| * though this will probably be made common with other nohash |
| * implementations at some point |
| */ |
| static int mmu_pte_psize; /* Page size used for PTE pages */ |
| int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ |
| int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */ |
| unsigned long linear_map_top; /* Top of linear mapping */ |
| |
| |
| /* |
| * Number of bytes to add to SPRN_SPRG_TLB_EXFRAME on crit/mcheck/debug |
| * exceptions. This is used for bolted and e6500 TLB miss handlers which |
| * do not modify this SPRG in the TLB miss code; for other TLB miss handlers, |
| * this is set to zero. |
| */ |
| int extlb_level_exc; |
| |
| /* |
| * Handling of virtual linear page tables or indirect TLB entries |
| * flushing when PTE pages are freed |
| */ |
| void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) |
| { |
| int tsize = mmu_psize_defs[mmu_pte_psize].shift - 10; |
| |
| if (book3e_htw_mode != PPC_HTW_NONE) { |
| unsigned long start = address & PMD_MASK; |
| unsigned long end = address + PMD_SIZE; |
| unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; |
| |
| /* This isn't the most optimal, ideally we would factor out the |
| * while preempt & CPU mask mucking around, or even the IPI but |
| * it will do for now |
| */ |
| while (start < end) { |
| __flush_tlb_page(tlb->mm, start, tsize, 1); |
| start += size; |
| } |
| } else { |
| unsigned long rmask = 0xf000000000000000ul; |
| unsigned long rid = (address & rmask) | 0x1000000000000000ul; |
| unsigned long vpte = address & ~rmask; |
| |
| vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful; |
| vpte |= rid; |
| __flush_tlb_page(tlb->mm, vpte, tsize, 0); |
| } |
| } |
| |
| static void __init setup_page_sizes(void) |
| { |
| unsigned int tlb0cfg; |
| unsigned int eptcfg; |
| int psize; |
| |
| unsigned int mmucfg = mfspr(SPRN_MMUCFG); |
| |
| if ((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { |
| unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG); |
| unsigned int min_pg, max_pg; |
| |
| min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT; |
| max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT; |
| |
| for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { |
| struct mmu_psize_def *def; |
| unsigned int shift; |
| |
| def = &mmu_psize_defs[psize]; |
| shift = def->shift; |
| |
| if (shift == 0 || shift & 1) |
| continue; |
| |
| /* adjust to be in terms of 4^shift Kb */ |
| shift = (shift - 10) >> 1; |
| |
| if ((shift >= min_pg) && (shift <= max_pg)) |
| def->flags |= MMU_PAGE_SIZE_DIRECT; |
| } |
| |
| goto out; |
| } |
| |
| if ((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) { |
| u32 tlb1cfg, tlb1ps; |
| |
| tlb0cfg = mfspr(SPRN_TLB0CFG); |
| tlb1cfg = mfspr(SPRN_TLB1CFG); |
| tlb1ps = mfspr(SPRN_TLB1PS); |
| eptcfg = mfspr(SPRN_EPTCFG); |
| |
| if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) |
| book3e_htw_mode = PPC_HTW_E6500; |
| |
| /* |
| * We expect 4K subpage size and unrestricted indirect size. |
| * The lack of a restriction on indirect size is a Freescale |
| * extension, indicated by PSn = 0 but SPSn != 0. |
| */ |
| if (eptcfg != 2) |
| book3e_htw_mode = PPC_HTW_NONE; |
| |
| for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { |
| struct mmu_psize_def *def = &mmu_psize_defs[psize]; |
| |
| if (!def->shift) |
| continue; |
| |
| if (tlb1ps & (1U << (def->shift - 10))) { |
| def->flags |= MMU_PAGE_SIZE_DIRECT; |
| |
| if (book3e_htw_mode && psize == MMU_PAGE_2M) |
| def->flags |= MMU_PAGE_SIZE_INDIRECT; |
| } |
| } |
| |
| goto out; |
| } |
| out: |
| /* Cleanup array and print summary */ |
| pr_info("MMU: Supported page sizes\n"); |
| for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { |
| struct mmu_psize_def *def = &mmu_psize_defs[psize]; |
| const char *__page_type_names[] = { |
| "unsupported", |
| "direct", |
| "indirect", |
| "direct & indirect" |
| }; |
| if (def->flags == 0) { |
| def->shift = 0; |
| continue; |
| } |
| pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10), |
| __page_type_names[def->flags & 0x3]); |
| } |
| } |
| |
| /* |
| * Early initialization of the MMU TLB code |
| */ |
| static void early_init_this_mmu(void) |
| { |
| unsigned int mas4; |
| |
| /* Set MAS4 based on page table setting */ |
| |
| mas4 = 0x4 << MAS4_WIMGED_SHIFT; |
| switch (book3e_htw_mode) { |
| case PPC_HTW_E6500: |
| mas4 |= MAS4_INDD; |
| mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT; |
| mas4 |= MAS4_TLBSELD(1); |
| mmu_pte_psize = MMU_PAGE_2M; |
| break; |
| |
| case PPC_HTW_NONE: |
| mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; |
| mmu_pte_psize = mmu_virtual_psize; |
| break; |
| } |
| mtspr(SPRN_MAS4, mas4); |
| |
| unsigned int num_cams; |
| bool map = true; |
| |
| /* use a quarter of the TLBCAM for bolted linear map */ |
| num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; |
| |
| /* |
| * Only do the mapping once per core, or else the |
| * transient mapping would cause problems. |
| */ |
| #ifdef CONFIG_SMP |
| if (hweight32(get_tensr()) > 1) |
| map = false; |
| #endif |
| |
| if (map) |
| linear_map_top = map_mem_in_cams(linear_map_top, |
| num_cams, false, true); |
| |
| /* A sync won't hurt us after mucking around with |
| * the MMU configuration |
| */ |
| mb(); |
| } |
| |
| static void __init early_init_mmu_global(void) |
| { |
| /* |
| * Freescale booke only supports 4K pages in TLB0, so use that. |
| */ |
| mmu_vmemmap_psize = MMU_PAGE_4K; |
| |
| /* XXX This code only checks for TLB 0 capabilities and doesn't |
| * check what page size combos are supported by the HW. It |
| * also doesn't handle the case where a separate array holds |
| * the IND entries from the array loaded by the PT. |
| */ |
| /* Look for supported page sizes */ |
| setup_page_sizes(); |
| |
| /* |
| * If we want to use HW tablewalk, enable it by patching the TLB miss |
| * handlers to branch to the one dedicated to it. |
| */ |
| extlb_level_exc = EX_TLB_SIZE; |
| switch (book3e_htw_mode) { |
| case PPC_HTW_E6500: |
| patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e); |
| patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e); |
| break; |
| } |
| |
| pr_info("MMU: Book3E HW tablewalk %s\n", |
| book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported"); |
| |
| /* Set the global containing the top of the linear mapping |
| * for use by the TLB miss code |
| */ |
| linear_map_top = memblock_end_of_DRAM(); |
| |
| ioremap_bot = IOREMAP_BASE; |
| } |
| |
| static void __init early_mmu_set_memory_limit(void) |
| { |
| /* |
| * Limit memory so we dont have linear faults. |
| * Unlike memblock_set_current_limit, which limits |
| * memory available during early boot, this permanently |
| * reduces the memory available to Linux. We need to |
| * do this because highmem is not supported on 64-bit. |
| */ |
| memblock_enforce_memory_limit(linear_map_top); |
| |
| memblock_set_current_limit(linear_map_top); |
| } |
| |
| /* boot cpu only */ |
| void __init early_init_mmu(void) |
| { |
| early_init_mmu_global(); |
| early_init_this_mmu(); |
| early_mmu_set_memory_limit(); |
| } |
| |
| void early_init_mmu_secondary(void) |
| { |
| early_init_this_mmu(); |
| } |
| |
| void setup_initial_memory_limit(phys_addr_t first_memblock_base, |
| phys_addr_t first_memblock_size) |
| { |
| /* |
| * On FSL Embedded 64-bit, usually all RAM is bolted, but with |
| * unusual memory sizes it's possible for some RAM to not be mapped |
| * (such RAM is not used at all by Linux, since we don't support |
| * highmem on 64-bit). We limit ppc64_rma_size to what would be |
| * mappable if this memblock is the only one. Additional memblocks |
| * can only increase, not decrease, the amount that ends up getting |
| * mapped. We still limit max to 1G even if we'll eventually map |
| * more. This is due to what the early init code is set up to do. |
| * |
| * We crop it to the size of the first MEMBLOCK to |
| * avoid going over total available memory just in case... |
| */ |
| unsigned long linear_sz; |
| unsigned int num_cams; |
| |
| /* use a quarter of the TLBCAM for bolted linear map */ |
| num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; |
| |
| linear_sz = map_mem_in_cams(first_memblock_size, num_cams, true, true); |
| ppc64_rma_size = min_t(u64, linear_sz, 0x40000000); |
| |
| /* Finally limit subsequent allocations */ |
| memblock_set_current_limit(first_memblock_base + ppc64_rma_size); |
| } |