| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * TI DaVinci GPIO Support |
| * |
| * Copyright (c) 2006-2007 David Brownell |
| * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> |
| */ |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/spinlock.h> |
| #include <linux/pm_runtime.h> |
| |
| #define MAX_REGS_BANKS 5 |
| #define MAX_INT_PER_BANK 32 |
| |
| struct davinci_gpio_regs { |
| u32 dir; |
| u32 out_data; |
| u32 set_data; |
| u32 clr_data; |
| u32 in_data; |
| u32 set_rising; |
| u32 clr_rising; |
| u32 set_falling; |
| u32 clr_falling; |
| u32 intstat; |
| }; |
| |
| typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq); |
| |
| #define BINTEN 0x8 /* GPIO Interrupt Per-Bank Enable Register */ |
| |
| static void __iomem *gpio_base; |
| static unsigned int offset_array[5] = {0x10, 0x38, 0x60, 0x88, 0xb0}; |
| |
| struct davinci_gpio_irq_data { |
| void __iomem *regs; |
| struct davinci_gpio_controller *chip; |
| int bank_num; |
| }; |
| |
| struct davinci_gpio_controller { |
| struct gpio_chip chip; |
| struct irq_domain *irq_domain; |
| /* Serialize access to GPIO registers */ |
| spinlock_t lock; |
| void __iomem *regs[MAX_REGS_BANKS]; |
| int gpio_unbanked; |
| int irqs[MAX_INT_PER_BANK]; |
| struct davinci_gpio_regs context[MAX_REGS_BANKS]; |
| u32 binten_context; |
| }; |
| |
| static inline u32 __gpio_mask(unsigned gpio) |
| { |
| return 1 << (gpio % 32); |
| } |
| |
| static inline struct davinci_gpio_regs __iomem *irq2regs(struct irq_data *d) |
| { |
| struct davinci_gpio_regs __iomem *g; |
| |
| g = (__force struct davinci_gpio_regs __iomem *)irq_data_get_irq_chip_data(d); |
| |
| return g; |
| } |
| |
| static int davinci_gpio_irq_setup(struct platform_device *pdev); |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* board setup code *MUST* setup pinmux and enable the GPIO clock. */ |
| static inline int __davinci_direction(struct gpio_chip *chip, |
| unsigned offset, bool out, int value) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| struct davinci_gpio_regs __iomem *g; |
| unsigned long flags; |
| u32 temp; |
| int bank = offset / 32; |
| u32 mask = __gpio_mask(offset); |
| |
| g = d->regs[bank]; |
| spin_lock_irqsave(&d->lock, flags); |
| temp = readl_relaxed(&g->dir); |
| if (out) { |
| temp &= ~mask; |
| writel_relaxed(mask, value ? &g->set_data : &g->clr_data); |
| } else { |
| temp |= mask; |
| } |
| writel_relaxed(temp, &g->dir); |
| spin_unlock_irqrestore(&d->lock, flags); |
| |
| return 0; |
| } |
| |
| static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| return __davinci_direction(chip, offset, false, 0); |
| } |
| |
| static int |
| davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| return __davinci_direction(chip, offset, true, value); |
| } |
| |
| /* |
| * Read the pin's value (works even if it's set up as output); |
| * returns zero/nonzero. |
| * |
| * Note that changes are synched to the GPIO clock, so reading values back |
| * right after you've set them may give old values. |
| */ |
| static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| struct davinci_gpio_regs __iomem *g; |
| int bank = offset / 32; |
| |
| g = d->regs[bank]; |
| |
| return !!(__gpio_mask(offset) & readl_relaxed(&g->in_data)); |
| } |
| |
| /* |
| * Assuming the pin is muxed as a gpio output, set its output value. |
| */ |
| static void |
| davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| struct davinci_gpio_regs __iomem *g; |
| int bank = offset / 32; |
| |
| g = d->regs[bank]; |
| |
| writel_relaxed(__gpio_mask(offset), |
| value ? &g->set_data : &g->clr_data); |
| } |
| |
| static int davinci_gpio_probe(struct platform_device *pdev) |
| { |
| int bank, i, ret = 0; |
| unsigned int ngpio, nbank, nirq, gpio_unbanked; |
| struct davinci_gpio_controller *chips; |
| struct device *dev = &pdev->dev; |
| struct device_node *dn = dev_of_node(dev); |
| |
| /* |
| * The gpio banks conceptually expose a segmented bitmap, |
| * and "ngpio" is one more than the largest zero-based |
| * bit index that's valid. |
| */ |
| ret = of_property_read_u32(dn, "ti,ngpio", &ngpio); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get the number of GPIOs\n"); |
| if (ngpio == 0) |
| return dev_err_probe(dev, -EINVAL, "How many GPIOs?\n"); |
| |
| /* |
| * If there are unbanked interrupts then the number of |
| * interrupts is equal to number of gpios else all are banked so |
| * number of interrupts is equal to number of banks(each with 16 gpios) |
| */ |
| ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", |
| &gpio_unbanked); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get the unbanked GPIOs property\n"); |
| |
| if (gpio_unbanked) |
| nirq = gpio_unbanked; |
| else |
| nirq = DIV_ROUND_UP(ngpio, 16); |
| |
| if (nirq > MAX_INT_PER_BANK) { |
| dev_err(dev, "Too many IRQs!\n"); |
| return -EINVAL; |
| } |
| |
| chips = devm_kzalloc(dev, sizeof(*chips), GFP_KERNEL); |
| if (!chips) |
| return -ENOMEM; |
| |
| gpio_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(gpio_base)) |
| return PTR_ERR(gpio_base); |
| |
| for (i = 0; i < nirq; i++) { |
| chips->irqs[i] = platform_get_irq(pdev, i); |
| if (chips->irqs[i] < 0) |
| return chips->irqs[i]; |
| } |
| |
| chips->chip.label = dev_name(dev); |
| |
| chips->chip.direction_input = davinci_direction_in; |
| chips->chip.get = davinci_gpio_get; |
| chips->chip.direction_output = davinci_direction_out; |
| chips->chip.set = davinci_gpio_set; |
| |
| chips->chip.ngpio = ngpio; |
| chips->chip.base = -1; |
| |
| #ifdef CONFIG_OF_GPIO |
| chips->chip.parent = dev; |
| chips->chip.request = gpiochip_generic_request; |
| chips->chip.free = gpiochip_generic_free; |
| #endif |
| spin_lock_init(&chips->lock); |
| |
| chips->gpio_unbanked = gpio_unbanked; |
| |
| nbank = DIV_ROUND_UP(ngpio, 32); |
| for (bank = 0; bank < nbank; bank++) |
| chips->regs[bank] = gpio_base + offset_array[bank]; |
| |
| ret = devm_gpiochip_add_data(dev, &chips->chip, chips); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, chips); |
| ret = davinci_gpio_irq_setup(pdev); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * We expect irqs will normally be set up as input pins, but they can also be |
| * used as output pins ... which is convenient for testing. |
| * |
| * NOTE: The first few GPIOs also have direct INTC hookups in addition |
| * to their GPIOBNK0 irq, with a bit less overhead. |
| * |
| * All those INTC hookups (direct, plus several IRQ banks) can also |
| * serve as EDMA event triggers. |
| */ |
| |
| static void gpio_irq_mask(struct irq_data *d) |
| { |
| struct davinci_gpio_regs __iomem *g = irq2regs(d); |
| uintptr_t mask = (uintptr_t)irq_data_get_irq_handler_data(d); |
| |
| writel_relaxed(mask, &g->clr_falling); |
| writel_relaxed(mask, &g->clr_rising); |
| } |
| |
| static void gpio_irq_unmask(struct irq_data *d) |
| { |
| struct davinci_gpio_regs __iomem *g = irq2regs(d); |
| uintptr_t mask = (uintptr_t)irq_data_get_irq_handler_data(d); |
| unsigned status = irqd_get_trigger_type(d); |
| |
| status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; |
| if (!status) |
| status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; |
| |
| if (status & IRQ_TYPE_EDGE_FALLING) |
| writel_relaxed(mask, &g->set_falling); |
| if (status & IRQ_TYPE_EDGE_RISING) |
| writel_relaxed(mask, &g->set_rising); |
| } |
| |
| static int gpio_irq_type(struct irq_data *d, unsigned trigger) |
| { |
| if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static struct irq_chip gpio_irqchip = { |
| .name = "GPIO", |
| .irq_unmask = gpio_irq_unmask, |
| .irq_mask = gpio_irq_mask, |
| .irq_set_type = gpio_irq_type, |
| .flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_SKIP_SET_WAKE, |
| }; |
| |
| static void gpio_irq_handler(struct irq_desc *desc) |
| { |
| struct davinci_gpio_regs __iomem *g; |
| u32 mask = 0xffff; |
| int bank_num; |
| struct davinci_gpio_controller *d; |
| struct davinci_gpio_irq_data *irqdata; |
| |
| irqdata = (struct davinci_gpio_irq_data *)irq_desc_get_handler_data(desc); |
| bank_num = irqdata->bank_num; |
| g = irqdata->regs; |
| d = irqdata->chip; |
| |
| /* we only care about one bank */ |
| if ((bank_num % 2) == 1) |
| mask <<= 16; |
| |
| /* temporarily mask (level sensitive) parent IRQ */ |
| chained_irq_enter(irq_desc_get_chip(desc), desc); |
| while (1) { |
| u32 status; |
| int bit; |
| irq_hw_number_t hw_irq; |
| |
| /* ack any irqs */ |
| status = readl_relaxed(&g->intstat) & mask; |
| if (!status) |
| break; |
| writel_relaxed(status, &g->intstat); |
| |
| /* now demux them to the right lowlevel handler */ |
| |
| while (status) { |
| bit = __ffs(status); |
| status &= ~BIT(bit); |
| /* Max number of gpios per controller is 144 so |
| * hw_irq will be in [0..143] |
| */ |
| hw_irq = (bank_num / 2) * 32 + bit; |
| |
| generic_handle_domain_irq(d->irq_domain, hw_irq); |
| } |
| } |
| chained_irq_exit(irq_desc_get_chip(desc), desc); |
| /* now it may re-trigger */ |
| } |
| |
| static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| |
| if (d->irq_domain) |
| return irq_create_mapping(d->irq_domain, offset); |
| else |
| return -ENXIO; |
| } |
| |
| static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| |
| /* |
| * NOTE: we assume for now that only irqs in the first gpio_chip |
| * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). |
| */ |
| if (offset < d->gpio_unbanked) |
| return d->irqs[offset]; |
| else |
| return -ENODEV; |
| } |
| |
| static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) |
| { |
| struct davinci_gpio_controller *d; |
| struct davinci_gpio_regs __iomem *g; |
| u32 mask, i; |
| |
| d = (struct davinci_gpio_controller *)irq_data_get_irq_handler_data(data); |
| g = (struct davinci_gpio_regs __iomem *)d->regs[0]; |
| for (i = 0; i < MAX_INT_PER_BANK; i++) |
| if (data->irq == d->irqs[i]) |
| break; |
| |
| if (i == MAX_INT_PER_BANK) |
| return -EINVAL; |
| |
| mask = __gpio_mask(i); |
| |
| if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) |
| return -EINVAL; |
| |
| writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_FALLING) |
| ? &g->set_falling : &g->clr_falling); |
| writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_RISING) |
| ? &g->set_rising : &g->clr_rising); |
| |
| return 0; |
| } |
| |
| static int |
| davinci_gpio_irq_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hw) |
| { |
| struct davinci_gpio_controller *chips = |
| (struct davinci_gpio_controller *)d->host_data; |
| struct davinci_gpio_regs __iomem *g = chips->regs[hw / 32]; |
| |
| irq_set_chip_and_handler_name(irq, &gpio_irqchip, handle_simple_irq, |
| "davinci_gpio"); |
| irq_set_irq_type(irq, IRQ_TYPE_NONE); |
| irq_set_chip_data(irq, (__force void *)g); |
| irq_set_handler_data(irq, (void *)(uintptr_t)__gpio_mask(hw)); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops davinci_gpio_irq_ops = { |
| .map = davinci_gpio_irq_map, |
| .xlate = irq_domain_xlate_onetwocell, |
| }; |
| |
| static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq) |
| { |
| static struct irq_chip_type gpio_unbanked; |
| |
| gpio_unbanked = *irq_data_get_chip_type(irq_get_irq_data(irq)); |
| |
| return &gpio_unbanked.chip; |
| }; |
| |
| static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq) |
| { |
| static struct irq_chip gpio_unbanked; |
| |
| gpio_unbanked = *irq_get_chip(irq); |
| return &gpio_unbanked; |
| }; |
| |
| static const struct of_device_id davinci_gpio_ids[]; |
| |
| /* |
| * NOTE: for suspend/resume, probably best to make a platform_device with |
| * suspend_late/resume_resume calls hooking into results of the set_wake() |
| * calls ... so if no gpios are wakeup events the clock can be disabled, |
| * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 |
| * (dm6446) can be set appropriately for GPIOV33 pins. |
| */ |
| |
| static int davinci_gpio_irq_setup(struct platform_device *pdev) |
| { |
| unsigned gpio, bank; |
| int irq; |
| struct clk *clk; |
| u32 binten = 0; |
| unsigned ngpio; |
| struct device *dev = &pdev->dev; |
| struct davinci_gpio_controller *chips = platform_get_drvdata(pdev); |
| struct davinci_gpio_regs __iomem *g; |
| struct irq_domain *irq_domain = NULL; |
| struct irq_chip *irq_chip; |
| struct davinci_gpio_irq_data *irqdata; |
| gpio_get_irq_chip_cb_t gpio_get_irq_chip; |
| |
| /* |
| * Use davinci_gpio_get_irq_chip by default to handle non DT cases |
| */ |
| gpio_get_irq_chip = davinci_gpio_get_irq_chip; |
| if (dev->of_node) |
| gpio_get_irq_chip = (gpio_get_irq_chip_cb_t)device_get_match_data(dev); |
| |
| ngpio = chips->chip.ngpio; |
| |
| clk = devm_clk_get_enabled(dev, "gpio"); |
| if (IS_ERR(clk)) { |
| dev_err(dev, "Error %ld getting gpio clock\n", PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| |
| if (!chips->gpio_unbanked) { |
| irq = devm_irq_alloc_descs(dev, -1, 0, ngpio, 0); |
| if (irq < 0) { |
| dev_err(dev, "Couldn't allocate IRQ numbers\n"); |
| return irq; |
| } |
| |
| irq_domain = irq_domain_add_legacy(dev->of_node, ngpio, irq, 0, |
| &davinci_gpio_irq_ops, |
| chips); |
| if (!irq_domain) { |
| dev_err(dev, "Couldn't register an IRQ domain\n"); |
| return -ENODEV; |
| } |
| } |
| |
| /* |
| * Arrange gpiod_to_irq() support, handling either direct IRQs or |
| * banked IRQs. Having GPIOs in the first GPIO bank use direct |
| * IRQs, while the others use banked IRQs, would need some setup |
| * tweaks to recognize hardware which can do that. |
| */ |
| chips->chip.to_irq = gpio_to_irq_banked; |
| chips->irq_domain = irq_domain; |
| |
| /* |
| * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO |
| * controller only handling trigger modes. We currently assume no |
| * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. |
| */ |
| if (chips->gpio_unbanked) { |
| /* pass "bank 0" GPIO IRQs to AINTC */ |
| chips->chip.to_irq = gpio_to_irq_unbanked; |
| |
| binten = GENMASK(chips->gpio_unbanked / 16, 0); |
| |
| /* AINTC handles mask/unmask; GPIO handles triggering */ |
| irq = chips->irqs[0]; |
| irq_chip = gpio_get_irq_chip(irq); |
| irq_chip->name = "GPIO-AINTC"; |
| irq_chip->irq_set_type = gpio_irq_type_unbanked; |
| |
| /* default trigger: both edges */ |
| g = chips->regs[0]; |
| writel_relaxed(~0, &g->set_falling); |
| writel_relaxed(~0, &g->set_rising); |
| |
| /* set the direct IRQs up to use that irqchip */ |
| for (gpio = 0; gpio < chips->gpio_unbanked; gpio++) { |
| irq_set_chip(chips->irqs[gpio], irq_chip); |
| irq_set_handler_data(chips->irqs[gpio], chips); |
| irq_set_status_flags(chips->irqs[gpio], |
| IRQ_TYPE_EDGE_BOTH); |
| } |
| |
| goto done; |
| } |
| |
| /* |
| * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we |
| * then chain through our own handler. |
| */ |
| for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 16) { |
| /* disabled by default, enabled only as needed |
| * There are register sets for 32 GPIOs. 2 banks of 16 |
| * GPIOs are covered by each set of registers hence divide by 2 |
| */ |
| g = chips->regs[bank / 2]; |
| writel_relaxed(~0, &g->clr_falling); |
| writel_relaxed(~0, &g->clr_rising); |
| |
| /* |
| * Each chip handles 32 gpios, and each irq bank consists of 16 |
| * gpio irqs. Pass the irq bank's corresponding controller to |
| * the chained irq handler. |
| */ |
| irqdata = devm_kzalloc(&pdev->dev, |
| sizeof(struct |
| davinci_gpio_irq_data), |
| GFP_KERNEL); |
| if (!irqdata) |
| return -ENOMEM; |
| |
| irqdata->regs = g; |
| irqdata->bank_num = bank; |
| irqdata->chip = chips; |
| |
| irq_set_chained_handler_and_data(chips->irqs[bank], |
| gpio_irq_handler, irqdata); |
| |
| binten |= BIT(bank); |
| } |
| |
| done: |
| /* |
| * BINTEN -- per-bank interrupt enable. genirq would also let these |
| * bits be set/cleared dynamically. |
| */ |
| writel_relaxed(binten, gpio_base + BINTEN); |
| |
| return 0; |
| } |
| |
| static void davinci_gpio_save_context(struct davinci_gpio_controller *chips, |
| u32 nbank) |
| { |
| struct davinci_gpio_regs __iomem *g; |
| struct davinci_gpio_regs *context; |
| u32 bank; |
| void __iomem *base; |
| |
| base = chips->regs[0] - offset_array[0]; |
| chips->binten_context = readl_relaxed(base + BINTEN); |
| |
| for (bank = 0; bank < nbank; bank++) { |
| g = chips->regs[bank]; |
| context = &chips->context[bank]; |
| context->dir = readl_relaxed(&g->dir); |
| context->set_data = readl_relaxed(&g->set_data); |
| context->set_rising = readl_relaxed(&g->set_rising); |
| context->set_falling = readl_relaxed(&g->set_falling); |
| } |
| |
| /* Clear all interrupt status registers */ |
| writel_relaxed(GENMASK(31, 0), &g->intstat); |
| } |
| |
| static void davinci_gpio_restore_context(struct davinci_gpio_controller *chips, |
| u32 nbank) |
| { |
| struct davinci_gpio_regs __iomem *g; |
| struct davinci_gpio_regs *context; |
| u32 bank; |
| void __iomem *base; |
| |
| base = chips->regs[0] - offset_array[0]; |
| |
| if (readl_relaxed(base + BINTEN) != chips->binten_context) |
| writel_relaxed(chips->binten_context, base + BINTEN); |
| |
| for (bank = 0; bank < nbank; bank++) { |
| g = chips->regs[bank]; |
| context = &chips->context[bank]; |
| if (readl_relaxed(&g->dir) != context->dir) |
| writel_relaxed(context->dir, &g->dir); |
| if (readl_relaxed(&g->set_data) != context->set_data) |
| writel_relaxed(context->set_data, &g->set_data); |
| if (readl_relaxed(&g->set_rising) != context->set_rising) |
| writel_relaxed(context->set_rising, &g->set_rising); |
| if (readl_relaxed(&g->set_falling) != context->set_falling) |
| writel_relaxed(context->set_falling, &g->set_falling); |
| } |
| } |
| |
| static int davinci_gpio_suspend(struct device *dev) |
| { |
| struct davinci_gpio_controller *chips = dev_get_drvdata(dev); |
| u32 nbank = DIV_ROUND_UP(chips->chip.ngpio, 32); |
| |
| davinci_gpio_save_context(chips, nbank); |
| |
| return 0; |
| } |
| |
| static int davinci_gpio_resume(struct device *dev) |
| { |
| struct davinci_gpio_controller *chips = dev_get_drvdata(dev); |
| u32 nbank = DIV_ROUND_UP(chips->chip.ngpio, 32); |
| |
| davinci_gpio_restore_context(chips, nbank); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(davinci_gpio_dev_pm_ops, davinci_gpio_suspend, |
| davinci_gpio_resume); |
| |
| static const struct of_device_id davinci_gpio_ids[] = { |
| { .compatible = "ti,keystone-gpio", keystone_gpio_get_irq_chip}, |
| { .compatible = "ti,am654-gpio", keystone_gpio_get_irq_chip}, |
| { .compatible = "ti,dm6441-gpio", davinci_gpio_get_irq_chip}, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, davinci_gpio_ids); |
| |
| static struct platform_driver davinci_gpio_driver = { |
| .probe = davinci_gpio_probe, |
| .driver = { |
| .name = "davinci_gpio", |
| .pm = pm_sleep_ptr(&davinci_gpio_dev_pm_ops), |
| .of_match_table = of_match_ptr(davinci_gpio_ids), |
| }, |
| }; |
| |
| /* |
| * GPIO driver registration needs to be done before machine_init functions |
| * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall. |
| */ |
| static int __init davinci_gpio_drv_reg(void) |
| { |
| return platform_driver_register(&davinci_gpio_driver); |
| } |
| postcore_initcall(davinci_gpio_drv_reg); |
| |
| static void __exit davinci_gpio_exit(void) |
| { |
| platform_driver_unregister(&davinci_gpio_driver); |
| } |
| module_exit(davinci_gpio_exit); |
| |
| MODULE_AUTHOR("Jan Kotas <jank@cadence.com>"); |
| MODULE_DESCRIPTION("DAVINCI GPIO driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:gpio-davinci"); |