| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| |
| #include <drm/drm_atomic_state_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_modeset_helper_vtables.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "ast_drv.h" |
| |
| MODULE_FIRMWARE("ast_dp501_fw.bin"); |
| |
| static void ast_release_firmware(void *data) |
| { |
| struct ast_device *ast = data; |
| |
| release_firmware(ast->dp501_fw); |
| ast->dp501_fw = NULL; |
| } |
| |
| static int ast_load_dp501_microcode(struct drm_device *dev) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| int ret; |
| |
| ret = request_firmware(&ast->dp501_fw, "ast_dp501_fw.bin", dev->dev); |
| if (ret) |
| return ret; |
| |
| return devm_add_action_or_reset(dev->dev, ast_release_firmware, ast); |
| } |
| |
| static void send_ack(struct ast_device *ast) |
| { |
| u8 sendack; |
| sendack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0xff); |
| sendack |= 0x80; |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0x00, sendack); |
| } |
| |
| static void send_nack(struct ast_device *ast) |
| { |
| u8 sendack; |
| sendack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0xff); |
| sendack &= ~0x80; |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0x00, sendack); |
| } |
| |
| static bool wait_ack(struct ast_device *ast) |
| { |
| u8 waitack; |
| u32 retry = 0; |
| do { |
| waitack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff); |
| waitack &= 0x80; |
| udelay(100); |
| } while ((!waitack) && (retry++ < 1000)); |
| |
| if (retry < 1000) |
| return true; |
| else |
| return false; |
| } |
| |
| static bool wait_nack(struct ast_device *ast) |
| { |
| u8 waitack; |
| u32 retry = 0; |
| do { |
| waitack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff); |
| waitack &= 0x80; |
| udelay(100); |
| } while ((waitack) && (retry++ < 1000)); |
| |
| if (retry < 1000) |
| return true; |
| else |
| return false; |
| } |
| |
| static void set_cmd_trigger(struct ast_device *ast) |
| { |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, ~0x40, 0x40); |
| } |
| |
| static void clear_cmd_trigger(struct ast_device *ast) |
| { |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, ~0x40, 0x00); |
| } |
| |
| #if 0 |
| static bool wait_fw_ready(struct ast_device *ast) |
| { |
| u8 waitready; |
| u32 retry = 0; |
| do { |
| waitready = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff); |
| waitready &= 0x40; |
| udelay(100); |
| } while ((!waitready) && (retry++ < 1000)); |
| |
| if (retry < 1000) |
| return true; |
| else |
| return false; |
| } |
| #endif |
| |
| static bool ast_write_cmd(struct drm_device *dev, u8 data) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| int retry = 0; |
| if (wait_nack(ast)) { |
| send_nack(ast); |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, data); |
| send_ack(ast); |
| set_cmd_trigger(ast); |
| do { |
| if (wait_ack(ast)) { |
| clear_cmd_trigger(ast); |
| send_nack(ast); |
| return true; |
| } |
| } while (retry++ < 100); |
| } |
| clear_cmd_trigger(ast); |
| send_nack(ast); |
| return false; |
| } |
| |
| static bool ast_write_data(struct drm_device *dev, u8 data) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| |
| if (wait_nack(ast)) { |
| send_nack(ast); |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, data); |
| send_ack(ast); |
| if (wait_ack(ast)) { |
| send_nack(ast); |
| return true; |
| } |
| } |
| send_nack(ast); |
| return false; |
| } |
| |
| #if 0 |
| static bool ast_read_data(struct drm_device *dev, u8 *data) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| u8 tmp; |
| |
| *data = 0; |
| |
| if (wait_ack(ast) == false) |
| return false; |
| tmp = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd3, 0xff); |
| *data = tmp; |
| if (wait_nack(ast) == false) { |
| send_nack(ast); |
| return false; |
| } |
| send_nack(ast); |
| return true; |
| } |
| |
| static void clear_cmd(struct ast_device *ast) |
| { |
| send_nack(ast); |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, 0x00); |
| } |
| #endif |
| |
| static void ast_set_dp501_video_output(struct drm_device *dev, u8 mode) |
| { |
| ast_write_cmd(dev, 0x40); |
| ast_write_data(dev, mode); |
| |
| msleep(10); |
| } |
| |
| static u32 get_fw_base(struct ast_device *ast) |
| { |
| return ast_mindwm(ast, 0x1e6e2104) & 0x7fffffff; |
| } |
| |
| bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| u32 i, data; |
| u32 boot_address; |
| |
| if (ast->config_mode != ast_use_p2a) |
| return false; |
| |
| data = ast_mindwm(ast, 0x1e6e2100) & 0x01; |
| if (data) { |
| boot_address = get_fw_base(ast); |
| for (i = 0; i < size; i += 4) |
| *(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i); |
| return true; |
| } |
| return false; |
| } |
| |
| static bool ast_launch_m68k(struct drm_device *dev) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| u32 i, data, len = 0; |
| u32 boot_address; |
| u8 *fw_addr = NULL; |
| u8 jreg; |
| |
| if (ast->config_mode != ast_use_p2a) |
| return false; |
| |
| data = ast_mindwm(ast, 0x1e6e2100) & 0x01; |
| if (!data) { |
| |
| if (ast->dp501_fw_addr) { |
| fw_addr = ast->dp501_fw_addr; |
| len = 32*1024; |
| } else { |
| if (!ast->dp501_fw && |
| ast_load_dp501_microcode(dev) < 0) |
| return false; |
| |
| fw_addr = (u8 *)ast->dp501_fw->data; |
| len = ast->dp501_fw->size; |
| } |
| /* Get BootAddress */ |
| ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8); |
| data = ast_mindwm(ast, 0x1e6e0004); |
| switch (data & 0x03) { |
| case 0: |
| boot_address = 0x44000000; |
| break; |
| default: |
| case 1: |
| boot_address = 0x48000000; |
| break; |
| case 2: |
| boot_address = 0x50000000; |
| break; |
| case 3: |
| boot_address = 0x60000000; |
| break; |
| } |
| boot_address -= 0x200000; /* -2MB */ |
| |
| /* copy image to buffer */ |
| for (i = 0; i < len; i += 4) { |
| data = *(u32 *)(fw_addr + i); |
| ast_moutdwm(ast, boot_address + i, data); |
| } |
| |
| /* Init SCU */ |
| ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8); |
| |
| /* Launch FW */ |
| ast_moutdwm(ast, 0x1e6e2104, 0x80000000 + boot_address); |
| ast_moutdwm(ast, 0x1e6e2100, 1); |
| |
| /* Update Scratch */ |
| data = ast_mindwm(ast, 0x1e6e2040) & 0xfffff1ff; /* D[11:9] = 100b: UEFI handling */ |
| data |= 0x800; |
| ast_moutdwm(ast, 0x1e6e2040, data); |
| |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x99, 0xfc); /* D[1:0]: Reserved Video Buffer */ |
| jreg |= 0x02; |
| ast_set_index_reg(ast, AST_IO_VGACRI, 0x99, jreg); |
| } |
| return true; |
| } |
| |
| static bool ast_dp501_is_connected(struct ast_device *ast) |
| { |
| u32 boot_address, offset, data; |
| |
| if (ast->config_mode == ast_use_p2a) { |
| boot_address = get_fw_base(ast); |
| |
| /* validate FW version */ |
| offset = AST_DP501_GBL_VERSION; |
| data = ast_mindwm(ast, boot_address + offset); |
| if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1) |
| return false; |
| |
| /* validate PnP Monitor */ |
| offset = AST_DP501_PNPMONITOR; |
| data = ast_mindwm(ast, boot_address + offset); |
| if (!(data & AST_DP501_PNP_CONNECTED)) |
| return false; |
| } else { |
| if (!ast->dp501_fw_buf) |
| return false; |
| |
| /* dummy read */ |
| offset = 0x0000; |
| data = readl(ast->dp501_fw_buf + offset); |
| |
| /* validate FW version */ |
| offset = AST_DP501_GBL_VERSION; |
| data = readl(ast->dp501_fw_buf + offset); |
| if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1) |
| return false; |
| |
| /* validate PnP Monitor */ |
| offset = AST_DP501_PNPMONITOR; |
| data = readl(ast->dp501_fw_buf + offset); |
| if (!(data & AST_DP501_PNP_CONNECTED)) |
| return false; |
| } |
| return true; |
| } |
| |
| static int ast_dp512_read_edid_block(void *data, u8 *buf, unsigned int block, size_t len) |
| { |
| struct ast_device *ast = data; |
| size_t rdlen = round_up(len, 4); |
| u32 i, boot_address, offset, ediddata; |
| |
| if (block > (512 / EDID_LENGTH)) |
| return -EIO; |
| |
| offset = AST_DP501_EDID_DATA + block * EDID_LENGTH; |
| |
| if (ast->config_mode == ast_use_p2a) { |
| boot_address = get_fw_base(ast); |
| |
| for (i = 0; i < rdlen; i += 4) { |
| ediddata = ast_mindwm(ast, boot_address + offset + i); |
| memcpy(buf, &ediddata, min((len - i), 4)); |
| buf += 4; |
| } |
| } else { |
| for (i = 0; i < rdlen; i += 4) { |
| ediddata = readl(ast->dp501_fw_buf + offset + i); |
| memcpy(buf, &ediddata, min((len - i), 4)); |
| buf += 4; |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool ast_init_dvo(struct drm_device *dev) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| u8 jreg; |
| u32 data; |
| ast_write32(ast, 0xf004, 0x1e6e0000); |
| ast_write32(ast, 0xf000, 0x1); |
| ast_write32(ast, 0x12000, 0x1688a8a8); |
| |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff); |
| if (!(jreg & 0x80)) { |
| /* Init SCU DVO Settings */ |
| data = ast_read32(ast, 0x12008); |
| /* delay phase */ |
| data &= 0xfffff8ff; |
| data |= 0x00000500; |
| ast_write32(ast, 0x12008, data); |
| |
| if (IS_AST_GEN4(ast)) { |
| data = ast_read32(ast, 0x12084); |
| /* multi-pins for DVO single-edge */ |
| data |= 0xfffe0000; |
| ast_write32(ast, 0x12084, data); |
| |
| data = ast_read32(ast, 0x12088); |
| /* multi-pins for DVO single-edge */ |
| data |= 0x000fffff; |
| ast_write32(ast, 0x12088, data); |
| |
| data = ast_read32(ast, 0x12090); |
| /* multi-pins for DVO single-edge */ |
| data &= 0xffffffcf; |
| data |= 0x00000020; |
| ast_write32(ast, 0x12090, data); |
| } else { /* AST GEN5+ */ |
| data = ast_read32(ast, 0x12088); |
| /* multi-pins for DVO single-edge */ |
| data |= 0x30000000; |
| ast_write32(ast, 0x12088, data); |
| |
| data = ast_read32(ast, 0x1208c); |
| /* multi-pins for DVO single-edge */ |
| data |= 0x000000cf; |
| ast_write32(ast, 0x1208c, data); |
| |
| data = ast_read32(ast, 0x120a4); |
| /* multi-pins for DVO single-edge */ |
| data |= 0xffff0000; |
| ast_write32(ast, 0x120a4, data); |
| |
| data = ast_read32(ast, 0x120a8); |
| /* multi-pins for DVO single-edge */ |
| data |= 0x0000000f; |
| ast_write32(ast, 0x120a8, data); |
| |
| data = ast_read32(ast, 0x12094); |
| /* multi-pins for DVO single-edge */ |
| data |= 0x00000002; |
| ast_write32(ast, 0x12094, data); |
| } |
| } |
| |
| /* Force to DVO */ |
| data = ast_read32(ast, 0x1202c); |
| data &= 0xfffbffff; |
| ast_write32(ast, 0x1202c, data); |
| |
| /* Init VGA DVO Settings */ |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xcf, 0x80); |
| return true; |
| } |
| |
| |
| static void ast_init_analog(struct drm_device *dev) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| u32 data; |
| |
| /* |
| * Set DAC source to VGA mode in SCU2C via the P2A |
| * bridge. First configure the P2U to target the SCU |
| * in case it isn't at this stage. |
| */ |
| ast_write32(ast, 0xf004, 0x1e6e0000); |
| ast_write32(ast, 0xf000, 0x1); |
| |
| /* Then unlock the SCU with the magic password */ |
| ast_write32(ast, 0x12000, 0x1688a8a8); |
| ast_write32(ast, 0x12000, 0x1688a8a8); |
| ast_write32(ast, 0x12000, 0x1688a8a8); |
| |
| /* Finally, clear bits [17:16] of SCU2c */ |
| data = ast_read32(ast, 0x1202c); |
| data &= 0xfffcffff; |
| ast_write32(ast, 0, data); |
| |
| /* Disable DVO */ |
| ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xcf, 0x00); |
| } |
| |
| void ast_init_3rdtx(struct drm_device *dev) |
| { |
| struct ast_device *ast = to_ast_device(dev); |
| u8 jreg; |
| |
| if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) { |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff); |
| switch (jreg & 0x0e) { |
| case 0x04: |
| ast_init_dvo(dev); |
| break; |
| case 0x08: |
| ast_launch_m68k(dev); |
| break; |
| case 0x0c: |
| ast_init_dvo(dev); |
| break; |
| default: |
| if (ast->tx_chip_types & BIT(AST_TX_SIL164)) |
| ast_init_dvo(dev); |
| else |
| ast_init_analog(dev); |
| } |
| } |
| } |
| |
| /* |
| * Encoder |
| */ |
| |
| static const struct drm_encoder_funcs ast_dp501_encoder_funcs = { |
| .destroy = drm_encoder_cleanup, |
| }; |
| |
| static void ast_dp501_encoder_helper_atomic_enable(struct drm_encoder *encoder, |
| struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = encoder->dev; |
| |
| ast_set_dp501_video_output(dev, 1); |
| } |
| |
| static void ast_dp501_encoder_helper_atomic_disable(struct drm_encoder *encoder, |
| struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = encoder->dev; |
| |
| ast_set_dp501_video_output(dev, 0); |
| } |
| |
| static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = { |
| .atomic_enable = ast_dp501_encoder_helper_atomic_enable, |
| .atomic_disable = ast_dp501_encoder_helper_atomic_disable, |
| }; |
| |
| /* |
| * Connector |
| */ |
| |
| static int ast_dp501_connector_helper_get_modes(struct drm_connector *connector) |
| { |
| struct ast_connector *ast_connector = to_ast_connector(connector); |
| int count; |
| |
| if (ast_connector->physical_status == connector_status_connected) { |
| struct ast_device *ast = to_ast_device(connector->dev); |
| const struct drm_edid *drm_edid; |
| |
| drm_edid = drm_edid_read_custom(connector, ast_dp512_read_edid_block, ast); |
| drm_edid_connector_update(connector, drm_edid); |
| count = drm_edid_connector_add_modes(connector); |
| drm_edid_free(drm_edid); |
| } else { |
| drm_edid_connector_update(connector, NULL); |
| |
| /* |
| * There's no EDID data without a connected monitor. Set BMC- |
| * compatible modes in this case. The XGA default resolution |
| * should work well for all BMCs. |
| */ |
| count = drm_add_modes_noedid(connector, 4096, 4096); |
| if (count) |
| drm_set_preferred_mode(connector, 1024, 768); |
| } |
| |
| return count; |
| } |
| |
| static int ast_dp501_connector_helper_detect_ctx(struct drm_connector *connector, |
| struct drm_modeset_acquire_ctx *ctx, |
| bool force) |
| { |
| struct ast_connector *ast_connector = to_ast_connector(connector); |
| struct ast_device *ast = to_ast_device(connector->dev); |
| enum drm_connector_status status = connector_status_disconnected; |
| |
| if (ast_dp501_is_connected(ast)) |
| status = connector_status_connected; |
| |
| if (status != ast_connector->physical_status) |
| ++connector->epoch_counter; |
| ast_connector->physical_status = status; |
| |
| return connector_status_connected; |
| } |
| |
| static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs = { |
| .get_modes = ast_dp501_connector_helper_get_modes, |
| .detect_ctx = ast_dp501_connector_helper_detect_ctx, |
| }; |
| |
| static const struct drm_connector_funcs ast_dp501_connector_funcs = { |
| .reset = drm_atomic_helper_connector_reset, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static int ast_dp501_connector_init(struct drm_device *dev, struct drm_connector *connector) |
| { |
| int ret; |
| |
| ret = drm_connector_init(dev, connector, &ast_dp501_connector_funcs, |
| DRM_MODE_CONNECTOR_DisplayPort); |
| if (ret) |
| return ret; |
| |
| drm_connector_helper_add(connector, &ast_dp501_connector_helper_funcs); |
| |
| connector->interlace_allowed = 0; |
| connector->doublescan_allowed = 0; |
| |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; |
| |
| return 0; |
| } |
| |
| int ast_dp501_output_init(struct ast_device *ast) |
| { |
| struct drm_device *dev = &ast->base; |
| struct drm_crtc *crtc = &ast->crtc; |
| struct drm_encoder *encoder = &ast->output.dp501.encoder; |
| struct ast_connector *ast_connector = &ast->output.dp501.connector; |
| struct drm_connector *connector = &ast_connector->base; |
| int ret; |
| |
| ret = drm_encoder_init(dev, encoder, &ast_dp501_encoder_funcs, |
| DRM_MODE_ENCODER_TMDS, NULL); |
| if (ret) |
| return ret; |
| drm_encoder_helper_add(encoder, &ast_dp501_encoder_helper_funcs); |
| |
| encoder->possible_crtcs = drm_crtc_mask(crtc); |
| |
| ret = ast_dp501_connector_init(dev, connector); |
| if (ret) |
| return ret; |
| ast_connector->physical_status = connector->status; |
| |
| ret = drm_connector_attach_encoder(connector, encoder); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |