| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@somainline.org> |
| * |
| * Generated with linux-mdss-dsi-panel-driver-generator with a |
| * substantial amount of manual adjustments. |
| * |
| * SONY Downstream kernel calls this one: |
| * - "JDI ID3" for Akari (XZ2) |
| * - "JDI ID4" for Apollo (XZ2 Compact) |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| enum { |
| TYPE_TAMA_60HZ, |
| /* |
| * Leaving room for expansion - SONY very often uses |
| * *truly reliably* overclockable panels on their flagships! |
| */ |
| }; |
| |
| struct sony_td4353_jdi { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| struct regulator_bulk_data supplies[3]; |
| struct gpio_desc *panel_reset_gpio; |
| struct gpio_desc *touch_reset_gpio; |
| int type; |
| }; |
| |
| static inline struct sony_td4353_jdi *to_sony_td4353_jdi(struct drm_panel *panel) |
| { |
| return container_of(panel, struct sony_td4353_jdi, panel); |
| } |
| |
| static int sony_td4353_jdi_on(struct sony_td4353_jdi *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 1080 - 1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set column address: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 2160 - 1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set page address: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set tear scanline: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set tear on: %d\n", ret); |
| return ret; |
| } |
| |
| mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00); |
| |
| ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set pixel format: %d\n", ret); |
| return ret; |
| } |
| |
| mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PARTIAL_ROWS, |
| 0x00, 0x00, 0x08, 0x6f); |
| |
| ret = mipi_dsi_dcs_exit_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to exit sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(70); |
| |
| mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START); |
| |
| ret = mipi_dsi_dcs_set_display_on(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to turn display on: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sony_td4353_jdi_off(struct sony_td4353_jdi *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_off(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display off: %d\n", ret); |
| return ret; |
| } |
| msleep(22); |
| |
| ret = mipi_dsi_dcs_set_tear_off(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set tear off: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_enter_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enter sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(80); |
| |
| return 0; |
| } |
| |
| static void sony_td4353_assert_reset_gpios(struct sony_td4353_jdi *ctx, int mode) |
| { |
| gpiod_set_value_cansleep(ctx->touch_reset_gpio, mode); |
| gpiod_set_value_cansleep(ctx->panel_reset_gpio, mode); |
| usleep_range(5000, 5100); |
| } |
| |
| static int sony_td4353_jdi_prepare(struct drm_panel *panel) |
| { |
| struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel); |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enable regulators: %d\n", ret); |
| return ret; |
| } |
| |
| msleep(100); |
| |
| sony_td4353_assert_reset_gpios(ctx, 1); |
| |
| ret = sony_td4353_jdi_on(ctx); |
| if (ret < 0) { |
| dev_err(dev, "Failed to power on panel: %d\n", ret); |
| sony_td4353_assert_reset_gpios(ctx, 0); |
| regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sony_td4353_jdi_unprepare(struct drm_panel *panel) |
| { |
| struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel); |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| ret = sony_td4353_jdi_off(ctx); |
| if (ret < 0) |
| dev_err(dev, "Failed to power off panel: %d\n", ret); |
| |
| sony_td4353_assert_reset_gpios(ctx, 0); |
| regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode sony_td4353_jdi_mode_tama_60hz = { |
| .clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000, |
| .hdisplay = 1080, |
| .hsync_start = 1080 + 4, |
| .hsync_end = 1080 + 4 + 8, |
| .htotal = 1080 + 4 + 8 + 8, |
| .vdisplay = 2160, |
| .vsync_start = 2160 + 259, |
| .vsync_end = 2160 + 259 + 8, |
| .vtotal = 2160 + 259 + 8 + 8, |
| .width_mm = 64, |
| .height_mm = 128, |
| }; |
| |
| static int sony_td4353_jdi_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel); |
| struct drm_display_mode *mode = NULL; |
| |
| if (ctx->type == TYPE_TAMA_60HZ) |
| mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_tama_60hz); |
| else |
| return -EINVAL; |
| |
| if (!mode) |
| return -ENOMEM; |
| |
| drm_mode_set_name(mode); |
| |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; |
| connector->display_info.width_mm = mode->width_mm; |
| connector->display_info.height_mm = mode->height_mm; |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs sony_td4353_jdi_panel_funcs = { |
| .prepare = sony_td4353_jdi_prepare, |
| .unprepare = sony_td4353_jdi_unprepare, |
| .get_modes = sony_td4353_jdi_get_modes, |
| }; |
| |
| static int sony_td4353_jdi_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct sony_td4353_jdi *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->type = (uintptr_t)of_device_get_match_data(dev); |
| |
| ctx->supplies[0].supply = "vddio"; |
| ctx->supplies[1].supply = "vsp"; |
| ctx->supplies[2].supply = "vsn"; |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), |
| ctx->supplies); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "Failed to get regulators\n"); |
| |
| ctx->panel_reset_gpio = devm_gpiod_get(dev, "panel-reset", GPIOD_ASIS); |
| if (IS_ERR(ctx->panel_reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(ctx->panel_reset_gpio), |
| "Failed to get panel-reset-gpios\n"); |
| |
| ctx->touch_reset_gpio = devm_gpiod_get(dev, "touch-reset", GPIOD_ASIS); |
| if (IS_ERR(ctx->touch_reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(ctx->touch_reset_gpio), |
| "Failed to get touch-reset-gpios\n"); |
| |
| ctx->dsi = dsi; |
| mipi_dsi_set_drvdata(dsi, ctx); |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS; |
| |
| drm_panel_init(&ctx->panel, dev, &sony_td4353_jdi_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| ret = drm_panel_of_backlight(&ctx->panel); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get backlight\n"); |
| |
| drm_panel_add(&ctx->panel); |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to attach to DSI host: %d\n", ret); |
| drm_panel_remove(&ctx->panel); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void sony_td4353_jdi_remove(struct mipi_dsi_device *dsi) |
| { |
| struct sony_td4353_jdi *ctx = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); |
| |
| drm_panel_remove(&ctx->panel); |
| } |
| |
| static const struct of_device_id sony_td4353_jdi_of_match[] = { |
| { .compatible = "sony,td4353-jdi-tama", .data = (void *)TYPE_TAMA_60HZ }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, sony_td4353_jdi_of_match); |
| |
| static struct mipi_dsi_driver sony_td4353_jdi_driver = { |
| .probe = sony_td4353_jdi_probe, |
| .remove = sony_td4353_jdi_remove, |
| .driver = { |
| .name = "panel-sony-td4353-jdi", |
| .of_match_table = sony_td4353_jdi_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(sony_td4353_jdi_driver); |
| |
| MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@somainline.org>"); |
| MODULE_DESCRIPTION("DRM panel driver for SONY Xperia XZ2/XZ2c JDI panel"); |
| MODULE_LICENSE("GPL"); |