| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016 InforceComputing |
| * Copyright (C) 2016 Linaro Ltd |
| * Copyright (C) 2023 BayLibre, SAS |
| * |
| * Authors: |
| * - Vinay Simha BN <simhavcs@gmail.com> |
| * - Sumit Semwal <sumit.semwal@linaro.org> |
| * - Guillaume La Roque <glaroque@baylibre.com> |
| * |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| #define DSI_REG_MCAP 0xb0 |
| #define DSI_REG_IS 0xb3 /* Interface Setting */ |
| #define DSI_REG_IIS 0xb4 /* Interface ID Setting */ |
| #define DSI_REG_CTRL 0xb6 |
| |
| enum { |
| IOVCC = 0, |
| POWER = 1 |
| }; |
| |
| struct stk_panel { |
| const struct drm_display_mode *mode; |
| struct backlight_device *backlight; |
| struct drm_panel base; |
| struct gpio_desc *enable_gpio; /* Power IC supply enable */ |
| struct gpio_desc *reset_gpio; /* External reset */ |
| struct mipi_dsi_device *dsi; |
| struct regulator_bulk_data supplies[2]; |
| }; |
| |
| static inline struct stk_panel *to_stk_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct stk_panel, base); |
| } |
| |
| static int stk_panel_init(struct stk_panel *stk) |
| { |
| struct mipi_dsi_device *dsi = stk->dsi; |
| struct mipi_dsi_multi_context dsi_ctx = {.dsi = dsi}; |
| |
| mipi_dsi_dcs_soft_reset_multi(&dsi_ctx); |
| mipi_dsi_msleep(&dsi_ctx, 5); |
| mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx); |
| mipi_dsi_msleep(&dsi_ctx, 120); |
| |
| mipi_dsi_generic_write_seq_multi(&dsi_ctx, DSI_REG_MCAP, 0x04); |
| |
| /* Interface setting, video mode */ |
| mipi_dsi_generic_write_seq_multi(&dsi_ctx, DSI_REG_IS, 0x14, 0x08, 0x00, 0x22, 0x00); |
| mipi_dsi_generic_write_seq_multi(&dsi_ctx, DSI_REG_IIS, 0x0c, 0x00); |
| mipi_dsi_generic_write_seq_multi(&dsi_ctx, DSI_REG_CTRL, 0x3a, 0xd3); |
| |
| mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x77); |
| |
| mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, |
| MIPI_DCS_WRITE_MEMORY_START); |
| |
| mipi_dsi_dcs_set_pixel_format_multi(&dsi_ctx, 0x77); |
| mipi_dsi_dcs_set_column_address_multi(&dsi_ctx, 0, stk->mode->hdisplay - 1); |
| mipi_dsi_dcs_set_page_address_multi(&dsi_ctx, 0, stk->mode->vdisplay - 1); |
| |
| return dsi_ctx.accum_err; |
| } |
| |
| static int stk_panel_on(struct stk_panel *stk) |
| { |
| struct mipi_dsi_device *dsi = stk->dsi; |
| struct mipi_dsi_multi_context dsi_ctx = {.dsi = dsi}; |
| |
| mipi_dsi_dcs_set_display_on_multi(&dsi_ctx); |
| |
| mipi_dsi_msleep(&dsi_ctx, 20); |
| |
| return dsi_ctx.accum_err; |
| } |
| |
| static void stk_panel_off(struct stk_panel *stk) |
| { |
| struct mipi_dsi_device *dsi = stk->dsi; |
| struct mipi_dsi_multi_context dsi_ctx = {.dsi = dsi}; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| mipi_dsi_dcs_set_display_off_multi(&dsi_ctx); |
| mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); |
| |
| mipi_dsi_msleep(&dsi_ctx, 100); |
| } |
| |
| static int stk_panel_unprepare(struct drm_panel *panel) |
| { |
| struct stk_panel *stk = to_stk_panel(panel); |
| |
| stk_panel_off(stk); |
| regulator_bulk_disable(ARRAY_SIZE(stk->supplies), stk->supplies); |
| gpiod_set_value(stk->reset_gpio, 0); |
| gpiod_set_value(stk->enable_gpio, 1); |
| |
| return 0; |
| } |
| |
| static int stk_panel_prepare(struct drm_panel *panel) |
| { |
| struct stk_panel *stk = to_stk_panel(panel); |
| int ret; |
| |
| gpiod_set_value(stk->reset_gpio, 0); |
| gpiod_set_value(stk->enable_gpio, 0); |
| ret = regulator_enable(stk->supplies[IOVCC].consumer); |
| if (ret < 0) |
| return ret; |
| |
| mdelay(8); |
| ret = regulator_enable(stk->supplies[POWER].consumer); |
| if (ret < 0) |
| goto iovccoff; |
| |
| mdelay(20); |
| gpiod_set_value(stk->enable_gpio, 1); |
| mdelay(20); |
| gpiod_set_value(stk->reset_gpio, 1); |
| mdelay(10); |
| ret = stk_panel_init(stk); |
| if (ret < 0) |
| goto poweroff; |
| |
| ret = stk_panel_on(stk); |
| if (ret < 0) |
| goto poweroff; |
| |
| return 0; |
| |
| poweroff: |
| regulator_disable(stk->supplies[POWER].consumer); |
| iovccoff: |
| regulator_disable(stk->supplies[IOVCC].consumer); |
| gpiod_set_value(stk->reset_gpio, 0); |
| gpiod_set_value(stk->enable_gpio, 0); |
| |
| return ret; |
| } |
| |
| static const struct drm_display_mode default_mode = { |
| .clock = 163204, |
| .hdisplay = 1200, |
| .hsync_start = 1200 + 144, |
| .hsync_end = 1200 + 144 + 16, |
| .htotal = 1200 + 144 + 16 + 45, |
| .vdisplay = 1920, |
| .vsync_start = 1920 + 8, |
| .vsync_end = 1920 + 8 + 4, |
| .vtotal = 1920 + 8 + 4 + 4, |
| .width_mm = 95, |
| .height_mm = 151, |
| }; |
| |
| static int stk_panel_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &default_mode); |
| if (!mode) { |
| dev_err(panel->dev, "failed to add mode %ux%ux@%u\n", |
| default_mode.hdisplay, default_mode.vdisplay, |
| drm_mode_vrefresh(&default_mode)); |
| return -ENOMEM; |
| } |
| |
| drm_mode_set_name(mode); |
| drm_mode_probed_add(connector, mode); |
| connector->display_info.width_mm = default_mode.width_mm; |
| connector->display_info.height_mm = default_mode.height_mm; |
| return 1; |
| } |
| |
| static int dsi_dcs_bl_get_brightness(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| int ret; |
| u16 brightness; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness); |
| if (ret < 0) |
| return ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| return brightness & 0xff; |
| } |
| |
| static int dsi_dcs_bl_update_status(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| struct mipi_dsi_multi_context dsi_ctx = {.dsi = dsi}; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, bl->props.brightness); |
| if (dsi_ctx.accum_err) |
| return dsi_ctx.accum_err; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| return dsi_ctx.accum_err; |
| } |
| |
| static const struct backlight_ops dsi_bl_ops = { |
| .update_status = dsi_dcs_bl_update_status, |
| .get_brightness = dsi_dcs_bl_get_brightness, |
| }; |
| |
| static struct backlight_device * |
| drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct backlight_properties props = { |
| .type = BACKLIGHT_RAW, |
| .brightness = 255, |
| .max_brightness = 255, |
| }; |
| |
| return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, |
| &dsi_bl_ops, &props); |
| } |
| |
| static const struct drm_panel_funcs stk_panel_funcs = { |
| .unprepare = stk_panel_unprepare, |
| .prepare = stk_panel_prepare, |
| .get_modes = stk_panel_get_modes, |
| }; |
| |
| static const struct of_device_id stk_of_match[] = { |
| { .compatible = "startek,kd070fhfid015", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, stk_of_match); |
| |
| static int stk_panel_add(struct stk_panel *stk) |
| { |
| struct device *dev = &stk->dsi->dev; |
| int ret; |
| |
| stk->mode = &default_mode; |
| |
| stk->supplies[IOVCC].supply = "iovcc"; |
| stk->supplies[POWER].supply = "power"; |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(stk->supplies), stk->supplies); |
| if (ret) { |
| dev_err(dev, "regulator_bulk failed\n"); |
| return ret; |
| } |
| |
| stk->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(stk->reset_gpio)) { |
| ret = PTR_ERR(stk->reset_gpio); |
| dev_err(dev, "cannot get reset-gpios %d\n", ret); |
| return ret; |
| } |
| |
| stk->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(stk->enable_gpio)) { |
| ret = PTR_ERR(stk->enable_gpio); |
| dev_err(dev, "cannot get enable-gpio %d\n", ret); |
| return ret; |
| } |
| |
| stk->backlight = drm_panel_create_dsi_backlight(stk->dsi); |
| if (IS_ERR(stk->backlight)) { |
| ret = PTR_ERR(stk->backlight); |
| dev_err(dev, "failed to register backlight %d\n", ret); |
| return ret; |
| } |
| |
| drm_panel_init(&stk->base, &stk->dsi->dev, &stk_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| drm_panel_add(&stk->base); |
| |
| return 0; |
| } |
| |
| static int stk_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| struct stk_panel *stk; |
| int ret; |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM); |
| |
| stk = devm_kzalloc(&dsi->dev, sizeof(*stk), GFP_KERNEL); |
| if (!stk) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, stk); |
| |
| stk->dsi = dsi; |
| |
| ret = stk_panel_add(stk); |
| if (ret < 0) |
| return ret; |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) |
| drm_panel_remove(&stk->base); |
| |
| return 0; |
| } |
| |
| static void stk_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct stk_panel *stk = mipi_dsi_get_drvdata(dsi); |
| int err; |
| |
| err = mipi_dsi_detach(dsi); |
| if (err < 0) |
| dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", |
| err); |
| |
| drm_panel_remove(&stk->base); |
| } |
| |
| static struct mipi_dsi_driver stk_panel_driver = { |
| .driver = { |
| .name = "panel-startek-kd070fhfid015", |
| .of_match_table = stk_of_match, |
| }, |
| .probe = stk_panel_probe, |
| .remove = stk_panel_remove, |
| }; |
| module_mipi_dsi_driver(stk_panel_driver); |
| |
| MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>"); |
| MODULE_DESCRIPTION("STARTEK KD070FHFID015"); |
| MODULE_LICENSE("GPL"); |