| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * AD7766/AD7767 SPI ADC driver |
| * |
| * Copyright 2016 Analog Devices Inc. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| |
| struct ad7766_chip_info { |
| unsigned int decimation_factor; |
| }; |
| |
| enum { |
| AD7766_SUPPLY_AVDD = 0, |
| AD7766_SUPPLY_DVDD = 1, |
| AD7766_SUPPLY_VREF = 2, |
| AD7766_NUM_SUPPLIES = 3 |
| }; |
| |
| struct ad7766 { |
| const struct ad7766_chip_info *chip_info; |
| struct spi_device *spi; |
| struct clk *mclk; |
| struct gpio_desc *pd_gpio; |
| struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES]; |
| |
| struct iio_trigger *trig; |
| |
| struct spi_transfer xfer; |
| struct spi_message msg; |
| |
| /* |
| * DMA (thus cache coherency maintenance) may require the |
| * transfer buffers to live in their own cache lines. |
| * Make the buffer large enough for one 24 bit sample and one 64 bit |
| * aligned 64 bit timestamp. |
| */ |
| unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)] __aligned(IIO_DMA_MINALIGN); |
| }; |
| |
| /* |
| * AD7766 and AD7767 variations are interface compatible, the main difference is |
| * analog performance. Both parts will use the same ID. |
| */ |
| enum ad7766_device_ids { |
| ID_AD7766, |
| ID_AD7766_1, |
| ID_AD7766_2, |
| }; |
| |
| static irqreturn_t ad7766_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct ad7766 *ad7766 = iio_priv(indio_dev); |
| int ret; |
| |
| ret = spi_sync(ad7766->spi, &ad7766->msg); |
| if (ret < 0) |
| goto done; |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data, |
| pf->timestamp); |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ad7766_preenable(struct iio_dev *indio_dev) |
| { |
| struct ad7766 *ad7766 = iio_priv(indio_dev); |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg); |
| if (ret < 0) { |
| dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(ad7766->mclk); |
| if (ret < 0) { |
| dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret); |
| regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); |
| return ret; |
| } |
| |
| gpiod_set_value(ad7766->pd_gpio, 0); |
| |
| return 0; |
| } |
| |
| static int ad7766_postdisable(struct iio_dev *indio_dev) |
| { |
| struct ad7766 *ad7766 = iio_priv(indio_dev); |
| |
| gpiod_set_value(ad7766->pd_gpio, 1); |
| |
| /* |
| * The PD pin is synchronous to the clock, so give it some time to |
| * notice the change before we disable the clock. |
| */ |
| msleep(20); |
| |
| clk_disable_unprepare(ad7766->mclk); |
| regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); |
| |
| return 0; |
| } |
| |
| static int ad7766_read_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *val, int *val2, long info) |
| { |
| struct ad7766 *ad7766 = iio_priv(indio_dev); |
| struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer; |
| int scale_uv; |
| |
| switch (info) { |
| case IIO_CHAN_INFO_SCALE: |
| scale_uv = regulator_get_voltage(vref); |
| if (scale_uv < 0) |
| return scale_uv; |
| *val = scale_uv / 1000; |
| *val2 = chan->scan_type.realbits; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *val = clk_get_rate(ad7766->mclk) / |
| ad7766->chip_info->decimation_factor; |
| return IIO_VAL_INT; |
| } |
| return -EINVAL; |
| } |
| |
| static const struct iio_chan_spec ad7766_channels[] = { |
| { |
| .type = IIO_VOLTAGE, |
| .indexed = 1, |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .scan_type = { |
| .sign = 's', |
| .realbits = 24, |
| .storagebits = 32, |
| .endianness = IIO_BE, |
| }, |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(1), |
| }; |
| |
| static const struct ad7766_chip_info ad7766_chip_info[] = { |
| [ID_AD7766] = { |
| .decimation_factor = 8, |
| }, |
| [ID_AD7766_1] = { |
| .decimation_factor = 16, |
| }, |
| [ID_AD7766_2] = { |
| .decimation_factor = 32, |
| }, |
| }; |
| |
| static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = { |
| .preenable = &ad7766_preenable, |
| .postdisable = &ad7766_postdisable, |
| }; |
| |
| static const struct iio_info ad7766_info = { |
| .read_raw = &ad7766_read_raw, |
| }; |
| |
| static irqreturn_t ad7766_irq(int irq, void *private) |
| { |
| iio_trigger_poll(private); |
| return IRQ_HANDLED; |
| } |
| |
| static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable) |
| { |
| struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig); |
| |
| if (enable) |
| enable_irq(ad7766->spi->irq); |
| else |
| disable_irq(ad7766->spi->irq); |
| |
| return 0; |
| } |
| |
| static const struct iio_trigger_ops ad7766_trigger_ops = { |
| .set_trigger_state = ad7766_set_trigger_state, |
| .validate_device = iio_trigger_validate_own_device, |
| }; |
| |
| static int ad7766_probe(struct spi_device *spi) |
| { |
| const struct spi_device_id *id = spi_get_device_id(spi); |
| struct iio_dev *indio_dev; |
| struct ad7766 *ad7766; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| ad7766 = iio_priv(indio_dev); |
| ad7766->chip_info = &ad7766_chip_info[id->driver_data]; |
| |
| ad7766->mclk = devm_clk_get(&spi->dev, "mclk"); |
| if (IS_ERR(ad7766->mclk)) |
| return PTR_ERR(ad7766->mclk); |
| |
| ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd"; |
| ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd"; |
| ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref"; |
| |
| ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg), |
| ad7766->reg); |
| if (ret) |
| return ret; |
| |
| ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(ad7766->pd_gpio)) |
| return PTR_ERR(ad7766->pd_gpio); |
| |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = ad7766_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ad7766_channels); |
| indio_dev->info = &ad7766_info; |
| |
| if (spi->irq > 0) { |
| ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", |
| indio_dev->name, |
| iio_device_id(indio_dev)); |
| if (!ad7766->trig) |
| return -ENOMEM; |
| |
| ad7766->trig->ops = &ad7766_trigger_ops; |
| iio_trigger_set_drvdata(ad7766->trig, ad7766); |
| |
| /* |
| * The device generates interrupts as long as it is powered up. |
| * Some platforms might not allow the option to power it down so |
| * don't enable the interrupt to avoid extra load on the system |
| */ |
| ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq, |
| IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN, |
| dev_name(&spi->dev), |
| ad7766->trig); |
| if (ret < 0) |
| return ret; |
| |
| ret = devm_iio_trigger_register(&spi->dev, ad7766->trig); |
| if (ret) |
| return ret; |
| } |
| |
| ad7766->spi = spi; |
| |
| /* First byte always 0 */ |
| ad7766->xfer.rx_buf = &ad7766->data[1]; |
| ad7766->xfer.len = 3; |
| |
| spi_message_init(&ad7766->msg); |
| spi_message_add_tail(&ad7766->xfer, &ad7766->msg); |
| |
| ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, |
| &iio_pollfunc_store_time, &ad7766_trigger_handler, |
| &ad7766_buffer_setup_ops); |
| if (ret) |
| return ret; |
| |
| return devm_iio_device_register(&spi->dev, indio_dev); |
| } |
| |
| static const struct spi_device_id ad7766_id[] = { |
| { "ad7766", ID_AD7766 }, |
| { "ad7766-1", ID_AD7766_1 }, |
| { "ad7766-2", ID_AD7766_2 }, |
| { "ad7767", ID_AD7766 }, |
| { "ad7767-1", ID_AD7766_1 }, |
| { "ad7767-2", ID_AD7766_2 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, ad7766_id); |
| |
| static struct spi_driver ad7766_driver = { |
| .driver = { |
| .name = "ad7766", |
| }, |
| .probe = ad7766_probe, |
| .id_table = ad7766_id, |
| }; |
| module_spi_driver(ad7766_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support"); |
| MODULE_LICENSE("GPL v2"); |