| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2024 ROHM Semiconductors |
| * |
| * ROHM BD96801 PMIC driver |
| * |
| * This version of the "BD86801 scalable PMIC"'s driver supports only very |
| * basic set of the PMIC features. Most notably, there is no support for |
| * the ERRB interrupt and the configurations which should be done when the |
| * PMIC is in STBY mode. |
| * |
| * Supporting the ERRB interrupt would require dropping the regmap-IRQ |
| * usage or working around (or accepting a presense of) a naming conflict |
| * in debugFS IRQs. |
| * |
| * Being able to reliably do the configurations like changing the |
| * regulator safety limits (like limits for the over/under -voltages, over |
| * current, thermal protection) would require the configuring driver to be |
| * synchronized with entity causing the PMIC state transitions. Eg, one |
| * should be able to ensure the PMIC is in STBY state when the |
| * configurations are applied to the hardware. How and when the PMIC state |
| * transitions are to be done is likely to be very system specific, as will |
| * be the need to configure these safety limits. Hence it's not simple to |
| * come up with a generic solution. |
| * |
| * Users who require the ERRB handling and STBY state configurations can |
| * have a look at the original RFC: |
| * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@gmail.com/ |
| * which implements a workaround to debugFS naming conflict and some of |
| * the safety limit configurations - but leaves the state change handling |
| * and synchronization to be implemented. |
| * |
| * It would be great to hear (and receive a patch!) if you implement the |
| * STBY configuration support or a proper fix to the debugFS naming |
| * conflict in your downstream driver ;) |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| |
| #include <linux/mfd/rohm-bd96801.h> |
| #include <linux/mfd/rohm-generic.h> |
| |
| static const struct resource regulator_intb_irqs[] = { |
| DEFINE_RES_IRQ_NAMED(BD96801_TW_STAT, "bd96801-core-thermal"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPH_STAT, "bd96801-buck1-overcurr-h"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPL_STAT, "bd96801-buck1-overcurr-l"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPN_STAT, "bd96801-buck1-overcurr-n"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OVD_STAT, "bd96801-buck1-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_UVD_STAT, "bd96801-buck1-undervolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_TW_CH_STAT, "bd96801-buck1-thermal"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPH_STAT, "bd96801-buck2-overcurr-h"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPL_STAT, "bd96801-buck2-overcurr-l"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPN_STAT, "bd96801-buck2-overcurr-n"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OVD_STAT, "bd96801-buck2-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_UVD_STAT, "bd96801-buck2-undervolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_TW_CH_STAT, "bd96801-buck2-thermal"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPH_STAT, "bd96801-buck3-overcurr-h"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPL_STAT, "bd96801-buck3-overcurr-l"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPN_STAT, "bd96801-buck3-overcurr-n"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OVD_STAT, "bd96801-buck3-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_UVD_STAT, "bd96801-buck3-undervolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_TW_CH_STAT, "bd96801-buck3-thermal"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPH_STAT, "bd96801-buck4-overcurr-h"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPL_STAT, "bd96801-buck4-overcurr-l"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPN_STAT, "bd96801-buck4-overcurr-n"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OVD_STAT, "bd96801-buck4-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_UVD_STAT, "bd96801-buck4-undervolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_TW_CH_STAT, "bd96801-buck4-thermal"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OCPH_STAT, "bd96801-ldo5-overcurr"), |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVD_STAT, "bd96801-ldo5-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVD_STAT, "bd96801-ldo5-undervolt"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OCPH_STAT, "bd96801-ldo6-overcurr"), |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OVD_STAT, "bd96801-ldo6-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO6_UVD_STAT, "bd96801-ldo6-undervolt"), |
| |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OCPH_STAT, "bd96801-ldo7-overcurr"), |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OVD_STAT, "bd96801-ldo7-overvolt"), |
| DEFINE_RES_IRQ_NAMED(BD96801_LDO7_UVD_STAT, "bd96801-ldo7-undervolt"), |
| }; |
| |
| static const struct resource wdg_intb_irqs[] = { |
| DEFINE_RES_IRQ_NAMED(BD96801_WDT_ERR_STAT, "bd96801-wdg"), |
| }; |
| |
| static struct mfd_cell bd96801_cells[] = { |
| { |
| .name = "bd96801-wdt", |
| .resources = wdg_intb_irqs, |
| .num_resources = ARRAY_SIZE(wdg_intb_irqs), |
| }, { |
| .name = "bd96801-regulator", |
| .resources = regulator_intb_irqs, |
| .num_resources = ARRAY_SIZE(regulator_intb_irqs), |
| }, |
| }; |
| |
| static const struct regmap_range bd96801_volatile_ranges[] = { |
| /* Status registers */ |
| regmap_reg_range(BD96801_REG_WD_FEED, BD96801_REG_WD_FAILCOUNT), |
| regmap_reg_range(BD96801_REG_WD_ASK, BD96801_REG_WD_ASK), |
| regmap_reg_range(BD96801_REG_WD_STATUS, BD96801_REG_WD_STATUS), |
| regmap_reg_range(BD96801_REG_PMIC_STATE, BD96801_REG_INT_LDO7_INTB), |
| /* Registers which do not update value unless PMIC is in STBY */ |
| regmap_reg_range(BD96801_REG_SSCG_CTRL, BD96801_REG_SHD_INTB), |
| regmap_reg_range(BD96801_REG_BUCK_OVP, BD96801_REG_BOOT_OVERTIME), |
| /* |
| * LDO control registers have single bit (LDO MODE) which does not |
| * change when we write it unless PMIC is in STBY. It's safer to not |
| * cache it. |
| */ |
| regmap_reg_range(BD96801_LDO5_VOL_LVL_REG, BD96801_LDO7_VOL_LVL_REG), |
| }; |
| |
| static const struct regmap_access_table volatile_regs = { |
| .yes_ranges = bd96801_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(bd96801_volatile_ranges), |
| }; |
| |
| static const struct regmap_irq bd96801_intb_irqs[] = { |
| /* STATUS SYSTEM INTB */ |
| REGMAP_IRQ_REG(BD96801_TW_STAT, 0, BD96801_TW_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_WDT_ERR_STAT, 0, BD96801_WDT_ERR_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_I2C_ERR_STAT, 0, BD96801_I2C_ERR_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_CHIP_IF_ERR_STAT, 0, BD96801_CHIP_IF_ERR_STAT_MASK), |
| /* STATUS BUCK1 INTB */ |
| REGMAP_IRQ_REG(BD96801_BUCK1_OCPH_STAT, 1, BD96801_BUCK_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK1_OCPL_STAT, 1, BD96801_BUCK_OCPL_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK1_OCPN_STAT, 1, BD96801_BUCK_OCPN_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK1_OVD_STAT, 1, BD96801_BUCK_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK1_UVD_STAT, 1, BD96801_BUCK_UVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK1_TW_CH_STAT, 1, BD96801_BUCK_TW_CH_STAT_MASK), |
| /* BUCK 2 INTB */ |
| REGMAP_IRQ_REG(BD96801_BUCK2_OCPH_STAT, 2, BD96801_BUCK_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK2_OCPL_STAT, 2, BD96801_BUCK_OCPL_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK2_OCPN_STAT, 2, BD96801_BUCK_OCPN_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK2_OVD_STAT, 2, BD96801_BUCK_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK2_UVD_STAT, 2, BD96801_BUCK_UVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK2_TW_CH_STAT, 2, BD96801_BUCK_TW_CH_STAT_MASK), |
| /* BUCK 3 INTB */ |
| REGMAP_IRQ_REG(BD96801_BUCK3_OCPH_STAT, 3, BD96801_BUCK_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK3_OCPL_STAT, 3, BD96801_BUCK_OCPL_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK3_OCPN_STAT, 3, BD96801_BUCK_OCPN_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK3_OVD_STAT, 3, BD96801_BUCK_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK3_UVD_STAT, 3, BD96801_BUCK_UVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK3_TW_CH_STAT, 3, BD96801_BUCK_TW_CH_STAT_MASK), |
| /* BUCK 4 INTB */ |
| REGMAP_IRQ_REG(BD96801_BUCK4_OCPH_STAT, 4, BD96801_BUCK_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK4_OCPL_STAT, 4, BD96801_BUCK_OCPL_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK4_OCPN_STAT, 4, BD96801_BUCK_OCPN_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK4_OVD_STAT, 4, BD96801_BUCK_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK4_UVD_STAT, 4, BD96801_BUCK_UVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_BUCK4_TW_CH_STAT, 4, BD96801_BUCK_TW_CH_STAT_MASK), |
| /* LDO5 INTB */ |
| REGMAP_IRQ_REG(BD96801_LDO5_OCPH_STAT, 5, BD96801_LDO_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_LDO5_OVD_STAT, 5, BD96801_LDO_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_LDO5_UVD_STAT, 5, BD96801_LDO_UVD_STAT_MASK), |
| /* LDO6 INTB */ |
| REGMAP_IRQ_REG(BD96801_LDO6_OCPH_STAT, 6, BD96801_LDO_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_LDO6_OVD_STAT, 6, BD96801_LDO_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_LDO6_UVD_STAT, 6, BD96801_LDO_UVD_STAT_MASK), |
| /* LDO7 INTB */ |
| REGMAP_IRQ_REG(BD96801_LDO7_OCPH_STAT, 7, BD96801_LDO_OCPH_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_LDO7_OVD_STAT, 7, BD96801_LDO_OVD_STAT_MASK), |
| REGMAP_IRQ_REG(BD96801_LDO7_UVD_STAT, 7, BD96801_LDO_UVD_STAT_MASK), |
| }; |
| |
| static struct regmap_irq_chip bd96801_irq_chip_intb = { |
| .name = "bd96801-irq-intb", |
| .main_status = BD96801_REG_INT_MAIN, |
| .num_main_regs = 1, |
| .irqs = &bd96801_intb_irqs[0], |
| .num_irqs = ARRAY_SIZE(bd96801_intb_irqs), |
| .status_base = BD96801_REG_INT_SYS_INTB, |
| .mask_base = BD96801_REG_MASK_SYS_INTB, |
| .ack_base = BD96801_REG_INT_SYS_INTB, |
| .init_ack_masked = true, |
| .num_regs = 8, |
| .irq_reg_stride = 1, |
| }; |
| |
| static const struct regmap_config bd96801_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_table = &volatile_regs, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int bd96801_i2c_probe(struct i2c_client *i2c) |
| { |
| struct regmap_irq_chip_data *intb_irq_data; |
| const struct fwnode_handle *fwnode; |
| struct irq_domain *intb_domain; |
| struct regmap *regmap; |
| int ret, intb_irq; |
| |
| fwnode = dev_fwnode(&i2c->dev); |
| if (!fwnode) |
| return dev_err_probe(&i2c->dev, -EINVAL, "Failed to find fwnode\n"); |
| |
| intb_irq = fwnode_irq_get_byname(fwnode, "intb"); |
| if (intb_irq < 0) |
| return dev_err_probe(&i2c->dev, intb_irq, "INTB IRQ not configured\n"); |
| |
| regmap = devm_regmap_init_i2c(i2c, &bd96801_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(regmap), |
| "Regmap initialization failed\n"); |
| |
| ret = regmap_write(regmap, BD96801_LOCK_REG, BD96801_UNLOCK); |
| if (ret) |
| return dev_err_probe(&i2c->dev, ret, "Failed to unlock PMIC\n"); |
| |
| ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, intb_irq, |
| IRQF_ONESHOT, 0, &bd96801_irq_chip_intb, |
| &intb_irq_data); |
| if (ret) |
| return dev_err_probe(&i2c->dev, ret, "Failed to add INTB IRQ chip\n"); |
| |
| intb_domain = regmap_irq_get_domain(intb_irq_data); |
| |
| ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, |
| bd96801_cells, |
| ARRAY_SIZE(bd96801_cells), NULL, 0, |
| intb_domain); |
| if (ret) |
| dev_err(&i2c->dev, "Failed to create subdevices\n"); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id bd96801_of_match[] = { |
| { .compatible = "rohm,bd96801", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, bd96801_of_match); |
| |
| static struct i2c_driver bd96801_i2c_driver = { |
| .driver = { |
| .name = "rohm-bd96801", |
| .of_match_table = bd96801_of_match, |
| }, |
| .probe = bd96801_i2c_probe, |
| }; |
| |
| static int __init bd96801_i2c_init(void) |
| { |
| return i2c_add_driver(&bd96801_i2c_driver); |
| } |
| |
| /* Initialise early so consumer devices can complete system boot */ |
| subsys_initcall(bd96801_i2c_init); |
| |
| static void __exit bd96801_i2c_exit(void) |
| { |
| i2c_del_driver(&bd96801_i2c_driver); |
| } |
| module_exit(bd96801_i2c_exit); |
| |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| MODULE_DESCRIPTION("ROHM BD96801 Power Management IC driver"); |
| MODULE_LICENSE("GPL"); |