| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (C) 2023 Intel Corporation */ |
| |
| #include "idpf.h" |
| |
| /** |
| * idpf_get_rxnfc - command to get RX flow classification rules |
| * @netdev: network interface device structure |
| * @cmd: ethtool rxnfc command |
| * @rule_locs: pointer to store rule locations |
| * |
| * Returns Success if the command is supported. |
| */ |
| static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, |
| u32 __always_unused *rule_locs) |
| { |
| struct idpf_vport *vport; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| switch (cmd->cmd) { |
| case ETHTOOL_GRXRINGS: |
| cmd->data = vport->num_rxq; |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return 0; |
| default: |
| break; |
| } |
| |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| /** |
| * idpf_get_rxfh_key_size - get the RSS hash key size |
| * @netdev: network interface device structure |
| * |
| * Returns the key size on success, error value on failure. |
| */ |
| static u32 idpf_get_rxfh_key_size(struct net_device *netdev) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_user_config_data *user_config; |
| |
| if (!idpf_is_cap_ena_all(np->adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) |
| return -EOPNOTSUPP; |
| |
| user_config = &np->adapter->vport_config[np->vport_idx]->user_config; |
| |
| return user_config->rss_data.rss_key_size; |
| } |
| |
| /** |
| * idpf_get_rxfh_indir_size - get the rx flow hash indirection table size |
| * @netdev: network interface device structure |
| * |
| * Returns the table size on success, error value on failure. |
| */ |
| static u32 idpf_get_rxfh_indir_size(struct net_device *netdev) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_user_config_data *user_config; |
| |
| if (!idpf_is_cap_ena_all(np->adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) |
| return -EOPNOTSUPP; |
| |
| user_config = &np->adapter->vport_config[np->vport_idx]->user_config; |
| |
| return user_config->rss_data.rss_lut_size; |
| } |
| |
| /** |
| * idpf_get_rxfh - get the rx flow hash indirection table |
| * @netdev: network interface device structure |
| * @rxfh: pointer to param struct (indir, key, hfunc) |
| * |
| * Reads the indirection table directly from the hardware. Always returns 0. |
| */ |
| static int idpf_get_rxfh(struct net_device *netdev, |
| struct ethtool_rxfh_param *rxfh) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_rss_data *rss_data; |
| struct idpf_adapter *adapter; |
| int err = 0; |
| u16 i; |
| |
| idpf_vport_ctrl_lock(netdev); |
| |
| adapter = np->adapter; |
| |
| if (!idpf_is_cap_ena_all(adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) { |
| err = -EOPNOTSUPP; |
| goto unlock_mutex; |
| } |
| |
| rss_data = &adapter->vport_config[np->vport_idx]->user_config.rss_data; |
| if (np->state != __IDPF_VPORT_UP) |
| goto unlock_mutex; |
| |
| rxfh->hfunc = ETH_RSS_HASH_TOP; |
| |
| if (rxfh->key) |
| memcpy(rxfh->key, rss_data->rss_key, rss_data->rss_key_size); |
| |
| if (rxfh->indir) { |
| for (i = 0; i < rss_data->rss_lut_size; i++) |
| rxfh->indir[i] = rss_data->rss_lut[i]; |
| } |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_set_rxfh - set the rx flow hash indirection table |
| * @netdev: network interface device structure |
| * @rxfh: pointer to param struct (indir, key, hfunc) |
| * @extack: extended ACK from the Netlink message |
| * |
| * Returns -EINVAL if the table specifies an invalid queue id, otherwise |
| * returns 0 after programming the table. |
| */ |
| static int idpf_set_rxfh(struct net_device *netdev, |
| struct ethtool_rxfh_param *rxfh, |
| struct netlink_ext_ack *extack) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_rss_data *rss_data; |
| struct idpf_adapter *adapter; |
| struct idpf_vport *vport; |
| int err = 0; |
| u16 lut; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| adapter = vport->adapter; |
| |
| if (!idpf_is_cap_ena_all(adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) { |
| err = -EOPNOTSUPP; |
| goto unlock_mutex; |
| } |
| |
| rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data; |
| if (np->state != __IDPF_VPORT_UP) |
| goto unlock_mutex; |
| |
| if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE && |
| rxfh->hfunc != ETH_RSS_HASH_TOP) { |
| err = -EOPNOTSUPP; |
| goto unlock_mutex; |
| } |
| |
| if (rxfh->key) |
| memcpy(rss_data->rss_key, rxfh->key, rss_data->rss_key_size); |
| |
| if (rxfh->indir) { |
| for (lut = 0; lut < rss_data->rss_lut_size; lut++) |
| rss_data->rss_lut[lut] = rxfh->indir[lut]; |
| } |
| |
| err = idpf_config_rss(vport); |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_get_channels: get the number of channels supported by the device |
| * @netdev: network interface device structure |
| * @ch: channel information structure |
| * |
| * Report maximum of TX and RX. Report one extra channel to match our MailBox |
| * Queue. |
| */ |
| static void idpf_get_channels(struct net_device *netdev, |
| struct ethtool_channels *ch) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_config *vport_config; |
| u16 num_txq, num_rxq; |
| u16 combined; |
| |
| vport_config = np->adapter->vport_config[np->vport_idx]; |
| |
| num_txq = vport_config->user_config.num_req_tx_qs; |
| num_rxq = vport_config->user_config.num_req_rx_qs; |
| |
| combined = min(num_txq, num_rxq); |
| |
| /* Report maximum channels */ |
| ch->max_combined = min_t(u16, vport_config->max_q.max_txq, |
| vport_config->max_q.max_rxq); |
| ch->max_rx = vport_config->max_q.max_rxq; |
| ch->max_tx = vport_config->max_q.max_txq; |
| |
| ch->max_other = IDPF_MAX_MBXQ; |
| ch->other_count = IDPF_MAX_MBXQ; |
| |
| ch->combined_count = combined; |
| ch->rx_count = num_rxq - combined; |
| ch->tx_count = num_txq - combined; |
| } |
| |
| /** |
| * idpf_set_channels: set the new channel count |
| * @netdev: network interface device structure |
| * @ch: channel information structure |
| * |
| * Negotiate a new number of channels with CP. Returns 0 on success, negative |
| * on failure. |
| */ |
| static int idpf_set_channels(struct net_device *netdev, |
| struct ethtool_channels *ch) |
| { |
| struct idpf_vport_config *vport_config; |
| unsigned int num_req_tx_q; |
| unsigned int num_req_rx_q; |
| struct idpf_vport *vport; |
| u16 num_txq, num_rxq; |
| struct device *dev; |
| int err = 0; |
| u16 idx; |
| |
| if (ch->rx_count && ch->tx_count) { |
| netdev_err(netdev, "Dedicated RX or TX channels cannot be used simultaneously\n"); |
| return -EINVAL; |
| } |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| idx = vport->idx; |
| vport_config = vport->adapter->vport_config[idx]; |
| |
| num_txq = vport_config->user_config.num_req_tx_qs; |
| num_rxq = vport_config->user_config.num_req_rx_qs; |
| |
| num_req_tx_q = ch->combined_count + ch->tx_count; |
| num_req_rx_q = ch->combined_count + ch->rx_count; |
| |
| dev = &vport->adapter->pdev->dev; |
| /* It's possible to specify number of queues that exceeds max. |
| * Stack checks max combined_count and max [tx|rx]_count but not the |
| * max combined_count + [tx|rx]_count. These checks should catch that. |
| */ |
| if (num_req_tx_q > vport_config->max_q.max_txq) { |
| dev_info(dev, "Maximum TX queues is %d\n", |
| vport_config->max_q.max_txq); |
| err = -EINVAL; |
| goto unlock_mutex; |
| } |
| if (num_req_rx_q > vport_config->max_q.max_rxq) { |
| dev_info(dev, "Maximum RX queues is %d\n", |
| vport_config->max_q.max_rxq); |
| err = -EINVAL; |
| goto unlock_mutex; |
| } |
| |
| if (num_req_tx_q == num_txq && num_req_rx_q == num_rxq) |
| goto unlock_mutex; |
| |
| vport_config->user_config.num_req_tx_qs = num_req_tx_q; |
| vport_config->user_config.num_req_rx_qs = num_req_rx_q; |
| |
| err = idpf_initiate_soft_reset(vport, IDPF_SR_Q_CHANGE); |
| if (err) { |
| /* roll back queue change */ |
| vport_config->user_config.num_req_tx_qs = num_txq; |
| vport_config->user_config.num_req_rx_qs = num_rxq; |
| } |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_get_ringparam - Get ring parameters |
| * @netdev: network interface device structure |
| * @ring: ethtool ringparam structure |
| * @kring: unused |
| * @ext_ack: unused |
| * |
| * Returns current ring parameters. TX and RX rings are reported separately, |
| * but the number of rings is not reported. |
| */ |
| static void idpf_get_ringparam(struct net_device *netdev, |
| struct ethtool_ringparam *ring, |
| struct kernel_ethtool_ringparam *kring, |
| struct netlink_ext_ack *ext_ack) |
| { |
| struct idpf_vport *vport; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| ring->rx_max_pending = IDPF_MAX_RXQ_DESC; |
| ring->tx_max_pending = IDPF_MAX_TXQ_DESC; |
| ring->rx_pending = vport->rxq_desc_count; |
| ring->tx_pending = vport->txq_desc_count; |
| |
| kring->tcp_data_split = idpf_vport_get_hsplit(vport); |
| |
| idpf_vport_ctrl_unlock(netdev); |
| } |
| |
| /** |
| * idpf_set_ringparam - Set ring parameters |
| * @netdev: network interface device structure |
| * @ring: ethtool ringparam structure |
| * @kring: unused |
| * @ext_ack: unused |
| * |
| * Sets ring parameters. TX and RX rings are controlled separately, but the |
| * number of rings is not specified, so all rings get the same settings. |
| */ |
| static int idpf_set_ringparam(struct net_device *netdev, |
| struct ethtool_ringparam *ring, |
| struct kernel_ethtool_ringparam *kring, |
| struct netlink_ext_ack *ext_ack) |
| { |
| struct idpf_vport_user_config_data *config_data; |
| u32 new_rx_count, new_tx_count; |
| struct idpf_vport *vport; |
| int i, err = 0; |
| u16 idx; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| idx = vport->idx; |
| |
| if (ring->tx_pending < IDPF_MIN_TXQ_DESC) { |
| netdev_err(netdev, "Descriptors requested (Tx: %u) is less than min supported (%u)\n", |
| ring->tx_pending, |
| IDPF_MIN_TXQ_DESC); |
| err = -EINVAL; |
| goto unlock_mutex; |
| } |
| |
| if (ring->rx_pending < IDPF_MIN_RXQ_DESC) { |
| netdev_err(netdev, "Descriptors requested (Rx: %u) is less than min supported (%u)\n", |
| ring->rx_pending, |
| IDPF_MIN_RXQ_DESC); |
| err = -EINVAL; |
| goto unlock_mutex; |
| } |
| |
| new_rx_count = ALIGN(ring->rx_pending, IDPF_REQ_RXQ_DESC_MULTIPLE); |
| if (new_rx_count != ring->rx_pending) |
| netdev_info(netdev, "Requested Rx descriptor count rounded up to %u\n", |
| new_rx_count); |
| |
| new_tx_count = ALIGN(ring->tx_pending, IDPF_REQ_DESC_MULTIPLE); |
| if (new_tx_count != ring->tx_pending) |
| netdev_info(netdev, "Requested Tx descriptor count rounded up to %u\n", |
| new_tx_count); |
| |
| if (new_tx_count == vport->txq_desc_count && |
| new_rx_count == vport->rxq_desc_count && |
| kring->tcp_data_split == idpf_vport_get_hsplit(vport)) |
| goto unlock_mutex; |
| |
| if (!idpf_vport_set_hsplit(vport, kring->tcp_data_split)) { |
| NL_SET_ERR_MSG_MOD(ext_ack, |
| "setting TCP data split is not supported"); |
| err = -EOPNOTSUPP; |
| |
| goto unlock_mutex; |
| } |
| |
| config_data = &vport->adapter->vport_config[idx]->user_config; |
| config_data->num_req_txq_desc = new_tx_count; |
| config_data->num_req_rxq_desc = new_rx_count; |
| |
| /* Since we adjusted the RX completion queue count, the RX buffer queue |
| * descriptor count needs to be adjusted as well |
| */ |
| for (i = 0; i < vport->num_bufqs_per_qgrp; i++) |
| vport->bufq_desc_count[i] = |
| IDPF_RX_BUFQ_DESC_COUNT(new_rx_count, |
| vport->num_bufqs_per_qgrp); |
| |
| err = idpf_initiate_soft_reset(vport, IDPF_SR_Q_DESC_CHANGE); |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * struct idpf_stats - definition for an ethtool statistic |
| * @stat_string: statistic name to display in ethtool -S output |
| * @sizeof_stat: the sizeof() the stat, must be no greater than sizeof(u64) |
| * @stat_offset: offsetof() the stat from a base pointer |
| * |
| * This structure defines a statistic to be added to the ethtool stats buffer. |
| * It defines a statistic as offset from a common base pointer. Stats should |
| * be defined in constant arrays using the IDPF_STAT macro, with every element |
| * of the array using the same _type for calculating the sizeof_stat and |
| * stat_offset. |
| * |
| * The @sizeof_stat is expected to be sizeof(u8), sizeof(u16), sizeof(u32) or |
| * sizeof(u64). Other sizes are not expected and will produce a WARN_ONCE from |
| * the idpf_add_ethtool_stat() helper function. |
| * |
| * The @stat_string is interpreted as a format string, allowing formatted |
| * values to be inserted while looping over multiple structures for a given |
| * statistics array. Thus, every statistic string in an array should have the |
| * same type and number of format specifiers, to be formatted by variadic |
| * arguments to the idpf_add_stat_string() helper function. |
| */ |
| struct idpf_stats { |
| char stat_string[ETH_GSTRING_LEN]; |
| int sizeof_stat; |
| int stat_offset; |
| }; |
| |
| /* Helper macro to define an idpf_stat structure with proper size and type. |
| * Use this when defining constant statistics arrays. Note that @_type expects |
| * only a type name and is used multiple times. |
| */ |
| #define IDPF_STAT(_type, _name, _stat) { \ |
| .stat_string = _name, \ |
| .sizeof_stat = sizeof_field(_type, _stat), \ |
| .stat_offset = offsetof(_type, _stat) \ |
| } |
| |
| /* Helper macros for defining some statistics related to queues */ |
| #define IDPF_RX_QUEUE_STAT(_name, _stat) \ |
| IDPF_STAT(struct idpf_rx_queue, _name, _stat) |
| #define IDPF_TX_QUEUE_STAT(_name, _stat) \ |
| IDPF_STAT(struct idpf_tx_queue, _name, _stat) |
| |
| /* Stats associated with a Tx queue */ |
| static const struct idpf_stats idpf_gstrings_tx_queue_stats[] = { |
| IDPF_TX_QUEUE_STAT("pkts", q_stats.packets), |
| IDPF_TX_QUEUE_STAT("bytes", q_stats.bytes), |
| IDPF_TX_QUEUE_STAT("lso_pkts", q_stats.lso_pkts), |
| }; |
| |
| /* Stats associated with an Rx queue */ |
| static const struct idpf_stats idpf_gstrings_rx_queue_stats[] = { |
| IDPF_RX_QUEUE_STAT("pkts", q_stats.packets), |
| IDPF_RX_QUEUE_STAT("bytes", q_stats.bytes), |
| IDPF_RX_QUEUE_STAT("rx_gro_hw_pkts", q_stats.rsc_pkts), |
| }; |
| |
| #define IDPF_TX_QUEUE_STATS_LEN ARRAY_SIZE(idpf_gstrings_tx_queue_stats) |
| #define IDPF_RX_QUEUE_STATS_LEN ARRAY_SIZE(idpf_gstrings_rx_queue_stats) |
| |
| #define IDPF_PORT_STAT(_name, _stat) \ |
| IDPF_STAT(struct idpf_vport, _name, _stat) |
| |
| static const struct idpf_stats idpf_gstrings_port_stats[] = { |
| IDPF_PORT_STAT("rx-csum_errors", port_stats.rx_hw_csum_err), |
| IDPF_PORT_STAT("rx-hsplit", port_stats.rx_hsplit), |
| IDPF_PORT_STAT("rx-hsplit_hbo", port_stats.rx_hsplit_hbo), |
| IDPF_PORT_STAT("rx-bad_descs", port_stats.rx_bad_descs), |
| IDPF_PORT_STAT("tx-skb_drops", port_stats.tx_drops), |
| IDPF_PORT_STAT("tx-dma_map_errs", port_stats.tx_dma_map_errs), |
| IDPF_PORT_STAT("tx-linearized_pkts", port_stats.tx_linearize), |
| IDPF_PORT_STAT("tx-busy_events", port_stats.tx_busy), |
| IDPF_PORT_STAT("rx-unicast_pkts", port_stats.vport_stats.rx_unicast), |
| IDPF_PORT_STAT("rx-multicast_pkts", port_stats.vport_stats.rx_multicast), |
| IDPF_PORT_STAT("rx-broadcast_pkts", port_stats.vport_stats.rx_broadcast), |
| IDPF_PORT_STAT("rx-unknown_protocol", port_stats.vport_stats.rx_unknown_protocol), |
| IDPF_PORT_STAT("tx-unicast_pkts", port_stats.vport_stats.tx_unicast), |
| IDPF_PORT_STAT("tx-multicast_pkts", port_stats.vport_stats.tx_multicast), |
| IDPF_PORT_STAT("tx-broadcast_pkts", port_stats.vport_stats.tx_broadcast), |
| }; |
| |
| #define IDPF_PORT_STATS_LEN ARRAY_SIZE(idpf_gstrings_port_stats) |
| |
| /** |
| * __idpf_add_qstat_strings - copy stat strings into ethtool buffer |
| * @p: ethtool supplied buffer |
| * @stats: stat definitions array |
| * @size: size of the stats array |
| * @type: stat type |
| * @idx: stat index |
| * |
| * Format and copy the strings described by stats into the buffer pointed at |
| * by p. |
| */ |
| static void __idpf_add_qstat_strings(u8 **p, const struct idpf_stats *stats, |
| const unsigned int size, const char *type, |
| unsigned int idx) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < size; i++) |
| ethtool_sprintf(p, "%s_q-%u_%s", |
| type, idx, stats[i].stat_string); |
| } |
| |
| /** |
| * idpf_add_qstat_strings - Copy queue stat strings into ethtool buffer |
| * @p: ethtool supplied buffer |
| * @stats: stat definitions array |
| * @type: stat type |
| * @idx: stat idx |
| * |
| * Format and copy the strings described by the const static stats value into |
| * the buffer pointed at by p. |
| * |
| * The parameter @stats is evaluated twice, so parameters with side effects |
| * should be avoided. Additionally, stats must be an array such that |
| * ARRAY_SIZE can be called on it. |
| */ |
| #define idpf_add_qstat_strings(p, stats, type, idx) \ |
| __idpf_add_qstat_strings(p, stats, ARRAY_SIZE(stats), type, idx) |
| |
| /** |
| * idpf_add_stat_strings - Copy port stat strings into ethtool buffer |
| * @p: ethtool buffer |
| * @stats: struct to copy from |
| * @size: size of stats array to copy from |
| */ |
| static void idpf_add_stat_strings(u8 **p, const struct idpf_stats *stats, |
| const unsigned int size) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < size; i++) |
| ethtool_puts(p, stats[i].stat_string); |
| } |
| |
| /** |
| * idpf_get_stat_strings - Get stat strings |
| * @netdev: network interface device structure |
| * @data: buffer for string data |
| * |
| * Builds the statistics string table |
| */ |
| static void idpf_get_stat_strings(struct net_device *netdev, u8 *data) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_config *vport_config; |
| unsigned int i; |
| |
| idpf_add_stat_strings(&data, idpf_gstrings_port_stats, |
| IDPF_PORT_STATS_LEN); |
| |
| vport_config = np->adapter->vport_config[np->vport_idx]; |
| /* It's critical that we always report a constant number of strings and |
| * that the strings are reported in the same order regardless of how |
| * many queues are actually in use. |
| */ |
| for (i = 0; i < vport_config->max_q.max_txq; i++) |
| idpf_add_qstat_strings(&data, idpf_gstrings_tx_queue_stats, |
| "tx", i); |
| |
| for (i = 0; i < vport_config->max_q.max_rxq; i++) |
| idpf_add_qstat_strings(&data, idpf_gstrings_rx_queue_stats, |
| "rx", i); |
| } |
| |
| /** |
| * idpf_get_strings - Get string set |
| * @netdev: network interface device structure |
| * @sset: id of string set |
| * @data: buffer for string data |
| * |
| * Builds string tables for various string sets |
| */ |
| static void idpf_get_strings(struct net_device *netdev, u32 sset, u8 *data) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| idpf_get_stat_strings(netdev, data); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * idpf_get_sset_count - Get length of string set |
| * @netdev: network interface device structure |
| * @sset: id of string set |
| * |
| * Reports size of various string tables. |
| */ |
| static int idpf_get_sset_count(struct net_device *netdev, int sset) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_config *vport_config; |
| u16 max_txq, max_rxq; |
| |
| if (sset != ETH_SS_STATS) |
| return -EINVAL; |
| |
| vport_config = np->adapter->vport_config[np->vport_idx]; |
| /* This size reported back here *must* be constant throughout the |
| * lifecycle of the netdevice, i.e. we must report the maximum length |
| * even for queues that don't technically exist. This is due to the |
| * fact that this userspace API uses three separate ioctl calls to get |
| * stats data but has no way to communicate back to userspace when that |
| * size has changed, which can typically happen as a result of changing |
| * number of queues. If the number/order of stats change in the middle |
| * of this call chain it will lead to userspace crashing/accessing bad |
| * data through buffer under/overflow. |
| */ |
| max_txq = vport_config->max_q.max_txq; |
| max_rxq = vport_config->max_q.max_rxq; |
| |
| return IDPF_PORT_STATS_LEN + (IDPF_TX_QUEUE_STATS_LEN * max_txq) + |
| (IDPF_RX_QUEUE_STATS_LEN * max_rxq); |
| } |
| |
| /** |
| * idpf_add_one_ethtool_stat - copy the stat into the supplied buffer |
| * @data: location to store the stat value |
| * @pstat: old stat pointer to copy from |
| * @stat: the stat definition |
| * |
| * Copies the stat data defined by the pointer and stat structure pair into |
| * the memory supplied as data. If the pointer is null, data will be zero'd. |
| */ |
| static void idpf_add_one_ethtool_stat(u64 *data, const void *pstat, |
| const struct idpf_stats *stat) |
| { |
| char *p; |
| |
| if (!pstat) { |
| /* Ensure that the ethtool data buffer is zero'd for any stats |
| * which don't have a valid pointer. |
| */ |
| *data = 0; |
| return; |
| } |
| |
| p = (char *)pstat + stat->stat_offset; |
| switch (stat->sizeof_stat) { |
| case sizeof(u64): |
| *data = *((u64 *)p); |
| break; |
| case sizeof(u32): |
| *data = *((u32 *)p); |
| break; |
| case sizeof(u16): |
| *data = *((u16 *)p); |
| break; |
| case sizeof(u8): |
| *data = *((u8 *)p); |
| break; |
| default: |
| WARN_ONCE(1, "unexpected stat size for %s", |
| stat->stat_string); |
| *data = 0; |
| } |
| } |
| |
| /** |
| * idpf_add_queue_stats - copy queue statistics into supplied buffer |
| * @data: ethtool stats buffer |
| * @q: the queue to copy |
| * @type: type of the queue |
| * |
| * Queue statistics must be copied while protected by u64_stats_fetch_begin, |
| * so we can't directly use idpf_add_ethtool_stats. Assumes that queue stats |
| * are defined in idpf_gstrings_queue_stats. If the queue pointer is null, |
| * zero out the queue stat values and update the data pointer. Otherwise |
| * safely copy the stats from the queue into the supplied buffer and update |
| * the data pointer when finished. |
| * |
| * This function expects to be called while under rcu_read_lock(). |
| */ |
| static void idpf_add_queue_stats(u64 **data, const void *q, |
| enum virtchnl2_queue_type type) |
| { |
| const struct u64_stats_sync *stats_sync; |
| const struct idpf_stats *stats; |
| unsigned int start; |
| unsigned int size; |
| unsigned int i; |
| |
| if (type == VIRTCHNL2_QUEUE_TYPE_RX) { |
| size = IDPF_RX_QUEUE_STATS_LEN; |
| stats = idpf_gstrings_rx_queue_stats; |
| stats_sync = &((const struct idpf_rx_queue *)q)->stats_sync; |
| } else { |
| size = IDPF_TX_QUEUE_STATS_LEN; |
| stats = idpf_gstrings_tx_queue_stats; |
| stats_sync = &((const struct idpf_tx_queue *)q)->stats_sync; |
| } |
| |
| /* To avoid invalid statistics values, ensure that we keep retrying |
| * the copy until we get a consistent value according to |
| * u64_stats_fetch_retry. |
| */ |
| do { |
| start = u64_stats_fetch_begin(stats_sync); |
| for (i = 0; i < size; i++) |
| idpf_add_one_ethtool_stat(&(*data)[i], q, &stats[i]); |
| } while (u64_stats_fetch_retry(stats_sync, start)); |
| |
| /* Once we successfully copy the stats in, update the data pointer */ |
| *data += size; |
| } |
| |
| /** |
| * idpf_add_empty_queue_stats - Add stats for a non-existent queue |
| * @data: pointer to data buffer |
| * @qtype: type of data queue |
| * |
| * We must report a constant length of stats back to userspace regardless of |
| * how many queues are actually in use because stats collection happens over |
| * three separate ioctls and there's no way to notify userspace the size |
| * changed between those calls. This adds empty to data to the stats since we |
| * don't have a real queue to refer to for this stats slot. |
| */ |
| static void idpf_add_empty_queue_stats(u64 **data, u16 qtype) |
| { |
| unsigned int i; |
| int stats_len; |
| |
| if (qtype == VIRTCHNL2_QUEUE_TYPE_RX) |
| stats_len = IDPF_RX_QUEUE_STATS_LEN; |
| else |
| stats_len = IDPF_TX_QUEUE_STATS_LEN; |
| |
| for (i = 0; i < stats_len; i++) |
| (*data)[i] = 0; |
| *data += stats_len; |
| } |
| |
| /** |
| * idpf_add_port_stats - Copy port stats into ethtool buffer |
| * @vport: virtual port struct |
| * @data: ethtool buffer to copy into |
| */ |
| static void idpf_add_port_stats(struct idpf_vport *vport, u64 **data) |
| { |
| unsigned int size = IDPF_PORT_STATS_LEN; |
| unsigned int start; |
| unsigned int i; |
| |
| do { |
| start = u64_stats_fetch_begin(&vport->port_stats.stats_sync); |
| for (i = 0; i < size; i++) |
| idpf_add_one_ethtool_stat(&(*data)[i], vport, |
| &idpf_gstrings_port_stats[i]); |
| } while (u64_stats_fetch_retry(&vport->port_stats.stats_sync, start)); |
| |
| *data += size; |
| } |
| |
| /** |
| * idpf_collect_queue_stats - accumulate various per queue stats |
| * into port level stats |
| * @vport: pointer to vport struct |
| **/ |
| static void idpf_collect_queue_stats(struct idpf_vport *vport) |
| { |
| struct idpf_port_stats *pstats = &vport->port_stats; |
| int i, j; |
| |
| /* zero out port stats since they're actually tracked in per |
| * queue stats; this is only for reporting |
| */ |
| u64_stats_update_begin(&pstats->stats_sync); |
| u64_stats_set(&pstats->rx_hw_csum_err, 0); |
| u64_stats_set(&pstats->rx_hsplit, 0); |
| u64_stats_set(&pstats->rx_hsplit_hbo, 0); |
| u64_stats_set(&pstats->rx_bad_descs, 0); |
| u64_stats_set(&pstats->tx_linearize, 0); |
| u64_stats_set(&pstats->tx_busy, 0); |
| u64_stats_set(&pstats->tx_drops, 0); |
| u64_stats_set(&pstats->tx_dma_map_errs, 0); |
| u64_stats_update_end(&pstats->stats_sync); |
| |
| for (i = 0; i < vport->num_rxq_grp; i++) { |
| struct idpf_rxq_group *rxq_grp = &vport->rxq_grps[i]; |
| u16 num_rxq; |
| |
| if (idpf_is_queue_model_split(vport->rxq_model)) |
| num_rxq = rxq_grp->splitq.num_rxq_sets; |
| else |
| num_rxq = rxq_grp->singleq.num_rxq; |
| |
| for (j = 0; j < num_rxq; j++) { |
| u64 hw_csum_err, hsplit, hsplit_hbo, bad_descs; |
| struct idpf_rx_queue_stats *stats; |
| struct idpf_rx_queue *rxq; |
| unsigned int start; |
| |
| if (idpf_is_queue_model_split(vport->rxq_model)) |
| rxq = &rxq_grp->splitq.rxq_sets[j]->rxq; |
| else |
| rxq = rxq_grp->singleq.rxqs[j]; |
| |
| if (!rxq) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin(&rxq->stats_sync); |
| |
| stats = &rxq->q_stats; |
| hw_csum_err = u64_stats_read(&stats->hw_csum_err); |
| hsplit = u64_stats_read(&stats->hsplit_pkts); |
| hsplit_hbo = u64_stats_read(&stats->hsplit_buf_ovf); |
| bad_descs = u64_stats_read(&stats->bad_descs); |
| } while (u64_stats_fetch_retry(&rxq->stats_sync, start)); |
| |
| u64_stats_update_begin(&pstats->stats_sync); |
| u64_stats_add(&pstats->rx_hw_csum_err, hw_csum_err); |
| u64_stats_add(&pstats->rx_hsplit, hsplit); |
| u64_stats_add(&pstats->rx_hsplit_hbo, hsplit_hbo); |
| u64_stats_add(&pstats->rx_bad_descs, bad_descs); |
| u64_stats_update_end(&pstats->stats_sync); |
| } |
| } |
| |
| for (i = 0; i < vport->num_txq_grp; i++) { |
| struct idpf_txq_group *txq_grp = &vport->txq_grps[i]; |
| |
| for (j = 0; j < txq_grp->num_txq; j++) { |
| u64 linearize, qbusy, skb_drops, dma_map_errs; |
| struct idpf_tx_queue *txq = txq_grp->txqs[j]; |
| struct idpf_tx_queue_stats *stats; |
| unsigned int start; |
| |
| if (!txq) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin(&txq->stats_sync); |
| |
| stats = &txq->q_stats; |
| linearize = u64_stats_read(&stats->linearize); |
| qbusy = u64_stats_read(&stats->q_busy); |
| skb_drops = u64_stats_read(&stats->skb_drops); |
| dma_map_errs = u64_stats_read(&stats->dma_map_errs); |
| } while (u64_stats_fetch_retry(&txq->stats_sync, start)); |
| |
| u64_stats_update_begin(&pstats->stats_sync); |
| u64_stats_add(&pstats->tx_linearize, linearize); |
| u64_stats_add(&pstats->tx_busy, qbusy); |
| u64_stats_add(&pstats->tx_drops, skb_drops); |
| u64_stats_add(&pstats->tx_dma_map_errs, dma_map_errs); |
| u64_stats_update_end(&pstats->stats_sync); |
| } |
| } |
| } |
| |
| /** |
| * idpf_get_ethtool_stats - report device statistics |
| * @netdev: network interface device structure |
| * @stats: ethtool statistics structure |
| * @data: pointer to data buffer |
| * |
| * All statistics are added to the data buffer as an array of u64. |
| */ |
| static void idpf_get_ethtool_stats(struct net_device *netdev, |
| struct ethtool_stats __always_unused *stats, |
| u64 *data) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_config *vport_config; |
| struct idpf_vport *vport; |
| unsigned int total = 0; |
| unsigned int i, j; |
| bool is_splitq; |
| u16 qtype; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| if (np->state != __IDPF_VPORT_UP) { |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return; |
| } |
| |
| rcu_read_lock(); |
| |
| idpf_collect_queue_stats(vport); |
| idpf_add_port_stats(vport, &data); |
| |
| for (i = 0; i < vport->num_txq_grp; i++) { |
| struct idpf_txq_group *txq_grp = &vport->txq_grps[i]; |
| |
| qtype = VIRTCHNL2_QUEUE_TYPE_TX; |
| |
| for (j = 0; j < txq_grp->num_txq; j++, total++) { |
| struct idpf_tx_queue *txq = txq_grp->txqs[j]; |
| |
| if (!txq) |
| idpf_add_empty_queue_stats(&data, qtype); |
| else |
| idpf_add_queue_stats(&data, txq, qtype); |
| } |
| } |
| |
| vport_config = vport->adapter->vport_config[vport->idx]; |
| /* It is critical we provide a constant number of stats back to |
| * userspace regardless of how many queues are actually in use because |
| * there is no way to inform userspace the size has changed between |
| * ioctl calls. This will fill in any missing stats with zero. |
| */ |
| for (; total < vport_config->max_q.max_txq; total++) |
| idpf_add_empty_queue_stats(&data, VIRTCHNL2_QUEUE_TYPE_TX); |
| total = 0; |
| |
| is_splitq = idpf_is_queue_model_split(vport->rxq_model); |
| |
| for (i = 0; i < vport->num_rxq_grp; i++) { |
| struct idpf_rxq_group *rxq_grp = &vport->rxq_grps[i]; |
| u16 num_rxq; |
| |
| qtype = VIRTCHNL2_QUEUE_TYPE_RX; |
| |
| if (is_splitq) |
| num_rxq = rxq_grp->splitq.num_rxq_sets; |
| else |
| num_rxq = rxq_grp->singleq.num_rxq; |
| |
| for (j = 0; j < num_rxq; j++, total++) { |
| struct idpf_rx_queue *rxq; |
| |
| if (is_splitq) |
| rxq = &rxq_grp->splitq.rxq_sets[j]->rxq; |
| else |
| rxq = rxq_grp->singleq.rxqs[j]; |
| if (!rxq) |
| idpf_add_empty_queue_stats(&data, qtype); |
| else |
| idpf_add_queue_stats(&data, rxq, qtype); |
| } |
| } |
| |
| for (; total < vport_config->max_q.max_rxq; total++) |
| idpf_add_empty_queue_stats(&data, VIRTCHNL2_QUEUE_TYPE_RX); |
| |
| rcu_read_unlock(); |
| |
| idpf_vport_ctrl_unlock(netdev); |
| } |
| |
| /** |
| * idpf_find_rxq_vec - find rxq vector from q index |
| * @vport: virtual port associated to queue |
| * @q_num: q index used to find queue |
| * |
| * returns pointer to rx vector |
| */ |
| static struct idpf_q_vector *idpf_find_rxq_vec(const struct idpf_vport *vport, |
| int q_num) |
| { |
| int q_grp, q_idx; |
| |
| if (!idpf_is_queue_model_split(vport->rxq_model)) |
| return vport->rxq_grps->singleq.rxqs[q_num]->q_vector; |
| |
| q_grp = q_num / IDPF_DFLT_SPLITQ_RXQ_PER_GROUP; |
| q_idx = q_num % IDPF_DFLT_SPLITQ_RXQ_PER_GROUP; |
| |
| return vport->rxq_grps[q_grp].splitq.rxq_sets[q_idx]->rxq.q_vector; |
| } |
| |
| /** |
| * idpf_find_txq_vec - find txq vector from q index |
| * @vport: virtual port associated to queue |
| * @q_num: q index used to find queue |
| * |
| * returns pointer to tx vector |
| */ |
| static struct idpf_q_vector *idpf_find_txq_vec(const struct idpf_vport *vport, |
| int q_num) |
| { |
| int q_grp; |
| |
| if (!idpf_is_queue_model_split(vport->txq_model)) |
| return vport->txqs[q_num]->q_vector; |
| |
| q_grp = q_num / IDPF_DFLT_SPLITQ_TXQ_PER_GROUP; |
| |
| return vport->txq_grps[q_grp].complq->q_vector; |
| } |
| |
| /** |
| * __idpf_get_q_coalesce - get ITR values for specific queue |
| * @ec: ethtool structure to fill with driver's coalesce settings |
| * @q_vector: queue vector corresponding to this queue |
| * @type: queue type |
| */ |
| static void __idpf_get_q_coalesce(struct ethtool_coalesce *ec, |
| const struct idpf_q_vector *q_vector, |
| enum virtchnl2_queue_type type) |
| { |
| if (type == VIRTCHNL2_QUEUE_TYPE_RX) { |
| ec->use_adaptive_rx_coalesce = |
| IDPF_ITR_IS_DYNAMIC(q_vector->rx_intr_mode); |
| ec->rx_coalesce_usecs = q_vector->rx_itr_value; |
| } else { |
| ec->use_adaptive_tx_coalesce = |
| IDPF_ITR_IS_DYNAMIC(q_vector->tx_intr_mode); |
| ec->tx_coalesce_usecs = q_vector->tx_itr_value; |
| } |
| } |
| |
| /** |
| * idpf_get_q_coalesce - get ITR values for specific queue |
| * @netdev: pointer to the netdev associated with this query |
| * @ec: coalesce settings to program the device with |
| * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index |
| * |
| * Return 0 on success, and negative on failure |
| */ |
| static int idpf_get_q_coalesce(struct net_device *netdev, |
| struct ethtool_coalesce *ec, |
| u32 q_num) |
| { |
| const struct idpf_netdev_priv *np = netdev_priv(netdev); |
| const struct idpf_vport *vport; |
| int err = 0; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| if (np->state != __IDPF_VPORT_UP) |
| goto unlock_mutex; |
| |
| if (q_num >= vport->num_rxq && q_num >= vport->num_txq) { |
| err = -EINVAL; |
| goto unlock_mutex; |
| } |
| |
| if (q_num < vport->num_rxq) |
| __idpf_get_q_coalesce(ec, idpf_find_rxq_vec(vport, q_num), |
| VIRTCHNL2_QUEUE_TYPE_RX); |
| |
| if (q_num < vport->num_txq) |
| __idpf_get_q_coalesce(ec, idpf_find_txq_vec(vport, q_num), |
| VIRTCHNL2_QUEUE_TYPE_TX); |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_get_coalesce - get ITR values as requested by user |
| * @netdev: pointer to the netdev associated with this query |
| * @ec: coalesce settings to be filled |
| * @kec: unused |
| * @extack: unused |
| * |
| * Return 0 on success, and negative on failure |
| */ |
| static int idpf_get_coalesce(struct net_device *netdev, |
| struct ethtool_coalesce *ec, |
| struct kernel_ethtool_coalesce *kec, |
| struct netlink_ext_ack *extack) |
| { |
| /* Return coalesce based on queue number zero */ |
| return idpf_get_q_coalesce(netdev, ec, 0); |
| } |
| |
| /** |
| * idpf_get_per_q_coalesce - get ITR values as requested by user |
| * @netdev: pointer to the netdev associated with this query |
| * @q_num: queue for which the itr values has to retrieved |
| * @ec: coalesce settings to be filled |
| * |
| * Return 0 on success, and negative on failure |
| */ |
| |
| static int idpf_get_per_q_coalesce(struct net_device *netdev, u32 q_num, |
| struct ethtool_coalesce *ec) |
| { |
| return idpf_get_q_coalesce(netdev, ec, q_num); |
| } |
| |
| /** |
| * __idpf_set_q_coalesce - set ITR values for specific queue |
| * @ec: ethtool structure from user to update ITR settings |
| * @qv: queue vector for which itr values has to be set |
| * @is_rxq: is queue type rx |
| * |
| * Returns 0 on success, negative otherwise. |
| */ |
| static int __idpf_set_q_coalesce(const struct ethtool_coalesce *ec, |
| struct idpf_q_vector *qv, bool is_rxq) |
| { |
| u32 use_adaptive_coalesce, coalesce_usecs; |
| bool is_dim_ena = false; |
| u16 itr_val; |
| |
| if (is_rxq) { |
| is_dim_ena = IDPF_ITR_IS_DYNAMIC(qv->rx_intr_mode); |
| use_adaptive_coalesce = ec->use_adaptive_rx_coalesce; |
| coalesce_usecs = ec->rx_coalesce_usecs; |
| itr_val = qv->rx_itr_value; |
| } else { |
| is_dim_ena = IDPF_ITR_IS_DYNAMIC(qv->tx_intr_mode); |
| use_adaptive_coalesce = ec->use_adaptive_tx_coalesce; |
| coalesce_usecs = ec->tx_coalesce_usecs; |
| itr_val = qv->tx_itr_value; |
| } |
| if (coalesce_usecs != itr_val && use_adaptive_coalesce) { |
| netdev_err(qv->vport->netdev, "Cannot set coalesce usecs if adaptive enabled\n"); |
| |
| return -EINVAL; |
| } |
| |
| if (is_dim_ena && use_adaptive_coalesce) |
| return 0; |
| |
| if (coalesce_usecs > IDPF_ITR_MAX) { |
| netdev_err(qv->vport->netdev, |
| "Invalid value, %d-usecs range is 0-%d\n", |
| coalesce_usecs, IDPF_ITR_MAX); |
| |
| return -EINVAL; |
| } |
| |
| if (coalesce_usecs % 2) { |
| coalesce_usecs--; |
| netdev_info(qv->vport->netdev, |
| "HW only supports even ITR values, ITR rounded to %d\n", |
| coalesce_usecs); |
| } |
| |
| if (is_rxq) { |
| qv->rx_itr_value = coalesce_usecs; |
| if (use_adaptive_coalesce) { |
| qv->rx_intr_mode = IDPF_ITR_DYNAMIC; |
| } else { |
| qv->rx_intr_mode = !IDPF_ITR_DYNAMIC; |
| idpf_vport_intr_write_itr(qv, qv->rx_itr_value, |
| false); |
| } |
| } else { |
| qv->tx_itr_value = coalesce_usecs; |
| if (use_adaptive_coalesce) { |
| qv->tx_intr_mode = IDPF_ITR_DYNAMIC; |
| } else { |
| qv->tx_intr_mode = !IDPF_ITR_DYNAMIC; |
| idpf_vport_intr_write_itr(qv, qv->tx_itr_value, true); |
| } |
| } |
| |
| /* Update of static/dynamic itr will be taken care when interrupt is |
| * fired |
| */ |
| return 0; |
| } |
| |
| /** |
| * idpf_set_q_coalesce - set ITR values for specific queue |
| * @vport: vport associated to the queue that need updating |
| * @ec: coalesce settings to program the device with |
| * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index |
| * @is_rxq: is queue type rx |
| * |
| * Return 0 on success, and negative on failure |
| */ |
| static int idpf_set_q_coalesce(const struct idpf_vport *vport, |
| const struct ethtool_coalesce *ec, |
| int q_num, bool is_rxq) |
| { |
| struct idpf_q_vector *qv; |
| |
| qv = is_rxq ? idpf_find_rxq_vec(vport, q_num) : |
| idpf_find_txq_vec(vport, q_num); |
| |
| if (qv && __idpf_set_q_coalesce(ec, qv, is_rxq)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_set_coalesce - set ITR values as requested by user |
| * @netdev: pointer to the netdev associated with this query |
| * @ec: coalesce settings to program the device with |
| * @kec: unused |
| * @extack: unused |
| * |
| * Return 0 on success, and negative on failure |
| */ |
| static int idpf_set_coalesce(struct net_device *netdev, |
| struct ethtool_coalesce *ec, |
| struct kernel_ethtool_coalesce *kec, |
| struct netlink_ext_ack *extack) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport *vport; |
| int i, err = 0; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| if (np->state != __IDPF_VPORT_UP) |
| goto unlock_mutex; |
| |
| for (i = 0; i < vport->num_txq; i++) { |
| err = idpf_set_q_coalesce(vport, ec, i, false); |
| if (err) |
| goto unlock_mutex; |
| } |
| |
| for (i = 0; i < vport->num_rxq; i++) { |
| err = idpf_set_q_coalesce(vport, ec, i, true); |
| if (err) |
| goto unlock_mutex; |
| } |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_set_per_q_coalesce - set ITR values as requested by user |
| * @netdev: pointer to the netdev associated with this query |
| * @q_num: queue for which the itr values has to be set |
| * @ec: coalesce settings to program the device with |
| * |
| * Return 0 on success, and negative on failure |
| */ |
| static int idpf_set_per_q_coalesce(struct net_device *netdev, u32 q_num, |
| struct ethtool_coalesce *ec) |
| { |
| struct idpf_vport *vport; |
| int err; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| err = idpf_set_q_coalesce(vport, ec, q_num, false); |
| if (err) { |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| err = idpf_set_q_coalesce(vport, ec, q_num, true); |
| |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_get_msglevel - Get debug message level |
| * @netdev: network interface device structure |
| * |
| * Returns current debug message level. |
| */ |
| static u32 idpf_get_msglevel(struct net_device *netdev) |
| { |
| struct idpf_adapter *adapter = idpf_netdev_to_adapter(netdev); |
| |
| return adapter->msg_enable; |
| } |
| |
| /** |
| * idpf_set_msglevel - Set debug message level |
| * @netdev: network interface device structure |
| * @data: message level |
| * |
| * Set current debug message level. Higher values cause the driver to |
| * be noisier. |
| */ |
| static void idpf_set_msglevel(struct net_device *netdev, u32 data) |
| { |
| struct idpf_adapter *adapter = idpf_netdev_to_adapter(netdev); |
| |
| adapter->msg_enable = data; |
| } |
| |
| /** |
| * idpf_get_link_ksettings - Get Link Speed and Duplex settings |
| * @netdev: network interface device structure |
| * @cmd: ethtool command |
| * |
| * Reports speed/duplex settings. |
| **/ |
| static int idpf_get_link_ksettings(struct net_device *netdev, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct idpf_vport *vport; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| ethtool_link_ksettings_zero_link_mode(cmd, supported); |
| cmd->base.autoneg = AUTONEG_DISABLE; |
| cmd->base.port = PORT_NONE; |
| if (vport->link_up) { |
| cmd->base.duplex = DUPLEX_FULL; |
| cmd->base.speed = vport->link_speed_mbps; |
| } else { |
| cmd->base.duplex = DUPLEX_UNKNOWN; |
| cmd->base.speed = SPEED_UNKNOWN; |
| } |
| |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return 0; |
| } |
| |
| static const struct ethtool_ops idpf_ethtool_ops = { |
| .supported_coalesce_params = ETHTOOL_COALESCE_USECS | |
| ETHTOOL_COALESCE_USE_ADAPTIVE, |
| .supported_ring_params = ETHTOOL_RING_USE_TCP_DATA_SPLIT, |
| .get_msglevel = idpf_get_msglevel, |
| .set_msglevel = idpf_set_msglevel, |
| .get_link = ethtool_op_get_link, |
| .get_coalesce = idpf_get_coalesce, |
| .set_coalesce = idpf_set_coalesce, |
| .get_per_queue_coalesce = idpf_get_per_q_coalesce, |
| .set_per_queue_coalesce = idpf_set_per_q_coalesce, |
| .get_ethtool_stats = idpf_get_ethtool_stats, |
| .get_strings = idpf_get_strings, |
| .get_sset_count = idpf_get_sset_count, |
| .get_channels = idpf_get_channels, |
| .get_rxnfc = idpf_get_rxnfc, |
| .get_rxfh_key_size = idpf_get_rxfh_key_size, |
| .get_rxfh_indir_size = idpf_get_rxfh_indir_size, |
| .get_rxfh = idpf_get_rxfh, |
| .set_rxfh = idpf_set_rxfh, |
| .set_channels = idpf_set_channels, |
| .get_ringparam = idpf_get_ringparam, |
| .set_ringparam = idpf_set_ringparam, |
| .get_link_ksettings = idpf_get_link_ksettings, |
| }; |
| |
| /** |
| * idpf_set_ethtool_ops - Initialize ethtool ops struct |
| * @netdev: network interface device structure |
| * |
| * Sets ethtool ops struct in our netdev so that ethtool can call |
| * our functions. |
| */ |
| void idpf_set_ethtool_ops(struct net_device *netdev) |
| { |
| netdev->ethtool_ops = &idpf_ethtool_ops; |
| } |