drivers/net/ethernet/intel/igbvf/mbx.c

// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2009 - 2018 Intel Corporation. */

#include <linux/bitfield.h>
#include "mbx.h"

/**
 *  e1000_poll_for_msg - Wait for message notification
 *  @hw: pointer to the HW structure
 *
 *  returns SUCCESS if it successfully received a message notification
 **/
static s32 e1000_poll_for_msg(struct e1000_hw *hw)
{
	struct e1000_mbx_info *mbx = &hw->mbx;
	int countdown = mbx->timeout;

	if (!mbx->ops.check_for_msg)
		goto out;

	while (countdown && mbx->ops.check_for_msg(hw)) {
		countdown--;
		udelay(mbx->usec_delay);
	}

	/* if we failed, all future posted messages fail until reset */
	if (!countdown)
		mbx->timeout = 0;
out:
	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
}

/**
 *  e1000_poll_for_ack - Wait for message acknowledgment
 *  @hw: pointer to the HW structure
 *
 *  returns SUCCESS if it successfully received a message acknowledgment
 **/
static s32 e1000_poll_for_ack(struct e1000_hw *hw)
{
	struct e1000_mbx_info *mbx = &hw->mbx;
	int countdown = mbx->timeout;

	if (!mbx->ops.check_for_ack)
		goto out;

	while (countdown && mbx->ops.check_for_ack(hw)) {
		countdown--;
		udelay(mbx->usec_delay);
	}

	/* if we failed, all future posted messages fail until reset */
	if (!countdown)
		mbx->timeout = 0;
out:
	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
}

/**
 *  e1000_read_posted_mbx - Wait for message notification and receive message
 *  @hw: pointer to the HW structure
 *  @msg: The message buffer
 *  @size: Length of buffer
 *
 *  returns SUCCESS if it successfully received a message notification and
 *  copied it into the receive buffer.
 **/
static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
{
	struct e1000_mbx_info *mbx = &hw->mbx;
	s32 ret_val = -E1000_ERR_MBX;

	if (!mbx->ops.read)
		goto out;

	ret_val = e1000_poll_for_msg(hw);

	/* if ack received read message, otherwise we timed out */
	if (!ret_val)
		ret_val = mbx->ops.read(hw, msg, size);
out:
	return ret_val;
}

/**
 *  e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
 *  @hw: pointer to the HW structure
 *  @msg: The message buffer
 *  @size: Length of buffer
 *
 *  returns SUCCESS if it successfully copied message into the buffer and
 *  received an ack to that message within delay * timeout period
 **/
static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
{
	struct e1000_mbx_info *mbx = &hw->mbx;
	s32 ret_val = -E1000_ERR_MBX;

	/* exit if we either can't write or there isn't a defined timeout */
	if (!mbx->ops.write || !mbx->timeout)
		goto out;

	/* send msg*/
	ret_val = mbx->ops.write(hw, msg, size);

	/* if msg sent wait until we receive an ack */
	if (!ret_val)
		ret_val = e1000_poll_for_ack(hw);
out:
	return ret_val;
}

/**
 *  e1000_read_v2p_mailbox - read v2p mailbox
 *  @hw: pointer to the HW structure
 *
 *  This function is used to read the v2p mailbox without losing the read to
 *  clear status bits.
 **/
static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw)
{
	u32 v2p_mailbox = er32(V2PMAILBOX(0));

	v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
	hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;

	return v2p_mailbox;
}

/**
 *  e1000_check_for_bit_vf - Determine if a status bit was set
 *  @hw: pointer to the HW structure
 *  @mask: bitmask for bits to be tested and cleared
 *
 *  This function is used to check for the read to clear bits within
 *  the V2P mailbox.
 **/
static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
{
	u32 v2p_mailbox = e1000_read_v2p_mailbox(hw);
	s32 ret_val = -E1000_ERR_MBX;

	if (v2p_mailbox & mask)
		ret_val = E1000_SUCCESS;

	hw->dev_spec.vf.v2p_mailbox &= ~mask;

	return ret_val;
}

/**
 *  e1000_check_for_msg_vf - checks to see if the PF has sent mail
 *  @hw: pointer to the HW structure
 *
 *  returns SUCCESS if the PF has set the Status bit or else ERR_MBX
 **/
static s32 e1000_check_for_msg_vf(struct e1000_hw *hw)
{
	s32 ret_val = -E1000_ERR_MBX;

	if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
		ret_val = E1000_SUCCESS;
		hw->mbx.stats.reqs++;
	}

	return ret_val;
}

/**
 *  e1000_check_for_ack_vf - checks to see if the PF has ACK'd
 *  @hw: pointer to the HW structure
 *
 *  returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
 **/
static s32 e1000_check_for_ack_vf(struct e1000_hw *hw)
{
	s32 ret_val = -E1000_ERR_MBX;

	if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
		ret_val = E1000_SUCCESS;
		hw->mbx.stats.acks++;
	}

	return ret_val;
}

/**
 *  e1000_check_for_rst_vf - checks to see if the PF has reset
 *  @hw: pointer to the HW structure
 *
 *  returns true if the PF has set the reset done bit or else false
 **/
static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
{
	s32 ret_val = -E1000_ERR_MBX;

	if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
					 E1000_V2PMAILBOX_RSTI))) {
		ret_val = E1000_SUCCESS;
		hw->mbx.stats.rsts++;
	}

	return ret_val;
}

/**
 *  e1000_obtain_mbx_lock_vf - obtain mailbox lock
 *  @hw: pointer to the HW structure
 *
 *  return SUCCESS if we obtained the mailbox lock
 **/
static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
{
	s32 ret_val = -E1000_ERR_MBX;
	int count = 10;

	do {
		/* Take ownership of the buffer */
		ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);

		/* reserve mailbox for VF use */
		if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU) {
			ret_val = 0;
			break;
		}
		udelay(1000);
	} while (count-- > 0);

	return ret_val;
}

/**
 *  e1000_write_mbx_vf - Write a message to the mailbox
 *  @hw: pointer to the HW structure
 *  @msg: The message buffer
 *  @size: Length of buffer
 *
 *  returns SUCCESS if it successfully copied message into the buffer
 **/
static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
{
	s32 err;
	u16 i;

	lockdep_assert_held(&hw->mbx_lock);

	/* lock the mailbox to prevent pf/vf race condition */
	err = e1000_obtain_mbx_lock_vf(hw);
	if (err)
		goto out_no_write;

	/* flush any ack or msg as we are going to overwrite mailbox */
	e1000_check_for_ack_vf(hw);
	e1000_check_for_msg_vf(hw);

	/* copy the caller specified message to the mailbox memory buffer */
	for (i = 0; i < size; i++)
		array_ew32(VMBMEM(0), i, msg[i]);

	/* update stats */
	hw->mbx.stats.msgs_tx++;

	/* Drop VFU and interrupt the PF to tell it a message has been sent */
	ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);

out_no_write:
	return err;
}

/**
 *  e1000_read_mbx_vf - Reads a message from the inbox intended for VF
 *  @hw: pointer to the HW structure
 *  @msg: The message buffer
 *  @size: Length of buffer
 *
 *  returns SUCCESS if it successfully read message from buffer
 **/
static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
{
	s32 err;
	u16 i;

	lockdep_assert_held(&hw->mbx_lock);

	/* lock the mailbox to prevent pf/vf race condition */
	err = e1000_obtain_mbx_lock_vf(hw);
	if (err)
		goto out_no_read;

	/* copy the message from the mailbox memory buffer */
	for (i = 0; i < size; i++)
		msg[i] = array_er32(VMBMEM(0), i);

	/* Acknowledge receipt and release mailbox, then we're done */
	ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);

	/* update stats */
	hw->mbx.stats.msgs_rx++;

out_no_read:
	return err;
}

/**
 *  e1000_init_mbx_params_vf - set initial values for VF mailbox
 *  @hw: pointer to the HW structure
 *
 *  Initializes the hw->mbx struct to correct values for VF mailbox
 */
s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
{
	struct e1000_mbx_info *mbx = &hw->mbx;

	/* start mailbox as timed out and let the reset_hw call set the timeout
	 * value to being communications
	 */
	mbx->timeout = 0;
	mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;

	mbx->size = E1000_VFMAILBOX_SIZE;

	mbx->ops.read = e1000_read_mbx_vf;
	mbx->ops.write = e1000_write_mbx_vf;
	mbx->ops.read_posted = e1000_read_posted_mbx;
	mbx->ops.write_posted = e1000_write_posted_mbx;
	mbx->ops.check_for_msg = e1000_check_for_msg_vf;
	mbx->ops.check_for_ack = e1000_check_for_ack_vf;
	mbx->ops.check_for_rst = e1000_check_for_rst_vf;

	mbx->stats.msgs_tx = 0;
	mbx->stats.msgs_rx = 0;
	mbx->stats.reqs = 0;
	mbx->stats.acks = 0;
	mbx->stats.rsts = 0;

	return E1000_SUCCESS;
}