| // SPDX-License-Identifier: ISC |
| /* |
| * Copyright (c) 2014,2017 Qualcomm Atheros, Inc. |
| * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include "wil6210.h" |
| #include <linux/jiffies.h> |
| #include <linux/pm_runtime.h> |
| |
| #define WIL6210_AUTOSUSPEND_DELAY_MS (1000) |
| |
| static void wil_pm_wake_connected_net_queues(struct wil6210_priv *wil) |
| { |
| int i; |
| |
| mutex_lock(&wil->vif_mutex); |
| for (i = 0; i < GET_MAX_VIFS(wil); i++) { |
| struct wil6210_vif *vif = wil->vifs[i]; |
| |
| if (vif && test_bit(wil_vif_fwconnected, vif->status)) |
| wil_update_net_queues_bh(wil, vif, NULL, false); |
| } |
| mutex_unlock(&wil->vif_mutex); |
| } |
| |
| static void wil_pm_stop_all_net_queues(struct wil6210_priv *wil) |
| { |
| int i; |
| |
| mutex_lock(&wil->vif_mutex); |
| for (i = 0; i < GET_MAX_VIFS(wil); i++) { |
| struct wil6210_vif *vif = wil->vifs[i]; |
| |
| if (vif) |
| wil_update_net_queues_bh(wil, vif, NULL, true); |
| } |
| mutex_unlock(&wil->vif_mutex); |
| } |
| |
| static bool |
| wil_can_suspend_vif(struct wil6210_priv *wil, struct wil6210_vif *vif, |
| bool is_runtime) |
| { |
| struct wireless_dev *wdev = vif_to_wdev(vif); |
| |
| switch (wdev->iftype) { |
| case NL80211_IFTYPE_MONITOR: |
| wil_dbg_pm(wil, "Sniffer\n"); |
| return false; |
| |
| /* for STA-like interface, don't runtime suspend */ |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| if (test_bit(wil_vif_fwconnecting, vif->status)) { |
| wil_dbg_pm(wil, "Delay suspend when connecting\n"); |
| return false; |
| } |
| if (is_runtime) { |
| wil_dbg_pm(wil, "STA-like interface\n"); |
| return false; |
| } |
| break; |
| /* AP-like interface - can't suspend */ |
| default: |
| wil_dbg_pm(wil, "AP-like interface\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int wil_can_suspend(struct wil6210_priv *wil, bool is_runtime) |
| { |
| int rc = 0, i; |
| bool wmi_only = test_bit(WMI_FW_CAPABILITY_WMI_ONLY, |
| wil->fw_capabilities); |
| bool active_ifaces; |
| |
| wil_dbg_pm(wil, "can_suspend: %s\n", is_runtime ? "runtime" : "system"); |
| |
| if (wmi_only || debug_fw) { |
| wil_dbg_pm(wil, "Deny any suspend - %s mode\n", |
| wmi_only ? "wmi_only" : "debug_fw"); |
| rc = -EBUSY; |
| goto out; |
| } |
| if (is_runtime && !wil->platform_ops.suspend) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| mutex_lock(&wil->vif_mutex); |
| active_ifaces = wil_has_active_ifaces(wil, true, false); |
| mutex_unlock(&wil->vif_mutex); |
| |
| if (!active_ifaces) { |
| /* can always sleep when down */ |
| wil_dbg_pm(wil, "Interface is down\n"); |
| goto out; |
| } |
| if (test_bit(wil_status_resetting, wil->status)) { |
| wil_dbg_pm(wil, "Delay suspend when resetting\n"); |
| rc = -EBUSY; |
| goto out; |
| } |
| if (wil->recovery_state != fw_recovery_idle) { |
| wil_dbg_pm(wil, "Delay suspend during recovery\n"); |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| /* interface is running */ |
| mutex_lock(&wil->vif_mutex); |
| for (i = 0; i < GET_MAX_VIFS(wil); i++) { |
| struct wil6210_vif *vif = wil->vifs[i]; |
| |
| if (!vif) |
| continue; |
| if (!wil_can_suspend_vif(wil, vif, is_runtime)) { |
| rc = -EBUSY; |
| mutex_unlock(&wil->vif_mutex); |
| goto out; |
| } |
| } |
| mutex_unlock(&wil->vif_mutex); |
| |
| out: |
| wil_dbg_pm(wil, "can_suspend: %s => %s (%d)\n", |
| is_runtime ? "runtime" : "system", rc ? "No" : "Yes", rc); |
| |
| if (rc) |
| wil->suspend_stats.rejected_by_host++; |
| |
| return rc; |
| } |
| |
| static int wil_resume_keep_radio_on(struct wil6210_priv *wil) |
| { |
| int rc = 0; |
| |
| /* wil_status_resuming will be cleared when getting |
| * WMI_TRAFFIC_RESUME_EVENTID |
| */ |
| set_bit(wil_status_resuming, wil->status); |
| clear_bit(wil_status_suspended, wil->status); |
| wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); |
| wil_unmask_irq(wil); |
| |
| wil6210_bus_request(wil, wil->bus_request_kbps_pre_suspend); |
| |
| /* Send WMI resume request to the device */ |
| rc = wmi_resume(wil); |
| if (rc) { |
| wil_err(wil, "device failed to resume (%d)\n", rc); |
| if (no_fw_recovery) |
| goto out; |
| rc = wil_down(wil); |
| if (rc) { |
| wil_err(wil, "wil_down failed (%d)\n", rc); |
| goto out; |
| } |
| rc = wil_up(wil); |
| if (rc) { |
| wil_err(wil, "wil_up failed (%d)\n", rc); |
| goto out; |
| } |
| } |
| |
| /* Wake all queues */ |
| wil_pm_wake_connected_net_queues(wil); |
| |
| out: |
| if (rc) |
| set_bit(wil_status_suspended, wil->status); |
| return rc; |
| } |
| |
| static int wil_suspend_keep_radio_on(struct wil6210_priv *wil) |
| { |
| int rc = 0; |
| unsigned long data_comp_to; |
| |
| wil_dbg_pm(wil, "suspend keep radio on\n"); |
| |
| /* Prevent handling of new tx and wmi commands */ |
| rc = down_write_trylock(&wil->mem_lock); |
| if (!rc) { |
| wil_err(wil, |
| "device is busy. down_write_trylock failed, returned (0x%x)\n", |
| rc); |
| wil->suspend_stats.rejected_by_host++; |
| return -EBUSY; |
| } |
| |
| set_bit(wil_status_suspending, wil->status); |
| up_write(&wil->mem_lock); |
| |
| wil_pm_stop_all_net_queues(wil); |
| |
| if (!wil_is_tx_idle(wil)) { |
| wil_dbg_pm(wil, "Pending TX data, reject suspend\n"); |
| wil->suspend_stats.rejected_by_host++; |
| goto reject_suspend; |
| } |
| |
| if (!wil->txrx_ops.is_rx_idle(wil)) { |
| wil_dbg_pm(wil, "Pending RX data, reject suspend\n"); |
| wil->suspend_stats.rejected_by_host++; |
| goto reject_suspend; |
| } |
| |
| if (!wil_is_wmi_idle(wil)) { |
| wil_dbg_pm(wil, "Pending WMI events, reject suspend\n"); |
| wil->suspend_stats.rejected_by_host++; |
| goto reject_suspend; |
| } |
| |
| /* Send WMI suspend request to the device */ |
| rc = wmi_suspend(wil); |
| if (rc) { |
| wil_dbg_pm(wil, "wmi_suspend failed, reject suspend (%d)\n", |
| rc); |
| goto reject_suspend; |
| } |
| |
| /* Wait for completion of the pending RX packets */ |
| data_comp_to = jiffies + msecs_to_jiffies(WIL_DATA_COMPLETION_TO_MS); |
| if (test_bit(wil_status_napi_en, wil->status)) { |
| while (!wil->txrx_ops.is_rx_idle(wil)) { |
| if (time_after(jiffies, data_comp_to)) { |
| if (wil->txrx_ops.is_rx_idle(wil)) |
| break; |
| wil_err(wil, |
| "TO waiting for idle RX, suspend failed\n"); |
| wil->suspend_stats.r_on.failed_suspends++; |
| goto resume_after_fail; |
| } |
| wil_dbg_ratelimited(wil, "rx vring is not empty -> NAPI\n"); |
| napi_synchronize(&wil->napi_rx); |
| msleep(20); |
| } |
| } |
| |
| /* In case of pending WMI events, reject the suspend |
| * and resume the device. |
| * This can happen if the device sent the WMI events before |
| * approving the suspend. |
| */ |
| if (!wil_is_wmi_idle(wil)) { |
| wil_err(wil, "suspend failed due to pending WMI events\n"); |
| wil->suspend_stats.r_on.failed_suspends++; |
| goto resume_after_fail; |
| } |
| |
| wil_mask_irq(wil); |
| |
| /* Disable device reset on PERST */ |
| wil_s(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); |
| |
| if (wil->platform_ops.suspend) { |
| rc = wil->platform_ops.suspend(wil->platform_handle, true); |
| if (rc) { |
| wil_err(wil, "platform device failed to suspend (%d)\n", |
| rc); |
| wil->suspend_stats.r_on.failed_suspends++; |
| wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); |
| wil_unmask_irq(wil); |
| goto resume_after_fail; |
| } |
| } |
| |
| /* Save the current bus request to return to the same in resume */ |
| wil->bus_request_kbps_pre_suspend = wil->bus_request_kbps; |
| wil6210_bus_request(wil, 0); |
| |
| set_bit(wil_status_suspended, wil->status); |
| clear_bit(wil_status_suspending, wil->status); |
| |
| return rc; |
| |
| resume_after_fail: |
| set_bit(wil_status_resuming, wil->status); |
| clear_bit(wil_status_suspending, wil->status); |
| rc = wmi_resume(wil); |
| /* if resume succeeded, reject the suspend */ |
| if (!rc) { |
| rc = -EBUSY; |
| wil_pm_wake_connected_net_queues(wil); |
| } |
| return rc; |
| |
| reject_suspend: |
| clear_bit(wil_status_suspending, wil->status); |
| wil_pm_wake_connected_net_queues(wil); |
| return -EBUSY; |
| } |
| |
| static int wil_suspend_radio_off(struct wil6210_priv *wil) |
| { |
| int rc = 0; |
| bool active_ifaces; |
| |
| wil_dbg_pm(wil, "suspend radio off\n"); |
| |
| rc = down_write_trylock(&wil->mem_lock); |
| if (!rc) { |
| wil_err(wil, |
| "device is busy. down_write_trylock failed, returned (0x%x)\n", |
| rc); |
| wil->suspend_stats.rejected_by_host++; |
| return -EBUSY; |
| } |
| |
| set_bit(wil_status_suspending, wil->status); |
| up_write(&wil->mem_lock); |
| |
| /* if netif up, hardware is alive, shut it down */ |
| mutex_lock(&wil->vif_mutex); |
| active_ifaces = wil_has_active_ifaces(wil, true, false); |
| mutex_unlock(&wil->vif_mutex); |
| |
| if (active_ifaces) { |
| rc = wil_down(wil); |
| if (rc) { |
| wil_err(wil, "wil_down : %d\n", rc); |
| wil->suspend_stats.r_off.failed_suspends++; |
| goto out; |
| } |
| } |
| |
| /* Disable PCIe IRQ to prevent sporadic IRQs when PCIe is suspending */ |
| wil_dbg_pm(wil, "Disabling PCIe IRQ before suspending\n"); |
| wil_disable_irq(wil); |
| |
| if (wil->platform_ops.suspend) { |
| rc = wil->platform_ops.suspend(wil->platform_handle, false); |
| if (rc) { |
| wil_enable_irq(wil); |
| wil->suspend_stats.r_off.failed_suspends++; |
| goto out; |
| } |
| } |
| |
| set_bit(wil_status_suspended, wil->status); |
| |
| out: |
| clear_bit(wil_status_suspending, wil->status); |
| wil_dbg_pm(wil, "suspend radio off: %d\n", rc); |
| |
| return rc; |
| } |
| |
| static int wil_resume_radio_off(struct wil6210_priv *wil) |
| { |
| int rc = 0; |
| bool active_ifaces; |
| |
| wil_dbg_pm(wil, "Enabling PCIe IRQ\n"); |
| wil_enable_irq(wil); |
| /* if any netif up, bring hardware up |
| * During open(), IFF_UP set after actual device method |
| * invocation. This prevent recursive call to wil_up() |
| * wil_status_suspended will be cleared in wil_reset |
| */ |
| mutex_lock(&wil->vif_mutex); |
| active_ifaces = wil_has_active_ifaces(wil, true, false); |
| mutex_unlock(&wil->vif_mutex); |
| if (active_ifaces) |
| rc = wil_up(wil); |
| else |
| clear_bit(wil_status_suspended, wil->status); |
| |
| return rc; |
| } |
| |
| int wil_suspend(struct wil6210_priv *wil, bool is_runtime, bool keep_radio_on) |
| { |
| int rc = 0; |
| |
| wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system"); |
| |
| if (test_bit(wil_status_suspended, wil->status)) { |
| wil_dbg_pm(wil, "trying to suspend while suspended\n"); |
| return 0; |
| } |
| |
| if (!keep_radio_on) |
| rc = wil_suspend_radio_off(wil); |
| else |
| rc = wil_suspend_keep_radio_on(wil); |
| |
| wil_dbg_pm(wil, "suspend: %s => %d\n", |
| is_runtime ? "runtime" : "system", rc); |
| |
| return rc; |
| } |
| |
| int wil_resume(struct wil6210_priv *wil, bool is_runtime, bool keep_radio_on) |
| { |
| int rc = 0; |
| |
| wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system"); |
| |
| if (wil->platform_ops.resume) { |
| rc = wil->platform_ops.resume(wil->platform_handle, |
| keep_radio_on); |
| if (rc) { |
| wil_err(wil, "platform_ops.resume : %d\n", rc); |
| goto out; |
| } |
| } |
| |
| if (keep_radio_on) |
| rc = wil_resume_keep_radio_on(wil); |
| else |
| rc = wil_resume_radio_off(wil); |
| |
| out: |
| wil_dbg_pm(wil, "resume: %s => %d\n", is_runtime ? "runtime" : "system", |
| rc); |
| return rc; |
| } |
| |
| void wil_pm_runtime_allow(struct wil6210_priv *wil) |
| { |
| struct device *dev = wil_to_dev(wil); |
| |
| pm_runtime_put_noidle(dev); |
| pm_runtime_set_autosuspend_delay(dev, WIL6210_AUTOSUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(dev); |
| pm_runtime_allow(dev); |
| } |
| |
| void wil_pm_runtime_forbid(struct wil6210_priv *wil) |
| { |
| struct device *dev = wil_to_dev(wil); |
| |
| pm_runtime_forbid(dev); |
| pm_runtime_get_noresume(dev); |
| } |
| |
| int wil_pm_runtime_get(struct wil6210_priv *wil) |
| { |
| int rc; |
| struct device *dev = wil_to_dev(wil); |
| |
| rc = pm_runtime_resume_and_get(dev); |
| if (rc < 0) { |
| wil_err(wil, "pm_runtime_resume_and_get() failed, rc = %d\n", rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| void wil_pm_runtime_put(struct wil6210_priv *wil) |
| { |
| struct device *dev = wil_to_dev(wil); |
| |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_put_autosuspend(dev); |
| } |