| // SPDX-License-Identifier: GPL-2.0-only |
| // Copyright (c) 2021 Intel Corporation |
| |
| #include <linux/auxiliary_bus.h> |
| #include <linux/module.h> |
| #include <linux/peci.h> |
| #include <linux/peci-cpu.h> |
| #include <linux/slab.h> |
| |
| #include "internal.h" |
| |
| /** |
| * peci_temp_read() - read the maximum die temperature from PECI target device |
| * @device: PECI device to which request is going to be sent |
| * @temp_raw: where to store the read temperature |
| * |
| * It uses GetTemp PECI command. |
| * |
| * Return: 0 if succeeded, other values in case errors. |
| */ |
| int peci_temp_read(struct peci_device *device, s16 *temp_raw) |
| { |
| struct peci_request *req; |
| |
| req = peci_xfer_get_temp(device); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| *temp_raw = peci_request_temp_read(req); |
| |
| peci_request_free(req); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(peci_temp_read, PECI_CPU); |
| |
| /** |
| * peci_pcs_read() - read PCS register |
| * @device: PECI device to which request is going to be sent |
| * @index: PCS index |
| * @param: PCS parameter |
| * @data: where to store the read data |
| * |
| * It uses RdPkgConfig PECI command. |
| * |
| * Return: 0 if succeeded, other values in case errors. |
| */ |
| int peci_pcs_read(struct peci_device *device, u8 index, u16 param, u32 *data) |
| { |
| struct peci_request *req; |
| int ret; |
| |
| req = peci_xfer_pkg_cfg_readl(device, index, param); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| ret = peci_request_status(req); |
| if (ret) |
| goto out_req_free; |
| |
| *data = peci_request_data_readl(req); |
| out_req_free: |
| peci_request_free(req); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_NS_GPL(peci_pcs_read, PECI_CPU); |
| |
| /** |
| * peci_pci_local_read() - read 32-bit memory location using raw address |
| * @device: PECI device to which request is going to be sent |
| * @bus: bus |
| * @dev: device |
| * @func: function |
| * @reg: register |
| * @data: where to store the read data |
| * |
| * It uses RdPCIConfigLocal PECI command. |
| * |
| * Return: 0 if succeeded, other values in case errors. |
| */ |
| int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev, u8 func, |
| u16 reg, u32 *data) |
| { |
| struct peci_request *req; |
| int ret; |
| |
| req = peci_xfer_pci_cfg_local_readl(device, bus, dev, func, reg); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| ret = peci_request_status(req); |
| if (ret) |
| goto out_req_free; |
| |
| *data = peci_request_data_readl(req); |
| out_req_free: |
| peci_request_free(req); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_NS_GPL(peci_pci_local_read, PECI_CPU); |
| |
| /** |
| * peci_ep_pci_local_read() - read 32-bit memory location using raw address |
| * @device: PECI device to which request is going to be sent |
| * @seg: PCI segment |
| * @bus: bus |
| * @dev: device |
| * @func: function |
| * @reg: register |
| * @data: where to store the read data |
| * |
| * Like &peci_pci_local_read, but it uses RdEndpointConfig PECI command. |
| * |
| * Return: 0 if succeeded, other values in case errors. |
| */ |
| int peci_ep_pci_local_read(struct peci_device *device, u8 seg, |
| u8 bus, u8 dev, u8 func, u16 reg, u32 *data) |
| { |
| struct peci_request *req; |
| int ret; |
| |
| req = peci_xfer_ep_pci_cfg_local_readl(device, seg, bus, dev, func, reg); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| ret = peci_request_status(req); |
| if (ret) |
| goto out_req_free; |
| |
| *data = peci_request_data_readl(req); |
| out_req_free: |
| peci_request_free(req); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_NS_GPL(peci_ep_pci_local_read, PECI_CPU); |
| |
| /** |
| * peci_mmio_read() - read 32-bit memory location using 64-bit bar offset address |
| * @device: PECI device to which request is going to be sent |
| * @bar: PCI bar |
| * @seg: PCI segment |
| * @bus: bus |
| * @dev: device |
| * @func: function |
| * @address: 64-bit MMIO address |
| * @data: where to store the read data |
| * |
| * It uses RdEndpointConfig PECI command. |
| * |
| * Return: 0 if succeeded, other values in case errors. |
| */ |
| int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg, |
| u8 bus, u8 dev, u8 func, u64 address, u32 *data) |
| { |
| struct peci_request *req; |
| int ret; |
| |
| req = peci_xfer_ep_mmio64_readl(device, bar, seg, bus, dev, func, address); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| ret = peci_request_status(req); |
| if (ret) |
| goto out_req_free; |
| |
| *data = peci_request_data_readl(req); |
| out_req_free: |
| peci_request_free(req); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_NS_GPL(peci_mmio_read, PECI_CPU); |
| |
| static const char * const peci_adev_types[] = { |
| "cputemp", |
| "dimmtemp", |
| }; |
| |
| struct peci_cpu { |
| struct peci_device *device; |
| const struct peci_device_id *id; |
| }; |
| |
| static void adev_release(struct device *dev) |
| { |
| struct auxiliary_device *adev = to_auxiliary_dev(dev); |
| |
| kfree(adev->name); |
| kfree(adev); |
| } |
| |
| static struct auxiliary_device *adev_alloc(struct peci_cpu *priv, int idx) |
| { |
| struct peci_controller *controller = to_peci_controller(priv->device->dev.parent); |
| struct auxiliary_device *adev; |
| const char *name; |
| int ret; |
| |
| adev = kzalloc(sizeof(*adev), GFP_KERNEL); |
| if (!adev) |
| return ERR_PTR(-ENOMEM); |
| |
| name = kasprintf(GFP_KERNEL, "%s.%s", peci_adev_types[idx], (const char *)priv->id->data); |
| if (!name) { |
| ret = -ENOMEM; |
| goto free_adev; |
| } |
| |
| adev->name = name; |
| adev->dev.parent = &priv->device->dev; |
| adev->dev.release = adev_release; |
| adev->id = (controller->id << 16) | (priv->device->addr); |
| |
| ret = auxiliary_device_init(adev); |
| if (ret) |
| goto free_name; |
| |
| return adev; |
| |
| free_name: |
| kfree(name); |
| free_adev: |
| kfree(adev); |
| return ERR_PTR(ret); |
| } |
| |
| static void unregister_adev(void *_adev) |
| { |
| struct auxiliary_device *adev = _adev; |
| |
| auxiliary_device_delete(adev); |
| auxiliary_device_uninit(adev); |
| } |
| |
| static int devm_adev_add(struct device *dev, int idx) |
| { |
| struct peci_cpu *priv = dev_get_drvdata(dev); |
| struct auxiliary_device *adev; |
| int ret; |
| |
| adev = adev_alloc(priv, idx); |
| if (IS_ERR(adev)) |
| return PTR_ERR(adev); |
| |
| ret = auxiliary_device_add(adev); |
| if (ret) { |
| auxiliary_device_uninit(adev); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(&priv->device->dev, unregister_adev, adev); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void peci_cpu_add_adevices(struct peci_cpu *priv) |
| { |
| struct device *dev = &priv->device->dev; |
| int ret, i; |
| |
| for (i = 0; i < ARRAY_SIZE(peci_adev_types); i++) { |
| ret = devm_adev_add(dev, i); |
| if (ret) { |
| dev_warn(dev, "Failed to register PECI auxiliary: %s, ret = %d\n", |
| peci_adev_types[i], ret); |
| continue; |
| } |
| } |
| } |
| |
| static int |
| peci_cpu_probe(struct peci_device *device, const struct peci_device_id *id) |
| { |
| struct device *dev = &device->dev; |
| struct peci_cpu *priv; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, priv); |
| priv->device = device; |
| priv->id = id; |
| |
| peci_cpu_add_adevices(priv); |
| |
| return 0; |
| } |
| |
| static const struct peci_device_id peci_cpu_device_ids[] = { |
| { /* Haswell Xeon */ |
| .x86_vfm = INTEL_HASWELL_X, |
| .data = "hsx", |
| }, |
| { /* Broadwell Xeon */ |
| .x86_vfm = INTEL_BROADWELL_X, |
| .data = "bdx", |
| }, |
| { /* Broadwell Xeon D */ |
| .x86_vfm = INTEL_BROADWELL_D, |
| .data = "bdxd", |
| }, |
| { /* Skylake Xeon */ |
| .x86_vfm = INTEL_SKYLAKE_X, |
| .data = "skx", |
| }, |
| { /* Icelake Xeon */ |
| .x86_vfm = INTEL_ICELAKE_X, |
| .data = "icx", |
| }, |
| { /* Icelake Xeon D */ |
| .x86_vfm = INTEL_ICELAKE_D, |
| .data = "icxd", |
| }, |
| { /* Sapphire Rapids Xeon */ |
| .x86_vfm = INTEL_SAPPHIRERAPIDS_X, |
| .data = "spr", |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids); |
| |
| static struct peci_driver peci_cpu_driver = { |
| .probe = peci_cpu_probe, |
| .id_table = peci_cpu_device_ids, |
| .driver = { |
| .name = "peci-cpu", |
| }, |
| }; |
| module_peci_driver(peci_cpu_driver); |
| |
| MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>"); |
| MODULE_DESCRIPTION("PECI CPU driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PECI); |