| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * IBM Real-Time Linux driver |
| * |
| * Copyright (C) IBM Corporation, 2010 |
| * |
| * Author: Keith Mannthey <kmannth@us.ibm.com> |
| * Vernon Mauery <vernux@us.ibm.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/dmi.h> |
| #include <linux/efi.h> |
| #include <linux/mutex.h> |
| #include <asm/bios_ebda.h> |
| |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| |
| static bool force; |
| module_param(force, bool, 0); |
| MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); |
| |
| static bool debug; |
| module_param(debug, bool, 0644); |
| MODULE_PARM_DESC(debug, "Show debug output"); |
| |
| MODULE_DESCRIPTION("IBM Premium Real Time Mode (PRTM) driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Keith Mannthey <kmmanth@us.ibm.com>"); |
| MODULE_AUTHOR("Vernon Mauery <vernux@us.ibm.com>"); |
| |
| #define RTL_ADDR_TYPE_IO 1 |
| #define RTL_ADDR_TYPE_MMIO 2 |
| |
| #define RTL_CMD_ENTER_PRTM 1 |
| #define RTL_CMD_EXIT_PRTM 2 |
| |
| /* The RTL table as presented by the EBDA: */ |
| struct ibm_rtl_table { |
| char signature[5]; /* signature should be "_RTL_" */ |
| u8 version; |
| u8 rt_status; |
| u8 command; |
| u8 command_status; |
| u8 cmd_address_type; |
| u8 cmd_granularity; |
| u8 cmd_offset; |
| u16 reserve1; |
| u32 cmd_port_address; /* platform dependent address */ |
| u32 cmd_port_value; /* platform dependent value */ |
| } __attribute__((packed)); |
| |
| /* to locate "_RTL_" signature do a masked 5-byte integer compare */ |
| #define RTL_SIGNATURE 0x0000005f4c54525fULL |
| #define RTL_MASK 0x000000ffffffffffULL |
| |
| #define RTL_DEBUG(fmt, ...) \ |
| do { \ |
| if (debug) \ |
| pr_info(fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| static DEFINE_MUTEX(rtl_lock); |
| static struct ibm_rtl_table __iomem *rtl_table; |
| static void __iomem *ebda_map; |
| static void __iomem *rtl_cmd_addr; |
| static u8 rtl_cmd_type; |
| static u8 rtl_cmd_width; |
| |
| static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len) |
| { |
| if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO) |
| return ioremap(addr, len); |
| return ioport_map(addr, len); |
| } |
| |
| static void rtl_port_unmap(void __iomem *addr) |
| { |
| if (addr && rtl_cmd_type == RTL_ADDR_TYPE_MMIO) |
| iounmap(addr); |
| else |
| ioport_unmap(addr); |
| } |
| |
| static int ibm_rtl_write(u8 value) |
| { |
| int ret = 0, count = 0; |
| u32 cmd_port_val; |
| |
| RTL_DEBUG("%s(%d)\n", __func__, value); |
| |
| value = value == 1 ? RTL_CMD_ENTER_PRTM : RTL_CMD_EXIT_PRTM; |
| |
| mutex_lock(&rtl_lock); |
| |
| if (ioread8(&rtl_table->rt_status) != value) { |
| iowrite8(value, &rtl_table->command); |
| |
| switch (rtl_cmd_width) { |
| case 8: |
| cmd_port_val = ioread8(&rtl_table->cmd_port_value); |
| RTL_DEBUG("cmd_port_val = %u\n", cmd_port_val); |
| iowrite8((u8)cmd_port_val, rtl_cmd_addr); |
| break; |
| case 16: |
| cmd_port_val = ioread16(&rtl_table->cmd_port_value); |
| RTL_DEBUG("cmd_port_val = %u\n", cmd_port_val); |
| iowrite16((u16)cmd_port_val, rtl_cmd_addr); |
| break; |
| case 32: |
| cmd_port_val = ioread32(&rtl_table->cmd_port_value); |
| RTL_DEBUG("cmd_port_val = %u\n", cmd_port_val); |
| iowrite32(cmd_port_val, rtl_cmd_addr); |
| break; |
| } |
| |
| while (ioread8(&rtl_table->command)) { |
| msleep(10); |
| if (count++ > 500) { |
| pr_err("Hardware not responding to " |
| "mode switch request\n"); |
| ret = -EIO; |
| break; |
| } |
| |
| } |
| |
| if (ioread8(&rtl_table->command_status)) { |
| RTL_DEBUG("command_status reports failed command\n"); |
| ret = -EIO; |
| } |
| } |
| |
| mutex_unlock(&rtl_lock); |
| return ret; |
| } |
| |
| static ssize_t rtl_show_version(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%d\n", (int)ioread8(&rtl_table->version)); |
| } |
| |
| static ssize_t rtl_show_state(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%d\n", ioread8(&rtl_table->rt_status)); |
| } |
| |
| static ssize_t rtl_set_state(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t count) |
| { |
| ssize_t ret; |
| |
| if (count < 1 || count > 2) |
| return -EINVAL; |
| |
| switch (buf[0]) { |
| case '0': |
| ret = ibm_rtl_write(0); |
| break; |
| case '1': |
| ret = ibm_rtl_write(1); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| if (ret >= 0) |
| ret = count; |
| |
| return ret; |
| } |
| |
| static const struct bus_type rtl_subsys = { |
| .name = "ibm_rtl", |
| .dev_name = "ibm_rtl", |
| }; |
| |
| static DEVICE_ATTR(version, S_IRUGO, rtl_show_version, NULL); |
| static DEVICE_ATTR(state, 0600, rtl_show_state, rtl_set_state); |
| |
| static struct device_attribute *rtl_attributes[] = { |
| &dev_attr_version, |
| &dev_attr_state, |
| NULL |
| }; |
| |
| |
| static int rtl_setup_sysfs(void) { |
| int ret, i; |
| |
| ret = subsys_system_register(&rtl_subsys, NULL); |
| if (!ret) { |
| struct device *dev_root = bus_get_dev_root(&rtl_subsys); |
| |
| if (dev_root) { |
| for (i = 0; rtl_attributes[i]; i ++) |
| device_create_file(dev_root, rtl_attributes[i]); |
| put_device(dev_root); |
| } |
| } |
| return ret; |
| } |
| |
| static void rtl_teardown_sysfs(void) { |
| struct device *dev_root = bus_get_dev_root(&rtl_subsys); |
| int i; |
| |
| if (dev_root) { |
| for (i = 0; rtl_attributes[i]; i ++) |
| device_remove_file(dev_root, rtl_attributes[i]); |
| put_device(dev_root); |
| } |
| bus_unregister(&rtl_subsys); |
| } |
| |
| |
| static const struct dmi_system_id ibm_rtl_dmi_table[] __initconst = { |
| { \ |
| .matches = { \ |
| DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \ |
| }, \ |
| }, |
| { } |
| }; |
| |
| static int __init ibm_rtl_init(void) { |
| unsigned long ebda_addr, ebda_size; |
| unsigned int ebda_kb; |
| int ret = -ENODEV, i; |
| |
| if (force) |
| pr_warn("module loaded by force\n"); |
| /* first ensure that we are running on IBM HW */ |
| else if (efi_enabled(EFI_BOOT) || !dmi_check_system(ibm_rtl_dmi_table)) |
| return -ENODEV; |
| |
| /* Get the address for the Extended BIOS Data Area */ |
| ebda_addr = get_bios_ebda(); |
| if (!ebda_addr) { |
| RTL_DEBUG("no BIOS EBDA found\n"); |
| return -ENODEV; |
| } |
| |
| ebda_map = ioremap(ebda_addr, 4); |
| if (!ebda_map) |
| return -ENOMEM; |
| |
| /* First word in the EDBA is the Size in KB */ |
| ebda_kb = ioread16(ebda_map); |
| RTL_DEBUG("EBDA is %d kB\n", ebda_kb); |
| |
| if (ebda_kb == 0) |
| goto out; |
| |
| iounmap(ebda_map); |
| ebda_size = ebda_kb*1024; |
| |
| /* Remap the whole table */ |
| ebda_map = ioremap(ebda_addr, ebda_size); |
| if (!ebda_map) |
| return -ENOMEM; |
| |
| /* search for the _RTL_ signature at the start of the table */ |
| for (i = 0 ; i < ebda_size/sizeof(unsigned int); i++) { |
| struct ibm_rtl_table __iomem * tmp; |
| tmp = (struct ibm_rtl_table __iomem *) (ebda_map+i); |
| if ((readq(&tmp->signature) & RTL_MASK) == RTL_SIGNATURE) { |
| phys_addr_t addr; |
| unsigned int plen; |
| RTL_DEBUG("found RTL_SIGNATURE at %p\n", tmp); |
| rtl_table = tmp; |
| /* The address, value, width and offset are platform |
| * dependent and found in the ibm_rtl_table */ |
| rtl_cmd_width = ioread8(&rtl_table->cmd_granularity); |
| rtl_cmd_type = ioread8(&rtl_table->cmd_address_type); |
| RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n", |
| rtl_cmd_width, rtl_cmd_type); |
| addr = ioread32(&rtl_table->cmd_port_address); |
| RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr); |
| plen = rtl_cmd_width/sizeof(char); |
| rtl_cmd_addr = rtl_port_map(addr, plen); |
| RTL_DEBUG("rtl_cmd_addr = %p\n", rtl_cmd_addr); |
| if (!rtl_cmd_addr) { |
| ret = -ENOMEM; |
| break; |
| } |
| ret = rtl_setup_sysfs(); |
| break; |
| } |
| } |
| |
| out: |
| if (ret) { |
| iounmap(ebda_map); |
| rtl_port_unmap(rtl_cmd_addr); |
| } |
| |
| return ret; |
| } |
| |
| static void __exit ibm_rtl_exit(void) |
| { |
| if (rtl_table) { |
| RTL_DEBUG("cleaning up"); |
| /* do not leave the machine in SMI-free mode */ |
| ibm_rtl_write(0); |
| /* unmap, unlink and remove all traces */ |
| rtl_teardown_sysfs(); |
| iounmap(ebda_map); |
| rtl_port_unmap(rtl_cmd_addr); |
| } |
| } |
| |
| module_init(ibm_rtl_init); |
| module_exit(ibm_rtl_exit); |