| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver |
| * |
| * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com> |
| * |
| * Notes |
| * ===== |
| * NXP LPC18xx provides a State Configurable Timer (SCT) which can be configured |
| * as a Pulse Width Modulator. |
| * |
| * SCT supports 16 outputs, 16 events and 16 registers. Each event will be |
| * triggered when its related register matches the SCT counter value, and it |
| * will set or clear a selected output. |
| * |
| * One of the events is preselected to generate the period, thus the maximum |
| * number of simultaneous channels is limited to 15. Notice that period is |
| * global to all the channels, thus PWM driver will refuse setting different |
| * values to it, unless there's only one channel requested. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| /* LPC18xx SCT registers */ |
| #define LPC18XX_PWM_CONFIG 0x000 |
| #define LPC18XX_PWM_CONFIG_UNIFY BIT(0) |
| #define LPC18XX_PWM_CONFIG_NORELOAD BIT(7) |
| |
| #define LPC18XX_PWM_CTRL 0x004 |
| #define LPC18XX_PWM_CTRL_HALT BIT(2) |
| #define LPC18XX_PWM_BIDIR BIT(4) |
| #define LPC18XX_PWM_PRE_SHIFT 5 |
| #define LPC18XX_PWM_PRE_MASK (0xff << LPC18XX_PWM_PRE_SHIFT) |
| #define LPC18XX_PWM_PRE(x) (x << LPC18XX_PWM_PRE_SHIFT) |
| |
| #define LPC18XX_PWM_LIMIT 0x008 |
| |
| #define LPC18XX_PWM_RES_BASE 0x058 |
| #define LPC18XX_PWM_RES_SHIFT(_ch) (_ch * 2) |
| #define LPC18XX_PWM_RES(_ch, _action) (_action << LPC18XX_PWM_RES_SHIFT(_ch)) |
| #define LPC18XX_PWM_RES_MASK(_ch) (0x3 << LPC18XX_PWM_RES_SHIFT(_ch)) |
| |
| #define LPC18XX_PWM_MATCH_BASE 0x100 |
| #define LPC18XX_PWM_MATCH(_ch) (LPC18XX_PWM_MATCH_BASE + _ch * 4) |
| |
| #define LPC18XX_PWM_MATCHREL_BASE 0x200 |
| #define LPC18XX_PWM_MATCHREL(_ch) (LPC18XX_PWM_MATCHREL_BASE + _ch * 4) |
| |
| #define LPC18XX_PWM_EVSTATEMSK_BASE 0x300 |
| #define LPC18XX_PWM_EVSTATEMSK(_ch) (LPC18XX_PWM_EVSTATEMSK_BASE + _ch * 8) |
| #define LPC18XX_PWM_EVSTATEMSK_ALL 0xffffffff |
| |
| #define LPC18XX_PWM_EVCTRL_BASE 0x304 |
| #define LPC18XX_PWM_EVCTRL(_ev) (LPC18XX_PWM_EVCTRL_BASE + _ev * 8) |
| |
| #define LPC18XX_PWM_EVCTRL_MATCH(_ch) _ch |
| |
| #define LPC18XX_PWM_EVCTRL_COMB_SHIFT 12 |
| #define LPC18XX_PWM_EVCTRL_COMB_MATCH (0x1 << LPC18XX_PWM_EVCTRL_COMB_SHIFT) |
| |
| #define LPC18XX_PWM_OUTPUTSET_BASE 0x500 |
| #define LPC18XX_PWM_OUTPUTSET(_ch) (LPC18XX_PWM_OUTPUTSET_BASE + _ch * 8) |
| |
| #define LPC18XX_PWM_OUTPUTCL_BASE 0x504 |
| #define LPC18XX_PWM_OUTPUTCL(_ch) (LPC18XX_PWM_OUTPUTCL_BASE + _ch * 8) |
| |
| /* LPC18xx SCT unified counter */ |
| #define LPC18XX_PWM_TIMER_MAX 0xffffffff |
| |
| /* LPC18xx SCT events */ |
| #define LPC18XX_PWM_EVENT_PERIOD 0 |
| #define LPC18XX_PWM_EVENT_MAX 16 |
| |
| #define LPC18XX_NUM_PWMS 16 |
| |
| /* SCT conflict resolution */ |
| enum lpc18xx_pwm_res_action { |
| LPC18XX_PWM_RES_NONE, |
| LPC18XX_PWM_RES_SET, |
| LPC18XX_PWM_RES_CLEAR, |
| LPC18XX_PWM_RES_TOGGLE, |
| }; |
| |
| struct lpc18xx_pwm_data { |
| unsigned int duty_event; |
| }; |
| |
| struct lpc18xx_pwm_chip { |
| void __iomem *base; |
| struct clk *pwm_clk; |
| unsigned long clk_rate; |
| unsigned int period_ns; |
| unsigned int min_period_ns; |
| u64 max_period_ns; |
| unsigned int period_event; |
| unsigned long event_map; |
| struct mutex res_lock; |
| struct mutex period_lock; |
| struct lpc18xx_pwm_data channeldata[LPC18XX_NUM_PWMS]; |
| }; |
| |
| static inline struct lpc18xx_pwm_chip * |
| to_lpc18xx_pwm_chip(struct pwm_chip *chip) |
| { |
| return pwmchip_get_drvdata(chip); |
| } |
| |
| static inline void lpc18xx_pwm_writel(struct lpc18xx_pwm_chip *lpc18xx_pwm, |
| u32 reg, u32 val) |
| { |
| writel(val, lpc18xx_pwm->base + reg); |
| } |
| |
| static inline u32 lpc18xx_pwm_readl(struct lpc18xx_pwm_chip *lpc18xx_pwm, |
| u32 reg) |
| { |
| return readl(lpc18xx_pwm->base + reg); |
| } |
| |
| static void lpc18xx_pwm_set_conflict_res(struct lpc18xx_pwm_chip *lpc18xx_pwm, |
| struct pwm_device *pwm, |
| enum lpc18xx_pwm_res_action action) |
| { |
| u32 val; |
| |
| mutex_lock(&lpc18xx_pwm->res_lock); |
| |
| /* |
| * Simultaneous set and clear may happen on an output, that is the case |
| * when duty_ns == period_ns. LPC18xx SCT allows to set a conflict |
| * resolution action to be taken in such a case. |
| */ |
| val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_RES_BASE); |
| val &= ~LPC18XX_PWM_RES_MASK(pwm->hwpwm); |
| val |= LPC18XX_PWM_RES(pwm->hwpwm, action); |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_RES_BASE, val); |
| |
| mutex_unlock(&lpc18xx_pwm->res_lock); |
| } |
| |
| static void lpc18xx_pwm_config_period(struct pwm_chip *chip, u64 period_ns) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| u32 val; |
| |
| /* |
| * With clk_rate < NSEC_PER_SEC this cannot overflow. |
| * With period_ns < max_period_ns this also fits into an u32. |
| * As period_ns >= min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, lpc18xx_pwm->clk_rate); |
| * we have val >= 1. |
| */ |
| val = mul_u64_u64_div_u64(period_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC); |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_MATCH(lpc18xx_pwm->period_event), |
| val - 1); |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_MATCHREL(lpc18xx_pwm->period_event), |
| val - 1); |
| } |
| |
| static void lpc18xx_pwm_config_duty(struct pwm_chip *chip, |
| struct pwm_device *pwm, u64 duty_ns) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm]; |
| u32 val; |
| |
| /* |
| * With clk_rate <= NSEC_PER_SEC this cannot overflow. |
| * With duty_ns <= period_ns < max_period_ns this also fits into an u32. |
| */ |
| val = mul_u64_u64_div_u64(duty_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC); |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_MATCH(lpc18xx_data->duty_event), |
| val); |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_MATCHREL(lpc18xx_data->duty_event), |
| val); |
| } |
| |
| static int lpc18xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| int requested_events; |
| |
| if (period_ns < lpc18xx_pwm->min_period_ns || |
| period_ns > lpc18xx_pwm->max_period_ns) { |
| dev_err(pwmchip_parent(chip), "period %d not in range\n", period_ns); |
| return -ERANGE; |
| } |
| |
| mutex_lock(&lpc18xx_pwm->period_lock); |
| |
| requested_events = bitmap_weight(&lpc18xx_pwm->event_map, |
| LPC18XX_PWM_EVENT_MAX); |
| |
| /* |
| * The PWM supports only a single period for all PWM channels. |
| * Once the period is set, it can only be changed if no more than one |
| * channel is requested at that moment. |
| */ |
| if (requested_events > 2 && lpc18xx_pwm->period_ns != period_ns && |
| lpc18xx_pwm->period_ns) { |
| dev_err(pwmchip_parent(chip), "conflicting period requested for PWM %u\n", |
| pwm->hwpwm); |
| mutex_unlock(&lpc18xx_pwm->period_lock); |
| return -EBUSY; |
| } |
| |
| if ((requested_events <= 2 && lpc18xx_pwm->period_ns != period_ns) || |
| !lpc18xx_pwm->period_ns) { |
| lpc18xx_pwm->period_ns = period_ns; |
| lpc18xx_pwm_config_period(chip, period_ns); |
| } |
| |
| mutex_unlock(&lpc18xx_pwm->period_lock); |
| |
| lpc18xx_pwm_config_duty(chip, pwm, duty_ns); |
| |
| return 0; |
| } |
| |
| static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm, enum pwm_polarity polarity) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm]; |
| enum lpc18xx_pwm_res_action res_action; |
| unsigned int set_event, clear_event; |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event), |
| LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_data->duty_event) | |
| LPC18XX_PWM_EVCTRL_COMB_MATCH); |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event), |
| LPC18XX_PWM_EVSTATEMSK_ALL); |
| |
| if (polarity == PWM_POLARITY_NORMAL) { |
| set_event = lpc18xx_pwm->period_event; |
| clear_event = lpc18xx_data->duty_event; |
| res_action = LPC18XX_PWM_RES_SET; |
| } else { |
| set_event = lpc18xx_data->duty_event; |
| clear_event = lpc18xx_pwm->period_event; |
| res_action = LPC18XX_PWM_RES_CLEAR; |
| } |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm), |
| BIT(set_event)); |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm), |
| BIT(clear_event)); |
| lpc18xx_pwm_set_conflict_res(lpc18xx_pwm, pwm, res_action); |
| |
| return 0; |
| } |
| |
| static void lpc18xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm]; |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event), 0); |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm), 0); |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm), 0); |
| } |
| |
| static int lpc18xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm]; |
| unsigned long event; |
| |
| event = find_first_zero_bit(&lpc18xx_pwm->event_map, |
| LPC18XX_PWM_EVENT_MAX); |
| |
| if (event >= LPC18XX_PWM_EVENT_MAX) { |
| dev_err(pwmchip_parent(chip), |
| "maximum number of simultaneous channels reached\n"); |
| return -EBUSY; |
| } |
| |
| set_bit(event, &lpc18xx_pwm->event_map); |
| lpc18xx_data->duty_event = event; |
| |
| return 0; |
| } |
| |
| static void lpc18xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm]; |
| |
| clear_bit(lpc18xx_data->duty_event, &lpc18xx_pwm->event_map); |
| } |
| |
| static int lpc18xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| int err; |
| bool enabled = pwm->state.enabled; |
| |
| if (state->polarity != pwm->state.polarity && pwm->state.enabled) { |
| lpc18xx_pwm_disable(chip, pwm); |
| enabled = false; |
| } |
| |
| if (!state->enabled) { |
| if (enabled) |
| lpc18xx_pwm_disable(chip, pwm); |
| |
| return 0; |
| } |
| |
| err = lpc18xx_pwm_config(chip, pwm, state->duty_cycle, state->period); |
| if (err) |
| return err; |
| |
| if (!enabled) |
| err = lpc18xx_pwm_enable(chip, pwm, state->polarity); |
| |
| return err; |
| } |
| static const struct pwm_ops lpc18xx_pwm_ops = { |
| .apply = lpc18xx_pwm_apply, |
| .request = lpc18xx_pwm_request, |
| .free = lpc18xx_pwm_free, |
| }; |
| |
| static const struct of_device_id lpc18xx_pwm_of_match[] = { |
| { .compatible = "nxp,lpc1850-sct-pwm" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, lpc18xx_pwm_of_match); |
| |
| static int lpc18xx_pwm_probe(struct platform_device *pdev) |
| { |
| struct pwm_chip *chip; |
| struct lpc18xx_pwm_chip *lpc18xx_pwm; |
| int ret; |
| u64 val; |
| |
| chip = devm_pwmchip_alloc(&pdev->dev, LPC18XX_NUM_PWMS, sizeof(*lpc18xx_pwm)); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| |
| lpc18xx_pwm->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(lpc18xx_pwm->base)) |
| return PTR_ERR(lpc18xx_pwm->base); |
| |
| lpc18xx_pwm->pwm_clk = devm_clk_get_enabled(&pdev->dev, "pwm"); |
| if (IS_ERR(lpc18xx_pwm->pwm_clk)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(lpc18xx_pwm->pwm_clk), |
| "failed to get pwm clock\n"); |
| |
| lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk); |
| if (!lpc18xx_pwm->clk_rate) |
| return dev_err_probe(&pdev->dev, |
| -EINVAL, "pwm clock has no frequency\n"); |
| |
| /* |
| * If clkrate is too fast, the calculations in .apply() might overflow. |
| */ |
| if (lpc18xx_pwm->clk_rate > NSEC_PER_SEC) |
| return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock to fast\n"); |
| |
| mutex_init(&lpc18xx_pwm->res_lock); |
| mutex_init(&lpc18xx_pwm->period_lock); |
| |
| lpc18xx_pwm->max_period_ns = |
| mul_u64_u64_div_u64(NSEC_PER_SEC, LPC18XX_PWM_TIMER_MAX, lpc18xx_pwm->clk_rate); |
| |
| lpc18xx_pwm->min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, |
| lpc18xx_pwm->clk_rate); |
| |
| chip->ops = &lpc18xx_pwm_ops; |
| |
| /* SCT counter must be in unify (32 bit) mode */ |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CONFIG, |
| LPC18XX_PWM_CONFIG_UNIFY); |
| |
| /* |
| * Everytime the timer counter reaches the period value, the related |
| * event will be triggered and the counter reset to 0. |
| */ |
| set_bit(LPC18XX_PWM_EVENT_PERIOD, &lpc18xx_pwm->event_map); |
| lpc18xx_pwm->period_event = LPC18XX_PWM_EVENT_PERIOD; |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_EVSTATEMSK(lpc18xx_pwm->period_event), |
| LPC18XX_PWM_EVSTATEMSK_ALL); |
| |
| val = LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_pwm->period_event) | |
| LPC18XX_PWM_EVCTRL_COMB_MATCH; |
| lpc18xx_pwm_writel(lpc18xx_pwm, |
| LPC18XX_PWM_EVCTRL(lpc18xx_pwm->period_event), val); |
| |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT, |
| BIT(lpc18xx_pwm->period_event)); |
| |
| val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL); |
| val &= ~LPC18XX_PWM_BIDIR; |
| val &= ~LPC18XX_PWM_CTRL_HALT; |
| val &= ~LPC18XX_PWM_PRE_MASK; |
| val |= LPC18XX_PWM_PRE(0); |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val); |
| |
| ret = pwmchip_add(chip); |
| if (ret < 0) |
| return dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n"); |
| |
| platform_set_drvdata(pdev, chip); |
| |
| return 0; |
| } |
| |
| static void lpc18xx_pwm_remove(struct platform_device *pdev) |
| { |
| struct pwm_chip *chip = platform_get_drvdata(pdev); |
| struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip); |
| u32 val; |
| |
| pwmchip_remove(chip); |
| |
| val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL); |
| lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, |
| val | LPC18XX_PWM_CTRL_HALT); |
| } |
| |
| static struct platform_driver lpc18xx_pwm_driver = { |
| .driver = { |
| .name = "lpc18xx-sct-pwm", |
| .of_match_table = lpc18xx_pwm_of_match, |
| }, |
| .probe = lpc18xx_pwm_probe, |
| .remove = lpc18xx_pwm_remove, |
| }; |
| module_platform_driver(lpc18xx_pwm_driver); |
| |
| MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>"); |
| MODULE_DESCRIPTION("NXP LPC18xx PWM driver"); |
| MODULE_LICENSE("GPL v2"); |