| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2008 Intel Corp |
| * Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com> |
| * Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com> |
| * Copyright 2022 Linaro Limited |
| * |
| * Thermal trips handling |
| */ |
| #include "thermal_core.h" |
| |
| static const char *trip_type_names[] = { |
| [THERMAL_TRIP_ACTIVE] = "active", |
| [THERMAL_TRIP_PASSIVE] = "passive", |
| [THERMAL_TRIP_HOT] = "hot", |
| [THERMAL_TRIP_CRITICAL] = "critical", |
| }; |
| |
| const char *thermal_trip_type_name(enum thermal_trip_type trip_type) |
| { |
| if (trip_type < THERMAL_TRIP_ACTIVE || trip_type > THERMAL_TRIP_CRITICAL) |
| return "unknown"; |
| |
| return trip_type_names[trip_type]; |
| } |
| |
| int for_each_thermal_trip(struct thermal_zone_device *tz, |
| int (*cb)(struct thermal_trip *, void *), |
| void *data) |
| { |
| struct thermal_trip_desc *td; |
| int ret; |
| |
| for_each_trip_desc(tz, td) { |
| ret = cb(&td->trip, data); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(for_each_thermal_trip); |
| |
| int thermal_zone_for_each_trip(struct thermal_zone_device *tz, |
| int (*cb)(struct thermal_trip *, void *), |
| void *data) |
| { |
| int ret; |
| |
| mutex_lock(&tz->lock); |
| ret = for_each_thermal_trip(tz, cb, data); |
| mutex_unlock(&tz->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(thermal_zone_for_each_trip); |
| |
| void thermal_zone_set_trips(struct thermal_zone_device *tz, int low, int high) |
| { |
| int ret; |
| |
| lockdep_assert_held(&tz->lock); |
| |
| if (!tz->ops.set_trips) |
| return; |
| |
| /* No need to change trip points */ |
| if (tz->prev_low_trip == low && tz->prev_high_trip == high) |
| return; |
| |
| tz->prev_low_trip = low; |
| tz->prev_high_trip = high; |
| |
| dev_dbg(&tz->device, |
| "new temperature boundaries: %d < x < %d\n", low, high); |
| |
| /* |
| * Set a temperature window. When this window is left the driver |
| * must inform the thermal core via thermal_zone_device_update. |
| */ |
| ret = tz->ops.set_trips(tz, low, high); |
| if (ret) |
| dev_err(&tz->device, "Failed to set trips: %d\n", ret); |
| } |
| |
| int thermal_zone_trip_id(const struct thermal_zone_device *tz, |
| const struct thermal_trip *trip) |
| { |
| /* |
| * Assume the trip to be located within the bounds of the thermal |
| * zone's trips[] table. |
| */ |
| return trip_to_trip_desc(trip) - tz->trips; |
| } |
| |
| void thermal_zone_set_trip_hyst(struct thermal_zone_device *tz, |
| struct thermal_trip *trip, int hyst) |
| { |
| WRITE_ONCE(trip->hysteresis, hyst); |
| thermal_notify_tz_trip_change(tz, trip); |
| } |
| |
| void thermal_zone_set_trip_temp(struct thermal_zone_device *tz, |
| struct thermal_trip *trip, int temp) |
| { |
| if (trip->temperature == temp) |
| return; |
| |
| WRITE_ONCE(trip->temperature, temp); |
| thermal_notify_tz_trip_change(tz, trip); |
| |
| if (temp == THERMAL_TEMP_INVALID) { |
| struct thermal_trip_desc *td = trip_to_trip_desc(trip); |
| |
| if (tz->temperature >= td->threshold) { |
| /* |
| * The trip has been crossed on the way up, so some |
| * adjustments are needed to compensate for the lack |
| * of it going forward. |
| */ |
| if (trip->type == THERMAL_TRIP_PASSIVE) { |
| tz->passive--; |
| WARN_ON_ONCE(tz->passive < 0); |
| } |
| thermal_zone_trip_down(tz, trip); |
| } |
| /* |
| * Invalidate the threshold to avoid triggering a spurious |
| * trip crossing notification when the trip becomes valid. |
| */ |
| td->threshold = INT_MAX; |
| } |
| } |
| EXPORT_SYMBOL_GPL(thermal_zone_set_trip_temp); |