| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Cadence USBHS-DEV driver. |
| * |
| * Copyright (C) 2023 Cadence Design Systems. |
| * |
| * Authors: Pawel Laszczak <pawell@cadence.com> |
| */ |
| |
| #include <linux/usb/composite.h> |
| #include <linux/unaligned.h> |
| |
| #include "cdns2-gadget.h" |
| #include "cdns2-trace.h" |
| |
| static struct usb_endpoint_descriptor cdns2_gadget_ep0_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(64) |
| }; |
| |
| static int cdns2_w_index_to_ep_index(u16 wIndex) |
| { |
| if (!(wIndex & USB_ENDPOINT_NUMBER_MASK)) |
| return 0; |
| |
| return ((wIndex & USB_ENDPOINT_NUMBER_MASK) * 2) + |
| (wIndex & USB_ENDPOINT_DIR_MASK ? 1 : 0) - 1; |
| } |
| |
| static bool cdns2_check_new_setup(struct cdns2_device *pdev) |
| { |
| u8 reg; |
| |
| reg = readb(&pdev->ep0_regs->cs); |
| |
| return !!(reg & EP0CS_CHGSET); |
| } |
| |
| static void cdns2_ep0_enqueue(struct cdns2_device *pdev, dma_addr_t dma_addr, |
| unsigned int length, int zlp) |
| { |
| struct cdns2_adma_regs __iomem *regs = pdev->adma_regs; |
| struct cdns2_endpoint *pep = &pdev->eps[0]; |
| struct cdns2_ring *ring = &pep->ring; |
| |
| ring->trbs[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); |
| ring->trbs[0].length = cpu_to_le32(TRB_LEN(length)); |
| |
| if (zlp) { |
| ring->trbs[0].control = cpu_to_le32(TRB_CYCLE | |
| TRB_TYPE(TRB_NORMAL)); |
| ring->trbs[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); |
| ring->trbs[1].length = cpu_to_le32(TRB_LEN(0)); |
| ring->trbs[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | |
| TRB_TYPE(TRB_NORMAL)); |
| } else { |
| ring->trbs[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | |
| TRB_TYPE(TRB_NORMAL)); |
| ring->trbs[1].control = 0; |
| } |
| |
| trace_cdns2_queue_trb(pep, ring->trbs); |
| |
| if (!pep->dir) |
| writel(0, &pdev->ep0_regs->rxbc); |
| |
| cdns2_select_ep(pdev, pep->dir); |
| |
| writel(DMA_EP_STS_TRBERR, ®s->ep_sts); |
| writel(pep->ring.dma, ®s->ep_traddr); |
| |
| trace_cdns2_doorbell_ep0(pep, readl(®s->ep_traddr)); |
| |
| writel(DMA_EP_CMD_DRDY, ®s->ep_cmd); |
| } |
| |
| static int cdns2_ep0_delegate_req(struct cdns2_device *pdev) |
| { |
| int ret; |
| |
| spin_unlock(&pdev->lock); |
| ret = pdev->gadget_driver->setup(&pdev->gadget, &pdev->setup); |
| spin_lock(&pdev->lock); |
| |
| return ret; |
| } |
| |
| static void cdns2_ep0_stall(struct cdns2_device *pdev) |
| { |
| struct cdns2_endpoint *pep = &pdev->eps[0]; |
| struct cdns2_request *preq; |
| |
| preq = cdns2_next_preq(&pep->pending_list); |
| set_reg_bit_8(&pdev->ep0_regs->cs, EP0CS_DSTALL); |
| |
| if (pdev->ep0_stage == CDNS2_DATA_STAGE && preq) |
| cdns2_gadget_giveback(pep, preq, -ECONNRESET); |
| else if (preq) |
| list_del_init(&preq->list); |
| |
| pdev->ep0_stage = CDNS2_SETUP_STAGE; |
| pep->ep_state |= EP_STALLED; |
| } |
| |
| static void cdns2_status_stage(struct cdns2_device *pdev) |
| { |
| struct cdns2_endpoint *pep = &pdev->eps[0]; |
| struct cdns2_request *preq; |
| |
| preq = cdns2_next_preq(&pep->pending_list); |
| if (preq) |
| list_del_init(&preq->list); |
| |
| pdev->ep0_stage = CDNS2_SETUP_STAGE; |
| writeb(EP0CS_HSNAK, &pdev->ep0_regs->cs); |
| } |
| |
| static int cdns2_req_ep0_set_configuration(struct cdns2_device *pdev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| enum usb_device_state state = pdev->gadget.state; |
| u32 config = le16_to_cpu(ctrl_req->wValue); |
| int ret; |
| |
| if (state < USB_STATE_ADDRESS) { |
| dev_err(pdev->dev, "Set Configuration - bad device state\n"); |
| return -EINVAL; |
| } |
| |
| ret = cdns2_ep0_delegate_req(pdev); |
| if (ret) |
| return ret; |
| |
| trace_cdns2_device_state(config ? "configured" : "addressed"); |
| |
| if (!config) |
| usb_gadget_set_state(&pdev->gadget, USB_STATE_ADDRESS); |
| |
| return 0; |
| } |
| |
| static int cdns2_req_ep0_set_address(struct cdns2_device *pdev, u32 addr) |
| { |
| enum usb_device_state device_state = pdev->gadget.state; |
| u8 reg; |
| |
| if (addr > USB_DEVICE_MAX_ADDRESS) { |
| dev_err(pdev->dev, |
| "Device address (%d) cannot be greater than %d\n", |
| addr, USB_DEVICE_MAX_ADDRESS); |
| return -EINVAL; |
| } |
| |
| if (device_state == USB_STATE_CONFIGURED) { |
| dev_err(pdev->dev, |
| "can't set_address from configured state\n"); |
| return -EINVAL; |
| } |
| |
| reg = readb(&pdev->usb_regs->fnaddr); |
| pdev->dev_address = reg; |
| |
| usb_gadget_set_state(&pdev->gadget, |
| (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT)); |
| |
| trace_cdns2_device_state(addr ? "addressed" : "default"); |
| |
| return 0; |
| } |
| |
| static int cdns2_req_ep0_handle_status(struct cdns2_device *pdev, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct cdns2_endpoint *pep; |
| __le16 *response_pkt; |
| u16 status = 0; |
| int ep_sts; |
| u32 recip; |
| |
| recip = ctrl->bRequestType & USB_RECIP_MASK; |
| |
| switch (recip) { |
| case USB_RECIP_DEVICE: |
| status = pdev->gadget.is_selfpowered; |
| status |= pdev->may_wakeup << USB_DEVICE_REMOTE_WAKEUP; |
| break; |
| case USB_RECIP_INTERFACE: |
| return cdns2_ep0_delegate_req(pdev); |
| case USB_RECIP_ENDPOINT: |
| ep_sts = cdns2_w_index_to_ep_index(le16_to_cpu(ctrl->wIndex)); |
| pep = &pdev->eps[ep_sts]; |
| |
| if (pep->ep_state & EP_STALLED) |
| status = BIT(USB_ENDPOINT_HALT); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| put_unaligned_le16(status, (__le16 *)pdev->ep0_preq.request.buf); |
| |
| cdns2_ep0_enqueue(pdev, pdev->ep0_preq.request.dma, |
| sizeof(*response_pkt), 0); |
| |
| return 0; |
| } |
| |
| static int cdns2_ep0_handle_feature_device(struct cdns2_device *pdev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| enum usb_device_state state; |
| enum usb_device_speed speed; |
| int ret = 0; |
| u32 wValue; |
| u16 tmode; |
| |
| wValue = le16_to_cpu(ctrl->wValue); |
| state = pdev->gadget.state; |
| speed = pdev->gadget.speed; |
| |
| switch (wValue) { |
| case USB_DEVICE_REMOTE_WAKEUP: |
| pdev->may_wakeup = !!set; |
| break; |
| case USB_DEVICE_TEST_MODE: |
| if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH) |
| return -EINVAL; |
| |
| tmode = le16_to_cpu(ctrl->wIndex); |
| |
| if (!set || (tmode & 0xff) != 0) |
| return -EINVAL; |
| |
| tmode >>= 8; |
| switch (tmode) { |
| case USB_TEST_J: |
| case USB_TEST_K: |
| case USB_TEST_SE0_NAK: |
| case USB_TEST_PACKET: |
| /* |
| * The USBHS controller automatically handles the |
| * Set_Feature(testmode) request. Standard test modes |
| * that use values of test mode selector from |
| * 01h to 04h (Test_J, Test_K, Test_SE0_NAK, |
| * Test_Packet) are supported by the |
| * controller(HS - ack, FS - stall). |
| */ |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int cdns2_ep0_handle_feature_intf(struct cdns2_device *pdev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| int ret = 0; |
| u32 wValue; |
| |
| wValue = le16_to_cpu(ctrl->wValue); |
| |
| switch (wValue) { |
| case USB_INTRF_FUNC_SUSPEND: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int cdns2_ep0_handle_feature_endpoint(struct cdns2_device *pdev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| struct cdns2_endpoint *pep; |
| u8 wValue; |
| |
| wValue = le16_to_cpu(ctrl->wValue); |
| pep = &pdev->eps[cdns2_w_index_to_ep_index(le16_to_cpu(ctrl->wIndex))]; |
| |
| if (wValue != USB_ENDPOINT_HALT) |
| return -EINVAL; |
| |
| if (!(le16_to_cpu(ctrl->wIndex) & ~USB_DIR_IN)) |
| return 0; |
| |
| switch (wValue) { |
| case USB_ENDPOINT_HALT: |
| if (set || !(pep->ep_state & EP_WEDGE)) |
| return cdns2_halt_endpoint(pdev, pep, set); |
| break; |
| default: |
| dev_warn(pdev->dev, "WARN Incorrect wValue %04x\n", wValue); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int cdns2_req_ep0_handle_feature(struct cdns2_device *pdev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| switch (ctrl->bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| return cdns2_ep0_handle_feature_device(pdev, ctrl, set); |
| case USB_RECIP_INTERFACE: |
| return cdns2_ep0_handle_feature_intf(pdev, ctrl, set); |
| case USB_RECIP_ENDPOINT: |
| return cdns2_ep0_handle_feature_endpoint(pdev, ctrl, set); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int cdns2_ep0_std_request(struct cdns2_device *pdev) |
| { |
| struct usb_ctrlrequest *ctrl = &pdev->setup; |
| int ret; |
| |
| switch (ctrl->bRequest) { |
| case USB_REQ_SET_ADDRESS: |
| ret = cdns2_req_ep0_set_address(pdev, |
| le16_to_cpu(ctrl->wValue)); |
| break; |
| case USB_REQ_SET_CONFIGURATION: |
| ret = cdns2_req_ep0_set_configuration(pdev, ctrl); |
| break; |
| case USB_REQ_GET_STATUS: |
| ret = cdns2_req_ep0_handle_status(pdev, ctrl); |
| break; |
| case USB_REQ_CLEAR_FEATURE: |
| ret = cdns2_req_ep0_handle_feature(pdev, ctrl, 0); |
| break; |
| case USB_REQ_SET_FEATURE: |
| ret = cdns2_req_ep0_handle_feature(pdev, ctrl, 1); |
| break; |
| default: |
| ret = cdns2_ep0_delegate_req(pdev); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void __pending_setup_status_handler(struct cdns2_device *pdev) |
| { |
| struct usb_request *request = pdev->pending_status_request; |
| |
| if (pdev->status_completion_no_call && request && request->complete) { |
| request->complete(&pdev->eps[0].endpoint, request); |
| pdev->status_completion_no_call = 0; |
| } |
| } |
| |
| void cdns2_pending_setup_status_handler(struct work_struct *work) |
| { |
| struct cdns2_device *pdev = container_of(work, struct cdns2_device, |
| pending_status_wq); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| __pending_setup_status_handler(pdev); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| } |
| |
| void cdns2_handle_setup_packet(struct cdns2_device *pdev) |
| { |
| struct usb_ctrlrequest *ctrl = &pdev->setup; |
| struct cdns2_endpoint *pep = &pdev->eps[0]; |
| struct cdns2_request *preq; |
| int ret = 0; |
| u16 len; |
| u8 reg; |
| int i; |
| |
| writeb(EP0CS_CHGSET, &pdev->ep0_regs->cs); |
| |
| for (i = 0; i < 8; i++) |
| ((u8 *)&pdev->setup)[i] = readb(&pdev->ep0_regs->setupdat[i]); |
| |
| /* |
| * If SETUP packet was modified while reading just simple ignore it. |
| * The new one will be handled latter. |
| */ |
| if (cdns2_check_new_setup(pdev)) { |
| trace_cdns2_ep0_setup("overridden"); |
| return; |
| } |
| |
| trace_cdns2_ctrl_req(ctrl); |
| |
| if (!pdev->gadget_driver) |
| goto out; |
| |
| if (pdev->gadget.state == USB_STATE_NOTATTACHED) { |
| dev_err(pdev->dev, "ERR: Setup detected in unattached state\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| pep = &pdev->eps[0]; |
| |
| /* Halt for Ep0 is cleared automatically when SETUP packet arrives. */ |
| pep->ep_state &= ~EP_STALLED; |
| |
| if (!list_empty(&pep->pending_list)) { |
| preq = cdns2_next_preq(&pep->pending_list); |
| cdns2_gadget_giveback(pep, preq, -ECONNRESET); |
| } |
| |
| len = le16_to_cpu(ctrl->wLength); |
| if (len) |
| pdev->ep0_stage = CDNS2_DATA_STAGE; |
| else |
| pdev->ep0_stage = CDNS2_STATUS_STAGE; |
| |
| pep->dir = ctrl->bRequestType & USB_DIR_IN; |
| |
| /* |
| * SET_ADDRESS request is acknowledged automatically by controller and |
| * in the worse case driver may not notice this request. To check |
| * whether this request has been processed driver can use |
| * fnaddr register. |
| */ |
| reg = readb(&pdev->usb_regs->fnaddr); |
| if (pdev->setup.bRequest != USB_REQ_SET_ADDRESS && |
| pdev->dev_address != reg) |
| cdns2_req_ep0_set_address(pdev, reg); |
| |
| if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) |
| ret = cdns2_ep0_std_request(pdev); |
| else |
| ret = cdns2_ep0_delegate_req(pdev); |
| |
| if (ret == USB_GADGET_DELAYED_STATUS) { |
| trace_cdns2_ep0_status_stage("delayed"); |
| return; |
| } |
| |
| out: |
| if (ret < 0) |
| cdns2_ep0_stall(pdev); |
| else if (pdev->ep0_stage == CDNS2_STATUS_STAGE) |
| cdns2_status_stage(pdev); |
| } |
| |
| static void cdns2_transfer_completed(struct cdns2_device *pdev) |
| { |
| struct cdns2_endpoint *pep = &pdev->eps[0]; |
| |
| if (!list_empty(&pep->pending_list)) { |
| struct cdns2_request *preq; |
| |
| trace_cdns2_complete_trb(pep, pep->ring.trbs); |
| preq = cdns2_next_preq(&pep->pending_list); |
| |
| preq->request.actual = |
| TRB_LEN(le32_to_cpu(pep->ring.trbs->length)); |
| cdns2_gadget_giveback(pep, preq, 0); |
| } |
| |
| cdns2_status_stage(pdev); |
| } |
| |
| void cdns2_handle_ep0_interrupt(struct cdns2_device *pdev, int dir) |
| { |
| u32 ep_sts_reg; |
| |
| cdns2_select_ep(pdev, dir); |
| |
| trace_cdns2_ep0_irq(pdev); |
| |
| ep_sts_reg = readl(&pdev->adma_regs->ep_sts); |
| writel(ep_sts_reg, &pdev->adma_regs->ep_sts); |
| |
| __pending_setup_status_handler(pdev); |
| |
| if ((ep_sts_reg & DMA_EP_STS_IOC) || (ep_sts_reg & DMA_EP_STS_ISP)) { |
| pdev->eps[0].dir = dir; |
| cdns2_transfer_completed(pdev); |
| } |
| } |
| |
| /* |
| * Function shouldn't be called by gadget driver, |
| * endpoint 0 is allways active. |
| */ |
| static int cdns2_gadget_ep0_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| return -EINVAL; |
| } |
| |
| /* |
| * Function shouldn't be called by gadget driver, |
| * endpoint 0 is allways active. |
| */ |
| static int cdns2_gadget_ep0_disable(struct usb_ep *ep) |
| { |
| return -EINVAL; |
| } |
| |
| static int cdns2_gadget_ep0_set_halt(struct usb_ep *ep, int value) |
| { |
| struct cdns2_endpoint *pep = ep_to_cdns2_ep(ep); |
| struct cdns2_device *pdev = pep->pdev; |
| unsigned long flags; |
| |
| if (!value) |
| return 0; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| cdns2_ep0_stall(pdev); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| static int cdns2_gadget_ep0_set_wedge(struct usb_ep *ep) |
| { |
| return cdns2_gadget_ep0_set_halt(ep, 1); |
| } |
| |
| static int cdns2_gadget_ep0_queue(struct usb_ep *ep, |
| struct usb_request *request, |
| gfp_t gfp_flags) |
| { |
| struct cdns2_endpoint *pep = ep_to_cdns2_ep(ep); |
| struct cdns2_device *pdev = pep->pdev; |
| struct cdns2_request *preq; |
| unsigned long flags; |
| u8 zlp = 0; |
| int ret; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| preq = to_cdns2_request(request); |
| |
| trace_cdns2_request_enqueue(preq); |
| |
| /* Cancel the request if controller receive new SETUP packet. */ |
| if (cdns2_check_new_setup(pdev)) { |
| trace_cdns2_ep0_setup("overridden"); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| return -ECONNRESET; |
| } |
| |
| /* Send STATUS stage. Should be called only for SET_CONFIGURATION. */ |
| if (pdev->ep0_stage == CDNS2_STATUS_STAGE) { |
| cdns2_status_stage(pdev); |
| |
| request->actual = 0; |
| pdev->status_completion_no_call = true; |
| pdev->pending_status_request = request; |
| usb_gadget_set_state(&pdev->gadget, USB_STATE_CONFIGURED); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| /* |
| * Since there is no completion interrupt for status stage, |
| * it needs to call ->completion in software after |
| * cdns2_gadget_ep0_queue is back. |
| */ |
| queue_work(system_freezable_wq, &pdev->pending_status_wq); |
| return 0; |
| } |
| |
| if (!list_empty(&pep->pending_list)) { |
| trace_cdns2_ep0_setup("pending"); |
| dev_err(pdev->dev, |
| "can't handle multiple requests for ep0\n"); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| return -EBUSY; |
| } |
| |
| ret = usb_gadget_map_request_by_dev(pdev->dev, request, pep->dir); |
| if (ret) { |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| dev_err(pdev->dev, "failed to map request\n"); |
| return -EINVAL; |
| } |
| |
| request->status = -EINPROGRESS; |
| list_add_tail(&preq->list, &pep->pending_list); |
| |
| if (request->zero && request->length && |
| (request->length % ep->maxpacket == 0)) |
| zlp = 1; |
| |
| cdns2_ep0_enqueue(pdev, request->dma, request->length, zlp); |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| static const struct usb_ep_ops cdns2_gadget_ep0_ops = { |
| .enable = cdns2_gadget_ep0_enable, |
| .disable = cdns2_gadget_ep0_disable, |
| .alloc_request = cdns2_gadget_ep_alloc_request, |
| .free_request = cdns2_gadget_ep_free_request, |
| .queue = cdns2_gadget_ep0_queue, |
| .dequeue = cdns2_gadget_ep_dequeue, |
| .set_halt = cdns2_gadget_ep0_set_halt, |
| .set_wedge = cdns2_gadget_ep0_set_wedge, |
| }; |
| |
| void cdns2_ep0_config(struct cdns2_device *pdev) |
| { |
| struct cdns2_endpoint *pep; |
| |
| pep = &pdev->eps[0]; |
| |
| if (!list_empty(&pep->pending_list)) { |
| struct cdns2_request *preq; |
| |
| preq = cdns2_next_preq(&pep->pending_list); |
| list_del_init(&preq->list); |
| } |
| |
| writeb(EP0_FIFO_AUTO, &pdev->ep0_regs->fifo); |
| cdns2_select_ep(pdev, USB_DIR_OUT); |
| writel(DMA_EP_CFG_ENABLE, &pdev->adma_regs->ep_cfg); |
| |
| writeb(EP0_FIFO_IO_TX | EP0_FIFO_AUTO, &pdev->ep0_regs->fifo); |
| cdns2_select_ep(pdev, USB_DIR_IN); |
| writel(DMA_EP_CFG_ENABLE, &pdev->adma_regs->ep_cfg); |
| |
| writeb(pdev->gadget.ep0->maxpacket, &pdev->ep0_regs->maxpack); |
| writel(DMA_EP_IEN_EP_OUT0 | DMA_EP_IEN_EP_IN0, |
| &pdev->adma_regs->ep_ien); |
| } |
| |
| void cdns2_init_ep0(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| u16 maxpacket = le16_to_cpu(cdns2_gadget_ep0_desc.wMaxPacketSize); |
| |
| usb_ep_set_maxpacket_limit(&pep->endpoint, maxpacket); |
| |
| pep->endpoint.ops = &cdns2_gadget_ep0_ops; |
| pep->endpoint.desc = &cdns2_gadget_ep0_desc; |
| pep->endpoint.caps.type_control = true; |
| pep->endpoint.caps.dir_in = true; |
| pep->endpoint.caps.dir_out = true; |
| |
| pdev->gadget.ep0 = &pep->endpoint; |
| } |