| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Cadence USBHS-DEV Driver - gadget side. |
| * |
| * Copyright (C) 2023 Cadence Design Systems. |
| * |
| * Authors: Pawel Laszczak <pawell@cadence.com> |
| */ |
| |
| /* |
| * Work around 1: |
| * At some situations, the controller may get stale data address in TRB |
| * at below sequences: |
| * 1. Controller read TRB includes data address |
| * 2. Software updates TRBs includes data address and Cycle bit |
| * 3. Controller read TRB which includes Cycle bit |
| * 4. DMA run with stale data address |
| * |
| * To fix this problem, driver needs to make the first TRB in TD as invalid. |
| * After preparing all TRBs driver needs to check the position of DMA and |
| * if the DMA point to the first just added TRB and doorbell is 1, |
| * then driver must defer making this TRB as valid. This TRB will be make |
| * as valid during adding next TRB only if DMA is stopped or at TRBERR |
| * interrupt. |
| * |
| */ |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/interrupt.h> |
| #include <linux/property.h> |
| #include <linux/dmapool.h> |
| #include <linux/iopoll.h> |
| |
| #include "cdns2-gadget.h" |
| #include "cdns2-trace.h" |
| |
| /** |
| * set_reg_bit_32 - set bit in given 32 bits register. |
| * @ptr: register address. |
| * @mask: bits to set. |
| */ |
| static void set_reg_bit_32(void __iomem *ptr, u32 mask) |
| { |
| mask = readl(ptr) | mask; |
| writel(mask, ptr); |
| } |
| |
| /* |
| * clear_reg_bit_32 - clear bit in given 32 bits register. |
| * @ptr: register address. |
| * @mask: bits to clear. |
| */ |
| static void clear_reg_bit_32(void __iomem *ptr, u32 mask) |
| { |
| mask = readl(ptr) & ~mask; |
| writel(mask, ptr); |
| } |
| |
| /* Clear bit in given 8 bits register. */ |
| static void clear_reg_bit_8(void __iomem *ptr, u8 mask) |
| { |
| mask = readb(ptr) & ~mask; |
| writeb(mask, ptr); |
| } |
| |
| /* Set bit in given 16 bits register. */ |
| void set_reg_bit_8(void __iomem *ptr, u8 mask) |
| { |
| mask = readb(ptr) | mask; |
| writeb(mask, ptr); |
| } |
| |
| static int cdns2_get_dma_pos(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| int dma_index; |
| |
| dma_index = readl(&pdev->adma_regs->ep_traddr) - pep->ring.dma; |
| |
| return dma_index / TRB_SIZE; |
| } |
| |
| /* Get next private request from list. */ |
| struct cdns2_request *cdns2_next_preq(struct list_head *list) |
| { |
| return list_first_entry_or_null(list, struct cdns2_request, list); |
| } |
| |
| void cdns2_select_ep(struct cdns2_device *pdev, u32 ep) |
| { |
| if (pdev->selected_ep == ep) |
| return; |
| |
| pdev->selected_ep = ep; |
| writel(ep, &pdev->adma_regs->ep_sel); |
| } |
| |
| dma_addr_t cdns2_trb_virt_to_dma(struct cdns2_endpoint *pep, |
| struct cdns2_trb *trb) |
| { |
| u32 offset = (char *)trb - (char *)pep->ring.trbs; |
| |
| return pep->ring.dma + offset; |
| } |
| |
| static void cdns2_free_tr_segment(struct cdns2_endpoint *pep) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| struct cdns2_ring *ring = &pep->ring; |
| |
| if (pep->ring.trbs) { |
| dma_pool_free(pdev->eps_dma_pool, ring->trbs, ring->dma); |
| memset(ring, 0, sizeof(*ring)); |
| } |
| } |
| |
| /* Allocates Transfer Ring segment. */ |
| static int cdns2_alloc_tr_segment(struct cdns2_endpoint *pep) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| struct cdns2_trb *link_trb; |
| struct cdns2_ring *ring; |
| |
| ring = &pep->ring; |
| |
| if (!ring->trbs) { |
| ring->trbs = dma_pool_alloc(pdev->eps_dma_pool, |
| GFP_DMA32 | GFP_ATOMIC, |
| &ring->dma); |
| if (!ring->trbs) |
| return -ENOMEM; |
| } |
| |
| memset(ring->trbs, 0, TR_SEG_SIZE); |
| |
| if (!pep->num) |
| return 0; |
| |
| /* Initialize the last TRB as Link TRB */ |
| link_trb = (ring->trbs + (TRBS_PER_SEGMENT - 1)); |
| link_trb->buffer = cpu_to_le32(TRB_BUFFER(ring->dma)); |
| link_trb->control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_LINK) | |
| TRB_TOGGLE); |
| |
| return 0; |
| } |
| |
| /* |
| * Stalls and flushes selected endpoint. |
| * Endpoint must be selected before invoking this function. |
| */ |
| static void cdns2_ep_stall_flush(struct cdns2_endpoint *pep) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| int val; |
| |
| trace_cdns2_ep_halt(pep, 1, 1); |
| |
| writel(DMA_EP_CMD_DFLUSH, &pdev->adma_regs->ep_cmd); |
| |
| /* Wait for DFLUSH cleared. */ |
| readl_poll_timeout_atomic(&pdev->adma_regs->ep_cmd, val, |
| !(val & DMA_EP_CMD_DFLUSH), 1, 1000); |
| pep->ep_state |= EP_STALLED; |
| pep->ep_state &= ~EP_STALL_PENDING; |
| } |
| |
| /* |
| * Increment a trb index. |
| * |
| * The index should never point to the last link TRB in TR. After incrementing, |
| * if it point to the link TRB, wrap around to the beginning and revert |
| * cycle state bit. The link TRB is always at the last TRB entry. |
| */ |
| static void cdns2_ep_inc_trb(int *index, u8 *cs, int trb_in_seg) |
| { |
| (*index)++; |
| if (*index == (trb_in_seg - 1)) { |
| *index = 0; |
| *cs ^= 1; |
| } |
| } |
| |
| static void cdns2_ep_inc_enq(struct cdns2_ring *ring) |
| { |
| ring->free_trbs--; |
| cdns2_ep_inc_trb(&ring->enqueue, &ring->pcs, TRBS_PER_SEGMENT); |
| } |
| |
| static void cdns2_ep_inc_deq(struct cdns2_ring *ring) |
| { |
| ring->free_trbs++; |
| cdns2_ep_inc_trb(&ring->dequeue, &ring->ccs, TRBS_PER_SEGMENT); |
| } |
| |
| /* |
| * Enable/disable LPM. |
| * |
| * If bit USBCS_LPMNYET is not set and device receive Extended Token packet, |
| * then controller answer with ACK handshake. |
| * If bit USBCS_LPMNYET is set and device receive Extended Token packet, |
| * then controller answer with NYET handshake. |
| */ |
| static void cdns2_enable_l1(struct cdns2_device *pdev, int enable) |
| { |
| if (enable) { |
| clear_reg_bit_8(&pdev->usb_regs->usbcs, USBCS_LPMNYET); |
| writeb(LPMCLOCK_SLEEP_ENTRY, &pdev->usb_regs->lpmclock); |
| } else { |
| set_reg_bit_8(&pdev->usb_regs->usbcs, USBCS_LPMNYET); |
| } |
| } |
| |
| static enum usb_device_speed cdns2_get_speed(struct cdns2_device *pdev) |
| { |
| u8 speed = readb(&pdev->usb_regs->speedctrl); |
| |
| if (speed & SPEEDCTRL_HS) |
| return USB_SPEED_HIGH; |
| else if (speed & SPEEDCTRL_FS) |
| return USB_SPEED_FULL; |
| |
| return USB_SPEED_UNKNOWN; |
| } |
| |
| static struct cdns2_trb *cdns2_next_trb(struct cdns2_endpoint *pep, |
| struct cdns2_trb *trb) |
| { |
| if (trb == (pep->ring.trbs + (TRBS_PER_SEGMENT - 1))) |
| return pep->ring.trbs; |
| else |
| return ++trb; |
| } |
| |
| void cdns2_gadget_giveback(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq, |
| int status) |
| { |
| struct usb_request *request = &preq->request; |
| struct cdns2_device *pdev = pep->pdev; |
| |
| list_del_init(&preq->list); |
| |
| if (request->status == -EINPROGRESS) |
| request->status = status; |
| |
| usb_gadget_unmap_request_by_dev(pdev->dev, request, pep->dir); |
| |
| /* All TRBs have finished, clear the counter. */ |
| preq->finished_trb = 0; |
| |
| trace_cdns2_request_giveback(preq); |
| |
| if (request->complete) { |
| spin_unlock(&pdev->lock); |
| usb_gadget_giveback_request(&pep->endpoint, request); |
| spin_lock(&pdev->lock); |
| } |
| |
| if (request->buf == pdev->zlp_buf) |
| cdns2_gadget_ep_free_request(&pep->endpoint, request); |
| } |
| |
| static void cdns2_wa1_restore_cycle_bit(struct cdns2_endpoint *pep) |
| { |
| /* Work around for stale data address in TRB. */ |
| if (pep->wa1_set) { |
| trace_cdns2_wa1(pep, "restore cycle bit"); |
| |
| pep->wa1_set = 0; |
| pep->wa1_trb_index = 0xFFFF; |
| if (pep->wa1_cycle_bit) |
| pep->wa1_trb->control |= cpu_to_le32(0x1); |
| else |
| pep->wa1_trb->control &= cpu_to_le32(~0x1); |
| } |
| } |
| |
| static int cdns2_wa1_update_guard(struct cdns2_endpoint *pep, |
| struct cdns2_trb *trb) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| |
| if (!pep->wa1_set) { |
| u32 doorbell; |
| |
| doorbell = !!(readl(&pdev->adma_regs->ep_cmd) & DMA_EP_CMD_DRDY); |
| |
| if (doorbell) { |
| pep->wa1_cycle_bit = pep->ring.pcs ? TRB_CYCLE : 0; |
| pep->wa1_set = 1; |
| pep->wa1_trb = trb; |
| pep->wa1_trb_index = pep->ring.enqueue; |
| trace_cdns2_wa1(pep, "set guard"); |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| static void cdns2_wa1_tray_restore_cycle_bit(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| int dma_index; |
| u32 doorbell; |
| |
| doorbell = !!(readl(&pdev->adma_regs->ep_cmd) & DMA_EP_CMD_DRDY); |
| dma_index = cdns2_get_dma_pos(pdev, pep); |
| |
| if (!doorbell || dma_index != pep->wa1_trb_index) |
| cdns2_wa1_restore_cycle_bit(pep); |
| } |
| |
| static int cdns2_prepare_ring(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep, |
| int num_trbs) |
| { |
| struct cdns2_trb *link_trb = NULL; |
| int doorbell, dma_index; |
| struct cdns2_ring *ring; |
| u32 ch_bit = 0; |
| |
| ring = &pep->ring; |
| |
| if (num_trbs > ring->free_trbs) { |
| pep->ep_state |= EP_RING_FULL; |
| trace_cdns2_no_room_on_ring("Ring full\n"); |
| return -ENOBUFS; |
| } |
| |
| if ((ring->enqueue + num_trbs) >= (TRBS_PER_SEGMENT - 1)) { |
| doorbell = !!(readl(&pdev->adma_regs->ep_cmd) & DMA_EP_CMD_DRDY); |
| dma_index = cdns2_get_dma_pos(pdev, pep); |
| |
| /* Driver can't update LINK TRB if it is current processed. */ |
| if (doorbell && dma_index == TRBS_PER_SEGMENT - 1) { |
| pep->ep_state |= EP_DEFERRED_DRDY; |
| return -ENOBUFS; |
| } |
| |
| /* Update C bt in Link TRB before starting DMA. */ |
| link_trb = ring->trbs + (TRBS_PER_SEGMENT - 1); |
| |
| /* |
| * For TRs size equal 2 enabling TRB_CHAIN for epXin causes |
| * that DMA stuck at the LINK TRB. |
| * On the other hand, removing TRB_CHAIN for longer TRs for |
| * epXout cause that DMA stuck after handling LINK TRB. |
| * To eliminate this strange behavioral driver set TRB_CHAIN |
| * bit only for TR size > 2. |
| */ |
| if (pep->type == USB_ENDPOINT_XFER_ISOC || TRBS_PER_SEGMENT > 2) |
| ch_bit = TRB_CHAIN; |
| |
| link_trb->control = cpu_to_le32(((ring->pcs) ? TRB_CYCLE : 0) | |
| TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit); |
| } |
| |
| return 0; |
| } |
| |
| static void cdns2_dbg_request_trbs(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq) |
| { |
| struct cdns2_trb *link_trb = pep->ring.trbs + (TRBS_PER_SEGMENT - 1); |
| struct cdns2_trb *trb = preq->trb; |
| int num_trbs = preq->num_of_trb; |
| int i = 0; |
| |
| while (i < num_trbs) { |
| trace_cdns2_queue_trb(pep, trb + i); |
| if (trb + i == link_trb) { |
| trb = pep->ring.trbs; |
| num_trbs = num_trbs - i; |
| i = 0; |
| } else { |
| i++; |
| } |
| } |
| } |
| |
| static unsigned int cdns2_count_trbs(struct cdns2_endpoint *pep, |
| u64 addr, u64 len) |
| { |
| unsigned int num_trbs = 1; |
| |
| if (pep->type == USB_ENDPOINT_XFER_ISOC) { |
| /* |
| * To speed up DMA performance address should not exceed 4KB. |
| * for high bandwidth transfer and driver will split |
| * such buffer into two TRBs. |
| */ |
| num_trbs = DIV_ROUND_UP(len + |
| (addr & (TRB_MAX_ISO_BUFF_SIZE - 1)), |
| TRB_MAX_ISO_BUFF_SIZE); |
| |
| if (pep->interval > 1) |
| num_trbs = pep->dir ? num_trbs * pep->interval : 1; |
| } else if (pep->dir) { |
| /* |
| * One extra link trb for IN direction. |
| * Sometimes DMA doesn't want advance to next TD and transfer |
| * hangs. This extra Link TRB force DMA to advance to next TD. |
| */ |
| num_trbs++; |
| } |
| |
| return num_trbs; |
| } |
| |
| static unsigned int cdns2_count_sg_trbs(struct cdns2_endpoint *pep, |
| struct usb_request *req) |
| { |
| unsigned int i, len, full_len, num_trbs = 0; |
| struct scatterlist *sg; |
| int trb_len = 0; |
| |
| full_len = req->length; |
| |
| for_each_sg(req->sg, sg, req->num_sgs, i) { |
| len = sg_dma_len(sg); |
| num_trbs += cdns2_count_trbs(pep, sg_dma_address(sg), len); |
| len = min(len, full_len); |
| |
| /* |
| * For HS ISO transfer TRBs should not exceed max packet size. |
| * When DMA is working, and data exceed max packet size then |
| * some data will be read in single mode instead burst mode. |
| * This behavior will drastically reduce the copying speed. |
| * To avoid this we need one or two extra TRBs. |
| * This issue occurs for UVC class with sg_supported = 1 |
| * because buffers addresses are not aligned to 1024. |
| */ |
| if (pep->type == USB_ENDPOINT_XFER_ISOC) { |
| u8 temp; |
| |
| trb_len += len; |
| temp = trb_len >> 10; |
| |
| if (temp) { |
| if (trb_len % 1024) |
| num_trbs = num_trbs + temp; |
| else |
| num_trbs = num_trbs + temp - 1; |
| |
| trb_len = trb_len - (temp << 10); |
| } |
| } |
| |
| full_len -= len; |
| if (full_len == 0) |
| break; |
| } |
| |
| return num_trbs; |
| } |
| |
| /* |
| * Function prepares the array with optimized AXI burst value for different |
| * transfer lengths. Controller handles the final data which are less |
| * then AXI burst size as single byte transactions. |
| * e.g.: |
| * Let's assume that driver prepares trb with trb->length 700 and burst size |
| * will be set to 128. In this case the controller will handle a first 512 as |
| * single AXI transaction but the next 188 bytes will be handled |
| * as 47 separate AXI transaction. |
| * The better solution is to use the burst size equal 16 and then we will |
| * have only 25 AXI transaction (10 * 64 + 15 *4). |
| */ |
| static void cdsn2_isoc_burst_opt(struct cdns2_device *pdev) |
| { |
| int axi_burst_option[] = {1, 2, 4, 8, 16, 32, 64, 128}; |
| int best_burst; |
| int array_size; |
| int opt_burst; |
| int trb_size; |
| int i, j; |
| |
| array_size = ARRAY_SIZE(axi_burst_option); |
| |
| for (i = 0; i <= MAX_ISO_SIZE; i++) { |
| trb_size = i / 4; |
| best_burst = trb_size ? trb_size : 1; |
| |
| for (j = 0; j < array_size; j++) { |
| opt_burst = trb_size / axi_burst_option[j]; |
| opt_burst += trb_size % axi_burst_option[j]; |
| |
| if (opt_burst < best_burst) { |
| best_burst = opt_burst; |
| pdev->burst_opt[i] = axi_burst_option[j]; |
| } |
| } |
| } |
| } |
| |
| static void cdns2_ep_tx_isoc(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq, |
| int num_trbs) |
| { |
| struct scatterlist *sg = NULL; |
| u32 remaining_packet_size = 0; |
| struct cdns2_trb *trb; |
| bool first_trb = true; |
| dma_addr_t trb_dma; |
| u32 trb_buff_len; |
| u32 block_length; |
| int td_idx = 0; |
| int split_size; |
| u32 full_len; |
| int enqd_len; |
| int sent_len; |
| int sg_iter; |
| u32 control; |
| int num_tds; |
| u32 length; |
| |
| /* |
| * For OUT direction 1 TD per interval is enough |
| * because TRBs are not dumped by controller. |
| */ |
| num_tds = pep->dir ? pep->interval : 1; |
| split_size = preq->request.num_sgs ? 1024 : 3072; |
| |
| for (td_idx = 0; td_idx < num_tds; td_idx++) { |
| if (preq->request.num_sgs) { |
| sg = preq->request.sg; |
| trb_dma = sg_dma_address(sg); |
| block_length = sg_dma_len(sg); |
| } else { |
| trb_dma = preq->request.dma; |
| block_length = preq->request.length; |
| } |
| |
| full_len = preq->request.length; |
| sg_iter = preq->request.num_sgs ? preq->request.num_sgs : 1; |
| remaining_packet_size = split_size; |
| |
| for (enqd_len = 0; enqd_len < full_len; |
| enqd_len += trb_buff_len) { |
| if (remaining_packet_size == 0) |
| remaining_packet_size = split_size; |
| |
| /* |
| * Calculate TRB length.- buffer can't across 4KB |
| * and max packet size. |
| */ |
| trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(trb_dma); |
| trb_buff_len = min(trb_buff_len, remaining_packet_size); |
| trb_buff_len = min(trb_buff_len, block_length); |
| |
| if (trb_buff_len > full_len - enqd_len) |
| trb_buff_len = full_len - enqd_len; |
| |
| control = TRB_TYPE(TRB_NORMAL); |
| |
| /* |
| * For IN direction driver has to set the IOC for |
| * last TRB in last TD. |
| * For OUT direction driver must set IOC and ISP |
| * only for last TRB in each TDs. |
| */ |
| if (enqd_len + trb_buff_len >= full_len || !pep->dir) |
| control |= TRB_IOC | TRB_ISP; |
| |
| /* |
| * Don't give the first TRB to the hardware (by toggling |
| * the cycle bit) until we've finished creating all the |
| * other TRBs. |
| */ |
| if (first_trb) { |
| first_trb = false; |
| if (pep->ring.pcs == 0) |
| control |= TRB_CYCLE; |
| } else { |
| control |= pep->ring.pcs; |
| } |
| |
| if (enqd_len + trb_buff_len < full_len) |
| control |= TRB_CHAIN; |
| |
| length = TRB_LEN(trb_buff_len) | |
| TRB_BURST(pep->pdev->burst_opt[trb_buff_len]); |
| |
| trb = pep->ring.trbs + pep->ring.enqueue; |
| trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma)); |
| trb->length = cpu_to_le32(length); |
| trb->control = cpu_to_le32(control); |
| |
| trb_dma += trb_buff_len; |
| sent_len = trb_buff_len; |
| |
| if (sg && sent_len >= block_length) { |
| /* New sg entry */ |
| --sg_iter; |
| sent_len -= block_length; |
| if (sg_iter != 0) { |
| sg = sg_next(sg); |
| trb_dma = sg_dma_address(sg); |
| block_length = sg_dma_len(sg); |
| } |
| } |
| |
| remaining_packet_size -= trb_buff_len; |
| block_length -= sent_len; |
| preq->end_trb = pep->ring.enqueue; |
| |
| cdns2_ep_inc_enq(&pep->ring); |
| } |
| } |
| } |
| |
| static void cdns2_ep_tx_bulk(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq, |
| int trbs_per_td) |
| { |
| struct scatterlist *sg = NULL; |
| struct cdns2_ring *ring; |
| struct cdns2_trb *trb; |
| dma_addr_t trb_dma; |
| int sg_iter = 0; |
| u32 control; |
| u32 length; |
| |
| if (preq->request.num_sgs) { |
| sg = preq->request.sg; |
| trb_dma = sg_dma_address(sg); |
| length = sg_dma_len(sg); |
| } else { |
| trb_dma = preq->request.dma; |
| length = preq->request.length; |
| } |
| |
| ring = &pep->ring; |
| |
| for (sg_iter = 0; sg_iter < trbs_per_td; sg_iter++) { |
| control = TRB_TYPE(TRB_NORMAL) | ring->pcs | TRB_ISP; |
| trb = pep->ring.trbs + ring->enqueue; |
| |
| if (pep->dir && sg_iter == trbs_per_td - 1) { |
| preq->end_trb = ring->enqueue; |
| control = ring->pcs | TRB_TYPE(TRB_LINK) | TRB_CHAIN |
| | TRB_IOC; |
| cdns2_ep_inc_enq(&pep->ring); |
| |
| if (ring->enqueue == 0) |
| control |= TRB_TOGGLE; |
| |
| /* Point to next bad TRB. */ |
| trb->buffer = cpu_to_le32(pep->ring.dma + |
| (ring->enqueue * TRB_SIZE)); |
| trb->length = 0; |
| trb->control = cpu_to_le32(control); |
| break; |
| } |
| |
| /* |
| * Don't give the first TRB to the hardware (by toggling |
| * the cycle bit) until we've finished creating all the |
| * other TRBs. |
| */ |
| if (sg_iter == 0) |
| control = control ^ TRB_CYCLE; |
| |
| /* For last TRB in TD. */ |
| if (sg_iter == (trbs_per_td - (pep->dir ? 2 : 1))) |
| control |= TRB_IOC; |
| else |
| control |= TRB_CHAIN; |
| |
| trb->buffer = cpu_to_le32(trb_dma); |
| trb->length = cpu_to_le32(TRB_BURST(pep->trb_burst_size) | |
| TRB_LEN(length)); |
| trb->control = cpu_to_le32(control); |
| |
| if (sg && sg_iter < (trbs_per_td - 1)) { |
| sg = sg_next(sg); |
| trb_dma = sg_dma_address(sg); |
| length = sg_dma_len(sg); |
| } |
| |
| preq->end_trb = ring->enqueue; |
| cdns2_ep_inc_enq(&pep->ring); |
| } |
| } |
| |
| static void cdns2_set_drdy(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| trace_cdns2_ring(pep); |
| |
| /* |
| * Memory barrier - Cycle Bit must be set before doorbell. |
| */ |
| dma_wmb(); |
| |
| /* Clearing TRBERR and DESCMIS before setting DRDY. */ |
| writel(DMA_EP_STS_TRBERR | DMA_EP_STS_DESCMIS, |
| &pdev->adma_regs->ep_sts); |
| writel(DMA_EP_CMD_DRDY, &pdev->adma_regs->ep_cmd); |
| |
| if (readl(&pdev->adma_regs->ep_sts) & DMA_EP_STS_TRBERR) { |
| writel(DMA_EP_STS_TRBERR, &pdev->adma_regs->ep_sts); |
| writel(DMA_EP_CMD_DRDY, &pdev->adma_regs->ep_cmd); |
| } |
| |
| trace_cdns2_doorbell_epx(pep, readl(&pdev->adma_regs->ep_traddr)); |
| } |
| |
| static int cdns2_prepare_first_isoc_transfer(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| struct cdns2_trb *trb; |
| u32 buffer; |
| u8 hw_ccs; |
| |
| if ((readl(&pdev->adma_regs->ep_cmd) & DMA_EP_CMD_DRDY)) |
| return -EBUSY; |
| |
| if (!pep->dir) { |
| set_reg_bit_32(&pdev->adma_regs->ep_cfg, DMA_EP_CFG_ENABLE); |
| writel(pep->ring.dma + pep->ring.dequeue, |
| &pdev->adma_regs->ep_traddr); |
| return 0; |
| } |
| |
| /* |
| * The first packet after doorbell can be corrupted so, |
| * driver prepares 0 length packet as first packet. |
| */ |
| buffer = pep->ring.dma + pep->ring.dequeue * TRB_SIZE; |
| hw_ccs = !!DMA_EP_STS_CCS(readl(&pdev->adma_regs->ep_sts)); |
| |
| trb = &pep->ring.trbs[TRBS_PER_SEGMENT]; |
| trb->length = 0; |
| trb->buffer = cpu_to_le32(TRB_BUFFER(buffer)); |
| trb->control = cpu_to_le32((hw_ccs ? TRB_CYCLE : 0) | TRB_TYPE(TRB_NORMAL)); |
| |
| /* |
| * LINK TRB is used to force updating cycle bit in controller and |
| * move to correct place in transfer ring. |
| */ |
| trb++; |
| trb->length = 0; |
| trb->buffer = cpu_to_le32(TRB_BUFFER(buffer)); |
| trb->control = cpu_to_le32((hw_ccs ? TRB_CYCLE : 0) | |
| TRB_TYPE(TRB_LINK) | TRB_CHAIN); |
| |
| if (hw_ccs != pep->ring.ccs) |
| trb->control |= cpu_to_le32(TRB_TOGGLE); |
| |
| set_reg_bit_32(&pdev->adma_regs->ep_cfg, DMA_EP_CFG_ENABLE); |
| writel(pep->ring.dma + (TRBS_PER_SEGMENT * TRB_SIZE), |
| &pdev->adma_regs->ep_traddr); |
| |
| return 0; |
| } |
| |
| /* Prepare and start transfer on no-default endpoint. */ |
| static int cdns2_ep_run_transfer(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| struct cdns2_ring *ring; |
| u32 togle_pcs = 1; |
| int num_trbs; |
| int ret; |
| |
| cdns2_select_ep(pdev, pep->endpoint.address); |
| |
| if (preq->request.sg) |
| num_trbs = cdns2_count_sg_trbs(pep, &preq->request); |
| else |
| num_trbs = cdns2_count_trbs(pep, preq->request.dma, |
| preq->request.length); |
| |
| ret = cdns2_prepare_ring(pdev, pep, num_trbs); |
| if (ret) |
| return ret; |
| |
| ring = &pep->ring; |
| preq->start_trb = ring->enqueue; |
| preq->trb = ring->trbs + ring->enqueue; |
| |
| if (usb_endpoint_xfer_isoc(pep->endpoint.desc)) { |
| cdns2_ep_tx_isoc(pep, preq, num_trbs); |
| } else { |
| togle_pcs = cdns2_wa1_update_guard(pep, ring->trbs + ring->enqueue); |
| cdns2_ep_tx_bulk(pep, preq, num_trbs); |
| } |
| |
| preq->num_of_trb = num_trbs; |
| |
| /* |
| * Memory barrier - cycle bit must be set as the last operation. |
| */ |
| dma_wmb(); |
| |
| /* Give the TD to the consumer. */ |
| if (togle_pcs) |
| preq->trb->control = preq->trb->control ^ cpu_to_le32(1); |
| |
| cdns2_wa1_tray_restore_cycle_bit(pdev, pep); |
| cdns2_dbg_request_trbs(pep, preq); |
| |
| if (!pep->wa1_set && !(pep->ep_state & EP_STALLED) && !pep->skip) { |
| if (pep->type == USB_ENDPOINT_XFER_ISOC) { |
| ret = cdns2_prepare_first_isoc_transfer(pdev, pep); |
| if (ret) |
| return 0; |
| } |
| |
| cdns2_set_drdy(pdev, pep); |
| } |
| |
| return 0; |
| } |
| |
| /* Prepare and start transfer for all not started requests. */ |
| static int cdns2_start_all_request(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| struct cdns2_request *preq; |
| int ret; |
| |
| while (!list_empty(&pep->deferred_list)) { |
| preq = cdns2_next_preq(&pep->deferred_list); |
| |
| ret = cdns2_ep_run_transfer(pep, preq); |
| if (ret) |
| return ret; |
| |
| list_move_tail(&preq->list, &pep->pending_list); |
| } |
| |
| pep->ep_state &= ~EP_RING_FULL; |
| |
| return 0; |
| } |
| |
| /* |
| * Check whether trb has been handled by DMA. |
| * |
| * Endpoint must be selected before invoking this function. |
| * |
| * Returns false if request has not been handled by DMA, else returns true. |
| * |
| * SR - start ring |
| * ER - end ring |
| * DQ = ring->dequeue - dequeue position |
| * EQ = ring->enqueue - enqueue position |
| * ST = preq->start_trb - index of first TRB in transfer ring |
| * ET = preq->end_trb - index of last TRB in transfer ring |
| * CI = current_index - index of processed TRB by DMA. |
| * |
| * As first step, we check if the TRB between the ST and ET. |
| * Then, we check if cycle bit for index pep->dequeue |
| * is correct. |
| * |
| * some rules: |
| * 1. ring->dequeue never equals to current_index. |
| * 2 ring->enqueue never exceed ring->dequeue |
| * 3. exception: ring->enqueue == ring->dequeue |
| * and ring->free_trbs is zero. |
| * This case indicate that TR is full. |
| * |
| * At below two cases, the request have been handled. |
| * Case 1 - ring->dequeue < current_index |
| * SR ... EQ ... DQ ... CI ... ER |
| * SR ... DQ ... CI ... EQ ... ER |
| * |
| * Case 2 - ring->dequeue > current_index |
| * This situation takes place when CI go through the LINK TRB at the end of |
| * transfer ring. |
| * SR ... CI ... EQ ... DQ ... ER |
| */ |
| static bool cdns2_trb_handled(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| struct cdns2_ring *ring; |
| struct cdns2_trb *trb; |
| int current_index = 0; |
| int handled = 0; |
| int doorbell; |
| |
| ring = &pep->ring; |
| current_index = cdns2_get_dma_pos(pdev, pep); |
| doorbell = !!(readl(&pdev->adma_regs->ep_cmd) & DMA_EP_CMD_DRDY); |
| |
| /* |
| * Only ISO transfer can use 2 entries outside the standard |
| * Transfer Ring. First of them is used as zero length packet and the |
| * second as LINK TRB. |
| */ |
| if (current_index >= TRBS_PER_SEGMENT) |
| goto finish; |
| |
| /* Current trb doesn't belong to this request. */ |
| if (preq->start_trb < preq->end_trb) { |
| if (ring->dequeue > preq->end_trb) |
| goto finish; |
| |
| if (ring->dequeue < preq->start_trb) |
| goto finish; |
| } |
| |
| if (preq->start_trb > preq->end_trb && ring->dequeue > preq->end_trb && |
| ring->dequeue < preq->start_trb) |
| goto finish; |
| |
| if (preq->start_trb == preq->end_trb && ring->dequeue != preq->end_trb) |
| goto finish; |
| |
| trb = &ring->trbs[ring->dequeue]; |
| |
| if ((le32_to_cpu(trb->control) & TRB_CYCLE) != ring->ccs) |
| goto finish; |
| |
| if (doorbell == 1 && current_index == ring->dequeue) |
| goto finish; |
| |
| /* The corner case for TRBS_PER_SEGMENT equal 2). */ |
| if (TRBS_PER_SEGMENT == 2 && pep->type != USB_ENDPOINT_XFER_ISOC) { |
| handled = 1; |
| goto finish; |
| } |
| |
| if (ring->enqueue == ring->dequeue && |
| ring->free_trbs == 0) { |
| handled = 1; |
| } else if (ring->dequeue < current_index) { |
| if ((current_index == (TRBS_PER_SEGMENT - 1)) && |
| !ring->dequeue) |
| goto finish; |
| |
| handled = 1; |
| } else if (ring->dequeue > current_index) { |
| handled = 1; |
| } |
| |
| finish: |
| trace_cdns2_request_handled(preq, current_index, handled); |
| |
| return handled; |
| } |
| |
| static void cdns2_skip_isoc_td(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep, |
| struct cdns2_request *preq) |
| { |
| struct cdns2_trb *trb; |
| int i; |
| |
| trb = pep->ring.trbs + pep->ring.dequeue; |
| |
| for (i = preq->finished_trb ; i < preq->num_of_trb; i++) { |
| preq->finished_trb++; |
| trace_cdns2_complete_trb(pep, trb); |
| cdns2_ep_inc_deq(&pep->ring); |
| trb = cdns2_next_trb(pep, trb); |
| } |
| |
| cdns2_gadget_giveback(pep, preq, 0); |
| cdns2_prepare_first_isoc_transfer(pdev, pep); |
| pep->skip = false; |
| cdns2_set_drdy(pdev, pep); |
| } |
| |
| static void cdns2_transfer_completed(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep) |
| { |
| struct cdns2_request *preq = NULL; |
| bool request_handled = false; |
| struct cdns2_trb *trb; |
| |
| while (!list_empty(&pep->pending_list)) { |
| preq = cdns2_next_preq(&pep->pending_list); |
| trb = pep->ring.trbs + pep->ring.dequeue; |
| |
| /* |
| * The TRB was changed as link TRB, and the request |
| * was handled at ep_dequeue. |
| */ |
| while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK && |
| le32_to_cpu(trb->length)) { |
| trace_cdns2_complete_trb(pep, trb); |
| cdns2_ep_inc_deq(&pep->ring); |
| trb = pep->ring.trbs + pep->ring.dequeue; |
| } |
| |
| /* |
| * Re-select endpoint. It could be changed by other CPU |
| * during handling usb_gadget_giveback_request. |
| */ |
| cdns2_select_ep(pdev, pep->endpoint.address); |
| |
| while (cdns2_trb_handled(pep, preq)) { |
| preq->finished_trb++; |
| |
| if (preq->finished_trb >= preq->num_of_trb) |
| request_handled = true; |
| |
| trb = pep->ring.trbs + pep->ring.dequeue; |
| trace_cdns2_complete_trb(pep, trb); |
| |
| if (pep->dir && pep->type == USB_ENDPOINT_XFER_ISOC) |
| /* |
| * For ISOC IN controller doens't update the |
| * trb->length. |
| */ |
| preq->request.actual = preq->request.length; |
| else |
| preq->request.actual += |
| TRB_LEN(le32_to_cpu(trb->length)); |
| |
| cdns2_ep_inc_deq(&pep->ring); |
| } |
| |
| if (request_handled) { |
| cdns2_gadget_giveback(pep, preq, 0); |
| request_handled = false; |
| } else { |
| goto prepare_next_td; |
| } |
| |
| if (pep->type != USB_ENDPOINT_XFER_ISOC && |
| TRBS_PER_SEGMENT == 2) |
| break; |
| } |
| |
| prepare_next_td: |
| if (pep->skip && preq) |
| cdns2_skip_isoc_td(pdev, pep, preq); |
| |
| if (!(pep->ep_state & EP_STALLED) && |
| !(pep->ep_state & EP_STALL_PENDING)) |
| cdns2_start_all_request(pdev, pep); |
| } |
| |
| static void cdns2_wakeup(struct cdns2_device *pdev) |
| { |
| if (!pdev->may_wakeup) |
| return; |
| |
| /* Start driving resume signaling to indicate remote wakeup. */ |
| set_reg_bit_8(&pdev->usb_regs->usbcs, USBCS_SIGRSUME); |
| } |
| |
| static void cdns2_rearm_transfer(struct cdns2_endpoint *pep, u8 rearm) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| |
| cdns2_wa1_restore_cycle_bit(pep); |
| |
| if (rearm) { |
| trace_cdns2_ring(pep); |
| |
| /* Cycle Bit must be updated before arming DMA. */ |
| dma_wmb(); |
| |
| writel(DMA_EP_CMD_DRDY, &pdev->adma_regs->ep_cmd); |
| |
| cdns2_wakeup(pdev); |
| |
| trace_cdns2_doorbell_epx(pep, |
| readl(&pdev->adma_regs->ep_traddr)); |
| } |
| } |
| |
| static void cdns2_handle_epx_interrupt(struct cdns2_endpoint *pep) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| u8 isoerror = 0; |
| u32 ep_sts_reg; |
| u32 val; |
| |
| cdns2_select_ep(pdev, pep->endpoint.address); |
| |
| trace_cdns2_epx_irq(pdev, pep); |
| |
| ep_sts_reg = readl(&pdev->adma_regs->ep_sts); |
| writel(ep_sts_reg, &pdev->adma_regs->ep_sts); |
| |
| if (pep->type == USB_ENDPOINT_XFER_ISOC) { |
| u8 mult; |
| u8 cs; |
| |
| mult = USB_EP_MAXP_MULT(pep->endpoint.desc->wMaxPacketSize); |
| cs = pep->dir ? readb(&pdev->epx_regs->ep[pep->num - 1].txcs) : |
| readb(&pdev->epx_regs->ep[pep->num - 1].rxcs); |
| if (mult > 0) |
| isoerror = EPX_CS_ERR(cs); |
| } |
| |
| /* |
| * Sometimes ISO Error for mult=1 or mult=2 is not propagated on time |
| * from USB module to DMA module. To protect against this driver |
| * checks also the txcs/rxcs registers. |
| */ |
| if ((ep_sts_reg & DMA_EP_STS_ISOERR) || isoerror) { |
| clear_reg_bit_32(&pdev->adma_regs->ep_cfg, DMA_EP_CFG_ENABLE); |
| |
| /* Wait for DBUSY cleared. */ |
| readl_poll_timeout_atomic(&pdev->adma_regs->ep_sts, val, |
| !(val & DMA_EP_STS_DBUSY), 1, 125); |
| |
| writel(DMA_EP_CMD_DFLUSH, &pep->pdev->adma_regs->ep_cmd); |
| |
| /* Wait for DFLUSH cleared. */ |
| readl_poll_timeout_atomic(&pep->pdev->adma_regs->ep_cmd, val, |
| !(val & DMA_EP_CMD_DFLUSH), 1, 10); |
| |
| pep->skip = true; |
| } |
| |
| if (ep_sts_reg & DMA_EP_STS_TRBERR || pep->skip) { |
| if (pep->ep_state & EP_STALL_PENDING && |
| !(ep_sts_reg & DMA_EP_STS_DESCMIS)) |
| cdns2_ep_stall_flush(pep); |
| |
| /* |
| * For isochronous transfer driver completes request on |
| * IOC or on TRBERR. IOC appears only when device receive |
| * OUT data packet. If host disable stream or lost some packet |
| * then the only way to finish all queued transfer is to do it |
| * on TRBERR event. |
| */ |
| if (pep->type == USB_ENDPOINT_XFER_ISOC && !pep->wa1_set) { |
| if (!pep->dir) |
| clear_reg_bit_32(&pdev->adma_regs->ep_cfg, |
| DMA_EP_CFG_ENABLE); |
| |
| cdns2_transfer_completed(pdev, pep); |
| if (pep->ep_state & EP_DEFERRED_DRDY) { |
| pep->ep_state &= ~EP_DEFERRED_DRDY; |
| cdns2_set_drdy(pdev, pep); |
| } |
| |
| return; |
| } |
| |
| cdns2_transfer_completed(pdev, pep); |
| |
| if (!(pep->ep_state & EP_STALLED) && |
| !(pep->ep_state & EP_STALL_PENDING)) { |
| if (pep->ep_state & EP_DEFERRED_DRDY) { |
| pep->ep_state &= ~EP_DEFERRED_DRDY; |
| cdns2_start_all_request(pdev, pep); |
| } else { |
| cdns2_rearm_transfer(pep, pep->wa1_set); |
| } |
| } |
| |
| return; |
| } |
| |
| if ((ep_sts_reg & DMA_EP_STS_IOC) || (ep_sts_reg & DMA_EP_STS_ISP)) |
| cdns2_transfer_completed(pdev, pep); |
| } |
| |
| static void cdns2_disconnect_gadget(struct cdns2_device *pdev) |
| { |
| if (pdev->gadget_driver && pdev->gadget_driver->disconnect) |
| pdev->gadget_driver->disconnect(&pdev->gadget); |
| } |
| |
| static irqreturn_t cdns2_usb_irq_handler(int irq, void *data) |
| { |
| struct cdns2_device *pdev = data; |
| unsigned long reg_ep_ists; |
| u8 reg_usb_irq_m; |
| u8 reg_ext_irq_m; |
| u8 reg_usb_irq; |
| u8 reg_ext_irq; |
| |
| if (pdev->in_lpm) |
| return IRQ_NONE; |
| |
| reg_usb_irq_m = readb(&pdev->interrupt_regs->usbien); |
| reg_ext_irq_m = readb(&pdev->interrupt_regs->extien); |
| |
| /* Mask all sources of interrupt. */ |
| writeb(0, &pdev->interrupt_regs->usbien); |
| writeb(0, &pdev->interrupt_regs->extien); |
| writel(0, &pdev->adma_regs->ep_ien); |
| |
| /* Clear interrupt sources. */ |
| writel(0, &pdev->adma_regs->ep_sts); |
| writeb(0, &pdev->interrupt_regs->usbirq); |
| writeb(0, &pdev->interrupt_regs->extirq); |
| |
| reg_ep_ists = readl(&pdev->adma_regs->ep_ists); |
| reg_usb_irq = readb(&pdev->interrupt_regs->usbirq); |
| reg_ext_irq = readb(&pdev->interrupt_regs->extirq); |
| |
| if (reg_ep_ists || (reg_usb_irq & reg_usb_irq_m) || |
| (reg_ext_irq & reg_ext_irq_m)) |
| return IRQ_WAKE_THREAD; |
| |
| writeb(USB_IEN_INIT, &pdev->interrupt_regs->usbien); |
| writeb(EXTIRQ_WAKEUP, &pdev->interrupt_regs->extien); |
| writel(~0, &pdev->adma_regs->ep_ien); |
| |
| return IRQ_NONE; |
| } |
| |
| static irqreturn_t cdns2_thread_usb_irq_handler(struct cdns2_device *pdev) |
| { |
| u8 usb_irq, ext_irq; |
| int speed; |
| int i; |
| |
| ext_irq = readb(&pdev->interrupt_regs->extirq) & EXTIRQ_WAKEUP; |
| writeb(ext_irq, &pdev->interrupt_regs->extirq); |
| |
| usb_irq = readb(&pdev->interrupt_regs->usbirq) & USB_IEN_INIT; |
| writeb(usb_irq, &pdev->interrupt_regs->usbirq); |
| |
| if (!ext_irq && !usb_irq) |
| return IRQ_NONE; |
| |
| trace_cdns2_usb_irq(usb_irq, ext_irq); |
| |
| if (ext_irq & EXTIRQ_WAKEUP) { |
| if (pdev->gadget_driver && pdev->gadget_driver->resume) { |
| spin_unlock(&pdev->lock); |
| pdev->gadget_driver->resume(&pdev->gadget); |
| spin_lock(&pdev->lock); |
| } |
| } |
| |
| if (usb_irq & USBIRQ_LPM) { |
| u8 reg = readb(&pdev->usb_regs->lpmctrl); |
| |
| /* LPM1 enter */ |
| if (!(reg & LPMCTRLLH_LPMNYET)) |
| writeb(0, &pdev->usb_regs->sleep_clkgate); |
| } |
| |
| if (usb_irq & USBIRQ_SUSPEND) { |
| if (pdev->gadget_driver && pdev->gadget_driver->suspend) { |
| spin_unlock(&pdev->lock); |
| pdev->gadget_driver->suspend(&pdev->gadget); |
| spin_lock(&pdev->lock); |
| } |
| } |
| |
| if (usb_irq & USBIRQ_URESET) { |
| if (pdev->gadget_driver) { |
| pdev->dev_address = 0; |
| |
| spin_unlock(&pdev->lock); |
| usb_gadget_udc_reset(&pdev->gadget, |
| pdev->gadget_driver); |
| spin_lock(&pdev->lock); |
| |
| /* |
| * The USBIRQ_URESET is reported at the beginning of |
| * reset signal. 100ms is enough time to finish reset |
| * process. For high-speed reset procedure is completed |
| * when controller detect HS mode. |
| */ |
| for (i = 0; i < 100; i++) { |
| mdelay(1); |
| speed = cdns2_get_speed(pdev); |
| if (speed == USB_SPEED_HIGH) |
| break; |
| } |
| |
| pdev->gadget.speed = speed; |
| cdns2_enable_l1(pdev, 0); |
| cdns2_ep0_config(pdev); |
| pdev->may_wakeup = 0; |
| } |
| } |
| |
| if (usb_irq & USBIRQ_SUDAV) { |
| pdev->ep0_stage = CDNS2_SETUP_STAGE; |
| cdns2_handle_setup_packet(pdev); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Deferred USB interrupt handler. */ |
| static irqreturn_t cdns2_thread_irq_handler(int irq, void *data) |
| { |
| struct cdns2_device *pdev = data; |
| unsigned long dma_ep_ists; |
| unsigned long flags; |
| unsigned int bit; |
| |
| local_bh_disable(); |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| cdns2_thread_usb_irq_handler(pdev); |
| |
| dma_ep_ists = readl(&pdev->adma_regs->ep_ists); |
| if (!dma_ep_ists) |
| goto unlock; |
| |
| trace_cdns2_dma_ep_ists(dma_ep_ists); |
| |
| /* Handle default endpoint OUT. */ |
| if (dma_ep_ists & DMA_EP_ISTS_EP_OUT0) |
| cdns2_handle_ep0_interrupt(pdev, USB_DIR_OUT); |
| |
| /* Handle default endpoint IN. */ |
| if (dma_ep_ists & DMA_EP_ISTS_EP_IN0) |
| cdns2_handle_ep0_interrupt(pdev, USB_DIR_IN); |
| |
| dma_ep_ists &= ~(DMA_EP_ISTS_EP_OUT0 | DMA_EP_ISTS_EP_IN0); |
| |
| for_each_set_bit(bit, &dma_ep_ists, sizeof(u32) * BITS_PER_BYTE) { |
| u8 ep_idx = bit > 16 ? (bit - 16) * 2 : (bit * 2) - 1; |
| |
| /* |
| * Endpoints in pdev->eps[] are held in order: |
| * ep0, ep1out, ep1in, ep2out, ep2in... ep15out, ep15in. |
| * but in dma_ep_ists in order: |
| * ep0 ep1out ep2out ... ep15out ep0in ep1in .. ep15in |
| */ |
| cdns2_handle_epx_interrupt(&pdev->eps[ep_idx]); |
| } |
| |
| unlock: |
| writel(~0, &pdev->adma_regs->ep_ien); |
| writeb(USB_IEN_INIT, &pdev->interrupt_regs->usbien); |
| writeb(EXTIRQ_WAKEUP, &pdev->interrupt_regs->extien); |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| local_bh_enable(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Calculates and assigns onchip memory for endpoints. */ |
| static void cdns2_eps_onchip_buffer_init(struct cdns2_device *pdev) |
| { |
| struct cdns2_endpoint *pep; |
| int min_buf_tx = 0; |
| int min_buf_rx = 0; |
| u16 tx_offset = 0; |
| u16 rx_offset = 0; |
| int free; |
| int i; |
| |
| for (i = 0; i < CDNS2_ENDPOINTS_NUM; i++) { |
| pep = &pdev->eps[i]; |
| |
| if (!(pep->ep_state & EP_CLAIMED)) |
| continue; |
| |
| if (pep->dir) |
| min_buf_tx += pep->buffering; |
| else |
| min_buf_rx += pep->buffering; |
| } |
| |
| for (i = 0; i < CDNS2_ENDPOINTS_NUM; i++) { |
| pep = &pdev->eps[i]; |
| |
| if (!(pep->ep_state & EP_CLAIMED)) |
| continue; |
| |
| if (pep->dir) { |
| free = pdev->onchip_tx_buf - min_buf_tx; |
| |
| if (free + pep->buffering >= 4) |
| free = 4; |
| else |
| free = free + pep->buffering; |
| |
| min_buf_tx = min_buf_tx - pep->buffering + free; |
| |
| pep->buffering = free; |
| |
| writel(tx_offset, |
| &pdev->epx_regs->txstaddr[pep->num - 1]); |
| pdev->epx_regs->txstaddr[pep->num - 1] = tx_offset; |
| |
| dev_dbg(pdev->dev, "%s onchip address %04x, buffering: %d\n", |
| pep->name, tx_offset, pep->buffering); |
| |
| tx_offset += pep->buffering * 1024; |
| } else { |
| free = pdev->onchip_rx_buf - min_buf_rx; |
| |
| if (free + pep->buffering >= 4) |
| free = 4; |
| else |
| free = free + pep->buffering; |
| |
| min_buf_rx = min_buf_rx - pep->buffering + free; |
| |
| pep->buffering = free; |
| writel(rx_offset, |
| &pdev->epx_regs->rxstaddr[pep->num - 1]); |
| |
| dev_dbg(pdev->dev, "%s onchip address %04x, buffering: %d\n", |
| pep->name, rx_offset, pep->buffering); |
| |
| rx_offset += pep->buffering * 1024; |
| } |
| } |
| } |
| |
| /* Configure hardware endpoint. */ |
| static int cdns2_ep_config(struct cdns2_endpoint *pep, bool enable) |
| { |
| bool is_iso_ep = (pep->type == USB_ENDPOINT_XFER_ISOC); |
| struct cdns2_device *pdev = pep->pdev; |
| u32 max_packet_size; |
| u8 dir = 0; |
| u8 ep_cfg; |
| u8 mult; |
| u32 val; |
| int ret; |
| |
| switch (pep->type) { |
| case USB_ENDPOINT_XFER_INT: |
| ep_cfg = EPX_CON_TYPE_INT; |
| break; |
| case USB_ENDPOINT_XFER_BULK: |
| ep_cfg = EPX_CON_TYPE_BULK; |
| break; |
| default: |
| mult = USB_EP_MAXP_MULT(pep->endpoint.desc->wMaxPacketSize); |
| ep_cfg = mult << EPX_CON_ISOD_SHIFT; |
| ep_cfg |= EPX_CON_TYPE_ISOC; |
| |
| if (pep->dir) { |
| set_reg_bit_8(&pdev->epx_regs->isoautoarm, BIT(pep->num)); |
| set_reg_bit_8(&pdev->epx_regs->isoautodump, BIT(pep->num)); |
| set_reg_bit_8(&pdev->epx_regs->isodctrl, BIT(pep->num)); |
| } |
| } |
| |
| switch (pdev->gadget.speed) { |
| case USB_SPEED_FULL: |
| max_packet_size = is_iso_ep ? 1023 : 64; |
| break; |
| case USB_SPEED_HIGH: |
| max_packet_size = is_iso_ep ? 1024 : 512; |
| break; |
| default: |
| /* All other speed are not supported. */ |
| return -EINVAL; |
| } |
| |
| ep_cfg |= (EPX_CON_VAL | (pep->buffering - 1)); |
| |
| if (pep->dir) { |
| dir = FIFOCTRL_IO_TX; |
| writew(max_packet_size, &pdev->epx_regs->txmaxpack[pep->num - 1]); |
| writeb(ep_cfg, &pdev->epx_regs->ep[pep->num - 1].txcon); |
| } else { |
| writew(max_packet_size, &pdev->epx_regs->rxmaxpack[pep->num - 1]); |
| writeb(ep_cfg, &pdev->epx_regs->ep[pep->num - 1].rxcon); |
| } |
| |
| writeb(pep->num | dir | FIFOCTRL_FIFOAUTO, |
| &pdev->usb_regs->fifoctrl); |
| writeb(pep->num | dir, &pdev->epx_regs->endprst); |
| writeb(pep->num | ENDPRST_FIFORST | ENDPRST_TOGRST | dir, |
| &pdev->epx_regs->endprst); |
| |
| if (max_packet_size == 1024) |
| pep->trb_burst_size = 128; |
| else if (max_packet_size >= 512) |
| pep->trb_burst_size = 64; |
| else |
| pep->trb_burst_size = 16; |
| |
| cdns2_select_ep(pdev, pep->num | pep->dir); |
| writel(DMA_EP_CMD_EPRST | DMA_EP_CMD_DFLUSH, &pdev->adma_regs->ep_cmd); |
| |
| ret = readl_poll_timeout_atomic(&pdev->adma_regs->ep_cmd, val, |
| !(val & (DMA_EP_CMD_DFLUSH | |
| DMA_EP_CMD_EPRST)), |
| 1, 1000); |
| |
| if (ret) |
| return ret; |
| |
| writel(DMA_EP_STS_TRBERR | DMA_EP_STS_ISOERR, &pdev->adma_regs->ep_sts_en); |
| |
| if (enable) |
| writel(DMA_EP_CFG_ENABLE, &pdev->adma_regs->ep_cfg); |
| |
| trace_cdns2_epx_hw_cfg(pdev, pep); |
| |
| dev_dbg(pdev->dev, "Configure %s: with MPS: %08x, ep con: %02x\n", |
| pep->name, max_packet_size, ep_cfg); |
| |
| return 0; |
| } |
| |
| struct usb_request *cdns2_gadget_ep_alloc_request(struct usb_ep *ep, |
| gfp_t gfp_flags) |
| { |
| struct cdns2_endpoint *pep = ep_to_cdns2_ep(ep); |
| struct cdns2_request *preq; |
| |
| preq = kzalloc(sizeof(*preq), gfp_flags); |
| if (!preq) |
| return NULL; |
| |
| preq->pep = pep; |
| |
| trace_cdns2_alloc_request(preq); |
| |
| return &preq->request; |
| } |
| |
| void cdns2_gadget_ep_free_request(struct usb_ep *ep, |
| struct usb_request *request) |
| { |
| struct cdns2_request *preq = to_cdns2_request(request); |
| |
| trace_cdns2_free_request(preq); |
| kfree(preq); |
| } |
| |
| static int cdns2_gadget_ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| u32 reg = DMA_EP_STS_EN_TRBERREN; |
| struct cdns2_endpoint *pep; |
| struct cdns2_device *pdev; |
| unsigned long flags; |
| int enable = 1; |
| int ret = 0; |
| |
| if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT || |
| !desc->wMaxPacketSize) { |
| return -EINVAL; |
| } |
| |
| pep = ep_to_cdns2_ep(ep); |
| pdev = pep->pdev; |
| |
| if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED, |
| "%s is already enabled\n", pep->name)) |
| return 0; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| pep->type = usb_endpoint_type(desc); |
| pep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0; |
| |
| if (pdev->gadget.speed == USB_SPEED_FULL) |
| if (pep->type == USB_ENDPOINT_XFER_INT) |
| pep->interval = desc->bInterval; |
| |
| if (pep->interval > ISO_MAX_INTERVAL && |
| pep->type == USB_ENDPOINT_XFER_ISOC) { |
| dev_err(pdev->dev, "ISO period is limited to %d (current: %d)\n", |
| ISO_MAX_INTERVAL, pep->interval); |
| |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* |
| * During ISO OUT traffic DMA reads Transfer Ring for the EP which has |
| * never got doorbell. |
| * This issue was detected only on simulation, but to avoid this issue |
| * driver add protection against it. To fix it driver enable ISO OUT |
| * endpoint before setting DRBL. This special treatment of ISO OUT |
| * endpoints are recommended by controller specification. |
| */ |
| if (pep->type == USB_ENDPOINT_XFER_ISOC && !pep->dir) |
| enable = 0; |
| |
| ret = cdns2_alloc_tr_segment(pep); |
| if (ret) |
| goto exit; |
| |
| ret = cdns2_ep_config(pep, enable); |
| if (ret) { |
| cdns2_free_tr_segment(pep); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| trace_cdns2_gadget_ep_enable(pep); |
| |
| pep->ep_state &= ~(EP_STALLED | EP_STALL_PENDING); |
| pep->ep_state |= EP_ENABLED; |
| pep->wa1_set = 0; |
| pep->ring.enqueue = 0; |
| pep->ring.dequeue = 0; |
| reg = readl(&pdev->adma_regs->ep_sts); |
| pep->ring.pcs = !!DMA_EP_STS_CCS(reg); |
| pep->ring.ccs = !!DMA_EP_STS_CCS(reg); |
| |
| writel(pep->ring.dma, &pdev->adma_regs->ep_traddr); |
| |
| /* one TRB is reserved for link TRB used in DMULT mode*/ |
| pep->ring.free_trbs = TRBS_PER_SEGMENT - 1; |
| |
| exit: |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return ret; |
| } |
| |
| static int cdns2_gadget_ep_disable(struct usb_ep *ep) |
| { |
| struct cdns2_endpoint *pep; |
| struct cdns2_request *preq; |
| struct cdns2_device *pdev; |
| unsigned long flags; |
| int val; |
| |
| if (!ep) |
| return -EINVAL; |
| |
| pep = ep_to_cdns2_ep(ep); |
| pdev = pep->pdev; |
| |
| if (dev_WARN_ONCE(pdev->dev, !(pep->ep_state & EP_ENABLED), |
| "%s is already disabled\n", pep->name)) |
| return 0; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| trace_cdns2_gadget_ep_disable(pep); |
| |
| cdns2_select_ep(pdev, ep->desc->bEndpointAddress); |
| |
| clear_reg_bit_32(&pdev->adma_regs->ep_cfg, DMA_EP_CFG_ENABLE); |
| |
| /* |
| * Driver needs some time before resetting endpoint. |
| * It need waits for clearing DBUSY bit or for timeout expired. |
| * 10us is enough time for controller to stop transfer. |
| */ |
| readl_poll_timeout_atomic(&pdev->adma_regs->ep_sts, val, |
| !(val & DMA_EP_STS_DBUSY), 1, 10); |
| writel(DMA_EP_CMD_EPRST, &pdev->adma_regs->ep_cmd); |
| |
| readl_poll_timeout_atomic(&pdev->adma_regs->ep_cmd, val, |
| !(val & (DMA_EP_CMD_DFLUSH | DMA_EP_CMD_EPRST)), |
| 1, 1000); |
| |
| while (!list_empty(&pep->pending_list)) { |
| preq = cdns2_next_preq(&pep->pending_list); |
| cdns2_gadget_giveback(pep, preq, -ESHUTDOWN); |
| } |
| |
| while (!list_empty(&pep->deferred_list)) { |
| preq = cdns2_next_preq(&pep->deferred_list); |
| cdns2_gadget_giveback(pep, preq, -ESHUTDOWN); |
| } |
| |
| ep->desc = NULL; |
| pep->ep_state &= ~EP_ENABLED; |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| static int cdns2_ep_enqueue(struct cdns2_endpoint *pep, |
| struct cdns2_request *preq, |
| gfp_t gfp_flags) |
| { |
| struct cdns2_device *pdev = pep->pdev; |
| struct usb_request *request; |
| int ret; |
| |
| request = &preq->request; |
| request->actual = 0; |
| request->status = -EINPROGRESS; |
| |
| ret = usb_gadget_map_request_by_dev(pdev->dev, request, pep->dir); |
| if (ret) { |
| trace_cdns2_request_enqueue_error(preq); |
| return ret; |
| } |
| |
| list_add_tail(&preq->list, &pep->deferred_list); |
| trace_cdns2_request_enqueue(preq); |
| |
| if (!(pep->ep_state & EP_STALLED) && !(pep->ep_state & EP_STALL_PENDING)) |
| cdns2_start_all_request(pdev, pep); |
| |
| return 0; |
| } |
| |
| static int cdns2_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, |
| gfp_t gfp_flags) |
| { |
| struct usb_request *zlp_request; |
| struct cdns2_request *preq; |
| struct cdns2_endpoint *pep; |
| struct cdns2_device *pdev; |
| unsigned long flags; |
| int ret; |
| |
| if (!request || !ep) |
| return -EINVAL; |
| |
| pep = ep_to_cdns2_ep(ep); |
| pdev = pep->pdev; |
| |
| if (!(pep->ep_state & EP_ENABLED)) { |
| dev_err(pdev->dev, "%s: can't queue to disabled endpoint\n", |
| pep->name); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| preq = to_cdns2_request(request); |
| ret = cdns2_ep_enqueue(pep, preq, gfp_flags); |
| |
| if (ret == 0 && request->zero && request->length && |
| (request->length % ep->maxpacket == 0)) { |
| struct cdns2_request *preq; |
| |
| zlp_request = cdns2_gadget_ep_alloc_request(ep, GFP_ATOMIC); |
| zlp_request->buf = pdev->zlp_buf; |
| zlp_request->length = 0; |
| |
| preq = to_cdns2_request(zlp_request); |
| ret = cdns2_ep_enqueue(pep, preq, gfp_flags); |
| } |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| return ret; |
| } |
| |
| int cdns2_gadget_ep_dequeue(struct usb_ep *ep, |
| struct usb_request *request) |
| { |
| struct cdns2_request *preq, *preq_temp, *cur_preq; |
| struct cdns2_endpoint *pep; |
| struct cdns2_trb *link_trb; |
| u8 req_on_hw_ring = 0; |
| unsigned long flags; |
| u32 buffer; |
| int val, i; |
| |
| if (!ep || !request || !ep->desc) |
| return -EINVAL; |
| |
| pep = ep_to_cdns2_ep(ep); |
| if (!pep->endpoint.desc) { |
| dev_err(pep->pdev->dev, "%s: can't dequeue to disabled endpoint\n", |
| pep->name); |
| return -ESHUTDOWN; |
| } |
| |
| /* Requests has been dequeued during disabling endpoint. */ |
| if (!(pep->ep_state & EP_ENABLED)) |
| return 0; |
| |
| spin_lock_irqsave(&pep->pdev->lock, flags); |
| |
| cur_preq = to_cdns2_request(request); |
| trace_cdns2_request_dequeue(cur_preq); |
| |
| list_for_each_entry_safe(preq, preq_temp, &pep->pending_list, list) { |
| if (cur_preq == preq) { |
| req_on_hw_ring = 1; |
| goto found; |
| } |
| } |
| |
| list_for_each_entry_safe(preq, preq_temp, &pep->deferred_list, list) { |
| if (cur_preq == preq) |
| goto found; |
| } |
| |
| goto not_found; |
| |
| found: |
| link_trb = preq->trb; |
| |
| /* Update ring only if removed request is on pending_req_list list. */ |
| if (req_on_hw_ring && link_trb) { |
| /* Stop DMA */ |
| writel(DMA_EP_CMD_DFLUSH, &pep->pdev->adma_regs->ep_cmd); |
| |
| /* Wait for DFLUSH cleared. */ |
| readl_poll_timeout_atomic(&pep->pdev->adma_regs->ep_cmd, val, |
| !(val & DMA_EP_CMD_DFLUSH), 1, 1000); |
| |
| buffer = cpu_to_le32(TRB_BUFFER(pep->ring.dma + |
| ((preq->end_trb + 1) * TRB_SIZE))); |
| |
| for (i = 0; i < preq->num_of_trb; i++) { |
| link_trb->buffer = buffer; |
| link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) |
| & TRB_CYCLE) | TRB_CHAIN | |
| TRB_TYPE(TRB_LINK)); |
| |
| trace_cdns2_queue_trb(pep, link_trb); |
| link_trb = cdns2_next_trb(pep, link_trb); |
| } |
| |
| if (pep->wa1_trb == preq->trb) |
| cdns2_wa1_restore_cycle_bit(pep); |
| } |
| |
| cdns2_gadget_giveback(pep, cur_preq, -ECONNRESET); |
| |
| preq = cdns2_next_preq(&pep->pending_list); |
| if (preq) |
| cdns2_rearm_transfer(pep, 1); |
| |
| not_found: |
| spin_unlock_irqrestore(&pep->pdev->lock, flags); |
| return 0; |
| } |
| |
| int cdns2_halt_endpoint(struct cdns2_device *pdev, |
| struct cdns2_endpoint *pep, |
| int value) |
| { |
| u8 __iomem *conf; |
| int dir = 0; |
| |
| if (!(pep->ep_state & EP_ENABLED)) |
| return -EPERM; |
| |
| if (pep->dir) { |
| dir = ENDPRST_IO_TX; |
| conf = &pdev->epx_regs->ep[pep->num - 1].txcon; |
| } else { |
| conf = &pdev->epx_regs->ep[pep->num - 1].rxcon; |
| } |
| |
| if (!value) { |
| struct cdns2_trb *trb = NULL; |
| struct cdns2_request *preq; |
| struct cdns2_trb trb_tmp; |
| |
| preq = cdns2_next_preq(&pep->pending_list); |
| if (preq) { |
| trb = preq->trb; |
| if (trb) { |
| trb_tmp = *trb; |
| trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE); |
| } |
| } |
| |
| trace_cdns2_ep_halt(pep, 0, 0); |
| |
| /* Resets Sequence Number */ |
| writeb(dir | pep->num, &pdev->epx_regs->endprst); |
| writeb(dir | ENDPRST_TOGRST | pep->num, |
| &pdev->epx_regs->endprst); |
| |
| clear_reg_bit_8(conf, EPX_CON_STALL); |
| |
| pep->ep_state &= ~(EP_STALLED | EP_STALL_PENDING); |
| |
| if (preq) { |
| if (trb) |
| *trb = trb_tmp; |
| |
| cdns2_rearm_transfer(pep, 1); |
| } |
| |
| cdns2_start_all_request(pdev, pep); |
| } else { |
| trace_cdns2_ep_halt(pep, 1, 0); |
| set_reg_bit_8(conf, EPX_CON_STALL); |
| writeb(dir | pep->num, &pdev->epx_regs->endprst); |
| writeb(dir | ENDPRST_FIFORST | pep->num, |
| &pdev->epx_regs->endprst); |
| pep->ep_state |= EP_STALLED; |
| } |
| |
| return 0; |
| } |
| |
| /* Sets/clears stall on selected endpoint. */ |
| static int cdns2_gadget_ep_set_halt(struct usb_ep *ep, int value) |
| { |
| struct cdns2_endpoint *pep = ep_to_cdns2_ep(ep); |
| struct cdns2_device *pdev = pep->pdev; |
| struct cdns2_request *preq; |
| unsigned long flags = 0; |
| int ret; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| preq = cdns2_next_preq(&pep->pending_list); |
| if (value && preq) { |
| trace_cdns2_ep_busy_try_halt_again(pep); |
| ret = -EAGAIN; |
| goto done; |
| } |
| |
| if (!value) |
| pep->ep_state &= ~EP_WEDGE; |
| |
| ret = cdns2_halt_endpoint(pdev, pep, value); |
| |
| done: |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| return ret; |
| } |
| |
| static int cdns2_gadget_ep_set_wedge(struct usb_ep *ep) |
| { |
| struct cdns2_endpoint *pep = ep_to_cdns2_ep(ep); |
| |
| cdns2_gadget_ep_set_halt(ep, 1); |
| pep->ep_state |= EP_WEDGE; |
| |
| return 0; |
| } |
| |
| static struct |
| cdns2_endpoint *cdns2_find_available_ep(struct cdns2_device *pdev, |
| struct usb_endpoint_descriptor *desc) |
| { |
| struct cdns2_endpoint *pep; |
| struct usb_ep *ep; |
| int ep_correct; |
| |
| list_for_each_entry(ep, &pdev->gadget.ep_list, ep_list) { |
| unsigned long num; |
| int ret; |
| /* ep name pattern likes epXin or epXout. */ |
| char c[2] = {ep->name[2], '\0'}; |
| |
| ret = kstrtoul(c, 10, &num); |
| if (ret) |
| return ERR_PTR(ret); |
| pep = ep_to_cdns2_ep(ep); |
| |
| if (pep->num != num) |
| continue; |
| |
| ep_correct = (pep->endpoint.caps.dir_in && |
| usb_endpoint_dir_in(desc)) || |
| (pep->endpoint.caps.dir_out && |
| usb_endpoint_dir_out(desc)); |
| |
| if (ep_correct && !(pep->ep_state & EP_CLAIMED)) |
| return pep; |
| } |
| |
| return ERR_PTR(-ENOENT); |
| } |
| |
| /* |
| * Function used to recognize which endpoints will be used to optimize |
| * on-chip memory usage. |
| */ |
| static struct |
| usb_ep *cdns2_gadget_match_ep(struct usb_gadget *gadget, |
| struct usb_endpoint_descriptor *desc, |
| struct usb_ss_ep_comp_descriptor *comp_desc) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| struct cdns2_endpoint *pep; |
| unsigned long flags; |
| |
| pep = cdns2_find_available_ep(pdev, desc); |
| if (IS_ERR(pep)) { |
| dev_err(pdev->dev, "no available ep\n"); |
| return NULL; |
| } |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC) |
| pep->buffering = 4; |
| else |
| pep->buffering = 1; |
| |
| pep->ep_state |= EP_CLAIMED; |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return &pep->endpoint; |
| } |
| |
| static const struct usb_ep_ops cdns2_gadget_ep_ops = { |
| .enable = cdns2_gadget_ep_enable, |
| .disable = cdns2_gadget_ep_disable, |
| .alloc_request = cdns2_gadget_ep_alloc_request, |
| .free_request = cdns2_gadget_ep_free_request, |
| .queue = cdns2_gadget_ep_queue, |
| .dequeue = cdns2_gadget_ep_dequeue, |
| .set_halt = cdns2_gadget_ep_set_halt, |
| .set_wedge = cdns2_gadget_ep_set_wedge, |
| }; |
| |
| static int cdns2_gadget_get_frame(struct usb_gadget *gadget) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| |
| return readw(&pdev->usb_regs->frmnr); |
| } |
| |
| static int cdns2_gadget_wakeup(struct usb_gadget *gadget) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| cdns2_wakeup(pdev); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| static int cdns2_gadget_set_selfpowered(struct usb_gadget *gadget, |
| int is_selfpowered) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| pdev->is_selfpowered = !!is_selfpowered; |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| return 0; |
| } |
| |
| /* Disable interrupts and begin the controller halting process. */ |
| static void cdns2_quiesce(struct cdns2_device *pdev) |
| { |
| set_reg_bit_8(&pdev->usb_regs->usbcs, USBCS_DISCON); |
| |
| /* Disable interrupt. */ |
| writeb(0, &pdev->interrupt_regs->extien); |
| writeb(0, &pdev->interrupt_regs->usbien); |
| writew(0, &pdev->adma_regs->ep_ien); |
| |
| /* Clear interrupt line. */ |
| writeb(0x0, &pdev->interrupt_regs->usbirq); |
| } |
| |
| static void cdns2_gadget_config(struct cdns2_device *pdev) |
| { |
| cdns2_ep0_config(pdev); |
| |
| /* Enable DMA interrupts for all endpoints. */ |
| writel(~0x0, &pdev->adma_regs->ep_ien); |
| cdns2_enable_l1(pdev, 0); |
| writeb(USB_IEN_INIT, &pdev->interrupt_regs->usbien); |
| writeb(EXTIRQ_WAKEUP, &pdev->interrupt_regs->extien); |
| writel(DMA_CONF_DMULT, &pdev->adma_regs->conf); |
| } |
| |
| static int cdns2_gadget_pullup(struct usb_gadget *gadget, int is_on) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| unsigned long flags; |
| |
| trace_cdns2_pullup(is_on); |
| |
| /* |
| * Disable events handling while controller is being |
| * enabled/disabled. |
| */ |
| disable_irq(pdev->irq); |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| if (is_on) { |
| cdns2_gadget_config(pdev); |
| clear_reg_bit_8(&pdev->usb_regs->usbcs, USBCS_DISCON); |
| } else { |
| cdns2_quiesce(pdev); |
| } |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| enable_irq(pdev->irq); |
| |
| return 0; |
| } |
| |
| static int cdns2_gadget_udc_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| enum usb_device_speed max_speed = driver->max_speed; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| pdev->gadget_driver = driver; |
| |
| /* Limit speed if necessary. */ |
| max_speed = min(driver->max_speed, gadget->max_speed); |
| |
| switch (max_speed) { |
| case USB_SPEED_FULL: |
| writeb(SPEEDCTRL_HSDISABLE, &pdev->usb_regs->speedctrl); |
| break; |
| case USB_SPEED_HIGH: |
| writeb(0, &pdev->usb_regs->speedctrl); |
| break; |
| default: |
| dev_err(pdev->dev, "invalid maximum_speed parameter %d\n", |
| max_speed); |
| fallthrough; |
| case USB_SPEED_UNKNOWN: |
| /* Default to highspeed. */ |
| max_speed = USB_SPEED_HIGH; |
| break; |
| } |
| |
| /* Reset all USB endpoints. */ |
| writeb(ENDPRST_IO_TX, &pdev->usb_regs->endprst); |
| writeb(ENDPRST_FIFORST | ENDPRST_TOGRST | ENDPRST_IO_TX, |
| &pdev->usb_regs->endprst); |
| writeb(ENDPRST_FIFORST | ENDPRST_TOGRST, &pdev->usb_regs->endprst); |
| |
| cdns2_eps_onchip_buffer_init(pdev); |
| |
| cdns2_gadget_config(pdev); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| static int cdns2_gadget_udc_stop(struct usb_gadget *gadget) |
| { |
| struct cdns2_device *pdev = gadget_to_cdns2_device(gadget); |
| struct cdns2_endpoint *pep; |
| u32 bEndpointAddress; |
| struct usb_ep *ep; |
| int val; |
| |
| pdev->gadget_driver = NULL; |
| pdev->gadget.speed = USB_SPEED_UNKNOWN; |
| |
| list_for_each_entry(ep, &pdev->gadget.ep_list, ep_list) { |
| pep = ep_to_cdns2_ep(ep); |
| bEndpointAddress = pep->num | pep->dir; |
| cdns2_select_ep(pdev, bEndpointAddress); |
| writel(DMA_EP_CMD_EPRST, &pdev->adma_regs->ep_cmd); |
| readl_poll_timeout_atomic(&pdev->adma_regs->ep_cmd, val, |
| !(val & DMA_EP_CMD_EPRST), 1, 100); |
| } |
| |
| cdns2_quiesce(pdev); |
| |
| writeb(ENDPRST_IO_TX, &pdev->usb_regs->endprst); |
| writeb(ENDPRST_FIFORST | ENDPRST_TOGRST | ENDPRST_IO_TX, |
| &pdev->epx_regs->endprst); |
| writeb(ENDPRST_FIFORST | ENDPRST_TOGRST, &pdev->epx_regs->endprst); |
| |
| return 0; |
| } |
| |
| static const struct usb_gadget_ops cdns2_gadget_ops = { |
| .get_frame = cdns2_gadget_get_frame, |
| .wakeup = cdns2_gadget_wakeup, |
| .set_selfpowered = cdns2_gadget_set_selfpowered, |
| .pullup = cdns2_gadget_pullup, |
| .udc_start = cdns2_gadget_udc_start, |
| .udc_stop = cdns2_gadget_udc_stop, |
| .match_ep = cdns2_gadget_match_ep, |
| }; |
| |
| static void cdns2_free_all_eps(struct cdns2_device *pdev) |
| { |
| int i; |
| |
| for (i = 0; i < CDNS2_ENDPOINTS_NUM; i++) |
| cdns2_free_tr_segment(&pdev->eps[i]); |
| } |
| |
| /* Initializes software endpoints of gadget. */ |
| static int cdns2_init_eps(struct cdns2_device *pdev) |
| { |
| struct cdns2_endpoint *pep; |
| int i; |
| |
| for (i = 0; i < CDNS2_ENDPOINTS_NUM; i++) { |
| bool direction = !(i & 1); /* Start from OUT endpoint. */ |
| u8 epnum = ((i + 1) >> 1); |
| |
| /* |
| * Endpoints are being held in pdev->eps[] in form: |
| * ep0, ep1out, ep1in ... ep15out, ep15in. |
| */ |
| if (!CDNS2_IF_EP_EXIST(pdev, epnum, direction)) |
| continue; |
| |
| pep = &pdev->eps[i]; |
| pep->pdev = pdev; |
| pep->num = epnum; |
| /* 0 for OUT, 1 for IN. */ |
| pep->dir = direction ? USB_DIR_IN : USB_DIR_OUT; |
| pep->idx = i; |
| |
| /* Ep0in and ep0out are represented by pdev->eps[0]. */ |
| if (!epnum) { |
| int ret; |
| |
| snprintf(pep->name, sizeof(pep->name), "ep%d%s", |
| epnum, "BiDir"); |
| |
| cdns2_init_ep0(pdev, pep); |
| |
| ret = cdns2_alloc_tr_segment(pep); |
| if (ret) { |
| dev_err(pdev->dev, "Failed to init ep0\n"); |
| return ret; |
| } |
| } else { |
| snprintf(pep->name, sizeof(pep->name), "ep%d%s", |
| epnum, !!direction ? "in" : "out"); |
| pep->endpoint.name = pep->name; |
| |
| usb_ep_set_maxpacket_limit(&pep->endpoint, 1024); |
| pep->endpoint.ops = &cdns2_gadget_ep_ops; |
| list_add_tail(&pep->endpoint.ep_list, &pdev->gadget.ep_list); |
| |
| pep->endpoint.caps.dir_in = direction; |
| pep->endpoint.caps.dir_out = !direction; |
| |
| pep->endpoint.caps.type_iso = 1; |
| pep->endpoint.caps.type_bulk = 1; |
| pep->endpoint.caps.type_int = 1; |
| } |
| |
| pep->endpoint.name = pep->name; |
| pep->ep_state = 0; |
| |
| dev_dbg(pdev->dev, "Init %s, SupType: CTRL: %s, INT: %s, " |
| "BULK: %s, ISOC %s, SupDir IN: %s, OUT: %s\n", |
| pep->name, |
| (pep->endpoint.caps.type_control) ? "yes" : "no", |
| (pep->endpoint.caps.type_int) ? "yes" : "no", |
| (pep->endpoint.caps.type_bulk) ? "yes" : "no", |
| (pep->endpoint.caps.type_iso) ? "yes" : "no", |
| (pep->endpoint.caps.dir_in) ? "yes" : "no", |
| (pep->endpoint.caps.dir_out) ? "yes" : "no"); |
| |
| INIT_LIST_HEAD(&pep->pending_list); |
| INIT_LIST_HEAD(&pep->deferred_list); |
| } |
| |
| return 0; |
| } |
| |
| static int cdns2_gadget_start(struct cdns2_device *pdev) |
| { |
| u32 max_speed; |
| void *buf; |
| int ret; |
| |
| pdev->usb_regs = pdev->regs; |
| pdev->ep0_regs = pdev->regs; |
| pdev->epx_regs = pdev->regs; |
| pdev->interrupt_regs = pdev->regs; |
| pdev->adma_regs = pdev->regs + CDNS2_ADMA_REGS_OFFSET; |
| |
| /* Reset controller. */ |
| writeb(CPUCTRL_SW_RST | CPUCTRL_UPCLK | CPUCTRL_WUEN, |
| &pdev->usb_regs->cpuctrl); |
| usleep_range(5, 10); |
| |
| usb_initialize_gadget(pdev->dev, &pdev->gadget, NULL); |
| |
| device_property_read_u16(pdev->dev, "cdns,on-chip-tx-buff-size", |
| &pdev->onchip_tx_buf); |
| device_property_read_u16(pdev->dev, "cdns,on-chip-rx-buff-size", |
| &pdev->onchip_rx_buf); |
| device_property_read_u32(pdev->dev, "cdns,avail-endpoints", |
| &pdev->eps_supported); |
| |
| /* |
| * Driver assumes that each USBHS controller has at least |
| * one IN and one OUT non control endpoint. |
| */ |
| if (!pdev->onchip_tx_buf && !pdev->onchip_rx_buf) { |
| ret = -EINVAL; |
| dev_err(pdev->dev, "Invalid on-chip memory configuration\n"); |
| goto put_gadget; |
| } |
| |
| if (!(pdev->eps_supported & ~0x00010001)) { |
| ret = -EINVAL; |
| dev_err(pdev->dev, "No hardware endpoints available\n"); |
| goto put_gadget; |
| } |
| |
| max_speed = usb_get_maximum_speed(pdev->dev); |
| |
| switch (max_speed) { |
| case USB_SPEED_FULL: |
| case USB_SPEED_HIGH: |
| break; |
| default: |
| dev_err(pdev->dev, "invalid maximum_speed parameter %d\n", |
| max_speed); |
| fallthrough; |
| case USB_SPEED_UNKNOWN: |
| max_speed = USB_SPEED_HIGH; |
| break; |
| } |
| |
| pdev->gadget.max_speed = max_speed; |
| pdev->gadget.speed = USB_SPEED_UNKNOWN; |
| pdev->gadget.ops = &cdns2_gadget_ops; |
| pdev->gadget.name = "usbhs-gadget"; |
| pdev->gadget.quirk_avoids_skb_reserve = 1; |
| pdev->gadget.irq = pdev->irq; |
| |
| spin_lock_init(&pdev->lock); |
| INIT_WORK(&pdev->pending_status_wq, cdns2_pending_setup_status_handler); |
| |
| /* Initialize endpoint container. */ |
| INIT_LIST_HEAD(&pdev->gadget.ep_list); |
| pdev->eps_dma_pool = dma_pool_create("cdns2_eps_dma_pool", pdev->dev, |
| TR_SEG_SIZE, 8, 0); |
| if (!pdev->eps_dma_pool) { |
| dev_err(pdev->dev, "Failed to create TRB dma pool\n"); |
| ret = -ENOMEM; |
| goto put_gadget; |
| } |
| |
| ret = cdns2_init_eps(pdev); |
| if (ret) { |
| dev_err(pdev->dev, "Failed to create endpoints\n"); |
| goto destroy_dma_pool; |
| } |
| |
| pdev->gadget.sg_supported = 1; |
| |
| pdev->zlp_buf = kzalloc(CDNS2_EP_ZLP_BUF_SIZE, GFP_KERNEL); |
| if (!pdev->zlp_buf) { |
| ret = -ENOMEM; |
| goto destroy_dma_pool; |
| } |
| |
| /* Allocate memory for setup packet buffer. */ |
| buf = dma_alloc_coherent(pdev->dev, 8, &pdev->ep0_preq.request.dma, |
| GFP_DMA); |
| pdev->ep0_preq.request.buf = buf; |
| |
| if (!pdev->ep0_preq.request.buf) { |
| ret = -ENOMEM; |
| goto free_zlp_buf; |
| } |
| |
| /* Add USB gadget device. */ |
| ret = usb_add_gadget(&pdev->gadget); |
| if (ret < 0) { |
| dev_err(pdev->dev, "Failed to add gadget\n"); |
| goto free_ep0_buf; |
| } |
| |
| return 0; |
| |
| free_ep0_buf: |
| dma_free_coherent(pdev->dev, 8, pdev->ep0_preq.request.buf, |
| pdev->ep0_preq.request.dma); |
| free_zlp_buf: |
| kfree(pdev->zlp_buf); |
| destroy_dma_pool: |
| dma_pool_destroy(pdev->eps_dma_pool); |
| put_gadget: |
| usb_put_gadget(&pdev->gadget); |
| |
| return ret; |
| } |
| |
| int cdns2_gadget_suspend(struct cdns2_device *pdev) |
| { |
| unsigned long flags; |
| |
| cdns2_disconnect_gadget(pdev); |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| pdev->gadget.speed = USB_SPEED_UNKNOWN; |
| |
| trace_cdns2_device_state("notattached"); |
| usb_gadget_set_state(&pdev->gadget, USB_STATE_NOTATTACHED); |
| cdns2_enable_l1(pdev, 0); |
| |
| /* Disable interrupt for device. */ |
| writeb(0, &pdev->interrupt_regs->usbien); |
| writel(0, &pdev->adma_regs->ep_ien); |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| int cdns2_gadget_resume(struct cdns2_device *pdev, bool hibernated) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| if (!pdev->gadget_driver) { |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| return 0; |
| } |
| |
| cdns2_gadget_config(pdev); |
| |
| if (hibernated) |
| clear_reg_bit_8(&pdev->usb_regs->usbcs, USBCS_DISCON); |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| |
| return 0; |
| } |
| |
| void cdns2_gadget_remove(struct cdns2_device *pdev) |
| { |
| pm_runtime_mark_last_busy(pdev->dev); |
| pm_runtime_put_autosuspend(pdev->dev); |
| |
| usb_del_gadget(&pdev->gadget); |
| cdns2_free_all_eps(pdev); |
| |
| dma_pool_destroy(pdev->eps_dma_pool); |
| kfree(pdev->zlp_buf); |
| usb_put_gadget(&pdev->gadget); |
| } |
| |
| int cdns2_gadget_init(struct cdns2_device *pdev) |
| { |
| int ret; |
| |
| /* Ensure 32-bit DMA Mask. */ |
| ret = dma_set_mask_and_coherent(pdev->dev, DMA_BIT_MASK(32)); |
| if (ret) { |
| dev_err(pdev->dev, "Failed to set dma mask: %d\n", ret); |
| return ret; |
| } |
| |
| pm_runtime_get_sync(pdev->dev); |
| |
| cdsn2_isoc_burst_opt(pdev); |
| |
| ret = cdns2_gadget_start(pdev); |
| if (ret) { |
| pm_runtime_put_sync(pdev->dev); |
| return ret; |
| } |
| |
| /* |
| * Because interrupt line can be shared with other components in |
| * driver it can't use IRQF_ONESHOT flag here. |
| */ |
| ret = devm_request_threaded_irq(pdev->dev, pdev->irq, |
| cdns2_usb_irq_handler, |
| cdns2_thread_irq_handler, |
| IRQF_SHARED, |
| dev_name(pdev->dev), |
| pdev); |
| if (ret) |
| goto err0; |
| |
| return 0; |
| |
| err0: |
| cdns2_gadget_remove(pdev); |
| |
| return ret; |
| } |