| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Cadence USBHS-DEV controller - PCI Glue driver. |
| * |
| * Copyright (C) 2023 Cadence. |
| * |
| * Author: Pawel Laszczak <pawell@cadence.com> |
| * |
| */ |
| |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| |
| #include "cdns2-gadget.h" |
| |
| #define PCI_DRIVER_NAME "cdns-pci-usbhs" |
| #define PCI_DEVICE_ID_CDNS_USB2 0x0120 |
| #define PCI_BAR_DEV 0 |
| #define PCI_DEV_FN_DEVICE 0 |
| |
| static int cdns2_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| resource_size_t rsrc_start, rsrc_len; |
| struct device *dev = &pdev->dev; |
| struct cdns2_device *priv_dev; |
| struct resource *res; |
| int ret; |
| |
| /* For GADGET PCI (devfn) function number is 0. */ |
| if (!id || pdev->devfn != PCI_DEV_FN_DEVICE || |
| pdev->class != PCI_CLASS_SERIAL_USB_DEVICE) |
| return -EINVAL; |
| |
| ret = pcim_enable_device(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", ret); |
| return ret; |
| } |
| |
| pci_set_master(pdev); |
| |
| priv_dev = devm_kzalloc(&pdev->dev, sizeof(*priv_dev), GFP_KERNEL); |
| if (!priv_dev) |
| return -ENOMEM; |
| |
| dev_dbg(dev, "Initialize resources\n"); |
| rsrc_start = pci_resource_start(pdev, PCI_BAR_DEV); |
| rsrc_len = pci_resource_len(pdev, PCI_BAR_DEV); |
| |
| res = devm_request_mem_region(dev, rsrc_start, rsrc_len, "dev"); |
| if (!res) { |
| dev_dbg(dev, "controller already in use\n"); |
| return -EBUSY; |
| } |
| |
| priv_dev->regs = devm_ioremap(dev, rsrc_start, rsrc_len); |
| if (!priv_dev->regs) { |
| dev_dbg(dev, "error mapping memory\n"); |
| return -EFAULT; |
| } |
| |
| priv_dev->irq = pdev->irq; |
| dev_dbg(dev, "USBSS-DEV physical base addr: %pa\n", |
| &rsrc_start); |
| |
| priv_dev->dev = dev; |
| |
| priv_dev->eps_supported = 0x000f000f; |
| priv_dev->onchip_tx_buf = 16; |
| priv_dev->onchip_rx_buf = 16; |
| |
| ret = cdns2_gadget_init(priv_dev); |
| if (ret) |
| return ret; |
| |
| pci_set_drvdata(pdev, priv_dev); |
| |
| device_wakeup_enable(&pdev->dev); |
| if (pci_dev_run_wake(pdev)) |
| pm_runtime_put_noidle(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static void cdns2_pci_remove(struct pci_dev *pdev) |
| { |
| struct cdns2_device *priv_dev = pci_get_drvdata(pdev); |
| |
| if (pci_dev_run_wake(pdev)) |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| cdns2_gadget_remove(priv_dev); |
| } |
| |
| static int cdns2_pci_suspend(struct device *dev) |
| { |
| struct cdns2_device *priv_dev = dev_get_drvdata(dev); |
| |
| return cdns2_gadget_suspend(priv_dev); |
| } |
| |
| static int cdns2_pci_resume(struct device *dev) |
| { |
| struct cdns2_device *priv_dev = dev_get_drvdata(dev); |
| |
| return cdns2_gadget_resume(priv_dev, 1); |
| } |
| |
| static const struct dev_pm_ops cdns2_pci_pm_ops = { |
| SYSTEM_SLEEP_PM_OPS(cdns2_pci_suspend, cdns2_pci_resume) |
| }; |
| |
| static const struct pci_device_id cdns2_pci_ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USB2), |
| .class = PCI_CLASS_SERIAL_USB_DEVICE }, |
| { 0, } |
| }; |
| |
| static struct pci_driver cdns2_pci_driver = { |
| .name = "cdns2-pci", |
| .id_table = cdns2_pci_ids, |
| .probe = cdns2_pci_probe, |
| .remove = cdns2_pci_remove, |
| .driver = { |
| .pm = pm_ptr(&cdns2_pci_pm_ops), |
| } |
| }; |
| |
| module_pci_driver(cdns2_pci_driver); |
| MODULE_DEVICE_TABLE(pci, cdns2_pci_ids); |
| |
| MODULE_ALIAS("pci:cdns2"); |
| MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Cadence CDNS2 PCI driver"); |