| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * TFP410 DPI-to-DVI encoder driver |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <video/omapfb_dss.h> |
| |
| struct panel_drv_data { |
| struct omap_dss_device dssdev; |
| struct omap_dss_device *in; |
| |
| struct gpio_desc *pd_gpio; |
| |
| int data_lines; |
| |
| struct omap_video_timings timings; |
| }; |
| |
| #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev) |
| |
| static int tfp410_connect(struct omap_dss_device *dssdev, |
| struct omap_dss_device *dst) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (omapdss_device_is_connected(dssdev)) |
| return -EBUSY; |
| |
| r = in->ops.dpi->connect(in, dssdev); |
| if (r) |
| return r; |
| |
| dst->src = dssdev; |
| dssdev->dst = dst; |
| |
| return 0; |
| } |
| |
| static void tfp410_disconnect(struct omap_dss_device *dssdev, |
| struct omap_dss_device *dst) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| WARN_ON(!omapdss_device_is_connected(dssdev)); |
| if (!omapdss_device_is_connected(dssdev)) |
| return; |
| |
| WARN_ON(dst != dssdev->dst); |
| if (dst != dssdev->dst) |
| return; |
| |
| dst->src = NULL; |
| dssdev->dst = NULL; |
| |
| in->ops.dpi->disconnect(in, &ddata->dssdev); |
| } |
| |
| static int tfp410_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return -ENODEV; |
| |
| if (omapdss_device_is_enabled(dssdev)) |
| return 0; |
| |
| in->ops.dpi->set_timings(in, &ddata->timings); |
| if (ddata->data_lines) |
| in->ops.dpi->set_data_lines(in, ddata->data_lines); |
| |
| r = in->ops.dpi->enable(in); |
| if (r) |
| return r; |
| |
| if (ddata->pd_gpio) |
| gpiod_set_value_cansleep(ddata->pd_gpio, 0); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| return 0; |
| } |
| |
| static void tfp410_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_enabled(dssdev)) |
| return; |
| |
| if (ddata->pd_gpio) |
| gpiod_set_value_cansleep(ddata->pd_gpio, 1); |
| |
| in->ops.dpi->disable(in); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| } |
| |
| static void tfp410_fix_timings(struct omap_video_timings *timings) |
| { |
| timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; |
| timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; |
| timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; |
| } |
| |
| static void tfp410_set_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| tfp410_fix_timings(timings); |
| |
| ddata->timings = *timings; |
| dssdev->panel.timings = *timings; |
| |
| in->ops.dpi->set_timings(in, timings); |
| } |
| |
| static void tfp410_get_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| |
| *timings = ddata->timings; |
| } |
| |
| static int tfp410_check_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| tfp410_fix_timings(timings); |
| |
| return in->ops.dpi->check_timings(in, timings); |
| } |
| |
| static const struct omapdss_dvi_ops tfp410_dvi_ops = { |
| .connect = tfp410_connect, |
| .disconnect = tfp410_disconnect, |
| |
| .enable = tfp410_enable, |
| .disable = tfp410_disable, |
| |
| .check_timings = tfp410_check_timings, |
| .set_timings = tfp410_set_timings, |
| .get_timings = tfp410_get_timings, |
| }; |
| |
| static int tfp410_probe(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata; |
| struct omap_dss_device *dssdev; |
| int r; |
| |
| if (!pdev->dev.of_node) |
| return -ENODEV; |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ddata); |
| |
| ddata->pd_gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown", |
| GPIOD_OUT_HIGH); |
| r = PTR_ERR_OR_ZERO(ddata->pd_gpio); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to request PD GPIO: %d\n", r); |
| return r; |
| } |
| |
| gpiod_set_consumer_name(ddata->pd_gpio, "tfp410 PD"); |
| |
| ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node); |
| r = PTR_ERR_OR_ZERO(ddata->in); |
| if (r) { |
| dev_err(&pdev->dev, "failed to find video source: %d\n", r); |
| return r; |
| } |
| |
| dssdev = &ddata->dssdev; |
| dssdev->ops.dvi = &tfp410_dvi_ops; |
| dssdev->dev = &pdev->dev; |
| dssdev->type = OMAP_DISPLAY_TYPE_DPI; |
| dssdev->output_type = OMAP_DISPLAY_TYPE_DVI; |
| dssdev->owner = THIS_MODULE; |
| dssdev->phy.dpi.data_lines = ddata->data_lines; |
| dssdev->port_num = 1; |
| |
| r = omapdss_register_output(dssdev); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to register output\n"); |
| goto err_reg; |
| } |
| |
| return 0; |
| err_reg: |
| omap_dss_put_device(ddata->in); |
| return r; |
| } |
| |
| static void tfp410_remove(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| struct omap_dss_device *in = ddata->in; |
| |
| omapdss_unregister_output(&ddata->dssdev); |
| |
| WARN_ON(omapdss_device_is_enabled(dssdev)); |
| if (omapdss_device_is_enabled(dssdev)) |
| tfp410_disable(dssdev); |
| |
| WARN_ON(omapdss_device_is_connected(dssdev)); |
| if (omapdss_device_is_connected(dssdev)) |
| tfp410_disconnect(dssdev, dssdev->dst); |
| |
| omap_dss_put_device(in); |
| } |
| |
| static const struct of_device_id tfp410_of_match[] = { |
| { .compatible = "omapdss,ti,tfp410", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, tfp410_of_match); |
| |
| static struct platform_driver tfp410_driver = { |
| .probe = tfp410_probe, |
| .remove_new = tfp410_remove, |
| .driver = { |
| .name = "tfp410", |
| .of_match_table = tfp410_of_match, |
| }, |
| }; |
| |
| module_platform_driver(tfp410_driver); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver"); |
| MODULE_LICENSE("GPL"); |