| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DSA topology and switch handling |
| * |
| * Copyright (c) 2008-2009 Marvell Semiconductor |
| * Copyright (c) 2013 Florian Fainelli <florian@openwrt.org> |
| * Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/slab.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/of.h> |
| #include <linux/of_net.h> |
| #include <net/dsa_stubs.h> |
| #include <net/sch_generic.h> |
| |
| #include "conduit.h" |
| #include "devlink.h" |
| #include "dsa.h" |
| #include "netlink.h" |
| #include "port.h" |
| #include "switch.h" |
| #include "tag.h" |
| #include "user.h" |
| |
| #define DSA_MAX_NUM_OFFLOADING_BRIDGES BITS_PER_LONG |
| |
| static DEFINE_MUTEX(dsa2_mutex); |
| LIST_HEAD(dsa_tree_list); |
| |
| static struct workqueue_struct *dsa_owq; |
| |
| /* Track the bridges with forwarding offload enabled */ |
| static unsigned long dsa_fwd_offloading_bridges; |
| |
| bool dsa_schedule_work(struct work_struct *work) |
| { |
| return queue_work(dsa_owq, work); |
| } |
| |
| void dsa_flush_workqueue(void) |
| { |
| flush_workqueue(dsa_owq); |
| } |
| EXPORT_SYMBOL_GPL(dsa_flush_workqueue); |
| |
| /** |
| * dsa_lag_map() - Map LAG structure to a linear LAG array |
| * @dst: Tree in which to record the mapping. |
| * @lag: LAG structure that is to be mapped to the tree's array. |
| * |
| * dsa_lag_id/dsa_lag_by_id can then be used to translate between the |
| * two spaces. The size of the mapping space is determined by the |
| * driver by setting ds->num_lag_ids. It is perfectly legal to leave |
| * it unset if it is not needed, in which case these functions become |
| * no-ops. |
| */ |
| void dsa_lag_map(struct dsa_switch_tree *dst, struct dsa_lag *lag) |
| { |
| unsigned int id; |
| |
| for (id = 1; id <= dst->lags_len; id++) { |
| if (!dsa_lag_by_id(dst, id)) { |
| dst->lags[id - 1] = lag; |
| lag->id = id; |
| return; |
| } |
| } |
| |
| /* No IDs left, which is OK. Some drivers do not need it. The |
| * ones that do, e.g. mv88e6xxx, will discover that dsa_lag_id |
| * returns an error for this device when joining the LAG. The |
| * driver can then return -EOPNOTSUPP back to DSA, which will |
| * fall back to a software LAG. |
| */ |
| } |
| |
| /** |
| * dsa_lag_unmap() - Remove a LAG ID mapping |
| * @dst: Tree in which the mapping is recorded. |
| * @lag: LAG structure that was mapped. |
| * |
| * As there may be multiple users of the mapping, it is only removed |
| * if there are no other references to it. |
| */ |
| void dsa_lag_unmap(struct dsa_switch_tree *dst, struct dsa_lag *lag) |
| { |
| unsigned int id; |
| |
| dsa_lags_foreach_id(id, dst) { |
| if (dsa_lag_by_id(dst, id) == lag) { |
| dst->lags[id - 1] = NULL; |
| lag->id = 0; |
| break; |
| } |
| } |
| } |
| |
| struct dsa_lag *dsa_tree_lag_find(struct dsa_switch_tree *dst, |
| const struct net_device *lag_dev) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_lag_dev_get(dp) == lag_dev) |
| return dp->lag; |
| |
| return NULL; |
| } |
| |
| struct dsa_bridge *dsa_tree_bridge_find(struct dsa_switch_tree *dst, |
| const struct net_device *br) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_bridge_dev_get(dp) == br) |
| return dp->bridge; |
| |
| return NULL; |
| } |
| |
| static int dsa_bridge_num_find(const struct net_device *bridge_dev) |
| { |
| struct dsa_switch_tree *dst; |
| |
| list_for_each_entry(dst, &dsa_tree_list, list) { |
| struct dsa_bridge *bridge; |
| |
| bridge = dsa_tree_bridge_find(dst, bridge_dev); |
| if (bridge) |
| return bridge->num; |
| } |
| |
| return 0; |
| } |
| |
| unsigned int dsa_bridge_num_get(const struct net_device *bridge_dev, int max) |
| { |
| unsigned int bridge_num = dsa_bridge_num_find(bridge_dev); |
| |
| /* Switches without FDB isolation support don't get unique |
| * bridge numbering |
| */ |
| if (!max) |
| return 0; |
| |
| if (!bridge_num) { |
| /* First port that requests FDB isolation or TX forwarding |
| * offload for this bridge |
| */ |
| bridge_num = find_next_zero_bit(&dsa_fwd_offloading_bridges, |
| DSA_MAX_NUM_OFFLOADING_BRIDGES, |
| 1); |
| if (bridge_num >= max) |
| return 0; |
| |
| set_bit(bridge_num, &dsa_fwd_offloading_bridges); |
| } |
| |
| return bridge_num; |
| } |
| |
| void dsa_bridge_num_put(const struct net_device *bridge_dev, |
| unsigned int bridge_num) |
| { |
| /* Since we refcount bridges, we know that when we call this function |
| * it is no longer in use, so we can just go ahead and remove it from |
| * the bit mask. |
| */ |
| clear_bit(bridge_num, &dsa_fwd_offloading_bridges); |
| } |
| |
| struct dsa_switch *dsa_switch_find(int tree_index, int sw_index) |
| { |
| struct dsa_switch_tree *dst; |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dst, &dsa_tree_list, list) { |
| if (dst->index != tree_index) |
| continue; |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| if (dp->ds->index != sw_index) |
| continue; |
| |
| return dp->ds; |
| } |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(dsa_switch_find); |
| |
| static struct dsa_switch_tree *dsa_tree_find(int index) |
| { |
| struct dsa_switch_tree *dst; |
| |
| list_for_each_entry(dst, &dsa_tree_list, list) |
| if (dst->index == index) |
| return dst; |
| |
| return NULL; |
| } |
| |
| static struct dsa_switch_tree *dsa_tree_alloc(int index) |
| { |
| struct dsa_switch_tree *dst; |
| |
| dst = kzalloc(sizeof(*dst), GFP_KERNEL); |
| if (!dst) |
| return NULL; |
| |
| dst->index = index; |
| |
| INIT_LIST_HEAD(&dst->rtable); |
| |
| INIT_LIST_HEAD(&dst->ports); |
| |
| INIT_LIST_HEAD(&dst->list); |
| list_add_tail(&dst->list, &dsa_tree_list); |
| |
| kref_init(&dst->refcount); |
| |
| return dst; |
| } |
| |
| static void dsa_tree_free(struct dsa_switch_tree *dst) |
| { |
| if (dst->tag_ops) |
| dsa_tag_driver_put(dst->tag_ops); |
| list_del(&dst->list); |
| kfree(dst); |
| } |
| |
| static struct dsa_switch_tree *dsa_tree_get(struct dsa_switch_tree *dst) |
| { |
| if (dst) |
| kref_get(&dst->refcount); |
| |
| return dst; |
| } |
| |
| static struct dsa_switch_tree *dsa_tree_touch(int index) |
| { |
| struct dsa_switch_tree *dst; |
| |
| dst = dsa_tree_find(index); |
| if (dst) |
| return dsa_tree_get(dst); |
| else |
| return dsa_tree_alloc(index); |
| } |
| |
| static void dsa_tree_release(struct kref *ref) |
| { |
| struct dsa_switch_tree *dst; |
| |
| dst = container_of(ref, struct dsa_switch_tree, refcount); |
| |
| dsa_tree_free(dst); |
| } |
| |
| static void dsa_tree_put(struct dsa_switch_tree *dst) |
| { |
| if (dst) |
| kref_put(&dst->refcount, dsa_tree_release); |
| } |
| |
| static struct dsa_port *dsa_tree_find_port_by_node(struct dsa_switch_tree *dst, |
| struct device_node *dn) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dp->dn == dn) |
| return dp; |
| |
| return NULL; |
| } |
| |
| static struct dsa_link *dsa_link_touch(struct dsa_port *dp, |
| struct dsa_port *link_dp) |
| { |
| struct dsa_switch *ds = dp->ds; |
| struct dsa_switch_tree *dst; |
| struct dsa_link *dl; |
| |
| dst = ds->dst; |
| |
| list_for_each_entry(dl, &dst->rtable, list) |
| if (dl->dp == dp && dl->link_dp == link_dp) |
| return dl; |
| |
| dl = kzalloc(sizeof(*dl), GFP_KERNEL); |
| if (!dl) |
| return NULL; |
| |
| dl->dp = dp; |
| dl->link_dp = link_dp; |
| |
| INIT_LIST_HEAD(&dl->list); |
| list_add_tail(&dl->list, &dst->rtable); |
| |
| return dl; |
| } |
| |
| static bool dsa_port_setup_routing_table(struct dsa_port *dp) |
| { |
| struct dsa_switch *ds = dp->ds; |
| struct dsa_switch_tree *dst = ds->dst; |
| struct device_node *dn = dp->dn; |
| struct of_phandle_iterator it; |
| struct dsa_port *link_dp; |
| struct dsa_link *dl; |
| int err; |
| |
| of_for_each_phandle(&it, err, dn, "link", NULL, 0) { |
| link_dp = dsa_tree_find_port_by_node(dst, it.node); |
| if (!link_dp) { |
| of_node_put(it.node); |
| return false; |
| } |
| |
| dl = dsa_link_touch(dp, link_dp); |
| if (!dl) { |
| of_node_put(it.node); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool dsa_tree_setup_routing_table(struct dsa_switch_tree *dst) |
| { |
| bool complete = true; |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| if (dsa_port_is_dsa(dp)) { |
| complete = dsa_port_setup_routing_table(dp); |
| if (!complete) |
| break; |
| } |
| } |
| |
| return complete; |
| } |
| |
| static struct dsa_port *dsa_tree_find_first_cpu(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_is_cpu(dp)) |
| return dp; |
| |
| return NULL; |
| } |
| |
| struct net_device *dsa_tree_find_first_conduit(struct dsa_switch_tree *dst) |
| { |
| struct device_node *ethernet; |
| struct net_device *conduit; |
| struct dsa_port *cpu_dp; |
| |
| cpu_dp = dsa_tree_find_first_cpu(dst); |
| ethernet = of_parse_phandle(cpu_dp->dn, "ethernet", 0); |
| conduit = of_find_net_device_by_node(ethernet); |
| of_node_put(ethernet); |
| |
| return conduit; |
| } |
| |
| /* Assign the default CPU port (the first one in the tree) to all ports of the |
| * fabric which don't already have one as part of their own switch. |
| */ |
| static int dsa_tree_setup_default_cpu(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *cpu_dp, *dp; |
| |
| cpu_dp = dsa_tree_find_first_cpu(dst); |
| if (!cpu_dp) { |
| pr_err("DSA: tree %d has no CPU port\n", dst->index); |
| return -EINVAL; |
| } |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| if (dp->cpu_dp) |
| continue; |
| |
| if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp)) |
| dp->cpu_dp = cpu_dp; |
| } |
| |
| return 0; |
| } |
| |
| static struct dsa_port * |
| dsa_switch_preferred_default_local_cpu_port(struct dsa_switch *ds) |
| { |
| struct dsa_port *cpu_dp; |
| |
| if (!ds->ops->preferred_default_local_cpu_port) |
| return NULL; |
| |
| cpu_dp = ds->ops->preferred_default_local_cpu_port(ds); |
| if (!cpu_dp) |
| return NULL; |
| |
| if (WARN_ON(!dsa_port_is_cpu(cpu_dp) || cpu_dp->ds != ds)) |
| return NULL; |
| |
| return cpu_dp; |
| } |
| |
| /* Perform initial assignment of CPU ports to user ports and DSA links in the |
| * fabric, giving preference to CPU ports local to each switch. Default to |
| * using the first CPU port in the switch tree if the port does not have a CPU |
| * port local to this switch. |
| */ |
| static int dsa_tree_setup_cpu_ports(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *preferred_cpu_dp, *cpu_dp, *dp; |
| |
| list_for_each_entry(cpu_dp, &dst->ports, list) { |
| if (!dsa_port_is_cpu(cpu_dp)) |
| continue; |
| |
| preferred_cpu_dp = dsa_switch_preferred_default_local_cpu_port(cpu_dp->ds); |
| if (preferred_cpu_dp && preferred_cpu_dp != cpu_dp) |
| continue; |
| |
| /* Prefer a local CPU port */ |
| dsa_switch_for_each_port(dp, cpu_dp->ds) { |
| /* Prefer the first local CPU port found */ |
| if (dp->cpu_dp) |
| continue; |
| |
| if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp)) |
| dp->cpu_dp = cpu_dp; |
| } |
| } |
| |
| return dsa_tree_setup_default_cpu(dst); |
| } |
| |
| static void dsa_tree_teardown_cpu_ports(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp)) |
| dp->cpu_dp = NULL; |
| } |
| |
| static int dsa_port_setup(struct dsa_port *dp) |
| { |
| bool dsa_port_link_registered = false; |
| struct dsa_switch *ds = dp->ds; |
| bool dsa_port_enabled = false; |
| int err = 0; |
| |
| if (dp->setup) |
| return 0; |
| |
| err = dsa_port_devlink_setup(dp); |
| if (err) |
| return err; |
| |
| switch (dp->type) { |
| case DSA_PORT_TYPE_UNUSED: |
| dsa_port_disable(dp); |
| break; |
| case DSA_PORT_TYPE_CPU: |
| if (dp->dn) { |
| err = dsa_shared_port_link_register_of(dp); |
| if (err) |
| break; |
| dsa_port_link_registered = true; |
| } else { |
| dev_warn(ds->dev, |
| "skipping link registration for CPU port %d\n", |
| dp->index); |
| } |
| |
| err = dsa_port_enable(dp, NULL); |
| if (err) |
| break; |
| dsa_port_enabled = true; |
| |
| break; |
| case DSA_PORT_TYPE_DSA: |
| if (dp->dn) { |
| err = dsa_shared_port_link_register_of(dp); |
| if (err) |
| break; |
| dsa_port_link_registered = true; |
| } else { |
| dev_warn(ds->dev, |
| "skipping link registration for DSA port %d\n", |
| dp->index); |
| } |
| |
| err = dsa_port_enable(dp, NULL); |
| if (err) |
| break; |
| dsa_port_enabled = true; |
| |
| break; |
| case DSA_PORT_TYPE_USER: |
| of_get_mac_address(dp->dn, dp->mac); |
| err = dsa_user_create(dp); |
| break; |
| } |
| |
| if (err && dsa_port_enabled) |
| dsa_port_disable(dp); |
| if (err && dsa_port_link_registered) |
| dsa_shared_port_link_unregister_of(dp); |
| if (err) { |
| dsa_port_devlink_teardown(dp); |
| return err; |
| } |
| |
| dp->setup = true; |
| |
| return 0; |
| } |
| |
| static void dsa_port_teardown(struct dsa_port *dp) |
| { |
| if (!dp->setup) |
| return; |
| |
| switch (dp->type) { |
| case DSA_PORT_TYPE_UNUSED: |
| break; |
| case DSA_PORT_TYPE_CPU: |
| dsa_port_disable(dp); |
| if (dp->dn) |
| dsa_shared_port_link_unregister_of(dp); |
| break; |
| case DSA_PORT_TYPE_DSA: |
| dsa_port_disable(dp); |
| if (dp->dn) |
| dsa_shared_port_link_unregister_of(dp); |
| break; |
| case DSA_PORT_TYPE_USER: |
| if (dp->user) { |
| dsa_user_destroy(dp->user); |
| dp->user = NULL; |
| } |
| break; |
| } |
| |
| dsa_port_devlink_teardown(dp); |
| |
| dp->setup = false; |
| } |
| |
| static int dsa_port_setup_as_unused(struct dsa_port *dp) |
| { |
| dp->type = DSA_PORT_TYPE_UNUSED; |
| return dsa_port_setup(dp); |
| } |
| |
| static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds) |
| { |
| const struct dsa_device_ops *tag_ops = ds->dst->tag_ops; |
| struct dsa_switch_tree *dst = ds->dst; |
| int err; |
| |
| if (tag_ops->proto == dst->default_proto) |
| goto connect; |
| |
| rtnl_lock(); |
| err = ds->ops->change_tag_protocol(ds, tag_ops->proto); |
| rtnl_unlock(); |
| if (err) { |
| dev_err(ds->dev, "Unable to use tag protocol \"%s\": %pe\n", |
| tag_ops->name, ERR_PTR(err)); |
| return err; |
| } |
| |
| connect: |
| if (tag_ops->connect) { |
| err = tag_ops->connect(ds); |
| if (err) |
| return err; |
| } |
| |
| if (ds->ops->connect_tag_protocol) { |
| err = ds->ops->connect_tag_protocol(ds, tag_ops->proto); |
| if (err) { |
| dev_err(ds->dev, |
| "Unable to connect to tag protocol \"%s\": %pe\n", |
| tag_ops->name, ERR_PTR(err)); |
| goto disconnect; |
| } |
| } |
| |
| return 0; |
| |
| disconnect: |
| if (tag_ops->disconnect) |
| tag_ops->disconnect(ds); |
| |
| return err; |
| } |
| |
| static void dsa_switch_teardown_tag_protocol(struct dsa_switch *ds) |
| { |
| const struct dsa_device_ops *tag_ops = ds->dst->tag_ops; |
| |
| if (tag_ops->disconnect) |
| tag_ops->disconnect(ds); |
| } |
| |
| static int dsa_switch_setup(struct dsa_switch *ds) |
| { |
| int err; |
| |
| if (ds->setup) |
| return 0; |
| |
| /* Initialize ds->phys_mii_mask before registering the user MDIO bus |
| * driver and before ops->setup() has run, since the switch drivers and |
| * the user MDIO bus driver rely on these values for probing PHY |
| * devices or not |
| */ |
| ds->phys_mii_mask |= dsa_user_ports(ds); |
| |
| err = dsa_switch_devlink_alloc(ds); |
| if (err) |
| return err; |
| |
| err = dsa_switch_register_notifier(ds); |
| if (err) |
| goto devlink_free; |
| |
| ds->configure_vlan_while_not_filtering = true; |
| |
| err = ds->ops->setup(ds); |
| if (err < 0) |
| goto unregister_notifier; |
| |
| err = dsa_switch_setup_tag_protocol(ds); |
| if (err) |
| goto teardown; |
| |
| if (!ds->user_mii_bus && ds->ops->phy_read) { |
| ds->user_mii_bus = mdiobus_alloc(); |
| if (!ds->user_mii_bus) { |
| err = -ENOMEM; |
| goto teardown; |
| } |
| |
| dsa_user_mii_bus_init(ds); |
| |
| err = mdiobus_register(ds->user_mii_bus); |
| if (err < 0) |
| goto free_user_mii_bus; |
| } |
| |
| dsa_switch_devlink_register(ds); |
| |
| ds->setup = true; |
| return 0; |
| |
| free_user_mii_bus: |
| if (ds->user_mii_bus && ds->ops->phy_read) |
| mdiobus_free(ds->user_mii_bus); |
| teardown: |
| if (ds->ops->teardown) |
| ds->ops->teardown(ds); |
| unregister_notifier: |
| dsa_switch_unregister_notifier(ds); |
| devlink_free: |
| dsa_switch_devlink_free(ds); |
| return err; |
| } |
| |
| static void dsa_switch_teardown(struct dsa_switch *ds) |
| { |
| if (!ds->setup) |
| return; |
| |
| dsa_switch_devlink_unregister(ds); |
| |
| if (ds->user_mii_bus && ds->ops->phy_read) { |
| mdiobus_unregister(ds->user_mii_bus); |
| mdiobus_free(ds->user_mii_bus); |
| ds->user_mii_bus = NULL; |
| } |
| |
| dsa_switch_teardown_tag_protocol(ds); |
| |
| if (ds->ops->teardown) |
| ds->ops->teardown(ds); |
| |
| dsa_switch_unregister_notifier(ds); |
| |
| dsa_switch_devlink_free(ds); |
| |
| ds->setup = false; |
| } |
| |
| /* First tear down the non-shared, then the shared ports. This ensures that |
| * all work items scheduled by our switchdev handlers for user ports have |
| * completed before we destroy the refcounting kept on the shared ports. |
| */ |
| static void dsa_tree_teardown_ports(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_is_user(dp) || dsa_port_is_unused(dp)) |
| dsa_port_teardown(dp); |
| |
| dsa_flush_workqueue(); |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp)) |
| dsa_port_teardown(dp); |
| } |
| |
| static void dsa_tree_teardown_switches(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) |
| dsa_switch_teardown(dp->ds); |
| } |
| |
| /* Bring shared ports up first, then non-shared ports */ |
| static int dsa_tree_setup_ports(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *dp; |
| int err = 0; |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp)) { |
| err = dsa_port_setup(dp); |
| if (err) |
| goto teardown; |
| } |
| } |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| if (dsa_port_is_user(dp) || dsa_port_is_unused(dp)) { |
| err = dsa_port_setup(dp); |
| if (err) { |
| err = dsa_port_setup_as_unused(dp); |
| if (err) |
| goto teardown; |
| } |
| } |
| } |
| |
| return 0; |
| |
| teardown: |
| dsa_tree_teardown_ports(dst); |
| |
| return err; |
| } |
| |
| static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *dp; |
| int err = 0; |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| err = dsa_switch_setup(dp->ds); |
| if (err) { |
| dsa_tree_teardown_switches(dst); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| static int dsa_tree_setup_conduit(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *cpu_dp; |
| int err = 0; |
| |
| rtnl_lock(); |
| |
| dsa_tree_for_each_cpu_port(cpu_dp, dst) { |
| struct net_device *conduit = cpu_dp->conduit; |
| bool admin_up = (conduit->flags & IFF_UP) && |
| !qdisc_tx_is_noop(conduit); |
| |
| err = dsa_conduit_setup(conduit, cpu_dp); |
| if (err) |
| break; |
| |
| /* Replay conduit state event */ |
| dsa_tree_conduit_admin_state_change(dst, conduit, admin_up); |
| dsa_tree_conduit_oper_state_change(dst, conduit, |
| netif_oper_up(conduit)); |
| } |
| |
| rtnl_unlock(); |
| |
| return err; |
| } |
| |
| static void dsa_tree_teardown_conduit(struct dsa_switch_tree *dst) |
| { |
| struct dsa_port *cpu_dp; |
| |
| rtnl_lock(); |
| |
| dsa_tree_for_each_cpu_port(cpu_dp, dst) { |
| struct net_device *conduit = cpu_dp->conduit; |
| |
| /* Synthesizing an "admin down" state is sufficient for |
| * the switches to get a notification if the conduit is |
| * currently up and running. |
| */ |
| dsa_tree_conduit_admin_state_change(dst, conduit, false); |
| |
| dsa_conduit_teardown(conduit); |
| } |
| |
| rtnl_unlock(); |
| } |
| |
| static int dsa_tree_setup_lags(struct dsa_switch_tree *dst) |
| { |
| unsigned int len = 0; |
| struct dsa_port *dp; |
| |
| list_for_each_entry(dp, &dst->ports, list) { |
| if (dp->ds->num_lag_ids > len) |
| len = dp->ds->num_lag_ids; |
| } |
| |
| if (!len) |
| return 0; |
| |
| dst->lags = kcalloc(len, sizeof(*dst->lags), GFP_KERNEL); |
| if (!dst->lags) |
| return -ENOMEM; |
| |
| dst->lags_len = len; |
| return 0; |
| } |
| |
| static void dsa_tree_teardown_lags(struct dsa_switch_tree *dst) |
| { |
| kfree(dst->lags); |
| } |
| |
| static int dsa_tree_setup(struct dsa_switch_tree *dst) |
| { |
| bool complete; |
| int err; |
| |
| if (dst->setup) { |
| pr_err("DSA: tree %d already setup! Disjoint trees?\n", |
| dst->index); |
| return -EEXIST; |
| } |
| |
| complete = dsa_tree_setup_routing_table(dst); |
| if (!complete) |
| return 0; |
| |
| err = dsa_tree_setup_cpu_ports(dst); |
| if (err) |
| return err; |
| |
| err = dsa_tree_setup_switches(dst); |
| if (err) |
| goto teardown_cpu_ports; |
| |
| err = dsa_tree_setup_ports(dst); |
| if (err) |
| goto teardown_switches; |
| |
| err = dsa_tree_setup_conduit(dst); |
| if (err) |
| goto teardown_ports; |
| |
| err = dsa_tree_setup_lags(dst); |
| if (err) |
| goto teardown_conduit; |
| |
| dst->setup = true; |
| |
| pr_info("DSA: tree %d setup\n", dst->index); |
| |
| return 0; |
| |
| teardown_conduit: |
| dsa_tree_teardown_conduit(dst); |
| teardown_ports: |
| dsa_tree_teardown_ports(dst); |
| teardown_switches: |
| dsa_tree_teardown_switches(dst); |
| teardown_cpu_ports: |
| dsa_tree_teardown_cpu_ports(dst); |
| |
| return err; |
| } |
| |
| static void dsa_tree_teardown(struct dsa_switch_tree *dst) |
| { |
| struct dsa_link *dl, *next; |
| |
| if (!dst->setup) |
| return; |
| |
| dsa_tree_teardown_lags(dst); |
| |
| dsa_tree_teardown_conduit(dst); |
| |
| dsa_tree_teardown_ports(dst); |
| |
| dsa_tree_teardown_switches(dst); |
| |
| dsa_tree_teardown_cpu_ports(dst); |
| |
| list_for_each_entry_safe(dl, next, &dst->rtable, list) { |
| list_del(&dl->list); |
| kfree(dl); |
| } |
| |
| pr_info("DSA: tree %d torn down\n", dst->index); |
| |
| dst->setup = false; |
| } |
| |
| static int dsa_tree_bind_tag_proto(struct dsa_switch_tree *dst, |
| const struct dsa_device_ops *tag_ops) |
| { |
| const struct dsa_device_ops *old_tag_ops = dst->tag_ops; |
| struct dsa_notifier_tag_proto_info info; |
| int err; |
| |
| dst->tag_ops = tag_ops; |
| |
| /* Notify the switches from this tree about the connection |
| * to the new tagger |
| */ |
| info.tag_ops = tag_ops; |
| err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_CONNECT, &info); |
| if (err && err != -EOPNOTSUPP) |
| goto out_disconnect; |
| |
| /* Notify the old tagger about the disconnection from this tree */ |
| info.tag_ops = old_tag_ops; |
| dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info); |
| |
| return 0; |
| |
| out_disconnect: |
| info.tag_ops = tag_ops; |
| dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info); |
| dst->tag_ops = old_tag_ops; |
| |
| return err; |
| } |
| |
| /* Since the dsa/tagging sysfs device attribute is per conduit, the assumption |
| * is that all DSA switches within a tree share the same tagger, otherwise |
| * they would have formed disjoint trees (different "dsa,member" values). |
| */ |
| int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst, |
| const struct dsa_device_ops *tag_ops, |
| const struct dsa_device_ops *old_tag_ops) |
| { |
| struct dsa_notifier_tag_proto_info info; |
| struct dsa_port *dp; |
| int err = -EBUSY; |
| |
| if (!rtnl_trylock()) |
| return restart_syscall(); |
| |
| /* At the moment we don't allow changing the tag protocol under |
| * traffic. The rtnl_mutex also happens to serialize concurrent |
| * attempts to change the tagging protocol. If we ever lift the IFF_UP |
| * restriction, there needs to be another mutex which serializes this. |
| */ |
| dsa_tree_for_each_user_port(dp, dst) { |
| if (dsa_port_to_conduit(dp)->flags & IFF_UP) |
| goto out_unlock; |
| |
| if (dp->user->flags & IFF_UP) |
| goto out_unlock; |
| } |
| |
| /* Notify the tag protocol change */ |
| info.tag_ops = tag_ops; |
| err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info); |
| if (err) |
| goto out_unwind_tagger; |
| |
| err = dsa_tree_bind_tag_proto(dst, tag_ops); |
| if (err) |
| goto out_unwind_tagger; |
| |
| rtnl_unlock(); |
| |
| return 0; |
| |
| out_unwind_tagger: |
| info.tag_ops = old_tag_ops; |
| dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info); |
| out_unlock: |
| rtnl_unlock(); |
| return err; |
| } |
| |
| static void dsa_tree_conduit_state_change(struct dsa_switch_tree *dst, |
| struct net_device *conduit) |
| { |
| struct dsa_notifier_conduit_state_info info; |
| struct dsa_port *cpu_dp = conduit->dsa_ptr; |
| |
| info.conduit = conduit; |
| info.operational = dsa_port_conduit_is_operational(cpu_dp); |
| |
| dsa_tree_notify(dst, DSA_NOTIFIER_CONDUIT_STATE_CHANGE, &info); |
| } |
| |
| void dsa_tree_conduit_admin_state_change(struct dsa_switch_tree *dst, |
| struct net_device *conduit, |
| bool up) |
| { |
| struct dsa_port *cpu_dp = conduit->dsa_ptr; |
| bool notify = false; |
| |
| /* Don't keep track of admin state on LAG DSA conduits, |
| * but rather just of physical DSA conduits |
| */ |
| if (netif_is_lag_master(conduit)) |
| return; |
| |
| if ((dsa_port_conduit_is_operational(cpu_dp)) != |
| (up && cpu_dp->conduit_oper_up)) |
| notify = true; |
| |
| cpu_dp->conduit_admin_up = up; |
| |
| if (notify) |
| dsa_tree_conduit_state_change(dst, conduit); |
| } |
| |
| void dsa_tree_conduit_oper_state_change(struct dsa_switch_tree *dst, |
| struct net_device *conduit, |
| bool up) |
| { |
| struct dsa_port *cpu_dp = conduit->dsa_ptr; |
| bool notify = false; |
| |
| /* Don't keep track of oper state on LAG DSA conduits, |
| * but rather just of physical DSA conduits |
| */ |
| if (netif_is_lag_master(conduit)) |
| return; |
| |
| if ((dsa_port_conduit_is_operational(cpu_dp)) != |
| (cpu_dp->conduit_admin_up && up)) |
| notify = true; |
| |
| cpu_dp->conduit_oper_up = up; |
| |
| if (notify) |
| dsa_tree_conduit_state_change(dst, conduit); |
| } |
| |
| static struct dsa_port *dsa_port_touch(struct dsa_switch *ds, int index) |
| { |
| struct dsa_switch_tree *dst = ds->dst; |
| struct dsa_port *dp; |
| |
| dsa_switch_for_each_port(dp, ds) |
| if (dp->index == index) |
| return dp; |
| |
| dp = kzalloc(sizeof(*dp), GFP_KERNEL); |
| if (!dp) |
| return NULL; |
| |
| dp->ds = ds; |
| dp->index = index; |
| |
| mutex_init(&dp->addr_lists_lock); |
| mutex_init(&dp->vlans_lock); |
| INIT_LIST_HEAD(&dp->fdbs); |
| INIT_LIST_HEAD(&dp->mdbs); |
| INIT_LIST_HEAD(&dp->vlans); /* also initializes &dp->user_vlans */ |
| INIT_LIST_HEAD(&dp->list); |
| list_add_tail(&dp->list, &dst->ports); |
| |
| return dp; |
| } |
| |
| static int dsa_port_parse_user(struct dsa_port *dp, const char *name) |
| { |
| dp->type = DSA_PORT_TYPE_USER; |
| dp->name = name; |
| |
| return 0; |
| } |
| |
| static int dsa_port_parse_dsa(struct dsa_port *dp) |
| { |
| dp->type = DSA_PORT_TYPE_DSA; |
| |
| return 0; |
| } |
| |
| static enum dsa_tag_protocol dsa_get_tag_protocol(struct dsa_port *dp, |
| struct net_device *conduit) |
| { |
| enum dsa_tag_protocol tag_protocol = DSA_TAG_PROTO_NONE; |
| struct dsa_switch *mds, *ds = dp->ds; |
| unsigned int mdp_upstream; |
| struct dsa_port *mdp; |
| |
| /* It is possible to stack DSA switches onto one another when that |
| * happens the switch driver may want to know if its tagging protocol |
| * is going to work in such a configuration. |
| */ |
| if (dsa_user_dev_check(conduit)) { |
| mdp = dsa_user_to_port(conduit); |
| mds = mdp->ds; |
| mdp_upstream = dsa_upstream_port(mds, mdp->index); |
| tag_protocol = mds->ops->get_tag_protocol(mds, mdp_upstream, |
| DSA_TAG_PROTO_NONE); |
| } |
| |
| /* If the conduit device is not itself a DSA user in a disjoint DSA |
| * tree, then return immediately. |
| */ |
| return ds->ops->get_tag_protocol(ds, dp->index, tag_protocol); |
| } |
| |
| static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *conduit, |
| const char *user_protocol) |
| { |
| const struct dsa_device_ops *tag_ops = NULL; |
| struct dsa_switch *ds = dp->ds; |
| struct dsa_switch_tree *dst = ds->dst; |
| enum dsa_tag_protocol default_proto; |
| |
| /* Find out which protocol the switch would prefer. */ |
| default_proto = dsa_get_tag_protocol(dp, conduit); |
| if (dst->default_proto) { |
| if (dst->default_proto != default_proto) { |
| dev_err(ds->dev, |
| "A DSA switch tree can have only one tagging protocol\n"); |
| return -EINVAL; |
| } |
| } else { |
| dst->default_proto = default_proto; |
| } |
| |
| /* See if the user wants to override that preference. */ |
| if (user_protocol) { |
| if (!ds->ops->change_tag_protocol) { |
| dev_err(ds->dev, "Tag protocol cannot be modified\n"); |
| return -EINVAL; |
| } |
| |
| tag_ops = dsa_tag_driver_get_by_name(user_protocol); |
| if (IS_ERR(tag_ops)) { |
| dev_warn(ds->dev, |
| "Failed to find a tagging driver for protocol %s, using default\n", |
| user_protocol); |
| tag_ops = NULL; |
| } |
| } |
| |
| if (!tag_ops) |
| tag_ops = dsa_tag_driver_get_by_id(default_proto); |
| |
| if (IS_ERR(tag_ops)) { |
| if (PTR_ERR(tag_ops) == -ENOPROTOOPT) |
| return -EPROBE_DEFER; |
| |
| dev_warn(ds->dev, "No tagger for this switch\n"); |
| return PTR_ERR(tag_ops); |
| } |
| |
| if (dst->tag_ops) { |
| if (dst->tag_ops != tag_ops) { |
| dev_err(ds->dev, |
| "A DSA switch tree can have only one tagging protocol\n"); |
| |
| dsa_tag_driver_put(tag_ops); |
| return -EINVAL; |
| } |
| |
| /* In the case of multiple CPU ports per switch, the tagging |
| * protocol is still reference-counted only per switch tree. |
| */ |
| dsa_tag_driver_put(tag_ops); |
| } else { |
| dst->tag_ops = tag_ops; |
| } |
| |
| dp->conduit = conduit; |
| dp->type = DSA_PORT_TYPE_CPU; |
| dsa_port_set_tag_protocol(dp, dst->tag_ops); |
| dp->dst = dst; |
| |
| /* At this point, the tree may be configured to use a different |
| * tagger than the one chosen by the switch driver during |
| * .setup, in the case when a user selects a custom protocol |
| * through the DT. |
| * |
| * This is resolved by syncing the driver with the tree in |
| * dsa_switch_setup_tag_protocol once .setup has run and the |
| * driver is ready to accept calls to .change_tag_protocol. If |
| * the driver does not support the custom protocol at that |
| * point, the tree is wholly rejected, thereby ensuring that the |
| * tree and driver are always in agreement on the protocol to |
| * use. |
| */ |
| return 0; |
| } |
| |
| static int dsa_port_parse_of(struct dsa_port *dp, struct device_node *dn) |
| { |
| struct device_node *ethernet = of_parse_phandle(dn, "ethernet", 0); |
| const char *name = of_get_property(dn, "label", NULL); |
| bool link = of_property_read_bool(dn, "link"); |
| |
| dp->dn = dn; |
| |
| if (ethernet) { |
| struct net_device *conduit; |
| const char *user_protocol; |
| |
| conduit = of_find_net_device_by_node(ethernet); |
| of_node_put(ethernet); |
| if (!conduit) |
| return -EPROBE_DEFER; |
| |
| user_protocol = of_get_property(dn, "dsa-tag-protocol", NULL); |
| return dsa_port_parse_cpu(dp, conduit, user_protocol); |
| } |
| |
| if (link) |
| return dsa_port_parse_dsa(dp); |
| |
| return dsa_port_parse_user(dp, name); |
| } |
| |
| static int dsa_switch_parse_ports_of(struct dsa_switch *ds, |
| struct device_node *dn) |
| { |
| struct device_node *ports, *port; |
| struct dsa_port *dp; |
| int err = 0; |
| u32 reg; |
| |
| ports = of_get_child_by_name(dn, "ports"); |
| if (!ports) { |
| /* The second possibility is "ethernet-ports" */ |
| ports = of_get_child_by_name(dn, "ethernet-ports"); |
| if (!ports) { |
| dev_err(ds->dev, "no ports child node found\n"); |
| return -EINVAL; |
| } |
| } |
| |
| for_each_available_child_of_node(ports, port) { |
| err = of_property_read_u32(port, "reg", ®); |
| if (err) { |
| of_node_put(port); |
| goto out_put_node; |
| } |
| |
| if (reg >= ds->num_ports) { |
| dev_err(ds->dev, "port %pOF index %u exceeds num_ports (%u)\n", |
| port, reg, ds->num_ports); |
| of_node_put(port); |
| err = -EINVAL; |
| goto out_put_node; |
| } |
| |
| dp = dsa_to_port(ds, reg); |
| |
| err = dsa_port_parse_of(dp, port); |
| if (err) { |
| of_node_put(port); |
| goto out_put_node; |
| } |
| } |
| |
| out_put_node: |
| of_node_put(ports); |
| return err; |
| } |
| |
| static int dsa_switch_parse_member_of(struct dsa_switch *ds, |
| struct device_node *dn) |
| { |
| u32 m[2] = { 0, 0 }; |
| int sz; |
| |
| /* Don't error out if this optional property isn't found */ |
| sz = of_property_read_variable_u32_array(dn, "dsa,member", m, 2, 2); |
| if (sz < 0 && sz != -EINVAL) |
| return sz; |
| |
| ds->index = m[1]; |
| |
| ds->dst = dsa_tree_touch(m[0]); |
| if (!ds->dst) |
| return -ENOMEM; |
| |
| if (dsa_switch_find(ds->dst->index, ds->index)) { |
| dev_err(ds->dev, |
| "A DSA switch with index %d already exists in tree %d\n", |
| ds->index, ds->dst->index); |
| return -EEXIST; |
| } |
| |
| if (ds->dst->last_switch < ds->index) |
| ds->dst->last_switch = ds->index; |
| |
| return 0; |
| } |
| |
| static int dsa_switch_touch_ports(struct dsa_switch *ds) |
| { |
| struct dsa_port *dp; |
| int port; |
| |
| for (port = 0; port < ds->num_ports; port++) { |
| dp = dsa_port_touch(ds, port); |
| if (!dp) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int dsa_switch_parse_of(struct dsa_switch *ds, struct device_node *dn) |
| { |
| int err; |
| |
| err = dsa_switch_parse_member_of(ds, dn); |
| if (err) |
| return err; |
| |
| err = dsa_switch_touch_ports(ds); |
| if (err) |
| return err; |
| |
| return dsa_switch_parse_ports_of(ds, dn); |
| } |
| |
| static int dev_is_class(struct device *dev, void *class) |
| { |
| if (dev->class != NULL && !strcmp(dev->class->name, class)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static struct device *dev_find_class(struct device *parent, char *class) |
| { |
| if (dev_is_class(parent, class)) { |
| get_device(parent); |
| return parent; |
| } |
| |
| return device_find_child(parent, class, dev_is_class); |
| } |
| |
| static struct net_device *dsa_dev_to_net_device(struct device *dev) |
| { |
| struct device *d; |
| |
| d = dev_find_class(dev, "net"); |
| if (d != NULL) { |
| struct net_device *nd; |
| |
| nd = to_net_dev(d); |
| dev_hold(nd); |
| put_device(d); |
| |
| return nd; |
| } |
| |
| return NULL; |
| } |
| |
| static int dsa_port_parse(struct dsa_port *dp, const char *name, |
| struct device *dev) |
| { |
| if (!strcmp(name, "cpu")) { |
| struct net_device *conduit; |
| |
| conduit = dsa_dev_to_net_device(dev); |
| if (!conduit) |
| return -EPROBE_DEFER; |
| |
| dev_put(conduit); |
| |
| return dsa_port_parse_cpu(dp, conduit, NULL); |
| } |
| |
| if (!strcmp(name, "dsa")) |
| return dsa_port_parse_dsa(dp); |
| |
| return dsa_port_parse_user(dp, name); |
| } |
| |
| static int dsa_switch_parse_ports(struct dsa_switch *ds, |
| struct dsa_chip_data *cd) |
| { |
| bool valid_name_found = false; |
| struct dsa_port *dp; |
| struct device *dev; |
| const char *name; |
| unsigned int i; |
| int err; |
| |
| for (i = 0; i < DSA_MAX_PORTS; i++) { |
| name = cd->port_names[i]; |
| dev = cd->netdev[i]; |
| dp = dsa_to_port(ds, i); |
| |
| if (!name) |
| continue; |
| |
| err = dsa_port_parse(dp, name, dev); |
| if (err) |
| return err; |
| |
| valid_name_found = true; |
| } |
| |
| if (!valid_name_found && i == DSA_MAX_PORTS) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int dsa_switch_parse(struct dsa_switch *ds, struct dsa_chip_data *cd) |
| { |
| int err; |
| |
| ds->cd = cd; |
| |
| /* We don't support interconnected switches nor multiple trees via |
| * platform data, so this is the unique switch of the tree. |
| */ |
| ds->index = 0; |
| ds->dst = dsa_tree_touch(0); |
| if (!ds->dst) |
| return -ENOMEM; |
| |
| err = dsa_switch_touch_ports(ds); |
| if (err) |
| return err; |
| |
| return dsa_switch_parse_ports(ds, cd); |
| } |
| |
| static void dsa_switch_release_ports(struct dsa_switch *ds) |
| { |
| struct dsa_port *dp, *next; |
| |
| dsa_switch_for_each_port_safe(dp, next, ds) { |
| WARN_ON(!list_empty(&dp->fdbs)); |
| WARN_ON(!list_empty(&dp->mdbs)); |
| WARN_ON(!list_empty(&dp->vlans)); |
| list_del(&dp->list); |
| kfree(dp); |
| } |
| } |
| |
| static int dsa_switch_probe(struct dsa_switch *ds) |
| { |
| struct dsa_switch_tree *dst; |
| struct dsa_chip_data *pdata; |
| struct device_node *np; |
| int err; |
| |
| if (!ds->dev) |
| return -ENODEV; |
| |
| pdata = ds->dev->platform_data; |
| np = ds->dev->of_node; |
| |
| if (!ds->num_ports) |
| return -EINVAL; |
| |
| if (ds->phylink_mac_ops) { |
| if (ds->ops->phylink_mac_select_pcs || |
| ds->ops->phylink_mac_config || |
| ds->ops->phylink_mac_link_down || |
| ds->ops->phylink_mac_link_up) |
| return -EINVAL; |
| } |
| |
| if (np) { |
| err = dsa_switch_parse_of(ds, np); |
| if (err) |
| dsa_switch_release_ports(ds); |
| } else if (pdata) { |
| err = dsa_switch_parse(ds, pdata); |
| if (err) |
| dsa_switch_release_ports(ds); |
| } else { |
| err = -ENODEV; |
| } |
| |
| if (err) |
| return err; |
| |
| dst = ds->dst; |
| dsa_tree_get(dst); |
| err = dsa_tree_setup(dst); |
| if (err) { |
| dsa_switch_release_ports(ds); |
| dsa_tree_put(dst); |
| } |
| |
| return err; |
| } |
| |
| int dsa_register_switch(struct dsa_switch *ds) |
| { |
| int err; |
| |
| mutex_lock(&dsa2_mutex); |
| err = dsa_switch_probe(ds); |
| dsa_tree_put(ds->dst); |
| mutex_unlock(&dsa2_mutex); |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(dsa_register_switch); |
| |
| static void dsa_switch_remove(struct dsa_switch *ds) |
| { |
| struct dsa_switch_tree *dst = ds->dst; |
| |
| dsa_tree_teardown(dst); |
| dsa_switch_release_ports(ds); |
| dsa_tree_put(dst); |
| } |
| |
| void dsa_unregister_switch(struct dsa_switch *ds) |
| { |
| mutex_lock(&dsa2_mutex); |
| dsa_switch_remove(ds); |
| mutex_unlock(&dsa2_mutex); |
| } |
| EXPORT_SYMBOL_GPL(dsa_unregister_switch); |
| |
| /* If the DSA conduit chooses to unregister its net_device on .shutdown, DSA is |
| * blocking that operation from completion, due to the dev_hold taken inside |
| * netdev_upper_dev_link. Unlink the DSA user interfaces from being uppers of |
| * the DSA conduit, so that the system can reboot successfully. |
| */ |
| void dsa_switch_shutdown(struct dsa_switch *ds) |
| { |
| struct net_device *conduit, *user_dev; |
| LIST_HEAD(close_list); |
| struct dsa_port *dp; |
| |
| mutex_lock(&dsa2_mutex); |
| |
| if (!ds->setup) |
| goto out; |
| |
| rtnl_lock(); |
| |
| dsa_switch_for_each_cpu_port(dp, ds) |
| list_add(&dp->conduit->close_list, &close_list); |
| |
| dev_close_many(&close_list, true); |
| |
| dsa_switch_for_each_user_port(dp, ds) { |
| conduit = dsa_port_to_conduit(dp); |
| user_dev = dp->user; |
| |
| netif_device_detach(user_dev); |
| netdev_upper_dev_unlink(conduit, user_dev); |
| } |
| |
| /* Disconnect from further netdevice notifiers on the conduit, |
| * since netdev_uses_dsa() will now return false. |
| */ |
| dsa_switch_for_each_cpu_port(dp, ds) |
| dp->conduit->dsa_ptr = NULL; |
| |
| rtnl_unlock(); |
| out: |
| mutex_unlock(&dsa2_mutex); |
| } |
| EXPORT_SYMBOL_GPL(dsa_switch_shutdown); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static bool dsa_port_is_initialized(const struct dsa_port *dp) |
| { |
| return dp->type == DSA_PORT_TYPE_USER && dp->user; |
| } |
| |
| int dsa_switch_suspend(struct dsa_switch *ds) |
| { |
| struct dsa_port *dp; |
| int ret = 0; |
| |
| /* Suspend user network devices */ |
| dsa_switch_for_each_port(dp, ds) { |
| if (!dsa_port_is_initialized(dp)) |
| continue; |
| |
| ret = dsa_user_suspend(dp->user); |
| if (ret) |
| return ret; |
| } |
| |
| if (ds->ops->suspend) |
| ret = ds->ops->suspend(ds); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(dsa_switch_suspend); |
| |
| int dsa_switch_resume(struct dsa_switch *ds) |
| { |
| struct dsa_port *dp; |
| int ret = 0; |
| |
| if (ds->ops->resume) |
| ret = ds->ops->resume(ds); |
| |
| if (ret) |
| return ret; |
| |
| /* Resume user network devices */ |
| dsa_switch_for_each_port(dp, ds) { |
| if (!dsa_port_is_initialized(dp)) |
| continue; |
| |
| ret = dsa_user_resume(dp->user); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(dsa_switch_resume); |
| #endif |
| |
| struct dsa_port *dsa_port_from_netdev(struct net_device *netdev) |
| { |
| if (!netdev || !dsa_user_dev_check(netdev)) |
| return ERR_PTR(-ENODEV); |
| |
| return dsa_user_to_port(netdev); |
| } |
| EXPORT_SYMBOL_GPL(dsa_port_from_netdev); |
| |
| bool dsa_db_equal(const struct dsa_db *a, const struct dsa_db *b) |
| { |
| if (a->type != b->type) |
| return false; |
| |
| switch (a->type) { |
| case DSA_DB_PORT: |
| return a->dp == b->dp; |
| case DSA_DB_LAG: |
| return a->lag.dev == b->lag.dev; |
| case DSA_DB_BRIDGE: |
| return a->bridge.num == b->bridge.num; |
| default: |
| WARN_ON(1); |
| return false; |
| } |
| } |
| |
| bool dsa_fdb_present_in_other_db(struct dsa_switch *ds, int port, |
| const unsigned char *addr, u16 vid, |
| struct dsa_db db) |
| { |
| struct dsa_port *dp = dsa_to_port(ds, port); |
| struct dsa_mac_addr *a; |
| |
| lockdep_assert_held(&dp->addr_lists_lock); |
| |
| list_for_each_entry(a, &dp->fdbs, list) { |
| if (!ether_addr_equal(a->addr, addr) || a->vid != vid) |
| continue; |
| |
| if (a->db.type == db.type && !dsa_db_equal(&a->db, &db)) |
| return true; |
| } |
| |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(dsa_fdb_present_in_other_db); |
| |
| bool dsa_mdb_present_in_other_db(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb, |
| struct dsa_db db) |
| { |
| struct dsa_port *dp = dsa_to_port(ds, port); |
| struct dsa_mac_addr *a; |
| |
| lockdep_assert_held(&dp->addr_lists_lock); |
| |
| list_for_each_entry(a, &dp->mdbs, list) { |
| if (!ether_addr_equal(a->addr, mdb->addr) || a->vid != mdb->vid) |
| continue; |
| |
| if (a->db.type == db.type && !dsa_db_equal(&a->db, &db)) |
| return true; |
| } |
| |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(dsa_mdb_present_in_other_db); |
| |
| static const struct dsa_stubs __dsa_stubs = { |
| .conduit_hwtstamp_validate = __dsa_conduit_hwtstamp_validate, |
| }; |
| |
| static void dsa_register_stubs(void) |
| { |
| dsa_stubs = &__dsa_stubs; |
| } |
| |
| static void dsa_unregister_stubs(void) |
| { |
| dsa_stubs = NULL; |
| } |
| |
| static int __init dsa_init_module(void) |
| { |
| int rc; |
| |
| dsa_owq = alloc_ordered_workqueue("dsa_ordered", |
| WQ_MEM_RECLAIM); |
| if (!dsa_owq) |
| return -ENOMEM; |
| |
| rc = dsa_user_register_notifier(); |
| if (rc) |
| goto register_notifier_fail; |
| |
| dev_add_pack(&dsa_pack_type); |
| |
| rc = rtnl_link_register(&dsa_link_ops); |
| if (rc) |
| goto netlink_register_fail; |
| |
| dsa_register_stubs(); |
| |
| return 0; |
| |
| netlink_register_fail: |
| dsa_user_unregister_notifier(); |
| dev_remove_pack(&dsa_pack_type); |
| register_notifier_fail: |
| destroy_workqueue(dsa_owq); |
| |
| return rc; |
| } |
| module_init(dsa_init_module); |
| |
| static void __exit dsa_cleanup_module(void) |
| { |
| dsa_unregister_stubs(); |
| |
| rtnl_link_unregister(&dsa_link_ops); |
| |
| dsa_user_unregister_notifier(); |
| dev_remove_pack(&dsa_pack_type); |
| destroy_workqueue(dsa_owq); |
| } |
| module_exit(dsa_cleanup_module); |
| |
| MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); |
| MODULE_DESCRIPTION("Driver for Distributed Switch Architecture switch chips"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:dsa"); |