| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/phy.h> |
| #include <linux/ethtool_netlink.h> |
| |
| #include "netlink.h" |
| #include "common.h" |
| |
| struct plca_req_info { |
| struct ethnl_req_info base; |
| }; |
| |
| struct plca_reply_data { |
| struct ethnl_reply_data base; |
| struct phy_plca_cfg plca_cfg; |
| struct phy_plca_status plca_st; |
| }; |
| |
| // Helpers ------------------------------------------------------------------ // |
| |
| #define PLCA_REPDATA(__reply_base) \ |
| container_of(__reply_base, struct plca_reply_data, base) |
| |
| // PLCA get configuration message ------------------------------------------- // |
| |
| const struct nla_policy ethnl_plca_get_cfg_policy[] = { |
| [ETHTOOL_A_PLCA_HEADER] = |
| NLA_POLICY_NESTED(ethnl_header_policy_phy), |
| }; |
| |
| static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid, |
| bool *mod) |
| { |
| const struct nlattr *attr = tb[attrid]; |
| |
| if (!attr || |
| WARN_ON_ONCE(attrid >= ARRAY_SIZE(ethnl_plca_set_cfg_policy))) |
| return; |
| |
| switch (ethnl_plca_set_cfg_policy[attrid].type) { |
| case NLA_U8: |
| *dst = nla_get_u8(attr); |
| break; |
| case NLA_U32: |
| *dst = nla_get_u32(attr); |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| |
| *mod = true; |
| } |
| |
| static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, |
| struct ethnl_reply_data *reply_base, |
| const struct genl_info *info) |
| { |
| struct plca_reply_data *data = PLCA_REPDATA(reply_base); |
| struct net_device *dev = reply_base->dev; |
| const struct ethtool_phy_ops *ops; |
| struct nlattr **tb = info->attrs; |
| struct phy_device *phydev; |
| int ret; |
| |
| phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PLCA_HEADER], |
| info->extack); |
| // check that the PHY device is available and connected |
| if (IS_ERR_OR_NULL(phydev)) { |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| // note: rtnl_lock is held already by ethnl_default_doit |
| ops = ethtool_phy_ops; |
| if (!ops || !ops->get_plca_cfg) { |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| ret = ethnl_ops_begin(dev); |
| if (ret < 0) |
| goto out; |
| |
| memset(&data->plca_cfg, 0xff, |
| sizeof_field(struct plca_reply_data, plca_cfg)); |
| |
| ret = ops->get_plca_cfg(phydev, &data->plca_cfg); |
| ethnl_ops_complete(dev); |
| |
| out: |
| return ret; |
| } |
| |
| static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base, |
| const struct ethnl_reply_data *reply_base) |
| { |
| return nla_total_size(sizeof(u16)) + /* _VERSION */ |
| nla_total_size(sizeof(u8)) + /* _ENABLED */ |
| nla_total_size(sizeof(u32)) + /* _NODE_CNT */ |
| nla_total_size(sizeof(u32)) + /* _NODE_ID */ |
| nla_total_size(sizeof(u32)) + /* _TO_TIMER */ |
| nla_total_size(sizeof(u32)) + /* _BURST_COUNT */ |
| nla_total_size(sizeof(u32)); /* _BURST_TIMER */ |
| } |
| |
| static int plca_get_cfg_fill_reply(struct sk_buff *skb, |
| const struct ethnl_req_info *req_base, |
| const struct ethnl_reply_data *reply_base) |
| { |
| const struct plca_reply_data *data = PLCA_REPDATA(reply_base); |
| const struct phy_plca_cfg *plca = &data->plca_cfg; |
| |
| if ((plca->version >= 0 && |
| nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, plca->version)) || |
| (plca->enabled >= 0 && |
| nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) || |
| (plca->node_id >= 0 && |
| nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_ID, plca->node_id)) || |
| (plca->node_cnt >= 0 && |
| nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_CNT, plca->node_cnt)) || |
| (plca->to_tmr >= 0 && |
| nla_put_u32(skb, ETHTOOL_A_PLCA_TO_TMR, plca->to_tmr)) || |
| (plca->burst_cnt >= 0 && |
| nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_CNT, plca->burst_cnt)) || |
| (plca->burst_tmr >= 0 && |
| nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_TMR, plca->burst_tmr))) |
| return -EMSGSIZE; |
| |
| return 0; |
| }; |
| |
| // PLCA set configuration message ------------------------------------------- // |
| |
| const struct nla_policy ethnl_plca_set_cfg_policy[] = { |
| [ETHTOOL_A_PLCA_HEADER] = |
| NLA_POLICY_NESTED(ethnl_header_policy_phy), |
| [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), |
| [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), |
| [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), |
| [ETHTOOL_A_PLCA_TO_TMR] = NLA_POLICY_MAX(NLA_U32, 255), |
| [ETHTOOL_A_PLCA_BURST_CNT] = NLA_POLICY_MAX(NLA_U32, 255), |
| [ETHTOOL_A_PLCA_BURST_TMR] = NLA_POLICY_MAX(NLA_U32, 255), |
| }; |
| |
| static int |
| ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) |
| { |
| const struct ethtool_phy_ops *ops; |
| struct nlattr **tb = info->attrs; |
| struct phy_plca_cfg plca_cfg; |
| struct phy_device *phydev; |
| bool mod = false; |
| int ret; |
| |
| phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PLCA_HEADER], |
| info->extack); |
| // check that the PHY device is available and connected |
| if (IS_ERR_OR_NULL(phydev)) |
| return -EOPNOTSUPP; |
| |
| ops = ethtool_phy_ops; |
| if (!ops || !ops->set_plca_cfg) |
| return -EOPNOTSUPP; |
| |
| memset(&plca_cfg, 0xff, sizeof(plca_cfg)); |
| plca_update_sint(&plca_cfg.enabled, tb, ETHTOOL_A_PLCA_ENABLED, &mod); |
| plca_update_sint(&plca_cfg.node_id, tb, ETHTOOL_A_PLCA_NODE_ID, &mod); |
| plca_update_sint(&plca_cfg.node_cnt, tb, ETHTOOL_A_PLCA_NODE_CNT, &mod); |
| plca_update_sint(&plca_cfg.to_tmr, tb, ETHTOOL_A_PLCA_TO_TMR, &mod); |
| plca_update_sint(&plca_cfg.burst_cnt, tb, ETHTOOL_A_PLCA_BURST_CNT, |
| &mod); |
| plca_update_sint(&plca_cfg.burst_tmr, tb, ETHTOOL_A_PLCA_BURST_TMR, |
| &mod); |
| if (!mod) |
| return 0; |
| |
| ret = ops->set_plca_cfg(phydev, &plca_cfg, info->extack); |
| return ret < 0 ? ret : 1; |
| } |
| |
| const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { |
| .request_cmd = ETHTOOL_MSG_PLCA_GET_CFG, |
| .reply_cmd = ETHTOOL_MSG_PLCA_GET_CFG_REPLY, |
| .hdr_attr = ETHTOOL_A_PLCA_HEADER, |
| .req_info_size = sizeof(struct plca_req_info), |
| .reply_data_size = sizeof(struct plca_reply_data), |
| |
| .prepare_data = plca_get_cfg_prepare_data, |
| .reply_size = plca_get_cfg_reply_size, |
| .fill_reply = plca_get_cfg_fill_reply, |
| |
| .set = ethnl_set_plca, |
| .set_ntf_cmd = ETHTOOL_MSG_PLCA_NTF, |
| }; |
| |
| // PLCA get status message -------------------------------------------------- // |
| |
| const struct nla_policy ethnl_plca_get_status_policy[] = { |
| [ETHTOOL_A_PLCA_HEADER] = |
| NLA_POLICY_NESTED(ethnl_header_policy_phy), |
| }; |
| |
| static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, |
| struct ethnl_reply_data *reply_base, |
| const struct genl_info *info) |
| { |
| struct plca_reply_data *data = PLCA_REPDATA(reply_base); |
| struct net_device *dev = reply_base->dev; |
| const struct ethtool_phy_ops *ops; |
| struct nlattr **tb = info->attrs; |
| struct phy_device *phydev; |
| int ret; |
| |
| phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PLCA_HEADER], |
| info->extack); |
| // check that the PHY device is available and connected |
| if (IS_ERR_OR_NULL(phydev)) { |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| // note: rtnl_lock is held already by ethnl_default_doit |
| ops = ethtool_phy_ops; |
| if (!ops || !ops->get_plca_status) { |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| ret = ethnl_ops_begin(dev); |
| if (ret < 0) |
| goto out; |
| |
| memset(&data->plca_st, 0xff, |
| sizeof_field(struct plca_reply_data, plca_st)); |
| |
| ret = ops->get_plca_status(phydev, &data->plca_st); |
| ethnl_ops_complete(dev); |
| out: |
| return ret; |
| } |
| |
| static int plca_get_status_reply_size(const struct ethnl_req_info *req_base, |
| const struct ethnl_reply_data *reply_base) |
| { |
| return nla_total_size(sizeof(u8)); /* _STATUS */ |
| } |
| |
| static int plca_get_status_fill_reply(struct sk_buff *skb, |
| const struct ethnl_req_info *req_base, |
| const struct ethnl_reply_data *reply_base) |
| { |
| const struct plca_reply_data *data = PLCA_REPDATA(reply_base); |
| const u8 status = data->plca_st.pst; |
| |
| if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status)) |
| return -EMSGSIZE; |
| |
| return 0; |
| }; |
| |
| const struct ethnl_request_ops ethnl_plca_status_request_ops = { |
| .request_cmd = ETHTOOL_MSG_PLCA_GET_STATUS, |
| .reply_cmd = ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, |
| .hdr_attr = ETHTOOL_A_PLCA_HEADER, |
| .req_info_size = sizeof(struct plca_req_info), |
| .reply_data_size = sizeof(struct plca_reply_data), |
| |
| .prepare_data = plca_get_status_prepare_data, |
| .reply_size = plca_get_status_reply_size, |
| .fill_reply = plca_get_status_fill_reply, |
| }; |